Junichi Katsu
ADKに対応していないAndroid端末にマイコンを繋いでADBインターフェースで通信できるMicroBridgeのmbed移植版。 mbedに繋いだサーボをAndroid端末から動かすサンプルプログラムです。 とりあえず暫定バージョンを公開します。 Dev Phone 1でのみ動作確認をしています。 USBのインターフェース番号を固定しているので他で繋がるかわかりません。
USBHost/USBHost_log.cpp@0:dde3f92088d5, 2011-08-21 (annotated)
- Committer:
- jksoft
- Date:
- Sun Aug 21 14:36:35 2011 +0000
- Revision:
- 0:dde3f92088d5
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| jksoft | 0:dde3f92088d5 | 1 | |
| jksoft | 0:dde3f92088d5 | 2 | /* |
| jksoft | 0:dde3f92088d5 | 3 | Copyright (c) 2010 Peter Barrett |
| jksoft | 0:dde3f92088d5 | 4 | |
| jksoft | 0:dde3f92088d5 | 5 | Permission is hereby granted, free of charge, to any person obtaining a copy |
| jksoft | 0:dde3f92088d5 | 6 | of this software and associated documentation files (the "Software"), to deal |
| jksoft | 0:dde3f92088d5 | 7 | in the Software without restriction, including without limitation the rights |
| jksoft | 0:dde3f92088d5 | 8 | to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| jksoft | 0:dde3f92088d5 | 9 | copies of the Software, and to permit persons to whom the Software is |
| jksoft | 0:dde3f92088d5 | 10 | furnished to do so, subject to the following conditions: |
| jksoft | 0:dde3f92088d5 | 11 | |
| jksoft | 0:dde3f92088d5 | 12 | The above copyright notice and this permission notice shall be included in |
| jksoft | 0:dde3f92088d5 | 13 | all copies or substantial portions of the Software. |
| jksoft | 0:dde3f92088d5 | 14 | |
| jksoft | 0:dde3f92088d5 | 15 | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| jksoft | 0:dde3f92088d5 | 16 | IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| jksoft | 0:dde3f92088d5 | 17 | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| jksoft | 0:dde3f92088d5 | 18 | AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| jksoft | 0:dde3f92088d5 | 19 | LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| jksoft | 0:dde3f92088d5 | 20 | OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| jksoft | 0:dde3f92088d5 | 21 | THE SOFTWARE. |
| jksoft | 0:dde3f92088d5 | 22 | */ |
| jksoft | 0:dde3f92088d5 | 23 | |
| jksoft | 0:dde3f92088d5 | 24 | |
| jksoft | 0:dde3f92088d5 | 25 | #include "mbed.h" |
| jksoft | 0:dde3f92088d5 | 26 | #include "USBHost.h" |
| jksoft | 0:dde3f92088d5 | 27 | //#define USBHOST_LOG |
| jksoft | 0:dde3f92088d5 | 28 | #ifdef USBHOST_LOG |
| jksoft | 0:dde3f92088d5 | 29 | |
| jksoft | 0:dde3f92088d5 | 30 | // Config (default uses x bytes) |
| jksoft | 0:dde3f92088d5 | 31 | #define MAX_DEVICES 8 // Max number of devices |
| jksoft | 0:dde3f92088d5 | 32 | #define MAX_ENDPOINTS_TOTAL 16 // Max number of endpoints total |
| jksoft | 0:dde3f92088d5 | 33 | #define MAX_ENDPOINTS_PER_DEVICE 8 // Max number of endpoints for any one device |
| jksoft | 0:dde3f92088d5 | 34 | |
| jksoft | 0:dde3f92088d5 | 35 | #define USBLOG 1 |
| jksoft | 0:dde3f92088d5 | 36 | #if USBLOG |
| jksoft | 0:dde3f92088d5 | 37 | #define LOG(...) printf(__VA_ARGS__) |
| jksoft | 0:dde3f92088d5 | 38 | #else |
| jksoft | 0:dde3f92088d5 | 39 | #define LOG(...) do {} while(0) |
| jksoft | 0:dde3f92088d5 | 40 | #endif |
| jksoft | 0:dde3f92088d5 | 41 | |
| jksoft | 0:dde3f92088d5 | 42 | // USB host structures |
| jksoft | 0:dde3f92088d5 | 43 | |
| jksoft | 0:dde3f92088d5 | 44 | #define USB_RAM_SIZE 16*1024 // AHB SRAM block 1 TODO MACHINE DEPENDENT |
| jksoft | 0:dde3f92088d5 | 45 | #define USB_RAM_BASE 0x2007C000 |
| jksoft | 0:dde3f92088d5 | 46 | |
| jksoft | 0:dde3f92088d5 | 47 | #define TOKEN_SETUP 0 |
| jksoft | 0:dde3f92088d5 | 48 | #define TOKEN_IN 1 |
| jksoft | 0:dde3f92088d5 | 49 | #define TOKEN_OUT 2 |
| jksoft | 0:dde3f92088d5 | 50 | |
| jksoft | 0:dde3f92088d5 | 51 | // Status flags from hub |
| jksoft | 0:dde3f92088d5 | 52 | #define PORT_CONNECTION 0 |
| jksoft | 0:dde3f92088d5 | 53 | #define PORT_ENABLE 1 |
| jksoft | 0:dde3f92088d5 | 54 | #define PORT_SUSPEND 2 |
| jksoft | 0:dde3f92088d5 | 55 | #define PORT_OVER_CURRENT 3 |
| jksoft | 0:dde3f92088d5 | 56 | #define PORT_RESET 4 |
| jksoft | 0:dde3f92088d5 | 57 | #define PORT_POWER 8 |
| jksoft | 0:dde3f92088d5 | 58 | #define PORT_LOW_SPEED 9 |
| jksoft | 0:dde3f92088d5 | 59 | |
| jksoft | 0:dde3f92088d5 | 60 | #define C_PORT_CONNECTION 16 |
| jksoft | 0:dde3f92088d5 | 61 | #define C_PORT_ENABLE 17 |
| jksoft | 0:dde3f92088d5 | 62 | #define C_PORT_SUSPEND 18 |
| jksoft | 0:dde3f92088d5 | 63 | #define C_PORT_OVER_CURRENT 19 |
| jksoft | 0:dde3f92088d5 | 64 | #define C_PORT_RESET 20 |
| jksoft | 0:dde3f92088d5 | 65 | |
| jksoft | 0:dde3f92088d5 | 66 | typedef struct { |
| jksoft | 0:dde3f92088d5 | 67 | u8 bm_request_type; |
| jksoft | 0:dde3f92088d5 | 68 | u8 b_request; |
| jksoft | 0:dde3f92088d5 | 69 | u16 w_value; |
| jksoft | 0:dde3f92088d5 | 70 | u16 w_index; |
| jksoft | 0:dde3f92088d5 | 71 | u16 w_length; |
| jksoft | 0:dde3f92088d5 | 72 | } Setup; |
| jksoft | 0:dde3f92088d5 | 73 | |
| jksoft | 0:dde3f92088d5 | 74 | |
| jksoft | 0:dde3f92088d5 | 75 | // Hub stuff is kept private just to keep api simple |
| jksoft | 0:dde3f92088d5 | 76 | int SetPortFeature(int device, int feature, int index); |
| jksoft | 0:dde3f92088d5 | 77 | int ClearPortFeature(int device, int feature, int index); |
| jksoft | 0:dde3f92088d5 | 78 | int SetPortPower(int device, int port); |
| jksoft | 0:dde3f92088d5 | 79 | int SetPortReset(int device, int port); |
| jksoft | 0:dde3f92088d5 | 80 | int GetPortStatus(int device, int port, u32* status); |
| jksoft | 0:dde3f92088d5 | 81 | |
| jksoft | 0:dde3f92088d5 | 82 | //=================================================================== |
| jksoft | 0:dde3f92088d5 | 83 | //=================================================================== |
| jksoft | 0:dde3f92088d5 | 84 | // Hardware defines |
| jksoft | 0:dde3f92088d5 | 85 | |
| jksoft | 0:dde3f92088d5 | 86 | // HcControl |
| jksoft | 0:dde3f92088d5 | 87 | #define PeriodicListEnable 0x00000004 |
| jksoft | 0:dde3f92088d5 | 88 | #define IsochronousEnable 0x00000008 |
| jksoft | 0:dde3f92088d5 | 89 | #define ControlListEnable 0x00000010 |
| jksoft | 0:dde3f92088d5 | 90 | #define BulkListEnable 0x00000020 |
| jksoft | 0:dde3f92088d5 | 91 | #define OperationalMask 0x00000080 |
| jksoft | 0:dde3f92088d5 | 92 | #define HostControllerFunctionalState 0x000000C0 |
| jksoft | 0:dde3f92088d5 | 93 | |
| jksoft | 0:dde3f92088d5 | 94 | // HcCommandStatus |
| jksoft | 0:dde3f92088d5 | 95 | #define HostControllerReset 0x00000001 |
| jksoft | 0:dde3f92088d5 | 96 | #define ControlListFilled 0x00000002 |
| jksoft | 0:dde3f92088d5 | 97 | #define BulkListFilled 0x00000004 |
| jksoft | 0:dde3f92088d5 | 98 | |
| jksoft | 0:dde3f92088d5 | 99 | // HcInterruptStatus Register |
| jksoft | 0:dde3f92088d5 | 100 | #define WritebackDoneHead 0x00000002 |
| jksoft | 0:dde3f92088d5 | 101 | #define StartofFrame 0x00000004 |
| jksoft | 0:dde3f92088d5 | 102 | #define ResumeDetected 0x00000008 |
| jksoft | 0:dde3f92088d5 | 103 | #define UnrecoverableError 0x00000010 |
| jksoft | 0:dde3f92088d5 | 104 | #define FrameNumberOverflow 0x00000020 |
| jksoft | 0:dde3f92088d5 | 105 | #define RootHubStatusChange 0x00000040 |
| jksoft | 0:dde3f92088d5 | 106 | #define OwnershipChange 0x00000080 |
| jksoft | 0:dde3f92088d5 | 107 | #define MasterInterruptEnable 0x80000000 |
| jksoft | 0:dde3f92088d5 | 108 | |
| jksoft | 0:dde3f92088d5 | 109 | // HcRhStatus |
| jksoft | 0:dde3f92088d5 | 110 | #define SetGlobalPower 0x00010000 |
| jksoft | 0:dde3f92088d5 | 111 | #define DeviceRemoteWakeupEnable 0x00008000 |
| jksoft | 0:dde3f92088d5 | 112 | |
| jksoft | 0:dde3f92088d5 | 113 | // HcRhPortStatus (hub 0, port 1) |
| jksoft | 0:dde3f92088d5 | 114 | #define CurrentConnectStatus 0x00000001 |
| jksoft | 0:dde3f92088d5 | 115 | #define PortEnableStatus 0x00000002 |
| jksoft | 0:dde3f92088d5 | 116 | #define PortSuspendStatus 0x00000004 |
| jksoft | 0:dde3f92088d5 | 117 | #define PortOverCurrentIndicator 0x00000008 |
| jksoft | 0:dde3f92088d5 | 118 | #define PortResetStatus 0x00000010 |
| jksoft | 0:dde3f92088d5 | 119 | |
| jksoft | 0:dde3f92088d5 | 120 | #define PortPowerStatus 0x00000100 |
| jksoft | 0:dde3f92088d5 | 121 | #define LowspeedDevice 0x00000200 |
| jksoft | 0:dde3f92088d5 | 122 | #define HighspeedDevice 0x00000400 |
| jksoft | 0:dde3f92088d5 | 123 | |
| jksoft | 0:dde3f92088d5 | 124 | #define ConnectStatusChange (CurrentConnectStatus << 16) |
| jksoft | 0:dde3f92088d5 | 125 | #define PortResetStatusChange (PortResetStatus << 16) |
| jksoft | 0:dde3f92088d5 | 126 | |
| jksoft | 0:dde3f92088d5 | 127 | |
| jksoft | 0:dde3f92088d5 | 128 | #define TD_ROUNDING (u32)0x00040000 |
| jksoft | 0:dde3f92088d5 | 129 | #define TD_SETUP (u32)0x00000000 |
| jksoft | 0:dde3f92088d5 | 130 | #define TD_IN (u32)0x00100000 |
| jksoft | 0:dde3f92088d5 | 131 | #define TD_OUT (u32)0x00080000 |
| jksoft | 0:dde3f92088d5 | 132 | #define TD_DELAY_INT(x) (u32)((x) << 21) |
| jksoft | 0:dde3f92088d5 | 133 | #define TD_TOGGLE_0 (u32)0x02000000 |
| jksoft | 0:dde3f92088d5 | 134 | #define TD_TOGGLE_1 (u32)0x03000000 |
| jksoft | 0:dde3f92088d5 | 135 | #define TD_CC (u32)0xF0000000 |
| jksoft | 0:dde3f92088d5 | 136 | |
| jksoft | 0:dde3f92088d5 | 137 | // HostController EndPoint Descriptor |
| jksoft | 0:dde3f92088d5 | 138 | typedef struct { |
| jksoft | 0:dde3f92088d5 | 139 | volatile u32 Control; |
| jksoft | 0:dde3f92088d5 | 140 | volatile u32 TailTd; |
| jksoft | 0:dde3f92088d5 | 141 | volatile u32 HeadTd; |
| jksoft | 0:dde3f92088d5 | 142 | volatile u32 Next; |
| jksoft | 0:dde3f92088d5 | 143 | } HCED; |
| jksoft | 0:dde3f92088d5 | 144 | |
| jksoft | 0:dde3f92088d5 | 145 | // HostController Transfer Descriptor |
| jksoft | 0:dde3f92088d5 | 146 | typedef struct { |
| jksoft | 0:dde3f92088d5 | 147 | volatile u32 Control; |
| jksoft | 0:dde3f92088d5 | 148 | volatile u32 CurrBufPtr; |
| jksoft | 0:dde3f92088d5 | 149 | volatile u32 Next; |
| jksoft | 0:dde3f92088d5 | 150 | volatile u32 BufEnd; |
| jksoft | 0:dde3f92088d5 | 151 | } HCTD; |
| jksoft | 0:dde3f92088d5 | 152 | |
| jksoft | 0:dde3f92088d5 | 153 | // Host Controller Communication Area |
| jksoft | 0:dde3f92088d5 | 154 | typedef struct { |
| jksoft | 0:dde3f92088d5 | 155 | volatile u32 InterruptTable[32]; |
| jksoft | 0:dde3f92088d5 | 156 | volatile u16 FrameNumber; |
| jksoft | 0:dde3f92088d5 | 157 | volatile u16 FrameNumberPad; |
| jksoft | 0:dde3f92088d5 | 158 | volatile u32 DoneHead; |
| jksoft | 0:dde3f92088d5 | 159 | volatile u8 Reserved[120]; |
| jksoft | 0:dde3f92088d5 | 160 | } HCCA; |
| jksoft | 0:dde3f92088d5 | 161 | |
| jksoft | 0:dde3f92088d5 | 162 | //==================================================================================== |
| jksoft | 0:dde3f92088d5 | 163 | //==================================================================================== |
| jksoft | 0:dde3f92088d5 | 164 | |
| jksoft | 0:dde3f92088d5 | 165 | class HostController; |
| jksoft | 0:dde3f92088d5 | 166 | class Endpoint; |
| jksoft | 0:dde3f92088d5 | 167 | class Device; |
| jksoft | 0:dde3f92088d5 | 168 | |
| jksoft | 0:dde3f92088d5 | 169 | // must be 3*16 bytes long |
| jksoft | 0:dde3f92088d5 | 170 | class Endpoint |
| jksoft | 0:dde3f92088d5 | 171 | { |
| jksoft | 0:dde3f92088d5 | 172 | public: |
| jksoft | 0:dde3f92088d5 | 173 | HCED EndpointDescriptor; // Pointer to EndpointDescriptor == Pointer to Endpoint |
| jksoft | 0:dde3f92088d5 | 174 | HCTD TDHead; |
| jksoft | 0:dde3f92088d5 | 175 | |
| jksoft | 0:dde3f92088d5 | 176 | enum State |
| jksoft | 0:dde3f92088d5 | 177 | { |
| jksoft | 0:dde3f92088d5 | 178 | Free, |
| jksoft | 0:dde3f92088d5 | 179 | NotQueued, |
| jksoft | 0:dde3f92088d5 | 180 | Idle, |
| jksoft | 0:dde3f92088d5 | 181 | SetupQueued, |
| jksoft | 0:dde3f92088d5 | 182 | DataQueued, |
| jksoft | 0:dde3f92088d5 | 183 | StatusQueued, |
| jksoft | 0:dde3f92088d5 | 184 | CallbackPending |
| jksoft | 0:dde3f92088d5 | 185 | }; |
| jksoft | 0:dde3f92088d5 | 186 | |
| jksoft | 0:dde3f92088d5 | 187 | volatile u8 CurrentState; |
| jksoft | 0:dde3f92088d5 | 188 | u8 Flags; // 0x80 In, 0x03 mask endpoint type |
| jksoft | 0:dde3f92088d5 | 189 | |
| jksoft | 0:dde3f92088d5 | 190 | u16 Length; |
| jksoft | 0:dde3f92088d5 | 191 | u8* Data; |
| jksoft | 0:dde3f92088d5 | 192 | USBCallback Callback; // Must be a multiple of 16 bytes long |
| jksoft | 0:dde3f92088d5 | 193 | void* UserData; |
| jksoft | 0:dde3f92088d5 | 194 | |
| jksoft | 0:dde3f92088d5 | 195 | int Address() |
| jksoft | 0:dde3f92088d5 | 196 | { |
| jksoft | 0:dde3f92088d5 | 197 | int ep = (EndpointDescriptor.Control >> 7) & 0xF; |
| jksoft | 0:dde3f92088d5 | 198 | if (ep) |
| jksoft | 0:dde3f92088d5 | 199 | ep |= Flags & 0x80; |
| jksoft | 0:dde3f92088d5 | 200 | return ep; |
| jksoft | 0:dde3f92088d5 | 201 | } |
| jksoft | 0:dde3f92088d5 | 202 | |
| jksoft | 0:dde3f92088d5 | 203 | int Device() |
| jksoft | 0:dde3f92088d5 | 204 | { |
| jksoft | 0:dde3f92088d5 | 205 | return EndpointDescriptor.Control & 0x7F; |
| jksoft | 0:dde3f92088d5 | 206 | } |
| jksoft | 0:dde3f92088d5 | 207 | |
| jksoft | 0:dde3f92088d5 | 208 | int Status() |
| jksoft | 0:dde3f92088d5 | 209 | { |
| jksoft | 0:dde3f92088d5 | 210 | return (TDHead.Control >> 28) & 0xF; |
| jksoft | 0:dde3f92088d5 | 211 | } |
| jksoft | 0:dde3f92088d5 | 212 | |
| jksoft | 0:dde3f92088d5 | 213 | u32 Enqueue(u32 head) |
| jksoft | 0:dde3f92088d5 | 214 | { |
| jksoft | 0:dde3f92088d5 | 215 | if (CurrentState == NotQueued) |
| jksoft | 0:dde3f92088d5 | 216 | { |
| jksoft | 0:dde3f92088d5 | 217 | EndpointDescriptor.Next = head; |
| jksoft | 0:dde3f92088d5 | 218 | head = (u32)&EndpointDescriptor; |
| jksoft | 0:dde3f92088d5 | 219 | CurrentState = Idle; |
| jksoft | 0:dde3f92088d5 | 220 | } |
| jksoft | 0:dde3f92088d5 | 221 | return head; |
| jksoft | 0:dde3f92088d5 | 222 | } |
| jksoft | 0:dde3f92088d5 | 223 | }; |
| jksoft | 0:dde3f92088d5 | 224 | |
| jksoft | 0:dde3f92088d5 | 225 | class Device |
| jksoft | 0:dde3f92088d5 | 226 | { |
| jksoft | 0:dde3f92088d5 | 227 | public: |
| jksoft | 0:dde3f92088d5 | 228 | u8 _endpointMap[MAX_ENDPOINTS_PER_DEVICE*2]; |
| jksoft | 0:dde3f92088d5 | 229 | u8 Hub; |
| jksoft | 0:dde3f92088d5 | 230 | u8 Port; |
| jksoft | 0:dde3f92088d5 | 231 | u8 Addr; |
| jksoft | 0:dde3f92088d5 | 232 | u8 Pad; |
| jksoft | 0:dde3f92088d5 | 233 | |
| jksoft | 0:dde3f92088d5 | 234 | // Only if this device is a hub |
| jksoft | 0:dde3f92088d5 | 235 | u8 HubPortCount; // nonzero if this is a hub |
| jksoft | 0:dde3f92088d5 | 236 | u8 HubInterruptData; |
| jksoft | 0:dde3f92088d5 | 237 | u8 HubMap; |
| jksoft | 0:dde3f92088d5 | 238 | u8 HubMask; |
| jksoft | 0:dde3f92088d5 | 239 | |
| jksoft | 0:dde3f92088d5 | 240 | int Flags; // 1 = Disconnected |
| jksoft | 0:dde3f92088d5 | 241 | |
| jksoft | 0:dde3f92088d5 | 242 | Setup SetupBuffer; |
| jksoft | 0:dde3f92088d5 | 243 | |
| jksoft | 0:dde3f92088d5 | 244 | // Allocate endpoint zero |
| jksoft | 0:dde3f92088d5 | 245 | int Init(DeviceDescriptor* d, int hub, int port, int addr, int lowSpeed) |
| jksoft | 0:dde3f92088d5 | 246 | { |
| jksoft | 0:dde3f92088d5 | 247 | Hub = hub; |
| jksoft | 0:dde3f92088d5 | 248 | Port = port; |
| jksoft | 0:dde3f92088d5 | 249 | Addr = addr; |
| jksoft | 0:dde3f92088d5 | 250 | Flags = lowSpeed; |
| jksoft | 0:dde3f92088d5 | 251 | memset(_endpointMap,0xFF,sizeof(_endpointMap)); |
| jksoft | 0:dde3f92088d5 | 252 | return 0; |
| jksoft | 0:dde3f92088d5 | 253 | } |
| jksoft | 0:dde3f92088d5 | 254 | |
| jksoft | 0:dde3f92088d5 | 255 | int SetEndpointIndex(int ep, int endpointIndex) |
| jksoft | 0:dde3f92088d5 | 256 | { |
| jksoft | 0:dde3f92088d5 | 257 | for (int i = 0; i < MAX_ENDPOINTS_PER_DEVICE*2; i += 2) |
| jksoft | 0:dde3f92088d5 | 258 | { |
| jksoft | 0:dde3f92088d5 | 259 | if (_endpointMap[i] == 0xFF) // Add endpoint to map |
| jksoft | 0:dde3f92088d5 | 260 | { |
| jksoft | 0:dde3f92088d5 | 261 | _endpointMap[i] = ep; |
| jksoft | 0:dde3f92088d5 | 262 | _endpointMap[i+1] = endpointIndex; |
| jksoft | 0:dde3f92088d5 | 263 | return 0; |
| jksoft | 0:dde3f92088d5 | 264 | } |
| jksoft | 0:dde3f92088d5 | 265 | } |
| jksoft | 0:dde3f92088d5 | 266 | return ERR_ENDPOINT_NONE_LEFT; |
| jksoft | 0:dde3f92088d5 | 267 | } |
| jksoft | 0:dde3f92088d5 | 268 | |
| jksoft | 0:dde3f92088d5 | 269 | int GetEndpointIndex(int ep) |
| jksoft | 0:dde3f92088d5 | 270 | { |
| jksoft | 0:dde3f92088d5 | 271 | for (int i = 0; i < MAX_ENDPOINTS_PER_DEVICE*2; i += 2) |
| jksoft | 0:dde3f92088d5 | 272 | { |
| jksoft | 0:dde3f92088d5 | 273 | if (_endpointMap[i] == ep) |
| jksoft | 0:dde3f92088d5 | 274 | return _endpointMap[i+1]; |
| jksoft | 0:dde3f92088d5 | 275 | if (_endpointMap[i] == 0xFF) |
| jksoft | 0:dde3f92088d5 | 276 | break; |
| jksoft | 0:dde3f92088d5 | 277 | } |
| jksoft | 0:dde3f92088d5 | 278 | return -1; |
| jksoft | 0:dde3f92088d5 | 279 | } |
| jksoft | 0:dde3f92088d5 | 280 | }; |
| jksoft | 0:dde3f92088d5 | 281 | |
| jksoft | 0:dde3f92088d5 | 282 | class HostController |
| jksoft | 0:dde3f92088d5 | 283 | { |
| jksoft | 0:dde3f92088d5 | 284 | public: |
| jksoft | 0:dde3f92088d5 | 285 | HCCA CommunicationArea; |
| jksoft | 0:dde3f92088d5 | 286 | Endpoint Endpoints[MAX_ENDPOINTS_TOTAL]; // Multiple of 16 |
| jksoft | 0:dde3f92088d5 | 287 | |
| jksoft | 0:dde3f92088d5 | 288 | Endpoint EndpointZero; // For device enumeration |
| jksoft | 0:dde3f92088d5 | 289 | HCTD _commonTail; |
| jksoft | 0:dde3f92088d5 | 290 | Setup _setupZero; |
| jksoft | 0:dde3f92088d5 | 291 | |
| jksoft | 0:dde3f92088d5 | 292 | Device Devices[MAX_DEVICES]; |
| jksoft | 0:dde3f92088d5 | 293 | u32 _frameNumber; // 32 bit ms counter |
| jksoft | 0:dde3f92088d5 | 294 | |
| jksoft | 0:dde3f92088d5 | 295 | u8 _callbacksPending; // Endpoints with callbacks are pending, set from ISR via ProcessDoneQueue |
| jksoft | 0:dde3f92088d5 | 296 | u8 _rootHubStatusChange; // Root hub status has changed, set from ISR |
| jksoft | 0:dde3f92088d5 | 297 | u8 _unused0; |
| jksoft | 0:dde3f92088d5 | 298 | u8 _unused1; |
| jksoft | 0:dde3f92088d5 | 299 | |
| jksoft | 0:dde3f92088d5 | 300 | u8 _connectPending; // Reset has initiated a connect |
| jksoft | 0:dde3f92088d5 | 301 | u8 _connectCountdown; // Number of ms left after reset before we can connect |
| jksoft | 0:dde3f92088d5 | 302 | u8 _connectHub; // Will connect on this hub |
| jksoft | 0:dde3f92088d5 | 303 | u8 _connectPort; // ... and this port |
| jksoft | 0:dde3f92088d5 | 304 | |
| jksoft | 0:dde3f92088d5 | 305 | u8 SRAM[0]; // Start of free SRAM |
| jksoft | 0:dde3f92088d5 | 306 | |
| jksoft | 0:dde3f92088d5 | 307 | void Loop() |
| jksoft | 0:dde3f92088d5 | 308 | { |
| jksoft | 0:dde3f92088d5 | 309 | // printf("Enter Loop \r\r\n"); |
| jksoft | 0:dde3f92088d5 | 310 | u16 elapsed = CommunicationArea.FrameNumber - (u16)_frameNumber; // extend to 32 bits |
| jksoft | 0:dde3f92088d5 | 311 | _frameNumber += elapsed; |
| jksoft | 0:dde3f92088d5 | 312 | |
| jksoft | 0:dde3f92088d5 | 313 | // Do callbacks, if any |
| jksoft | 0:dde3f92088d5 | 314 | while (_callbacksPending) |
| jksoft | 0:dde3f92088d5 | 315 | { |
| jksoft | 0:dde3f92088d5 | 316 | for (int i = 0; i < MAX_ENDPOINTS_TOTAL; i++) |
| jksoft | 0:dde3f92088d5 | 317 | { |
| jksoft | 0:dde3f92088d5 | 318 | Endpoint* endpoint = Endpoints + i; |
| jksoft | 0:dde3f92088d5 | 319 | if (endpoint->CurrentState == Endpoint::CallbackPending) |
| jksoft | 0:dde3f92088d5 | 320 | { |
| jksoft | 0:dde3f92088d5 | 321 | _callbacksPending--; |
| jksoft | 0:dde3f92088d5 | 322 | endpoint->CurrentState = Endpoint::Idle; |
| jksoft | 0:dde3f92088d5 | 323 | LOG("CurrentState Change Idle endpoint(%d) currentState =%d\r\r\n",endpoint->Address(),endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 324 | endpoint->Callback(endpoint->Device(),endpoint->Address(),endpoint->Status(),endpoint->Data,endpoint->Length,endpoint->UserData); |
| jksoft | 0:dde3f92088d5 | 325 | } |
| jksoft | 0:dde3f92088d5 | 326 | } |
| jksoft | 0:dde3f92088d5 | 327 | } |
| jksoft | 0:dde3f92088d5 | 328 | |
| jksoft | 0:dde3f92088d5 | 329 | // Deal with changes on the root hub |
| jksoft | 0:dde3f92088d5 | 330 | if (_rootHubStatusChange) |
| jksoft | 0:dde3f92088d5 | 331 | { |
| jksoft | 0:dde3f92088d5 | 332 | u32 status = LPC_USB->HcRhPortStatus1; |
| jksoft | 0:dde3f92088d5 | 333 | _rootHubStatusChange = 0; |
| jksoft | 0:dde3f92088d5 | 334 | if (status >> 16) |
| jksoft | 0:dde3f92088d5 | 335 | { |
| jksoft | 0:dde3f92088d5 | 336 | HubStatusChange(0,1,status); |
| jksoft | 0:dde3f92088d5 | 337 | LPC_USB->HcRhPortStatus1 = status & 0xFFFF0000; // clear status changes |
| jksoft | 0:dde3f92088d5 | 338 | } |
| jksoft | 0:dde3f92088d5 | 339 | } |
| jksoft | 0:dde3f92088d5 | 340 | |
| jksoft | 0:dde3f92088d5 | 341 | // Connect after reset timeout |
| jksoft | 0:dde3f92088d5 | 342 | if (_connectCountdown) |
| jksoft | 0:dde3f92088d5 | 343 | { |
| jksoft | 0:dde3f92088d5 | 344 | if (elapsed >= _connectCountdown) |
| jksoft | 0:dde3f92088d5 | 345 | { |
| jksoft | 0:dde3f92088d5 | 346 | _connectCountdown = 0; |
| jksoft | 0:dde3f92088d5 | 347 | Connect(_connectHub,_connectPort & 0x7F,_connectPort & 0x80); |
| jksoft | 0:dde3f92088d5 | 348 | } else |
| jksoft | 0:dde3f92088d5 | 349 | _connectCountdown -= elapsed; |
| jksoft | 0:dde3f92088d5 | 350 | } |
| jksoft | 0:dde3f92088d5 | 351 | |
| jksoft | 0:dde3f92088d5 | 352 | // printf("Outer Loop \r\r\n"); |
| jksoft | 0:dde3f92088d5 | 353 | } |
| jksoft | 0:dde3f92088d5 | 354 | |
| jksoft | 0:dde3f92088d5 | 355 | // HubInterrupt - bitmap in dev->HubInterruptData |
| jksoft | 0:dde3f92088d5 | 356 | void HubInterrupt(int device) |
| jksoft | 0:dde3f92088d5 | 357 | { |
| jksoft | 0:dde3f92088d5 | 358 | Device* dev = &Devices[device-1]; |
| jksoft | 0:dde3f92088d5 | 359 | for (int i = 0; i < dev->HubPortCount; i++) |
| jksoft | 0:dde3f92088d5 | 360 | { |
| jksoft | 0:dde3f92088d5 | 361 | int port = i+1; |
| jksoft | 0:dde3f92088d5 | 362 | if (dev->HubInterruptData & (1 << port)) |
| jksoft | 0:dde3f92088d5 | 363 | { |
| jksoft | 0:dde3f92088d5 | 364 | u32 status = 0; |
| jksoft | 0:dde3f92088d5 | 365 | GetPortStatus(device,port,&status); |
| jksoft | 0:dde3f92088d5 | 366 | if (status >> 16) |
| jksoft | 0:dde3f92088d5 | 367 | { |
| jksoft | 0:dde3f92088d5 | 368 | if (_connectPending && (status & ConnectStatusChange)) |
| jksoft | 0:dde3f92088d5 | 369 | continue; // Don't connect again until previous device has been added and addressed |
| jksoft | 0:dde3f92088d5 | 370 | |
| jksoft | 0:dde3f92088d5 | 371 | HubStatusChange(device,port,status); |
| jksoft | 0:dde3f92088d5 | 372 | if (status & ConnectStatusChange) |
| jksoft | 0:dde3f92088d5 | 373 | ClearPortFeature(device,C_PORT_CONNECTION,port); |
| jksoft | 0:dde3f92088d5 | 374 | if (status & PortResetStatusChange) |
| jksoft | 0:dde3f92088d5 | 375 | ClearPortFeature(device,C_PORT_RESET,port); |
| jksoft | 0:dde3f92088d5 | 376 | } |
| jksoft | 0:dde3f92088d5 | 377 | } |
| jksoft | 0:dde3f92088d5 | 378 | } |
| jksoft | 0:dde3f92088d5 | 379 | } |
| jksoft | 0:dde3f92088d5 | 380 | |
| jksoft | 0:dde3f92088d5 | 381 | static void HubInterruptCallback(int device, int endpoint, int status, u8* data, int len, void* userData) |
| jksoft | 0:dde3f92088d5 | 382 | { |
| jksoft | 0:dde3f92088d5 | 383 | HostController* controller = (HostController*)userData; |
| jksoft | 0:dde3f92088d5 | 384 | if (status == 0) |
| jksoft | 0:dde3f92088d5 | 385 | controller->HubInterrupt(device); |
| jksoft | 0:dde3f92088d5 | 386 | USBInterruptTransfer(device,endpoint,data,1,HubInterruptCallback,userData); |
| jksoft | 0:dde3f92088d5 | 387 | } |
| jksoft | 0:dde3f92088d5 | 388 | |
| jksoft | 0:dde3f92088d5 | 389 | int InitHub(int device) |
| jksoft | 0:dde3f92088d5 | 390 | { |
| jksoft | 0:dde3f92088d5 | 391 | u8 buf[16]; |
| jksoft | 0:dde3f92088d5 | 392 | int r= USBControlTransfer(device,DEVICE_TO_HOST | REQUEST_TYPE_CLASS | RECIPIENT_DEVICE,GET_DESCRIPTOR,(DESCRIPTOR_TYPE_HUB << 8),0,buf,sizeof(buf)); |
| jksoft | 0:dde3f92088d5 | 393 | if (r < 0) |
| jksoft | 0:dde3f92088d5 | 394 | return ERR_HUB_INIT_FAILED; |
| jksoft | 0:dde3f92088d5 | 395 | |
| jksoft | 0:dde3f92088d5 | 396 | // turn on power on the hubs ports |
| jksoft | 0:dde3f92088d5 | 397 | Device* dev = &Devices[device-1]; |
| jksoft | 0:dde3f92088d5 | 398 | int ports = buf[2]; |
| jksoft | 0:dde3f92088d5 | 399 | dev->HubPortCount = ports; |
| jksoft | 0:dde3f92088d5 | 400 | for (int i = 0; i < ports; i++) |
| jksoft | 0:dde3f92088d5 | 401 | SetPortPower(device,i+1); |
| jksoft | 0:dde3f92088d5 | 402 | |
| jksoft | 0:dde3f92088d5 | 403 | // Enable hub change interrupts |
| jksoft | 0:dde3f92088d5 | 404 | return USBInterruptTransfer(device,0x81,&dev->HubInterruptData,1,HubInterruptCallback,this); |
| jksoft | 0:dde3f92088d5 | 405 | } |
| jksoft | 0:dde3f92088d5 | 406 | |
| jksoft | 0:dde3f92088d5 | 407 | int AddEndpoint(int device, int ep, int attributes, int maxPacketSize, int interval) |
| jksoft | 0:dde3f92088d5 | 408 | { |
| jksoft | 0:dde3f92088d5 | 409 | LOG("AddEndpoint D:%02X A:%02X T:%02X P:%04X I:%02X\r\r\n",device,ep,attributes,maxPacketSize,interval); |
| jksoft | 0:dde3f92088d5 | 410 | Device* dev = &Devices[device-1]; |
| jksoft | 0:dde3f92088d5 | 411 | Endpoint* endpoint = AllocateEndpoint(device,ep,attributes,maxPacketSize); |
| jksoft | 0:dde3f92088d5 | 412 | if (!endpoint) |
| jksoft | 0:dde3f92088d5 | 413 | return ERR_ENDPOINT_NONE_LEFT; |
| jksoft | 0:dde3f92088d5 | 414 | dev->SetEndpointIndex(ep,endpoint - Endpoints); |
| jksoft | 0:dde3f92088d5 | 415 | endpoint->EndpointDescriptor.Control |= dev->Flags; // Map in slow speed |
| jksoft | 0:dde3f92088d5 | 416 | return 0; // TODO ed->bInterval |
| jksoft | 0:dde3f92088d5 | 417 | } |
| jksoft | 0:dde3f92088d5 | 418 | |
| jksoft | 0:dde3f92088d5 | 419 | int AddEndpoint(int device, EndpointDescriptor* ed) |
| jksoft | 0:dde3f92088d5 | 420 | { |
| jksoft | 0:dde3f92088d5 | 421 | return AddEndpoint(device,ed->bEndpointAddress,ed->bmAttributes,ed->wMaxPacketSize,ed->bInterval); |
| jksoft | 0:dde3f92088d5 | 422 | } |
| jksoft | 0:dde3f92088d5 | 423 | |
| jksoft | 0:dde3f92088d5 | 424 | // allocate a endpoint |
| jksoft | 0:dde3f92088d5 | 425 | Endpoint* AllocateEndpoint(int device, int endpointAddress, int type, int maxPacketSize) |
| jksoft | 0:dde3f92088d5 | 426 | { |
| jksoft | 0:dde3f92088d5 | 427 | for (int i = 0; i < MAX_ENDPOINTS_TOTAL; i++) |
| jksoft | 0:dde3f92088d5 | 428 | { |
| jksoft | 0:dde3f92088d5 | 429 | Endpoint* ep = &Endpoints[i]; |
| jksoft | 0:dde3f92088d5 | 430 | if (ep->CurrentState == 0) |
| jksoft | 0:dde3f92088d5 | 431 | { |
| jksoft | 0:dde3f92088d5 | 432 | //LOG("Allocated endpoint %d to %02X:%02X\r\r\n",i,device,endpointAddress); |
| jksoft | 0:dde3f92088d5 | 433 | ep->Flags = (endpointAddress & 0x80) | (type & 3); |
| jksoft | 0:dde3f92088d5 | 434 | ep->CurrentState = Endpoint::NotQueued; |
| jksoft | 0:dde3f92088d5 | 435 | ep->EndpointDescriptor.Control = (maxPacketSize << 16) | ((endpointAddress & 0x7F) << 7) | device; |
| jksoft | 0:dde3f92088d5 | 436 | return ep; |
| jksoft | 0:dde3f92088d5 | 437 | } |
| jksoft | 0:dde3f92088d5 | 438 | } |
| jksoft | 0:dde3f92088d5 | 439 | return 0; |
| jksoft | 0:dde3f92088d5 | 440 | } |
| jksoft | 0:dde3f92088d5 | 441 | |
| jksoft | 0:dde3f92088d5 | 442 | Endpoint* GetEndpoint(int device, int ep) |
| jksoft | 0:dde3f92088d5 | 443 | { |
| jksoft | 0:dde3f92088d5 | 444 | if (device == 0) |
| jksoft | 0:dde3f92088d5 | 445 | { |
| jksoft | 0:dde3f92088d5 | 446 | //printf("WARNING: USING DEVICE 0\r\n"); |
| jksoft | 0:dde3f92088d5 | 447 | return &EndpointZero; |
| jksoft | 0:dde3f92088d5 | 448 | } |
| jksoft | 0:dde3f92088d5 | 449 | if (device > MAX_DEVICES) |
| jksoft | 0:dde3f92088d5 | 450 | return 0; |
| jksoft | 0:dde3f92088d5 | 451 | int i = Devices[device-1].GetEndpointIndex(ep); |
| jksoft | 0:dde3f92088d5 | 452 | if (i == -1) |
| jksoft | 0:dde3f92088d5 | 453 | return 0; |
| jksoft | 0:dde3f92088d5 | 454 | return Endpoints + i; |
| jksoft | 0:dde3f92088d5 | 455 | } |
| jksoft | 0:dde3f92088d5 | 456 | |
| jksoft | 0:dde3f92088d5 | 457 | int Transfer(Endpoint* endpoint, int token, u8* data, int len, int state) |
| jksoft | 0:dde3f92088d5 | 458 | { |
| jksoft | 0:dde3f92088d5 | 459 | //Makoto edit comment out |
| jksoft | 0:dde3f92088d5 | 460 | // LOG("Transfer start\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 461 | LOG("Transfer ep=%02X Token:%d Len:%d State:%d\r\r\n",endpoint->Address(),token,len,state); |
| jksoft | 0:dde3f92088d5 | 462 | |
| jksoft | 0:dde3f92088d5 | 463 | int toggle = 0; |
| jksoft | 0:dde3f92088d5 | 464 | if (endpoint->Address() == 0) |
| jksoft | 0:dde3f92088d5 | 465 | toggle = (token == TOKEN_SETUP) ? TD_TOGGLE_0 : TD_TOGGLE_1; |
| jksoft | 0:dde3f92088d5 | 466 | |
| jksoft | 0:dde3f92088d5 | 467 | if (token != TOKEN_SETUP) |
| jksoft | 0:dde3f92088d5 | 468 | token = (token == TOKEN_IN ? TD_IN : TD_OUT); |
| jksoft | 0:dde3f92088d5 | 469 | |
| jksoft | 0:dde3f92088d5 | 470 | HCTD* head = &endpoint->TDHead; |
| jksoft | 0:dde3f92088d5 | 471 | HCTD* tail = &_commonTail; |
| jksoft | 0:dde3f92088d5 | 472 | |
| jksoft | 0:dde3f92088d5 | 473 | head->Control = TD_ROUNDING | token | TD_DELAY_INT(0) | toggle | TD_CC; |
| jksoft | 0:dde3f92088d5 | 474 | head->CurrBufPtr = (u32)data; |
| jksoft | 0:dde3f92088d5 | 475 | head->BufEnd = (u32)(data + len - 1); |
| jksoft | 0:dde3f92088d5 | 476 | head->Next = (u32)tail; |
| jksoft | 0:dde3f92088d5 | 477 | |
| jksoft | 0:dde3f92088d5 | 478 | HCED* ed = &endpoint->EndpointDescriptor; |
| jksoft | 0:dde3f92088d5 | 479 | ed->HeadTd = (u32)head | (ed->HeadTd & 0x00000002); // carry toggle |
| jksoft | 0:dde3f92088d5 | 480 | ed->TailTd = (u32)tail; |
| jksoft | 0:dde3f92088d5 | 481 | |
| jksoft | 0:dde3f92088d5 | 482 | //HCTD* td = head; |
| jksoft | 0:dde3f92088d5 | 483 | //LOG("%04X TD %08X %08X %08X Next:%08X\r\r\n",CommunicationArea.FrameNumber,td->Control,td->CurrBufPtr,td->BufEnd,td->Next); |
| jksoft | 0:dde3f92088d5 | 484 | //LOG("%04X ED %08X %08X %08X\r\r\n",CommunicationArea.FrameNumber,ed->Control,ed->HeadTd,ed->TailTd); |
| jksoft | 0:dde3f92088d5 | 485 | |
| jksoft | 0:dde3f92088d5 | 486 | //LOG("Transfer run01\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 487 | switch (endpoint->Flags & 3) |
| jksoft | 0:dde3f92088d5 | 488 | { |
| jksoft | 0:dde3f92088d5 | 489 | case ENDPOINT_CONTROL: |
| jksoft | 0:dde3f92088d5 | 490 | LOG("Transfer run ENDPOINT_CONTROL\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 491 | LPC_USB->HcControlHeadED = endpoint->Enqueue(LPC_USB->HcControlHeadED); // May change state NotQueued->Idle |
| jksoft | 0:dde3f92088d5 | 492 | //LOG("Transfer run02\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 493 | LOG("endpoint->CurrentState change %d->%d\r\r\n",endpoint->CurrentState,state); |
| jksoft | 0:dde3f92088d5 | 494 | endpoint->CurrentState = state; // Get in before an int |
| jksoft | 0:dde3f92088d5 | 495 | LPC_USB->HcCommandStatus = LPC_USB->HcCommandStatus | ControlListFilled; |
| jksoft | 0:dde3f92088d5 | 496 | LPC_USB->HcControl = LPC_USB->HcControl | ControlListEnable; |
| jksoft | 0:dde3f92088d5 | 497 | |
| jksoft | 0:dde3f92088d5 | 498 | break; |
| jksoft | 0:dde3f92088d5 | 499 | |
| jksoft | 0:dde3f92088d5 | 500 | case ENDPOINT_BULK: |
| jksoft | 0:dde3f92088d5 | 501 | LOG("Transfer run ENDPOINT_BULK\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 502 | LPC_USB->HcBulkHeadED = endpoint->Enqueue(LPC_USB->HcBulkHeadED); |
| jksoft | 0:dde3f92088d5 | 503 | LOG("endpoint->CurrentState change %d->%d\r\r\n",endpoint->CurrentState,state); |
| jksoft | 0:dde3f92088d5 | 504 | endpoint->CurrentState = state; |
| jksoft | 0:dde3f92088d5 | 505 | LPC_USB->HcCommandStatus = LPC_USB->HcCommandStatus | BulkListFilled; |
| jksoft | 0:dde3f92088d5 | 506 | LPC_USB->HcControl = LPC_USB->HcControl | BulkListEnable; |
| jksoft | 0:dde3f92088d5 | 507 | break; |
| jksoft | 0:dde3f92088d5 | 508 | |
| jksoft | 0:dde3f92088d5 | 509 | case ENDPOINT_INTERRUPT: |
| jksoft | 0:dde3f92088d5 | 510 | LOG("Transfer run ENDPOINT_INTERRUPT\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 511 | CommunicationArea.InterruptTable[0] = endpoint->Enqueue(CommunicationArea.InterruptTable[0]); |
| jksoft | 0:dde3f92088d5 | 512 | LOG("endpoint->CurrentState change %d->%d\r\r\n",endpoint->CurrentState,state); |
| jksoft | 0:dde3f92088d5 | 513 | endpoint->CurrentState = state; |
| jksoft | 0:dde3f92088d5 | 514 | LPC_USB->HcControl |= PeriodicListEnable; |
| jksoft | 0:dde3f92088d5 | 515 | break; |
| jksoft | 0:dde3f92088d5 | 516 | } |
| jksoft | 0:dde3f92088d5 | 517 | |
| jksoft | 0:dde3f92088d5 | 518 | LOG("Transfer end\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 519 | return 0; |
| jksoft | 0:dde3f92088d5 | 520 | } |
| jksoft | 0:dde3f92088d5 | 521 | |
| jksoft | 0:dde3f92088d5 | 522 | // Remove an endpoint from an active queue |
| jksoft | 0:dde3f92088d5 | 523 | bool Remove(HCED* ed, volatile HCED** queue) |
| jksoft | 0:dde3f92088d5 | 524 | { |
| jksoft | 0:dde3f92088d5 | 525 | if (*queue == 0) |
| jksoft | 0:dde3f92088d5 | 526 | return false; |
| jksoft | 0:dde3f92088d5 | 527 | if (*queue == (volatile HCED*)ed) |
| jksoft | 0:dde3f92088d5 | 528 | { |
| jksoft | 0:dde3f92088d5 | 529 | *queue = (volatile HCED*)ed->Next; // At head of queue |
| jksoft | 0:dde3f92088d5 | 530 | return true; |
| jksoft | 0:dde3f92088d5 | 531 | } |
| jksoft | 0:dde3f92088d5 | 532 | |
| jksoft | 0:dde3f92088d5 | 533 | volatile HCED* head = *queue; |
| jksoft | 0:dde3f92088d5 | 534 | while (head) |
| jksoft | 0:dde3f92088d5 | 535 | { |
| jksoft | 0:dde3f92088d5 | 536 | if (head->Next == (u32)ed) |
| jksoft | 0:dde3f92088d5 | 537 | { |
| jksoft | 0:dde3f92088d5 | 538 | head->Next = ed->Next; |
| jksoft | 0:dde3f92088d5 | 539 | return true; |
| jksoft | 0:dde3f92088d5 | 540 | } |
| jksoft | 0:dde3f92088d5 | 541 | head = (volatile HCED*)head->Next; |
| jksoft | 0:dde3f92088d5 | 542 | } |
| jksoft | 0:dde3f92088d5 | 543 | return false; |
| jksoft | 0:dde3f92088d5 | 544 | } |
| jksoft | 0:dde3f92088d5 | 545 | |
| jksoft | 0:dde3f92088d5 | 546 | void Release(Endpoint* endpoint) |
| jksoft | 0:dde3f92088d5 | 547 | { |
| jksoft | 0:dde3f92088d5 | 548 | if (endpoint->CurrentState == Endpoint::NotQueued) |
| jksoft | 0:dde3f92088d5 | 549 | { |
| jksoft | 0:dde3f92088d5 | 550 | // Never event used it, nothing to do |
| jksoft | 0:dde3f92088d5 | 551 | } |
| jksoft | 0:dde3f92088d5 | 552 | else |
| jksoft | 0:dde3f92088d5 | 553 | { |
| jksoft | 0:dde3f92088d5 | 554 | HCED* ed = (HCED*)endpoint; |
| jksoft | 0:dde3f92088d5 | 555 | ed->Control |= 0x4000; // SKIP |
| jksoft | 0:dde3f92088d5 | 556 | switch (endpoint->Flags & 0x03) |
| jksoft | 0:dde3f92088d5 | 557 | { |
| jksoft | 0:dde3f92088d5 | 558 | case ENDPOINT_CONTROL: |
| jksoft | 0:dde3f92088d5 | 559 | Remove(ed,(volatile HCED**)&LPC_USB->HcControlHeadED); |
| jksoft | 0:dde3f92088d5 | 560 | break; |
| jksoft | 0:dde3f92088d5 | 561 | case ENDPOINT_BULK: |
| jksoft | 0:dde3f92088d5 | 562 | Remove(ed,(volatile HCED**)&LPC_USB->HcBulkHeadED); |
| jksoft | 0:dde3f92088d5 | 563 | break; |
| jksoft | 0:dde3f92088d5 | 564 | case ENDPOINT_INTERRUPT: |
| jksoft | 0:dde3f92088d5 | 565 | for (int i = 0; i < 32; i++) |
| jksoft | 0:dde3f92088d5 | 566 | Remove(ed,(volatile HCED**)&CommunicationArea.InterruptTable[i]); |
| jksoft | 0:dde3f92088d5 | 567 | break; |
| jksoft | 0:dde3f92088d5 | 568 | } |
| jksoft | 0:dde3f92088d5 | 569 | |
| jksoft | 0:dde3f92088d5 | 570 | u16 fn = CommunicationArea.FrameNumber; |
| jksoft | 0:dde3f92088d5 | 571 | while (fn == CommunicationArea.FrameNumber) |
| jksoft | 0:dde3f92088d5 | 572 | ; // Wait for next frame |
| jksoft | 0:dde3f92088d5 | 573 | |
| jksoft | 0:dde3f92088d5 | 574 | } |
| jksoft | 0:dde3f92088d5 | 575 | |
| jksoft | 0:dde3f92088d5 | 576 | // In theory, the endpoint is now dead. |
| jksoft | 0:dde3f92088d5 | 577 | // TODO: Will Callbacks ever be pending? BUGBUG |
| jksoft | 0:dde3f92088d5 | 578 | memset(endpoint,0,sizeof(Endpoint)); |
| jksoft | 0:dde3f92088d5 | 579 | } |
| jksoft | 0:dde3f92088d5 | 580 | |
| jksoft | 0:dde3f92088d5 | 581 | // Pop the last TD from the list |
| jksoft | 0:dde3f92088d5 | 582 | HCTD* Reverse(HCTD* current) |
| jksoft | 0:dde3f92088d5 | 583 | { |
| jksoft | 0:dde3f92088d5 | 584 | HCTD *result = NULL,*temp; |
| jksoft | 0:dde3f92088d5 | 585 | while (current) |
| jksoft | 0:dde3f92088d5 | 586 | { |
| jksoft | 0:dde3f92088d5 | 587 | temp = (HCTD*)current->Next; |
| jksoft | 0:dde3f92088d5 | 588 | current->Next = (u32)result; |
| jksoft | 0:dde3f92088d5 | 589 | result = current; |
| jksoft | 0:dde3f92088d5 | 590 | current = temp; |
| jksoft | 0:dde3f92088d5 | 591 | } |
| jksoft | 0:dde3f92088d5 | 592 | return result; |
| jksoft | 0:dde3f92088d5 | 593 | } |
| jksoft | 0:dde3f92088d5 | 594 | |
| jksoft | 0:dde3f92088d5 | 595 | // Called from interrupt... |
| jksoft | 0:dde3f92088d5 | 596 | // Control endpoints use a state machine to progress through the transfers |
| jksoft | 0:dde3f92088d5 | 597 | void ProcessDoneQueue(u32 tdList) |
| jksoft | 0:dde3f92088d5 | 598 | { |
| jksoft | 0:dde3f92088d5 | 599 | |
| jksoft | 0:dde3f92088d5 | 600 | LOG("<<ProcessDoneQueue enter>>\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 601 | HCTD* list = Reverse((HCTD*)tdList); |
| jksoft | 0:dde3f92088d5 | 602 | while (list) |
| jksoft | 0:dde3f92088d5 | 603 | { |
| jksoft | 0:dde3f92088d5 | 604 | Endpoint* endpoint = (Endpoint*)(list-1); |
| jksoft | 0:dde3f92088d5 | 605 | list = (HCTD*)list->Next; |
| jksoft | 0:dde3f92088d5 | 606 | int ep = endpoint->Address(); |
| jksoft | 0:dde3f92088d5 | 607 | bool in = endpoint->Flags & 0x80; |
| jksoft | 0:dde3f92088d5 | 608 | int status = (endpoint->TDHead.Control >> 28) & 0xF; |
| jksoft | 0:dde3f92088d5 | 609 | |
| jksoft | 0:dde3f92088d5 | 610 | //LOG("ProcessDoneQueue %02X %08X\r\r\n",ep,endpoint->TDHead.Control); |
| jksoft | 0:dde3f92088d5 | 611 | |
| jksoft | 0:dde3f92088d5 | 612 | if (status != 0) |
| jksoft | 0:dde3f92088d5 | 613 | { |
| jksoft | 0:dde3f92088d5 | 614 | LOG("ProcessDoneQueue status %02X %d\r\r\n",ep,status); |
| jksoft | 0:dde3f92088d5 | 615 | LOG("CurrentState Change Idle endpoint(%d) currentState =%d\r\r\n",endpoint->Address(),endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 616 | endpoint->CurrentState = Endpoint::Idle; |
| jksoft | 0:dde3f92088d5 | 617 | |
| jksoft | 0:dde3f92088d5 | 618 | |
| jksoft | 0:dde3f92088d5 | 619 | } else { |
| jksoft | 0:dde3f92088d5 | 620 | switch (endpoint->CurrentState) |
| jksoft | 0:dde3f92088d5 | 621 | { |
| jksoft | 0:dde3f92088d5 | 622 | case Endpoint::SetupQueued: |
| jksoft | 0:dde3f92088d5 | 623 | if (endpoint->Length == 0) |
| jksoft | 0:dde3f92088d5 | 624 | { |
| jksoft | 0:dde3f92088d5 | 625 | LOG("ProcessDoneQueue endpoint->Length == 0 endpoint->CurrentState=%d\r\r\n",endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 626 | Transfer(endpoint,in ? TOKEN_OUT : TOKEN_IN,0,0,Endpoint::StatusQueued); // Skip Data Phase |
| jksoft | 0:dde3f92088d5 | 627 | } |
| jksoft | 0:dde3f92088d5 | 628 | else |
| jksoft | 0:dde3f92088d5 | 629 | { |
| jksoft | 0:dde3f92088d5 | 630 | LOG("ProcessDoneQueue endpoint->Length != 0 endpoint->CurrentState=%d\r\r\n",endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 631 | Transfer(endpoint,in ? TOKEN_IN : TOKEN_OUT,endpoint->Data,endpoint->Length, Endpoint::DataQueued); // Setup is done, now Data |
| jksoft | 0:dde3f92088d5 | 632 | } |
| jksoft | 0:dde3f92088d5 | 633 | break; |
| jksoft | 0:dde3f92088d5 | 634 | |
| jksoft | 0:dde3f92088d5 | 635 | case Endpoint::DataQueued: |
| jksoft | 0:dde3f92088d5 | 636 | if (endpoint->TDHead.CurrBufPtr) |
| jksoft | 0:dde3f92088d5 | 637 | endpoint->Length = endpoint->TDHead.CurrBufPtr - (u32)endpoint->Data; |
| jksoft | 0:dde3f92088d5 | 638 | |
| jksoft | 0:dde3f92088d5 | 639 | if (ep == 0) |
| jksoft | 0:dde3f92088d5 | 640 | { |
| jksoft | 0:dde3f92088d5 | 641 | LOG("ProcessDoneQueue ep == 0 endpoint->CurrentState=%d\r\r\n",endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 642 | Transfer(endpoint,in ? TOKEN_OUT : TOKEN_IN,0,0,Endpoint::StatusQueued); // Data is done, now Status, Control only |
| jksoft | 0:dde3f92088d5 | 643 | } |
| jksoft | 0:dde3f92088d5 | 644 | else |
| jksoft | 0:dde3f92088d5 | 645 | { |
| jksoft | 0:dde3f92088d5 | 646 | |
| jksoft | 0:dde3f92088d5 | 647 | LOG("ProcessDoneQueue ep != 0 endpoint->CurrentState=%d\r\r\n",endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 648 | endpoint->CurrentState = Endpoint::Idle; |
| jksoft | 0:dde3f92088d5 | 649 | LOG("CurrentState Change Idle endpoint(%d) currentState =%d\r\r\n",endpoint->Address(),endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 650 | } |
| jksoft | 0:dde3f92088d5 | 651 | break; |
| jksoft | 0:dde3f92088d5 | 652 | |
| jksoft | 0:dde3f92088d5 | 653 | case Endpoint::StatusQueued: // Transaction is done |
| jksoft | 0:dde3f92088d5 | 654 | LOG("CurrentState Change Idle endpoint(%d) currentState =%d\r\r\n",endpoint->Address(),endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 655 | endpoint->CurrentState = Endpoint::Idle; |
| jksoft | 0:dde3f92088d5 | 656 | break; |
| jksoft | 0:dde3f92088d5 | 657 | } |
| jksoft | 0:dde3f92088d5 | 658 | } |
| jksoft | 0:dde3f92088d5 | 659 | |
| jksoft | 0:dde3f92088d5 | 660 | // Complete, flag if we need a callback |
| jksoft | 0:dde3f92088d5 | 661 | if (endpoint->Callback && endpoint->CurrentState == Endpoint::Idle) |
| jksoft | 0:dde3f92088d5 | 662 | { |
| jksoft | 0:dde3f92088d5 | 663 | endpoint->CurrentState = Endpoint::CallbackPending; |
| jksoft | 0:dde3f92088d5 | 664 | _callbacksPending++; |
| jksoft | 0:dde3f92088d5 | 665 | } |
| jksoft | 0:dde3f92088d5 | 666 | } |
| jksoft | 0:dde3f92088d5 | 667 | LOG("<<ProcessDoneQueue out>>\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 668 | } |
| jksoft | 0:dde3f92088d5 | 669 | |
| jksoft | 0:dde3f92088d5 | 670 | // Hack to reset devices that don't want to connect |
| jksoft | 0:dde3f92088d5 | 671 | int AddDevice(int hub, int port, bool isLowSpeed) |
| jksoft | 0:dde3f92088d5 | 672 | { |
| jksoft | 0:dde3f92088d5 | 673 | int device = AddDeviceCore(hub,port,isLowSpeed); |
| jksoft | 0:dde3f92088d5 | 674 | if (device < 0) |
| jksoft | 0:dde3f92088d5 | 675 | { |
| jksoft | 0:dde3f92088d5 | 676 | LOG("========RETRY ADD DEVICE========\r\r\n"); // This will go for ever.. TODO power cycle root? |
| jksoft | 0:dde3f92088d5 | 677 | Disconnect(hub,port); // Could not read descriptor at assigned address, reset this port and try again |
| jksoft | 0:dde3f92088d5 | 678 | ResetPort(hub,port); // Cheap bluetooth dongles often need this on a hotplug |
| jksoft | 0:dde3f92088d5 | 679 | return -1; |
| jksoft | 0:dde3f92088d5 | 680 | } |
| jksoft | 0:dde3f92088d5 | 681 | return device; |
| jksoft | 0:dde3f92088d5 | 682 | } |
| jksoft | 0:dde3f92088d5 | 683 | |
| jksoft | 0:dde3f92088d5 | 684 | int AddDeviceCore(int hub, int port, bool isLowSpeed) |
| jksoft | 0:dde3f92088d5 | 685 | { |
| jksoft | 0:dde3f92088d5 | 686 | int lowSpeed = isLowSpeed ? 0x2000 : 0; |
| jksoft | 0:dde3f92088d5 | 687 | DeviceDescriptor desc; |
| jksoft | 0:dde3f92088d5 | 688 | EndpointZero.EndpointDescriptor.Control = (8 << 16) | lowSpeed; // MaxPacketSize == 8 |
| jksoft | 0:dde3f92088d5 | 689 | int r = GetDescriptor(0,DESCRIPTOR_TYPE_DEVICE,0,(u8*)&desc,8); |
| jksoft | 0:dde3f92088d5 | 690 | if (r < 0) |
| jksoft | 0:dde3f92088d5 | 691 | { |
| jksoft | 0:dde3f92088d5 | 692 | LOG("FAILED TO LOAD DESCRIPTOR FOR DEVICE 0\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 693 | return r; |
| jksoft | 0:dde3f92088d5 | 694 | } |
| jksoft | 0:dde3f92088d5 | 695 | |
| jksoft | 0:dde3f92088d5 | 696 | EndpointZero.EndpointDescriptor.Control = (desc.bMaxPacketSize << 16) | lowSpeed; // Actual MaxPacketSize |
| jksoft | 0:dde3f92088d5 | 697 | r = GetDescriptor(0,DESCRIPTOR_TYPE_DEVICE,0,(u8*)&desc,sizeof(desc)); |
| jksoft | 0:dde3f92088d5 | 698 | if (r < 0) |
| jksoft | 0:dde3f92088d5 | 699 | return r; |
| jksoft | 0:dde3f92088d5 | 700 | |
| jksoft | 0:dde3f92088d5 | 701 | LOG("\r\nClass %02X found %04X:%04X\r\r\n",desc.bDeviceClass,desc.idVendor,desc.idProduct); |
| jksoft | 0:dde3f92088d5 | 702 | |
| jksoft | 0:dde3f92088d5 | 703 | // Now assign the device an address, move off EndpointZero |
| jksoft | 0:dde3f92088d5 | 704 | int device = 0; |
| jksoft | 0:dde3f92088d5 | 705 | for (int i = 0; i < MAX_DEVICES; i++) |
| jksoft | 0:dde3f92088d5 | 706 | { |
| jksoft | 0:dde3f92088d5 | 707 | if (Devices[i].Port == 0) |
| jksoft | 0:dde3f92088d5 | 708 | { |
| jksoft | 0:dde3f92088d5 | 709 | device = i+1; |
| jksoft | 0:dde3f92088d5 | 710 | break; |
| jksoft | 0:dde3f92088d5 | 711 | } |
| jksoft | 0:dde3f92088d5 | 712 | } |
| jksoft | 0:dde3f92088d5 | 713 | if (!device) |
| jksoft | 0:dde3f92088d5 | 714 | return ERR_DEVICE_NONE_LEFT; |
| jksoft | 0:dde3f92088d5 | 715 | |
| jksoft | 0:dde3f92088d5 | 716 | r = SetAddress(0,device); |
| jksoft | 0:dde3f92088d5 | 717 | if (r) |
| jksoft | 0:dde3f92088d5 | 718 | return r; |
| jksoft | 0:dde3f92088d5 | 719 | DelayMS(2); |
| jksoft | 0:dde3f92088d5 | 720 | |
| jksoft | 0:dde3f92088d5 | 721 | // Now at a nonzero address, create control endpoint |
| jksoft | 0:dde3f92088d5 | 722 | Device* dev = &Devices[device-1]; |
| jksoft | 0:dde3f92088d5 | 723 | dev->Init(&desc,hub,port,device,lowSpeed); |
| jksoft | 0:dde3f92088d5 | 724 | AddEndpoint(device,0,ENDPOINT_CONTROL,desc.bMaxPacketSize,0); |
| jksoft | 0:dde3f92088d5 | 725 | _connectPending = 0; |
| jksoft | 0:dde3f92088d5 | 726 | |
| jksoft | 0:dde3f92088d5 | 727 | // Verify this all works |
| jksoft | 0:dde3f92088d5 | 728 | r = GetDescriptor(device,DESCRIPTOR_TYPE_DEVICE,0,(u8*)&desc,sizeof(desc)); |
| jksoft | 0:dde3f92088d5 | 729 | if (r < 0) |
| jksoft | 0:dde3f92088d5 | 730 | return r; |
| jksoft | 0:dde3f92088d5 | 731 | |
| jksoft | 0:dde3f92088d5 | 732 | // Set to interface 0 by default |
| jksoft | 0:dde3f92088d5 | 733 | // Calls LoadDevice if interface is found |
| jksoft | 0:dde3f92088d5 | 734 | r = SetConfigurationAndInterface(device,1,0,&desc); |
| jksoft | 0:dde3f92088d5 | 735 | |
| jksoft | 0:dde3f92088d5 | 736 | if (desc.bDeviceClass == CLASS_HUB) |
| jksoft | 0:dde3f92088d5 | 737 | InitHub(device); // Handle hubs in this code |
| jksoft | 0:dde3f92088d5 | 738 | |
| jksoft | 0:dde3f92088d5 | 739 | return device; |
| jksoft | 0:dde3f92088d5 | 740 | } |
| jksoft | 0:dde3f92088d5 | 741 | |
| jksoft | 0:dde3f92088d5 | 742 | // Walk descriptors and create endpoints for a given device |
| jksoft | 0:dde3f92088d5 | 743 | // TODO configuration !=1, alternate settings etc. |
| jksoft | 0:dde3f92088d5 | 744 | int SetConfigurationAndInterface(int device, int configuration, int interfaceNumber, DeviceDescriptor* desc) |
| jksoft | 0:dde3f92088d5 | 745 | { |
| jksoft | 0:dde3f92088d5 | 746 | u8 buffer[255]; |
| jksoft | 0:dde3f92088d5 | 747 | int err = GetDescriptor(device,DESCRIPTOR_TYPE_CONFIGURATION,0,buffer,sizeof(buffer)); |
| jksoft | 0:dde3f92088d5 | 748 | if (err < 0) |
| jksoft | 0:dde3f92088d5 | 749 | return err; |
| jksoft | 0:dde3f92088d5 | 750 | |
| jksoft | 0:dde3f92088d5 | 751 | err = SetConfiguration(device,configuration); |
| jksoft | 0:dde3f92088d5 | 752 | if (err < 0) |
| jksoft | 0:dde3f92088d5 | 753 | return err; |
| jksoft | 0:dde3f92088d5 | 754 | |
| jksoft | 0:dde3f92088d5 | 755 | // Add the endpoints for this interface |
| jksoft | 0:dde3f92088d5 | 756 | int len = buffer[2] | (buffer[3] << 8); |
| jksoft | 0:dde3f92088d5 | 757 | u8* d = buffer; |
| jksoft | 0:dde3f92088d5 | 758 | u8* end = d + len; |
| jksoft | 0:dde3f92088d5 | 759 | InterfaceDescriptor* found = 0; |
| jksoft | 0:dde3f92088d5 | 760 | while (d < end) |
| jksoft | 0:dde3f92088d5 | 761 | { |
| jksoft | 0:dde3f92088d5 | 762 | if (d[1] == DESCRIPTOR_TYPE_INTERFACE) |
| jksoft | 0:dde3f92088d5 | 763 | { |
| jksoft | 0:dde3f92088d5 | 764 | InterfaceDescriptor* id = (InterfaceDescriptor*)d; |
| jksoft | 0:dde3f92088d5 | 765 | if (id->bInterfaceNumber == interfaceNumber) |
| jksoft | 0:dde3f92088d5 | 766 | { |
| jksoft | 0:dde3f92088d5 | 767 | found = id; |
| jksoft | 0:dde3f92088d5 | 768 | d += d[0]; |
| jksoft | 0:dde3f92088d5 | 769 | while (d < end && d[1] != DESCRIPTOR_TYPE_INTERFACE) |
| jksoft | 0:dde3f92088d5 | 770 | { |
| jksoft | 0:dde3f92088d5 | 771 | switch (d[1]) |
| jksoft | 0:dde3f92088d5 | 772 | { |
| jksoft | 0:dde3f92088d5 | 773 | case DESCRIPTOR_TYPE_ENDPOINT: |
| jksoft | 0:dde3f92088d5 | 774 | AddEndpoint(device,(EndpointDescriptor*)d); |
| jksoft | 0:dde3f92088d5 | 775 | break; |
| jksoft | 0:dde3f92088d5 | 776 | default: |
| jksoft | 0:dde3f92088d5 | 777 | LOG("Skipping descriptor %02X (%d bytes)\r\r\n",d[1],d[0]); |
| jksoft | 0:dde3f92088d5 | 778 | } |
| jksoft | 0:dde3f92088d5 | 779 | d += d[0]; |
| jksoft | 0:dde3f92088d5 | 780 | } |
| jksoft | 0:dde3f92088d5 | 781 | } |
| jksoft | 0:dde3f92088d5 | 782 | } |
| jksoft | 0:dde3f92088d5 | 783 | d += d[0]; |
| jksoft | 0:dde3f92088d5 | 784 | } |
| jksoft | 0:dde3f92088d5 | 785 | |
| jksoft | 0:dde3f92088d5 | 786 | if (!found) |
| jksoft | 0:dde3f92088d5 | 787 | return ERR_INTERFACE_NOT_FOUND; |
| jksoft | 0:dde3f92088d5 | 788 | OnLoadDevice(device,desc,found); |
| jksoft | 0:dde3f92088d5 | 789 | return 0; |
| jksoft | 0:dde3f92088d5 | 790 | } |
| jksoft | 0:dde3f92088d5 | 791 | |
| jksoft | 0:dde3f92088d5 | 792 | void Init() |
| jksoft | 0:dde3f92088d5 | 793 | { |
| jksoft | 0:dde3f92088d5 | 794 | LOG("USB INIT (Controller is %d bytes)\r\r\n",sizeof(*this)); |
| jksoft | 0:dde3f92088d5 | 795 | memset(this,0,sizeof(HostController)); |
| jksoft | 0:dde3f92088d5 | 796 | EndpointZero.CurrentState = Endpoint::NotQueued; |
| jksoft | 0:dde3f92088d5 | 797 | HWInit(&CommunicationArea); |
| jksoft | 0:dde3f92088d5 | 798 | DelayMS(10); |
| jksoft | 0:dde3f92088d5 | 799 | } |
| jksoft | 0:dde3f92088d5 | 800 | |
| jksoft | 0:dde3f92088d5 | 801 | void ResetPort(int hub, int port) |
| jksoft | 0:dde3f92088d5 | 802 | { |
| jksoft | 0:dde3f92088d5 | 803 | LOG("ResetPort Hub:%d Port:%d\r\r\n",hub,port); |
| jksoft | 0:dde3f92088d5 | 804 | _connectPending++; // Only reset/add 1 device at a time |
| jksoft | 0:dde3f92088d5 | 805 | if (hub == 0) |
| jksoft | 0:dde3f92088d5 | 806 | LPC_USB->HcRhPortStatus1 = PortResetStatus; // Reset Root Hub, port 1 |
| jksoft | 0:dde3f92088d5 | 807 | else |
| jksoft | 0:dde3f92088d5 | 808 | SetPortReset(hub,port); // or reset other hub |
| jksoft | 0:dde3f92088d5 | 809 | } |
| jksoft | 0:dde3f92088d5 | 810 | |
| jksoft | 0:dde3f92088d5 | 811 | void Disconnect(int hub, int port) |
| jksoft | 0:dde3f92088d5 | 812 | { |
| jksoft | 0:dde3f92088d5 | 813 | LOG("Disconnect Hub:%d Port:%d\r\r\n",hub,port); // Mark a device for destruction |
| jksoft | 0:dde3f92088d5 | 814 | for (int i = 0; i < MAX_DEVICES; i++) |
| jksoft | 0:dde3f92088d5 | 815 | { |
| jksoft | 0:dde3f92088d5 | 816 | Device* dev = Devices + i; |
| jksoft | 0:dde3f92088d5 | 817 | if (dev->Port == port && dev->Hub == hub) |
| jksoft | 0:dde3f92088d5 | 818 | { |
| jksoft | 0:dde3f92088d5 | 819 | // Disconnect everything that is attached to this device if it is a hub |
| jksoft | 0:dde3f92088d5 | 820 | for (int p = 0; p < dev->HubPortCount; p++) |
| jksoft | 0:dde3f92088d5 | 821 | Disconnect(i+1,p+1); |
| jksoft | 0:dde3f92088d5 | 822 | |
| jksoft | 0:dde3f92088d5 | 823 | // Now release endpoints |
| jksoft | 0:dde3f92088d5 | 824 | for (int j = 1; j < MAX_ENDPOINTS_PER_DEVICE*2; j += 2) |
| jksoft | 0:dde3f92088d5 | 825 | { |
| jksoft | 0:dde3f92088d5 | 826 | u8 endpointIndex = dev->_endpointMap[j]; |
| jksoft | 0:dde3f92088d5 | 827 | if (endpointIndex != 0xFF) |
| jksoft | 0:dde3f92088d5 | 828 | Release(Endpoints + endpointIndex); |
| jksoft | 0:dde3f92088d5 | 829 | } |
| jksoft | 0:dde3f92088d5 | 830 | dev->Port = 0; // Device is now free |
| jksoft | 0:dde3f92088d5 | 831 | dev->Flags = 0; |
| jksoft | 0:dde3f92088d5 | 832 | return; |
| jksoft | 0:dde3f92088d5 | 833 | } |
| jksoft | 0:dde3f92088d5 | 834 | } |
| jksoft | 0:dde3f92088d5 | 835 | } |
| jksoft | 0:dde3f92088d5 | 836 | |
| jksoft | 0:dde3f92088d5 | 837 | // called after reset |
| jksoft | 0:dde3f92088d5 | 838 | void Connect(int hub, int port, bool lowspeed) |
| jksoft | 0:dde3f92088d5 | 839 | { |
| jksoft | 0:dde3f92088d5 | 840 | LOG("Connect Hub:%d Port:%d %s\r\r\n",hub,port,lowspeed ? "slow" : "full"); |
| jksoft | 0:dde3f92088d5 | 841 | AddDevice(hub,port,lowspeed); |
| jksoft | 0:dde3f92088d5 | 842 | } |
| jksoft | 0:dde3f92088d5 | 843 | |
| jksoft | 0:dde3f92088d5 | 844 | // Called from interrupt |
| jksoft | 0:dde3f92088d5 | 845 | void HubStatusChange(int hub, int port, u32 status) |
| jksoft | 0:dde3f92088d5 | 846 | { |
| jksoft | 0:dde3f92088d5 | 847 | LOG("HubStatusChange Hub:%d Port:%d %08X\r\r\n",hub,port,status); |
| jksoft | 0:dde3f92088d5 | 848 | if (status & ConnectStatusChange) |
| jksoft | 0:dde3f92088d5 | 849 | { |
| jksoft | 0:dde3f92088d5 | 850 | if (status & CurrentConnectStatus) // Connecting |
| jksoft | 0:dde3f92088d5 | 851 | ResetPort(hub,port); // Reset to initiate connect (state machine?) |
| jksoft | 0:dde3f92088d5 | 852 | else |
| jksoft | 0:dde3f92088d5 | 853 | Disconnect(hub,port); |
| jksoft | 0:dde3f92088d5 | 854 | } |
| jksoft | 0:dde3f92088d5 | 855 | |
| jksoft | 0:dde3f92088d5 | 856 | if (status & PortResetStatusChange) |
| jksoft | 0:dde3f92088d5 | 857 | { |
| jksoft | 0:dde3f92088d5 | 858 | if (!(status & PortResetStatus)) |
| jksoft | 0:dde3f92088d5 | 859 | { |
| jksoft | 0:dde3f92088d5 | 860 | _connectCountdown = 200; // Schedule a connection in 200ms |
| jksoft | 0:dde3f92088d5 | 861 | if (status & LowspeedDevice) |
| jksoft | 0:dde3f92088d5 | 862 | port |= 0x80; |
| jksoft | 0:dde3f92088d5 | 863 | _connectHub = hub; |
| jksoft | 0:dde3f92088d5 | 864 | _connectPort = port; |
| jksoft | 0:dde3f92088d5 | 865 | } |
| jksoft | 0:dde3f92088d5 | 866 | } |
| jksoft | 0:dde3f92088d5 | 867 | } |
| jksoft | 0:dde3f92088d5 | 868 | |
| jksoft | 0:dde3f92088d5 | 869 | #define HOST_CLK_EN (1<<0) |
| jksoft | 0:dde3f92088d5 | 870 | #define PORTSEL_CLK_EN (1<<3) |
| jksoft | 0:dde3f92088d5 | 871 | #define AHB_CLK_EN (1<<4) |
| jksoft | 0:dde3f92088d5 | 872 | #define CLOCK_MASK (HOST_CLK_EN | PORTSEL_CLK_EN | AHB_CLK_EN) |
| jksoft | 0:dde3f92088d5 | 873 | |
| jksoft | 0:dde3f92088d5 | 874 | #define FRAMEINTERVAL (12000-1) // 1ms |
| jksoft | 0:dde3f92088d5 | 875 | #define DEFAULT_FMINTERVAL ((((6 * (FRAMEINTERVAL - 210)) / 7) << 16) | FRAMEINTERVAL) |
| jksoft | 0:dde3f92088d5 | 876 | |
| jksoft | 0:dde3f92088d5 | 877 | void DelayMS(int ms) |
| jksoft | 0:dde3f92088d5 | 878 | { |
| jksoft | 0:dde3f92088d5 | 879 | u16 f = ms + CommunicationArea.FrameNumber; |
| jksoft | 0:dde3f92088d5 | 880 | while (f != CommunicationArea.FrameNumber) |
| jksoft | 0:dde3f92088d5 | 881 | ; |
| jksoft | 0:dde3f92088d5 | 882 | } |
| jksoft | 0:dde3f92088d5 | 883 | |
| jksoft | 0:dde3f92088d5 | 884 | static void HWInit(HCCA* cca) |
| jksoft | 0:dde3f92088d5 | 885 | { |
| jksoft | 0:dde3f92088d5 | 886 | NVIC_DisableIRQ(USB_IRQn); |
| jksoft | 0:dde3f92088d5 | 887 | |
| jksoft | 0:dde3f92088d5 | 888 | // turn on power for USB |
| jksoft | 0:dde3f92088d5 | 889 | LPC_SC->PCONP |= (1UL<<31); |
| jksoft | 0:dde3f92088d5 | 890 | // Enable USB host clock, port selection and AHB clock |
| jksoft | 0:dde3f92088d5 | 891 | LPC_USB->USBClkCtrl |= CLOCK_MASK; |
| jksoft | 0:dde3f92088d5 | 892 | // Wait for clocks to become available |
| jksoft | 0:dde3f92088d5 | 893 | while ((LPC_USB->USBClkSt & CLOCK_MASK) != CLOCK_MASK) |
| jksoft | 0:dde3f92088d5 | 894 | ; |
| jksoft | 0:dde3f92088d5 | 895 | |
| jksoft | 0:dde3f92088d5 | 896 | // We are a Host |
| jksoft | 0:dde3f92088d5 | 897 | LPC_USB->OTGStCtrl |= 1; |
| jksoft | 0:dde3f92088d5 | 898 | LPC_USB->USBClkCtrl &= ~PORTSEL_CLK_EN; // we don't need port selection clock until we do OTG |
| jksoft | 0:dde3f92088d5 | 899 | |
| jksoft | 0:dde3f92088d5 | 900 | // configure USB pins |
| jksoft | 0:dde3f92088d5 | 901 | LPC_PINCON->PINSEL1 &= ~((3<<26)|(3<<28)); |
| jksoft | 0:dde3f92088d5 | 902 | LPC_PINCON->PINSEL1 |= ((1<<26)|(1<<28)); // USB D+/D- |
| jksoft | 0:dde3f92088d5 | 903 | |
| jksoft | 0:dde3f92088d5 | 904 | LPC_PINCON->PINSEL3 &= ~((3 << 6) | (3 << 22)); // USB_PPWR, USB_OVRCR |
| jksoft | 0:dde3f92088d5 | 905 | LPC_PINCON->PINSEL3 |= ((2 << 6) | (2 << 22)); |
| jksoft | 0:dde3f92088d5 | 906 | |
| jksoft | 0:dde3f92088d5 | 907 | LPC_PINCON->PINSEL4 &= ~(3 << 18); // USB_CONNECT |
| jksoft | 0:dde3f92088d5 | 908 | LPC_PINCON->PINSEL4 |= (1 << 18); |
| jksoft | 0:dde3f92088d5 | 909 | |
| jksoft | 0:dde3f92088d5 | 910 | // Reset OHCI block |
| jksoft | 0:dde3f92088d5 | 911 | LPC_USB->HcControl = 0; |
| jksoft | 0:dde3f92088d5 | 912 | LPC_USB->HcControlHeadED = 0; |
| jksoft | 0:dde3f92088d5 | 913 | LPC_USB->HcBulkHeadED = 0; |
| jksoft | 0:dde3f92088d5 | 914 | |
| jksoft | 0:dde3f92088d5 | 915 | LPC_USB->HcCommandStatus = HostControllerReset; |
| jksoft | 0:dde3f92088d5 | 916 | LPC_USB->HcFmInterval = DEFAULT_FMINTERVAL; |
| jksoft | 0:dde3f92088d5 | 917 | LPC_USB->HcPeriodicStart = FRAMEINTERVAL*90/100; |
| jksoft | 0:dde3f92088d5 | 918 | |
| jksoft | 0:dde3f92088d5 | 919 | LPC_USB->HcControl = (LPC_USB->HcControl & (~HostControllerFunctionalState)) | OperationalMask; |
| jksoft | 0:dde3f92088d5 | 920 | LPC_USB->HcRhStatus = SetGlobalPower; |
| jksoft | 0:dde3f92088d5 | 921 | |
| jksoft | 0:dde3f92088d5 | 922 | LPC_USB->HcHCCA = (u32)cca; |
| jksoft | 0:dde3f92088d5 | 923 | LPC_USB->HcInterruptStatus |= LPC_USB->HcInterruptStatus; |
| jksoft | 0:dde3f92088d5 | 924 | LPC_USB->HcInterruptEnable = MasterInterruptEnable | WritebackDoneHead | RootHubStatusChange | FrameNumberOverflow; |
| jksoft | 0:dde3f92088d5 | 925 | |
| jksoft | 0:dde3f92088d5 | 926 | NVIC_SetPriority(USB_IRQn, 0); |
| jksoft | 0:dde3f92088d5 | 927 | NVIC_EnableIRQ(USB_IRQn); |
| jksoft | 0:dde3f92088d5 | 928 | while (cca->FrameNumber < 10) |
| jksoft | 0:dde3f92088d5 | 929 | ; // 10ms delay before diving in |
| jksoft | 0:dde3f92088d5 | 930 | } |
| jksoft | 0:dde3f92088d5 | 931 | }; |
| jksoft | 0:dde3f92088d5 | 932 | |
| jksoft | 0:dde3f92088d5 | 933 | //==================================================================================== |
| jksoft | 0:dde3f92088d5 | 934 | //==================================================================================== |
| jksoft | 0:dde3f92088d5 | 935 | // Host controller instance and Interrupt handler |
| jksoft | 0:dde3f92088d5 | 936 | |
| jksoft | 0:dde3f92088d5 | 937 | static HostController _controller __attribute__((at(USB_RAM_BASE))); |
| jksoft | 0:dde3f92088d5 | 938 | |
| jksoft | 0:dde3f92088d5 | 939 | extern "C" void USB_IRQHandler(void) __irq; |
| jksoft | 0:dde3f92088d5 | 940 | void USB_IRQHandler (void) __irq |
| jksoft | 0:dde3f92088d5 | 941 | { |
| jksoft | 0:dde3f92088d5 | 942 | LOG("USB_IRQHandler start \r\r\n"); |
| jksoft | 0:dde3f92088d5 | 943 | u32 int_status = LPC_USB->HcInterruptStatus; |
| jksoft | 0:dde3f92088d5 | 944 | LOG("USB_IRQHandler int_status=%0x\r\r\n",int_status); |
| jksoft | 0:dde3f92088d5 | 945 | |
| jksoft | 0:dde3f92088d5 | 946 | if(int_status & UnrecoverableError) //Error |
| jksoft | 0:dde3f92088d5 | 947 | { |
| jksoft | 0:dde3f92088d5 | 948 | LOG("USB_IRQHandler UnrecoverableError Please reset\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 949 | } |
| jksoft | 0:dde3f92088d5 | 950 | |
| jksoft | 0:dde3f92088d5 | 951 | if(int_status & MasterInterruptEnable) |
| jksoft | 0:dde3f92088d5 | 952 | { |
| jksoft | 0:dde3f92088d5 | 953 | LOG("USB_IRQHandler MasterInterruptEnable\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 954 | } |
| jksoft | 0:dde3f92088d5 | 955 | |
| jksoft | 0:dde3f92088d5 | 956 | if(int_status &OwnershipChange) |
| jksoft | 0:dde3f92088d5 | 957 | { |
| jksoft | 0:dde3f92088d5 | 958 | LOG("USB_IRQHandler OwnershipChange\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 959 | } |
| jksoft | 0:dde3f92088d5 | 960 | |
| jksoft | 0:dde3f92088d5 | 961 | if(int_status &FrameNumberOverflow) |
| jksoft | 0:dde3f92088d5 | 962 | { |
| jksoft | 0:dde3f92088d5 | 963 | LOG("USB_IRQHandler FrameNumberOverflow\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 964 | } |
| jksoft | 0:dde3f92088d5 | 965 | if(int_status&ResumeDetected) |
| jksoft | 0:dde3f92088d5 | 966 | { |
| jksoft | 0:dde3f92088d5 | 967 | LOG("USB_IRQHandler ResumeDetected\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 968 | } |
| jksoft | 0:dde3f92088d5 | 969 | if(int_status&StartofFrame) |
| jksoft | 0:dde3f92088d5 | 970 | { |
| jksoft | 0:dde3f92088d5 | 971 | LOG("USB_IRQHandler StartofFrame\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 972 | } |
| jksoft | 0:dde3f92088d5 | 973 | |
| jksoft | 0:dde3f92088d5 | 974 | |
| jksoft | 0:dde3f92088d5 | 975 | if (int_status & RootHubStatusChange) // Root hub status change |
| jksoft | 0:dde3f92088d5 | 976 | { |
| jksoft | 0:dde3f92088d5 | 977 | LOG("USB_IRQHandler _rootHubStatusChange %0x->%0x \r\r\n", _controller._rootHubStatusChange, _controller._rootHubStatusChange+1); |
| jksoft | 0:dde3f92088d5 | 978 | _controller._rootHubStatusChange++; // Just flag the controller, will be processed in USBLoop |
| jksoft | 0:dde3f92088d5 | 979 | } |
| jksoft | 0:dde3f92088d5 | 980 | |
| jksoft | 0:dde3f92088d5 | 981 | u32 head = 0; |
| jksoft | 0:dde3f92088d5 | 982 | if (int_status & WritebackDoneHead) |
| jksoft | 0:dde3f92088d5 | 983 | { |
| jksoft | 0:dde3f92088d5 | 984 | head = _controller.CommunicationArea.DoneHead; // Writeback Done |
| jksoft | 0:dde3f92088d5 | 985 | _controller.CommunicationArea.DoneHead = 0; |
| jksoft | 0:dde3f92088d5 | 986 | LOG("USB_IRQHandler head=%0x\r\r\n",head); |
| jksoft | 0:dde3f92088d5 | 987 | } |
| jksoft | 0:dde3f92088d5 | 988 | LPC_USB->HcInterruptStatus = int_status; |
| jksoft | 0:dde3f92088d5 | 989 | |
| jksoft | 0:dde3f92088d5 | 990 | if (head) |
| jksoft | 0:dde3f92088d5 | 991 | _controller.ProcessDoneQueue(head); // TODO - low bit can be set BUGBUG |
| jksoft | 0:dde3f92088d5 | 992 | LOG("USB_IRQHandler end \r\r\n"); |
| jksoft | 0:dde3f92088d5 | 993 | } |
| jksoft | 0:dde3f92088d5 | 994 | |
| jksoft | 0:dde3f92088d5 | 995 | //==================================================================================== |
| jksoft | 0:dde3f92088d5 | 996 | //==================================================================================== |
| jksoft | 0:dde3f92088d5 | 997 | // API Methods |
| jksoft | 0:dde3f92088d5 | 998 | |
| jksoft | 0:dde3f92088d5 | 999 | void USBInit() |
| jksoft | 0:dde3f92088d5 | 1000 | { |
| jksoft | 0:dde3f92088d5 | 1001 | return _controller.Init(); |
| jksoft | 0:dde3f92088d5 | 1002 | } |
| jksoft | 0:dde3f92088d5 | 1003 | |
| jksoft | 0:dde3f92088d5 | 1004 | void USBLoop() |
| jksoft | 0:dde3f92088d5 | 1005 | { |
| jksoft | 0:dde3f92088d5 | 1006 | return _controller.Loop(); |
| jksoft | 0:dde3f92088d5 | 1007 | } |
| jksoft | 0:dde3f92088d5 | 1008 | |
| jksoft | 0:dde3f92088d5 | 1009 | u8* USBGetBuffer(u32* len) |
| jksoft | 0:dde3f92088d5 | 1010 | { |
| jksoft | 0:dde3f92088d5 | 1011 | *len = USB_RAM_SIZE - sizeof(HostController); |
| jksoft | 0:dde3f92088d5 | 1012 | return _controller.SRAM; |
| jksoft | 0:dde3f92088d5 | 1013 | } |
| jksoft | 0:dde3f92088d5 | 1014 | |
| jksoft | 0:dde3f92088d5 | 1015 | static Setup* GetSetup(int device) |
| jksoft | 0:dde3f92088d5 | 1016 | { |
| jksoft | 0:dde3f92088d5 | 1017 | if (device == 0) |
| jksoft | 0:dde3f92088d5 | 1018 | return &_controller._setupZero; |
| jksoft | 0:dde3f92088d5 | 1019 | |
| jksoft | 0:dde3f92088d5 | 1020 | if (device < 1 || device > MAX_DEVICES) |
| jksoft | 0:dde3f92088d5 | 1021 | return 0; |
| jksoft | 0:dde3f92088d5 | 1022 | return &_controller.Devices[device-1].SetupBuffer; |
| jksoft | 0:dde3f92088d5 | 1023 | } |
| jksoft | 0:dde3f92088d5 | 1024 | |
| jksoft | 0:dde3f92088d5 | 1025 | // Loop until IO on endpoint is complete |
| jksoft | 0:dde3f92088d5 | 1026 | static int WaitIODone(Endpoint* endpoint) |
| jksoft | 0:dde3f92088d5 | 1027 | { |
| jksoft | 0:dde3f92088d5 | 1028 | LOG("WaitIODone start\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1029 | if (endpoint->CurrentState == Endpoint::NotQueued) |
| jksoft | 0:dde3f92088d5 | 1030 | return 0; |
| jksoft | 0:dde3f92088d5 | 1031 | while (endpoint->CurrentState != Endpoint::Idle) |
| jksoft | 0:dde3f92088d5 | 1032 | { |
| jksoft | 0:dde3f92088d5 | 1033 | LOG("WaitIODone goto USBloop endpoint->CurrentState =%d \r\r\n",endpoint->CurrentState); |
| jksoft | 0:dde3f92088d5 | 1034 | USBLoop(); // May generate callbacks, mount or unmount devices etc |
| jksoft | 0:dde3f92088d5 | 1035 | } |
| jksoft | 0:dde3f92088d5 | 1036 | int status = endpoint->Status(); |
| jksoft | 0:dde3f92088d5 | 1037 | |
| jksoft | 0:dde3f92088d5 | 1038 | LOG("WaitIODone end\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1039 | if (status == 0) |
| jksoft | 0:dde3f92088d5 | 1040 | return endpoint->Length; |
| jksoft | 0:dde3f92088d5 | 1041 | return -status; |
| jksoft | 0:dde3f92088d5 | 1042 | } |
| jksoft | 0:dde3f92088d5 | 1043 | |
| jksoft | 0:dde3f92088d5 | 1044 | int USBTransfer(int device, int ep, u8 flags, u8* data, int length, USBCallback callback, void* userData) |
| jksoft | 0:dde3f92088d5 | 1045 | { |
| jksoft | 0:dde3f92088d5 | 1046 | //LOG("USBTRANSFER start\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1047 | Endpoint* endpoint = _controller.GetEndpoint(device,ep); |
| jksoft | 0:dde3f92088d5 | 1048 | if (!endpoint) |
| jksoft | 0:dde3f92088d5 | 1049 | { |
| jksoft | 0:dde3f92088d5 | 1050 | LOG("USBTRANSFER error Endpoint not found!!\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1051 | return ERR_ENDPOINT_NOT_FOUND; |
| jksoft | 0:dde3f92088d5 | 1052 | } |
| jksoft | 0:dde3f92088d5 | 1053 | |
| jksoft | 0:dde3f92088d5 | 1054 | //LOG("USBTRANSFER run01\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1055 | WaitIODone(endpoint); |
| jksoft | 0:dde3f92088d5 | 1056 | endpoint->Flags = flags; |
| jksoft | 0:dde3f92088d5 | 1057 | endpoint->Data = data; |
| jksoft | 0:dde3f92088d5 | 1058 | endpoint->Length = length; |
| jksoft | 0:dde3f92088d5 | 1059 | endpoint->Callback = callback; |
| jksoft | 0:dde3f92088d5 | 1060 | endpoint->UserData = userData; |
| jksoft | 0:dde3f92088d5 | 1061 | //LOG("USBTRANSFER run02\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1062 | if (ep == 0) |
| jksoft | 0:dde3f92088d5 | 1063 | { |
| jksoft | 0:dde3f92088d5 | 1064 | LOG("USBTRANSFER ep == 0(Setup) ------------------------------\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1065 | _controller.Transfer(endpoint,TOKEN_SETUP,(u8*)GetSetup(device),8,Endpoint::SetupQueued); |
| jksoft | 0:dde3f92088d5 | 1066 | } |
| jksoft | 0:dde3f92088d5 | 1067 | else |
| jksoft | 0:dde3f92088d5 | 1068 | { |
| jksoft | 0:dde3f92088d5 | 1069 | LOG("USBTRANSFER ep != 0\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1070 | _controller.Transfer(endpoint,flags & 0x80 ? TOKEN_IN : TOKEN_OUT,data,length,Endpoint::DataQueued); |
| jksoft | 0:dde3f92088d5 | 1071 | } |
| jksoft | 0:dde3f92088d5 | 1072 | if (callback) |
| jksoft | 0:dde3f92088d5 | 1073 | { |
| jksoft | 0:dde3f92088d5 | 1074 | LOG("USBTRANSFER end io_pending\r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1075 | return IO_PENDING; |
| jksoft | 0:dde3f92088d5 | 1076 | } |
| jksoft | 0:dde3f92088d5 | 1077 | LOG("USBTRANSFER end wait io done \r\r\n"); |
| jksoft | 0:dde3f92088d5 | 1078 | return WaitIODone(endpoint); |
| jksoft | 0:dde3f92088d5 | 1079 | } |
| jksoft | 0:dde3f92088d5 | 1080 | |
| jksoft | 0:dde3f92088d5 | 1081 | int USBControlTransfer(int device, int request_type, int request, int value, int index, u8* data, int length, USBCallback callback, void * userData) |
| jksoft | 0:dde3f92088d5 | 1082 | { |
| jksoft | 0:dde3f92088d5 | 1083 | Setup* setup = GetSetup(device); |
| jksoft | 0:dde3f92088d5 | 1084 | if (!setup) |
| jksoft | 0:dde3f92088d5 | 1085 | return ERR_DEVICE_NOT_FOUND; |
| jksoft | 0:dde3f92088d5 | 1086 | |
| jksoft | 0:dde3f92088d5 | 1087 | // Async control calls may overwrite setup buffer of previous call, so we need to wait before setting up next call |
| jksoft | 0:dde3f92088d5 | 1088 | WaitIODone(_controller.GetEndpoint(device,0)); |
| jksoft | 0:dde3f92088d5 | 1089 | |
| jksoft | 0:dde3f92088d5 | 1090 | setup->bm_request_type = request_type; |
| jksoft | 0:dde3f92088d5 | 1091 | setup->b_request = request; |
| jksoft | 0:dde3f92088d5 | 1092 | setup->w_value = value; |
| jksoft | 0:dde3f92088d5 | 1093 | setup->w_index = index; |
| jksoft | 0:dde3f92088d5 | 1094 | setup->w_length = length; |
| jksoft | 0:dde3f92088d5 | 1095 | LOG("USBControlTransfer(device=%d,reqtype=%d,req=%d,value=%d,index=%d,data=%p,len=%d,callbak=%p,udata=%p)\r\r\n", |
| jksoft | 0:dde3f92088d5 | 1096 | device,request_type,request,value,index,data,length,callback,userData); |
| jksoft | 0:dde3f92088d5 | 1097 | return USBTransfer(device,0,request_type & DEVICE_TO_HOST,data,length,callback,userData); |
| jksoft | 0:dde3f92088d5 | 1098 | } |
| jksoft | 0:dde3f92088d5 | 1099 | |
| jksoft | 0:dde3f92088d5 | 1100 | int USBInterruptTransfer(int device, int ep, u8* data, int length, USBCallback callback, void* userData) |
| jksoft | 0:dde3f92088d5 | 1101 | { |
| jksoft | 0:dde3f92088d5 | 1102 | return USBTransfer(device,ep,(ep & 0x80) | ENDPOINT_INTERRUPT,data,length,callback,userData); |
| jksoft | 0:dde3f92088d5 | 1103 | } |
| jksoft | 0:dde3f92088d5 | 1104 | |
| jksoft | 0:dde3f92088d5 | 1105 | int USBBulkTransfer(int device, int ep, u8* data, int length, USBCallback callback, void* userData) |
| jksoft | 0:dde3f92088d5 | 1106 | { |
| jksoft | 0:dde3f92088d5 | 1107 | return USBTransfer(device,ep,(ep & 0x80) | ENDPOINT_BULK,data,length,callback,userData); |
| jksoft | 0:dde3f92088d5 | 1108 | } |
| jksoft | 0:dde3f92088d5 | 1109 | |
| jksoft | 0:dde3f92088d5 | 1110 | int GetDescriptor(int device, int descType,int descIndex, u8* data, int length) |
| jksoft | 0:dde3f92088d5 | 1111 | { |
| jksoft | 0:dde3f92088d5 | 1112 | return USBControlTransfer(device,DEVICE_TO_HOST | RECIPIENT_DEVICE, GET_DESCRIPTOR,(descType << 8)|(descIndex), 0, data, length, 0); |
| jksoft | 0:dde3f92088d5 | 1113 | } |
| jksoft | 0:dde3f92088d5 | 1114 | |
| jksoft | 0:dde3f92088d5 | 1115 | int GetString(int device, int index, char* dst, int length) |
| jksoft | 0:dde3f92088d5 | 1116 | { |
| jksoft | 0:dde3f92088d5 | 1117 | u8 buffer[255]; |
| jksoft | 0:dde3f92088d5 | 1118 | int le = GetDescriptor(device,DESCRIPTOR_TYPE_STRING,index,buffer,sizeof(buffer)); |
| jksoft | 0:dde3f92088d5 | 1119 | if (le < 0) |
| jksoft | 0:dde3f92088d5 | 1120 | return le; |
| jksoft | 0:dde3f92088d5 | 1121 | if (length < 1) |
| jksoft | 0:dde3f92088d5 | 1122 | return -1; |
| jksoft | 0:dde3f92088d5 | 1123 | length <<= 1; |
| jksoft | 0:dde3f92088d5 | 1124 | if (le > length) |
| jksoft | 0:dde3f92088d5 | 1125 | le = length; |
| jksoft | 0:dde3f92088d5 | 1126 | for (int j = 2; j < le; j += 2) |
| jksoft | 0:dde3f92088d5 | 1127 | *dst++ = buffer[j]; |
| jksoft | 0:dde3f92088d5 | 1128 | *dst = 0; |
| jksoft | 0:dde3f92088d5 | 1129 | return (le>>1)-1; |
| jksoft | 0:dde3f92088d5 | 1130 | } |
| jksoft | 0:dde3f92088d5 | 1131 | |
| jksoft | 0:dde3f92088d5 | 1132 | int SetAddress(int device, int new_addr) |
| jksoft | 0:dde3f92088d5 | 1133 | { |
| jksoft | 0:dde3f92088d5 | 1134 | return USBControlTransfer(device,HOST_TO_DEVICE | RECIPIENT_DEVICE, SET_ADDRESS, new_addr, 0, 0, 0, 0); |
| jksoft | 0:dde3f92088d5 | 1135 | } |
| jksoft | 0:dde3f92088d5 | 1136 | |
| jksoft | 0:dde3f92088d5 | 1137 | int SetConfiguration(int device, int configNum) |
| jksoft | 0:dde3f92088d5 | 1138 | { |
| jksoft | 0:dde3f92088d5 | 1139 | return USBControlTransfer(device,HOST_TO_DEVICE | RECIPIENT_DEVICE, SET_CONFIGURATION, configNum, 0, 0, 0, 0); |
| jksoft | 0:dde3f92088d5 | 1140 | } |
| jksoft | 0:dde3f92088d5 | 1141 | |
| jksoft | 0:dde3f92088d5 | 1142 | int SetInterface(int device, int ifNum, int altNum) |
| jksoft | 0:dde3f92088d5 | 1143 | { |
| jksoft | 0:dde3f92088d5 | 1144 | return USBControlTransfer(device,HOST_TO_DEVICE | RECIPIENT_INTERFACE, SET_INTERFACE, altNum, ifNum, 0, 0, 0); |
| jksoft | 0:dde3f92088d5 | 1145 | } |
| jksoft | 0:dde3f92088d5 | 1146 | |
| jksoft | 0:dde3f92088d5 | 1147 | // HUB stuff |
| jksoft | 0:dde3f92088d5 | 1148 | int SetPortFeature(int device, int feature, int index) |
| jksoft | 0:dde3f92088d5 | 1149 | { |
| jksoft | 0:dde3f92088d5 | 1150 | return USBControlTransfer(device,HOST_TO_DEVICE | REQUEST_TYPE_CLASS | RECIPIENT_OTHER,SET_FEATURE,feature,index,0,0); |
| jksoft | 0:dde3f92088d5 | 1151 | } |
| jksoft | 0:dde3f92088d5 | 1152 | |
| jksoft | 0:dde3f92088d5 | 1153 | int ClearPortFeature(int device, int feature, int index) |
| jksoft | 0:dde3f92088d5 | 1154 | { |
| jksoft | 0:dde3f92088d5 | 1155 | return USBControlTransfer(device,HOST_TO_DEVICE | REQUEST_TYPE_CLASS | RECIPIENT_OTHER,CLEAR_FEATURE,feature,index,0,0); |
| jksoft | 0:dde3f92088d5 | 1156 | } |
| jksoft | 0:dde3f92088d5 | 1157 | |
| jksoft | 0:dde3f92088d5 | 1158 | int SetPortPower(int device, int port) |
| jksoft | 0:dde3f92088d5 | 1159 | { |
| jksoft | 0:dde3f92088d5 | 1160 | int r = SetPortFeature(device,PORT_POWER,port); |
| jksoft | 0:dde3f92088d5 | 1161 | _controller.DelayMS(20); // 80ms to turn on a hubs power... DESCRIPTOR? todo |
| jksoft | 0:dde3f92088d5 | 1162 | return r; |
| jksoft | 0:dde3f92088d5 | 1163 | } |
| jksoft | 0:dde3f92088d5 | 1164 | |
| jksoft | 0:dde3f92088d5 | 1165 | int SetPortReset(int device, int port) |
| jksoft | 0:dde3f92088d5 | 1166 | { |
| jksoft | 0:dde3f92088d5 | 1167 | return SetPortFeature(device,PORT_RESET,port); |
| jksoft | 0:dde3f92088d5 | 1168 | } |
| jksoft | 0:dde3f92088d5 | 1169 | |
| jksoft | 0:dde3f92088d5 | 1170 | int GetPortStatus(int device, int port, u32* status) |
| jksoft | 0:dde3f92088d5 | 1171 | { |
| jksoft | 0:dde3f92088d5 | 1172 | return USBControlTransfer(device,DEVICE_TO_HOST | REQUEST_TYPE_CLASS | RECIPIENT_OTHER,GET_STATUS,0,port,(u8*)status,4); |
| jksoft | 0:dde3f92088d5 | 1173 | } |
| jksoft | 0:dde3f92088d5 | 1174 | |
| jksoft | 0:dde3f92088d5 | 1175 | #endif |