JunMo Hong / EV-COG-AD3029LZ

센서보드 RF IRQ 테스트 중

Fork of stm-spirit1-rf-driver by ST

Revisions of source/SimpleSpirit1.cpp

Revision Date Message Actions
65:a16f0064110a 2017-07-03 Delay setting of `expecting_ack` to when TX was successful File  Diff  Annotate
64:28ef790e4ef7 2017-07-03 Implement indications received by Kevin Bracey File  Diff  Annotate
60:956afcef7ef7 2017-05-31 Set SPI speed to 10MHz (i.e. max speed allowed for Spirit1) File  Diff  Annotate
57:8cc871dc6cac 2017-04-28 `UnlockedSPI` is used to be able to call SPI functions from IRQ conetxt File  Diff  Annotate
49:d017830c0c67 2017-02-06 Do not read IRQ status twice File  Diff  Annotate
48:373e1b7e424f 2017-01-12 Insert 'MAX_PACKET_LEN' checks when receiving File  Diff  Annotate
47:3a30b960a8c2 2016-12-22 Optimize IRQ handler File  Diff  Annotate
46:d104e58c5caf 2016-12-19 Remove 'RX_DONE' handling in 'IRQ_RX_FIFO_ALMOST_FULL' File  Diff  Annotate
45:2d01cc9bc761 2016-12-19 Return to avoidance of FIFO overflows File  Diff  Annotate
44:aedd63cb0ce3 2016-12-16 Set 'MAX_PACKET_LEN' to 128 File  Diff  Annotate
43:a512f909514a 2016-12-16 Backup commit! File  Diff  Annotate
42:92a60a905ee7 2016-12-02 Double check for IRQ sources File  Diff  Annotate
40:343254875d89 2016-11-29 Handle RX errors immediately & use channel 1 File  Diff  Annotate
39:75481c4c6655 2016-11-24 Treat RX/TX race condition in favor of TX File  Diff  Annotate
37:bc043030b55a 2016-11-22 Adapt timeout periods File  Diff  Annotate
34:edda6a7238ec 2016-11-22 Perform re-naming File  Diff  Annotate