![](/media/cache/profiles/0f0ee3310223fe38a989b2c818709393.50x50_q85.jpg)
Command all jmCLIG modules from serial port
jmMotor.h
- Committer:
- jm
- Date:
- 2011-02-12
- Revision:
- 0:9112e09912db
File content as of revision 0:9112e09912db:
/************************************************************************* * @file jmMotor.h * @brief Control motor drive, direction and repetition on mbed DIP5 to 30. * Up to 4 motors can be controlled at the same time. * * @version 1.0 * @date Feb 12, 2011 */ /* * Module Command Line Interface Format: command name (arg info)min..max values [optional argument] motor (Motor ID)0..3 (Direction Pin)0..432 (Drive Pin)0..432 (Rotation cw/ccw)0..1 (tOn)0..255 (tOff)0..255 (Cycles)[1..65535] * Module Events On terminating cycles, send Message: GPPMT id dirPin drivePinB tOn tOff status * Module Feedback and Help messages may be enabled/disabled by Command Lines. feedback (enable/disable)0..1 help (enable/disable)0..1 */ #ifndef Motordef #define Motordef 1 #define motorQty 4 // max number of motor #include "LPC17xx.h" // Module Data Structure extern struct StructMotor{ uint8_t active; uint8_t direction; uint8_t tOff; uint8_t tOn; uint8_t state; uint16_t dirPin; uint16_t drivePin; uint16_t eggTimer; uint16_t cycles; uint32_t dirBitValue; LPC_GPIO_TypeDef * dirPort; uint32_t driveBitValue; LPC_GPIO_TypeDef * drivePort; }sMotor[motorQty]; #endif // Module Prototypes void cli_Motor(void); void MotorInit(void); void MotorSM(void); void cli_MotorSpeed(void); void cli_GPPMT(void); void rGPPMT(unsigned int id); //-------------------------- CLIG PLUGS -------------------- // CLIG-INCLUDE /* #include "jmMotor.h" */ // CLIG-CMD /* motor cli_Motor(); GPPMT cli_GPPMT(); motorSpeed cli_MotorSpeed(); */ // CLIG-INIT /* MotorInit(); */ // CLIG-TIMER /* // Module jmMotor for(i=0;i<motorQty;i++)if(sMotor[i].eggTimer>0)sMotor[i].eggTimer--; */ // CLIG-SM /* MotorSM(); */