Diff: AVR910.h

Revision:

4:ceee1eb7062e

Parent:

3:df6782d01720

--- a/AVR910.h	Sat Jan 31 21:54:05 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,218 +0,0 @@
-/**
- * @author Aaron Berk
- *
- * @section LICENSE
- *
- * Copyright (c) 2010 Aaron Berk
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * @section DESCRIPTION
- *
- * Program AVR chips with the AVR910 ISP (in-system programming) protocol,
- * using an mbed.
- *
- * AVR910 Application Note:
- *
- * http://www.atmel.com/dyn/resources/prod_documents/doc0943.pdf
- */
-
-#ifndef MBED_AVR910_H
-#define MBED_AVR910_H
-
-/**
- * Includes
- */
-#include "mbed.h"
-
-/**
- * Defines
- */
-
-#define PATH_TO_BINARY "local/T.bin"
-
-//Commands
-#define ATMEL_VENDOR_CODE     0x1E
-#define DEVICE_LOCKED         0x00
-#define WRITE_HIGH_BYTE       0x48
-#define WRITE_LOW_BYTE        0x40
-#define READ_HIGH_BYTE        0x28
-#define READ_LOW_BYTE         0x20
-#define WRITE_HIGH_FLASH_BYTE 0x68
-#define WRITE_LOW_FLASH_BYTE  0x60
-
-#define PAGE_SIZE         ATMEGA328P_PAGESIZE
-#define NUM_PAGES         ATMEGA328P_NUM_PAGES
-
-//ATMega328P
-#define ATMEGA328P_PAGESIZE  64 //Size in words.
-#define ATMEGA328P_NUM_PAGES 256
-
-/**
- * AVR910 ISP
- */
-class AVR910 {
-
-public:
-
-    /**
-     * Constructor.
-     *
-     * @param mosi mbed pin for MOSI SPI line.
-     * @param miso mbed pin for MISO SPI line.
-     * @param sclk mbed pin for SCLK SPI line.
-     * @param nReset mbed pin for not reset line on the ISP interface.
-     *
-     * Sends an enable programming command, allowing device registers to be
-     * read and commands sent.
-     */
-    AVR910(PinName mosi, PinName miso, PinName sclk, PinName nReset);
-
-    /**
-     * Program the AVR microcontroller connected to the mbed.
-     *
-     * Sends a chip erase command followed by writing the binary to the AVR
-     * page buffer and writing the page buffer to flash memory whenever it is
-     * full.
-     *
-     * @param binary File pointer to the binary file to be loaded onto the
-     *               AVR microcontroller.
-     * @param pageSize The size of one page on the device in words. If the
-     *                 device does not use paged memory, set this as the size
-     *                 of memory of the device in words.
-     * @param numPages The number of pages on the device. If the device does
-     *                 not use paged memory, set this to 1 (default).
-     *
-     * @return  0 => AVR microcontroller programmed successfully.
-     *         -1 => Problem during programming.
-     */
-    int program(FILE* binary, int pageSize, int numPages = 1);
-    int programData(char* myData, int fileSize, int pageSize, int numPages = 1);
-
-    /**
-     * Set the frequency of the SPI communication.
-     *
-     * (Wrapper for SPI::frequency)
-     *
-     * @param frequency Frequency of the SPI communication in hertz.
-     */
-    void setFrequency(int frequency);
-
-    /**
-     * Read the vendor code of the device.
-     *
-     * @return The vendor code - should be 0x1E for Atmel.
-     *         0x00 -> Device is locked.
-     */
-    int readVendorCode(void);
-
-    /**
-     * Read the part family and flash size of the device.
-     *
-     * @return Code indicating the family of AVR microcontrollers the device comes
-     *         from and how much flash memory it contains.
-     *         0xFF -> Device code erased or target missing.
-     *         0x01 -> Device is locked.
-     */
-    int readPartFamilyAndFlashSize(void);
-
-    /**
-     * Read the part number.
-     *
-     * @return Code identifying the part number.
-     *         0xFF -> Device code erased or target missing.
-     *         0x02 -> Device is locked.
-     */
-    int readPartNumber(void);
-
-private:
-
-    /**
-     * Issue an enable programming command to the AVR microcontroller.
-     *
-     * @param  0 to indicate programming was enabled successfully.
-     *        -1 to indicate programming was not enabled.
-     */
-    int enableProgramming(void);
-
-    /**
-     * Poll the device until it has finished its current operation.
-     */
-    void poll(void);
-
-    /**
-     * Issue a chip erase command to the AVR microcontroller.
-     */
-    void chipErase(void);
-
-    /**
-     * Load a byte into the memory page buffer.
-     *
-     * @param highLow Indicate whether the byte being loaded is a high or low
-     *                byte.
-     * @param data The data byte to load.
-     */
-    void loadMemoryPage(int highLow, char address, char data);
-
-    /**
-     * Write a byte into the flash memory.
-     *
-     * @param highLow Indicate whether the byte being loaded is a high or low
-     *                byte.
-     * @param address The address to load the byte at.
-     * @param data The data byte to load.
-     */
-    void writeFlashMemoryByte(int highLow, int address, char data);
-
-    /**
-     * Write the memory page buffer to flash memory.
-     *
-     * @param pageNumber The page number to write to in flash memory.
-     */
-    void writeFlashMemoryPage(char pageNumber);
-
-    /**
-     * Read a byte from program memory.
-     *
-     * @param highLow Indicate whether the byte being read is a low or high byte.
-     * @param pageNumber The page number to read from.
-     * @param pageOffset Address of byte in the page.
-     *
-     * @return The byte at the specified memory location.
-     */
-    char readProgramMemory(int highLow, char pageNumber, char pageOffset);
-
-    /**
-     * Check the binary has been written correctly.
-     *
-     * @param numPages The number of pages written to the AVR microcontroller.
-     * @param binary File pointer to the binary used.
-     *
-     * @return  0 -> No inconsistencies between binary file and AVR flash memory.
-     *         -1 -> Binary file was not written correctly.
-     */
-    int checkMemory(int numPages, FILE* binary);
-    int checkMemoryData(int numPages, char* myData, int fileSize);
-
-    SPI        spi_;
-    DigitalOut nReset_;
-
-};
-
-#endif /* AVR910_H */