센서보드 RF IRQ 테스트 중

Fork of stm-spirit1-rf-driver by ST

Revision:
78:65de72417cd3
Parent:
77:a9a9807bf3ed
Child:
81:b16caa776548
--- a/source/libs/Contiki_STM32_Library/hw-config.h	Thu Jan 18 15:07:23 2018 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,125 +0,0 @@
- /**
-  ******************************************************************************
-  * @file    hw-config.h
-  * @author  System LAB 
- * @version V1.0.0
- * @date    17-May-2015
-  * @brief   Header file for Hardware Configuration & Setup
-  ******************************************************************************
-  * @attention
-  *
- * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
-  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-/*---------------------------------------------------------------------------*/
-#ifndef __HW_CONFIG_H
-#define __HW_CONFIG_H
-/*---------------------------------------------------------------------------*/
-#include "stm32l-spirit1-config.h"
-/*---------------------------------------------------------------------------*/
-#define UART_RxBufferSize    512
-/*---------------------------------------------------------------------------*/    
-#define I2Cx                            I2C1
-#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
-#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
-#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
-/*---------------------------------------------------------------------------*/
-#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
-#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
-/*---------------------------------------------------------------------------*/
-/* Definition for I2Cx Pins */
-#define I2Cx_SCL_PIN                    GPIO_PIN_8
-#define I2Cx_SCL_GPIO_PORT              GPIOB
-#define I2Cx_SDA_PIN                    GPIO_PIN_9
-#define I2Cx_SDA_GPIO_PORT              GPIOB
-#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1
-
-/* Definition for I2Cx's NVIC */
-#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
-#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
-#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
-#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler
-
-  
-#define I2Cx                            I2C1
-#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
-#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
-#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
-
-#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
-#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
-
-/* Definition for I2Cx Pins */
-#define I2Cx_SCL_PIN                    GPIO_PIN_8
-#define I2Cx_SCL_GPIO_PORT              GPIOB
-#define I2Cx_SDA_PIN                    GPIO_PIN_9
-#define I2Cx_SDA_GPIO_PORT              GPIOB
-#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1
-
-/* Definition for I2Cx's NVIC */
-#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
-#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
-#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
-#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler
-
-/* User can use this section to tailor USARTx/UARTx instance used and associated
-   resources */
-/* Definition for USARTx clock resources */
-#define USARTx                           USART2
-#define USARTx_CLK_ENABLE()              __USART2_CLK_ENABLE();
-#define DMAx_CLK_ENABLE()                __DMA1_CLK_ENABLE()
-#define USARTx_RX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
-#define USARTx_TX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
-
-#define USARTx_FORCE_RESET()             __USART2_FORCE_RESET()
-#define USARTx_RELEASE_RESET()           __USART2_RELEASE_RESET()
-
-/* Definition for USARTx Pins */
-#define USARTx_TX_PIN                    GPIO_PIN_2
-#define USARTx_TX_GPIO_PORT              GPIOA
-
-#define USARTx_RX_PIN                    GPIO_PIN_3
-#define USARTx_RX_GPIO_PORT              GPIOA
-
-     /* Definition for USARTx's NVIC */
-#define USARTx_IRQn                      USART2_IRQn
-#define USARTx_IRQHandler                USART2_IRQHandler
-
-#define USARTx_TX_AF                     GPIO_AF7_USART2 
-#define USARTx_RX_AF                     GPIO_AF7_USART2
-
-
-  /* Enable sensor mask */
-#define PRESSURE_SENSOR                         0x00000001
-#define TEMPERATURE_SENSOR                      0x00000002
-#define HUMIDITY_SENSOR                         0x00000004
-#define UV_SENSOR                               0x00000008  
-#define ACCELEROMETER_SENSOR                    0x00000010  
-#define GYROSCOPE_SENSOR                        0x00000020
-#define MAGNETIC_SENSOR                         0x00000040      
-/*---------------------------------------------------------------------------*/
-#endif  /*__HW_CONFIG_H*/
-/*---------------------------------------------------------------------------*/