File content as of revision 11:6277845e1cc5:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "nRF51GattServer.h"
#include "mbed.h"

#include "common/common.h"
#include "btle/custom/custom_helper.h"

#include "nRF51Gap.h"

/**************************************************************************/
/*!
    @brief  Adds a new service to the GATT table on the peripheral

    @returns    ble_error_t

    @retval     BLE_ERROR_NONE
                Everything executed properly

    @section EXAMPLE

    @code

    @endcode
*/
/**************************************************************************/
ble_error_t nRF51GattServer::addService(GattService & service)
{
    /* ToDo: Make sure we don't overflow the array, etc. */
    /* ToDo: Make sure this service UUID doesn't already exist (?) */
    /* ToDo: Basic validation */

    /* Add the service to the nRF51 */
    ble_uuid_t nordicUUID;
    nordicUUID = custom_convert_to_transport_uuid(service.primaryServiceID);
    ASSERT( ERROR_NONE ==
            sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
                                     &nordicUUID,
                                     &service.handle),
            BLE_ERROR_PARAM_OUT_OF_RANGE );

    /* Add characteristics to the service */
    for (uint8_t i = 0; i < service.characteristicCount; i++) {
        GattCharacteristic *p_char = service.characteristics[i];

        nordicUUID = custom_convert_to_transport_uuid(p_char->uuid);

        ASSERT ( ERROR_NONE ==
                 custom_add_in_characteristic(service.handle,
                                              &nordicUUID,
                                              p_char->properties,
                                              NULL,
                                              p_char->lenMin,
                                              p_char->lenMax,
                                              &nrfCharacteristicHandles[
                                                  characteristicCount]),
                 BLE_ERROR_PARAM_OUT_OF_RANGE );

        /* Update the characteristic handle */
        p_char->handle                           = characteristicCount;
        p_characteristics[characteristicCount++] = p_char;
    }

    serviceCount++;

    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Reads the value of a characteristic, based on the service
            and characteristic index fields

    @param[in]  charHandle
                The handle of the GattCharacteristic to read from
    @param[in]  buffer
                Buffer to hold the the characteristic's value
                (raw byte array in LSB format)
    @param[in]  len
                The number of bytes read into the buffer

    @returns    ble_error_t

    @retval     BLE_ERROR_NONE
                Everything executed properly

    @section EXAMPLE

    @code

    @endcode
*/
/**************************************************************************/
ble_error_t nRF51GattServer::readValue(uint16_t charHandle,
                                       uint8_t  buffer[],
                                       uint16_t len)
{
    ASSERT( ERROR_NONE ==
            sd_ble_gatts_value_get(nrfCharacteristicHandles[charHandle].
                                   value_handle, 0,
                                   &len, buffer), BLE_ERROR_PARAM_OUT_OF_RANGE);

    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Updates the value of a characteristic, based on the service
            and characteristic index fields

    @param[in]  charHandle
                The handle of the GattCharacteristic to write to
    @param[in]  buffer
                Data to use when updating the characteristic's value
                (raw byte array in LSB format)
    @param[in]  len
                The number of bytes in buffer

    @returns    ble_error_t

    @retval     BLE_ERROR_NONE
                Everything executed properly

    @section EXAMPLE

    @code

    @endcode
*/
/**************************************************************************/
ble_error_t nRF51GattServer::updateValue(uint16_t charHandle,
                                         uint8_t  buffer[],
                                         uint16_t len,
                                         bool     localOnly)
{
    uint16_t gapConnectionHandle =
        nRF51Gap::getInstance().getConnectionHandle();

    if (localOnly) {
        /* Only update locally regardless of notify/indicate */
        ASSERT_INT( ERROR_NONE,
                    sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].
                                           value_handle,
                                           0,
                                           &len,
                                           buffer),
                    BLE_ERROR_PARAM_OUT_OF_RANGE );
    }

    if ((p_characteristics[charHandle]->properties &
         (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE |
          GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
        (gapConnectionHandle != BLE_CONN_HANDLE_INVALID)) {
        /* HVX update for the characteristic value */
        ble_gatts_hvx_params_t hvx_params;

        hvx_params.handle = nrfCharacteristicHandles[charHandle].value_handle;
        hvx_params.type   =
            (p_characteristics[charHandle]->properties &
             GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)  ?
            BLE_GATT_HVX_NOTIFICATION : BLE_GATT_HVX_INDICATION;
        hvx_params.offset = 0;
        hvx_params.p_data = buffer;
        hvx_params.p_len  = &len;

        error_t error = (error_t) sd_ble_gatts_hvx(gapConnectionHandle,
                                                   &hvx_params);

        /* ERROR_INVALID_STATE, ERROR_BUSY, ERROR_GATTS_SYS_ATTR_MISSING and
         *ERROR_NO_TX_BUFFERS the ATT table has been updated. */
        if ((error != ERROR_NONE) && (error != ERROR_INVALID_STATE) &&
            (error != ERROR_BLE_NO_TX_BUFFERS) && (error != ERROR_BUSY) &&
            (error != ERROR_BLEGATTS_SYS_ATTR_MISSING)) {
            ASSERT_INT( ERROR_NONE,
                        sd_ble_gatts_value_set(nrfCharacteristicHandles[
                                                   charHandle].
                                               value_handle,
                                               0,
                                               &len,
                                               buffer),
                        BLE_ERROR_PARAM_OUT_OF_RANGE );
        }
    } else {
        ASSERT_INT( ERROR_NONE,
                    sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].
                                           value_handle,
                                           0,
                                           &len,
                                           buffer),
                    BLE_ERROR_PARAM_OUT_OF_RANGE );
    }

    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Callback handler for events getting pushed up from the SD
*/
/**************************************************************************/
void nRF51GattServer::hwCallback(ble_evt_t *p_ble_evt)
{
    uint16_t                      handle_value;
    GattServerEvents::gattEvent_t event;

    switch (p_ble_evt->header.evt_id) {
    case BLE_GATTS_EVT_WRITE:
        /* There are 2 use case here: Values being updated & CCCD
         *(indicate/notify) enabled */

        /* 1.) Handle CCCD changes */
        handle_value = p_ble_evt->evt.gatts_evt.params.write.handle;
        for (uint8_t i = 0; i<characteristicCount; i++) {
            if ((p_characteristics[i]->properties &
                 (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE |
                  GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
                (nrfCharacteristicHandles[i].cccd_handle == handle_value)) {
                uint16_t cccd_value =
                    (p_ble_evt->evt.gatts_evt.params.write.data[1] <<
                    8) | p_ble_evt->evt.gatts_evt.params.write.data[0]; /*
                                                    * Little Endian but M0 may
                                                    * be mis-aligned */

                if (((p_characteristics[i]->properties &
                      GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE) &&
                     (cccd_value & BLE_GATT_HVX_INDICATION)) ||
                    ((p_characteristics[i]->properties &
                      GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) &&
                     (cccd_value & BLE_GATT_HVX_NOTIFICATION))) {
                    event = GattServerEvents::GATT_EVENT_UPDATES_ENABLED;
                } else {
                    event = GattServerEvents::GATT_EVENT_UPDATES_DISABLED;
                }

                handleEvent(event, i);
                return;
            }
        }

        /* 2.) Changes to the characteristic value will be handled with other
         *events below */
        event = GattServerEvents::GATT_EVENT_DATA_WRITTEN;
        break;

    case BLE_GATTS_EVT_HVC:
        /* Indication confirmation received */
        event        = GattServerEvents::GATT_EVENT_CONFIRMATION_RECEIVED;
        handle_value = p_ble_evt->evt.gatts_evt.params.hvc.handle;
        break;

    default:
        return;
    }

    /* Find index (charHandle) in the pool */
    for (uint8_t i = 0; i<characteristicCount; i++) {
        if (nrfCharacteristicHandles[i].value_handle == handle_value) {
            handleEvent(event, i);
            break;
        }
    }
}