20210203

Dependencies:   mbed FastPWM

main.cpp

Committer:
Lightvalve
Date:
2020-09-14
Revision:
120:17398540bb1c
Parent:
119:8ade52d4bb25
Child:
121:89396c37b03e

File content as of revision 120:17398540bb1c:

//200914-4
#include "mbed.h"
#include "FastPWM.h"
#include "INIT_HW.h"
#include "function_CAN.h"
#include "SPI_EEP_ENC.h"
#include "I2C_AS5510.h"
#include "setting.h"
#include "function_utilities.h"
#include "stm32f4xx_flash.h"
#include "FlashWriter.h"      

using namespace std;
Timer t;

///191008////

// dac & check ///////////////////////////////////////////
DigitalOut check(PC_2);
DigitalOut check_2(PC_3);
AnalogOut dac_1(PA_4);
AnalogOut dac_2(PA_5);
AnalogIn adc1(PC_4); //pressure_1
AnalogIn adc2(PB_0); //pressure_2
AnalogIn adc3(PC_1); //current


// PWM ///////////////////////////////////////////
float dtc_v=0.0f;
float dtc_w=0.0f;

// I2C ///////////////////////////////////////////
I2C i2c(PC_9,PA_8); // SDA, SCL (for K22F)
const int i2c_slave_addr1 =  0x56;
unsigned int value; // 10bit output of reading sensor AS5510

// SPI ///////////////////////////////////////////
//SPI eeprom(PB_15, PB_14, PB_13); // EEPROM //(SPI_MOSI, SPI_MISO, SPI_SCK);
//DigitalOut eeprom_cs(PB_12);
//FlashWriter writer(6);//2부터 7까지 되는듯 아마 sector
SPI enc(PC_12,PC_11,PC_10);
DigitalOut enc_cs(PD_2);
DigitalOut LED(PA_15);

// UART ///////////////////////////////////////////
Serial pc(PA_9,PA_10); //  _ UART

// CAN ///////////////////////////////////////////
CAN can(PB_8, PB_9, 1000000);
CANMessage msg;
void onMsgReceived()
{
    CAN_RX_HANDLER();
}

// Variables ///////////////////////////////////////////
State pos;
State vel;
State Vout;
State torq;
State pres_A;
State pres_B;
State cur;
State valve_pos;

State INIT_Vout;
State INIT_Valve_Pos;
State INIT_Pos;
State INIT_torq;

extern int CID_RX_CMD;
extern int CID_RX_REF_POSITION;
extern int CID_RX_REF_VALVE_POS;
extern int CID_RX_REF_PWM;

extern int CID_TX_INFO;
extern int CID_TX_POSITION;
extern int CID_TX_TORQUE;
extern int CID_TX_PRES;
extern int CID_TX_VOUT;
extern int CID_TX_VALVE_POSITION;




// =============================================================================
// =============================================================================
// =============================================================================

/*******************************************************************************
 *  REFERENCE MODE
 ******************************************************************************/
enum _REFERENCE_MODE {
    MODE_REF_NO_ACT = 0,                                //0
    MODE_REF_DIRECT,                                //1
    MODE_REF_COS_INC,                                  //2
    MODE_REF_LINE_INC,                                 //3
    MODE_REF_SIN_WAVE,                                  //4
    MODE_REF_SQUARE_WAVE,                                  //5
};

/*******************************************************************************
 *  CONTROL MODE
 ******************************************************************************/
enum _CONTROL_MODE {
    //control mode
    MODE_NO_ACT = 0,                                    //0
    MODE_VALVE_POSITION_CONTROL,                        //1
    MODE_JOINT_CONTROL,                                 //2

    MODE_VALVE_OPEN_LOOP,                               //3
    MODE_JOINT_POSITION_TORQUE_CONTROL_VALVE_POSITION,  //4
    MODE_VALVE_POSITION_TORQUE_CONTROL_LEARNING,        //5

    MODE_JOINT_POSITION_PRES_CONTROL_PWM,               //6
    MODE_JOINT_POSITION_PRES_CONTROL_VALVE_POSITION,    //7
    MODE_VALVE_POSITION_PRES_CONTROL_LEARNING,          //8

    MODE_TEST_CURRENT_CONTROL,                          //9
    MODE_TEST_PWM_CONTROL,                              //10

    MODE_CURRENT_CONTROL,                               //11
    MODE_JOINT_POSITION_TORQUE_CONTROL_CURRENT,         //12
    MODE_JOINT_POSITION_PRES_CONTROL_CURRENT,           //13

    //utility
    MODE_TORQUE_SENSOR_NULLING = 20,                    //20
    MODE_VALVE_NULLING_AND_DEADZONE_SETTING,            //21
    MODE_FIND_HOME,                                     //22
    MODE_VALVE_GAIN_SETTING,                            //23
    MODE_PRESSURE_SENSOR_NULLING,                       //24
    MODE_PRESSURE_SENSOR_CALIB,                         //25
    MODE_ROTARY_FRICTION_TUNING,                        //26

    MODE_DDV_POS_VS_PWM_ID = 30,                           //30
    MODE_DDV_DEADZONE_AND_CENTER,                       //31
    MODE_DDV_POS_VS_FLOWRATE,                           //32
    MODE_SYSTEM_ID,                                     //33
};

void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Configure the main internal regulator output voltage 
  */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
  /** Initializes the CPU, AHB and APB busses clocks 
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
  RCC_OscInitStruct.PLL.PLLM = 8;//8
  RCC_OscInitStruct.PLL.PLLN = 180; //180
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 2;
  RCC_OscInitStruct.PLL.PLLR = 2;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    //Error_Handler();
  }
  /** Activate the Over-Drive mode 
  */
  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
  {
    //Error_Handler();
  }
  /** Initializes the CPU, AHB and APB busses clocks 
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
  {
    //Error_Handler();
  }
}

float u_past[num_array_u_past] = {0.0f};
float x_past[num_array_x_past] = {0.0f};
float x_future[num_array_x_future] = {0.0f};
float f_past[num_array_f_past] = {0.0f};
float f_future[num_array_f_future] = {0.0f};

float input_NN[num_input] = { 0.0f };

const float h1[num_input][16] = { 
   {-0.12538549304008484f,-0.1297602355480194f,0.11304140090942383f,0.2742859721183777f,-0.8250300288200378f,-0.04229236766695976f,-0.15306922793388367f,-0.4135235548019409f,-0.2961782217025757f,-0.07852207124233246f,-1.1915283203125f,0.01317680161446333f,-0.25207650661468506f,-0.014075362123548985f,-0.22528137266635895f,-0.6198574304580688f},
{-0.19888468086719513f,0.4962921142578125f,-0.3440950810909271f,-0.04722340777516365f,-0.9384036064147949f,0.008911640383303165f,-0.3551466166973114f,-0.5058884024620056f,-0.11596696078777313f,0.14010098576545715f,-1.1150455474853516f,-0.7881326079368591f,0.21576932072639465f,-0.6239233016967773f,-0.1836855560541153f,-0.5878320336341858f},
{-0.03559984266757965f,0.06665316969156265f,0.3188004493713379f,-0.23797664046287537f,-0.8946518898010254f,0.33254438638687134f,0.2516096830368042f,-0.4437709152698517f,-0.18694481253623962f,0.14209488034248352f,-0.7290050387382507f,-0.47835156321525574f,0.0697505995631218f,0.009985013864934444f,0.04897245764732361f,-0.5600040555000305f},
{-0.06218857690691948f,0.0055004083551466465f,0.34815579652786255f,0.3614911139011383f,-0.9616373777389526f,0.4737781584262848f,-0.10148510336875916f,-0.19577272236347198f,-0.02599596232175827f,0.25770917534828186f,0.10352985560894012f,-0.025867044925689697f,-0.09092411398887634f,0.37447765469551086f,-0.2594349980354309f,-0.29302236437797546f},
{-1.0256245136260986f,3.3244986534118652f,-0.004507303237915039f,-0.4295147955417633f,-0.2665431797504425f,1.2085310220718384f,0.11336228251457214f,0.5614469647407532f,-0.020764315500855446f,0.09357579052448273f,2.153151750564575f,-2.3825974464416504f,-0.19526953995227814f,1.485861897468567f,-0.33859342336654663f,-1.0096709728240967f},
{0.33760398626327515f,0.15137788653373718f,0.19074231386184692f,0.28160399198532104f,0.06776947528123856f,0.15706767141819f,0.1446705460548401f,-0.59229576587677f,-0.01898665726184845f,0.09772954136133194f,-0.2321673035621643f,-0.43289390206336975f,-0.22538399696350098f,0.2040676772594452f,-0.36205175518989563f,-0.5129569172859192f},
{0.0647188276052475f,0.385019987821579f,-0.21918344497680664f,-0.3794626295566559f,-0.4691496193408966f,0.5222136974334717f,0.05268651247024536f,-0.654662549495697f,0.2718934714794159f,0.053434062749147415f,0.024371149018406868f,-0.27870720624923706f,-0.1430879831314087f,0.2003219723701477f,-0.13682329654693604f,-0.31295764446258545f},
{0.04983292520046234f,0.1452646702528f,-0.23319895565509796f,0.12819106876850128f,-0.46857011318206787f,0.32018986344337463f,-0.15703755617141724f,-0.6967725157737732f,-0.023273874074220657f,0.0937250480055809f,-0.04469524696469307f,-0.625782310962677f,0.33592408895492554f,-0.06288835406303406f,0.03769642114639282f,-0.12413319200277328f},
{0.22675682604312897f,0.5973165035247803f,0.08977723121643066f,-0.2428070604801178f,-0.3495730757713318f,0.6904239058494568f,-0.06348633766174316f,-0.7936407327651978f,-0.2829691469669342f,0.2962890565395355f,-0.49142125248908997f,-0.2163258045911789f,0.2159746140241623f,-0.12937478721141815f,-0.2676756680011749f,-0.09756138920783997f},
{0.056595273315906525f,0.04809652268886566f,0.16173982620239258f,0.020012572407722473f,-0.09903427213430405f,0.9706398844718933f,-0.26198261976242065f,-0.5410996675491333f,-0.05274199694395065f,-0.42306792736053467f,-0.33324792981147766f,-0.8957317471504211f,0.3466741442680359f,-0.6731507182121277f,0.3052974343299866f,-0.2763424217700958f},
{0.5586411952972412f,0.43095552921295166f,0.32573211193084717f,0.4262547492980957f,-0.23946885764598846f,0.853289008140564f,-0.17817988991737366f,-0.5030534267425537f,-0.41963163018226624f,0.01310235820710659f,-0.10254285484552383f,-0.6943825483322144f,-0.03343270346522331f,-0.5341449975967407f,0.23379981517791748f,-0.5737422108650208f},
{-0.43968984484672546f,-0.5982950925827026f,-0.3532183766365051f,-0.09305038303136826f,0.02779853157699108f,-0.31271958351135254f,0.13436567783355713f,0.3002631366252899f,-0.1767670065164566f,0.16469384729862213f,-0.5442917943000793f,-0.09487488865852356f,0.10150864720344543f,-0.1174691766500473f,0.09193113446235657f,-0.398308128118515f},
{-0.29969802498817444f,-0.20802512764930725f,0.173875629901886f,-0.03646260127425194f,0.2339116930961609f,-0.025851814076304436f,-0.21062730252742767f,0.1728522628545761f,-0.1958557665348053f,-0.19184263050556183f,-0.16906322538852692f,-0.3767596185207367f,0.03815969452261925f,-0.034190502017736435f,-0.19507692754268646f,-0.6954120993614197f},
{-0.5445505380630493f,-0.06667868793010712f,0.36161231994628906f,-0.3853375017642975f,-0.18679115176200867f,-0.17434139549732208f,-0.2803434431552887f,-0.1055828109383583f,-0.1492249220609665f,-0.22327004373073578f,-0.096988745033741f,-0.4720779061317444f,-0.33747512102127075f,-0.01742616668343544f,0.04202204942703247f,-0.3880178928375244f},
{-0.30601173639297485f,0.6010074019432068f,0.1776806116104126f,-0.3648182153701782f,0.37388876080513f,-0.3927247226238251f,0.036818891763687134f,0.47357508540153503f,0.2354845255613327f,0.042778871953487396f,0.21399913728237152f,-1.0210378170013428f,0.033867064863443375f,0.33429262042045593f,0.058527231216430664f,-0.4199855625629425f},
{-0.34438514709472656f,2.2698769569396973f,-0.3542669713497162f,-0.528469979763031f,-0.13626305758953094f,-2.7937612533569336f,-0.13638360798358917f,0.16776393353939056f,0.1462515890598297f,-0.03840259462594986f,1.0126919746398926f,-1.1838299036026f,-0.24433782696723938f,2.422633171081543f,-0.07223698496818542f,-0.3419298827648163f},
{0.6194776892662048f,-2.516664743423462f,0.14635330438613892f,0.9439404606819153f,-0.4982180595397949f,2.151139259338379f,-0.03628063201904297f,-1.0738998651504517f,-0.08571594953536987f,0.0396052785217762f,-2.8291807174682617f,1.5088356733322144f,0.20211462676525116f,-2.522641181945801f,0.25779521465301514f,-0.026165809482336044f},
{0.06352996081113815f,-0.05066967010498047f,0.18322283029556274f,0.03522790968418121f,-0.4696357548236847f,0.25518545508384705f,-0.3163079023361206f,-0.27377328276634216f,-0.3872103691101074f,-0.14478269219398499f,-0.6481943726539612f,0.3252601623535156f,0.25736236572265625f,-0.651495099067688f,-0.2407861351966858f,0.20217441022396088f},
{-0.2707156240940094f,-0.923464834690094f,-0.2609631419181824f,0.26111695170402527f,0.2789458930492401f,-0.7849046587944031f,0.2401489019393921f,-0.3799836337566376f,-0.38324639201164246f,-0.012600225396454334f,-0.6569547653198242f,0.7391843199729919f,0.07483898103237152f,0.7388472557067871f,-0.28592410683631897f,-0.06940817087888718f},
{0.14886534214019775f,-1.379183292388916f,0.1335710883140564f,-0.2705114483833313f,-0.1318787783384323f,-1.0396175384521484f,-0.1246849000453949f,-0.2070637196302414f,-0.1831875741481781f,0.0033268898259848356f,-0.176667258143425f,1.1407310962677002f,0.18566201627254486f,1.2869547605514526f,0.1255095899105072f,0.5903193950653076f},
{-0.46475258469581604f,-1.7666163444519043f,-0.07108169794082642f,0.0038260819856077433f,-0.08281804621219635f,-1.5454415082931519f,0.13563674688339233f,0.305400013923645f,-0.3685535192489624f,-0.30845415592193604f,-0.4078262448310852f,0.7521111965179443f,-0.22504742443561554f,1.6817525625228882f,0.01829466223716736f,0.7402373552322388f},
{-0.5450851917266846f,-1.325493335723877f,0.24740570783615112f,-0.5695751309394836f,0.3641650676727295f,-1.0611701011657715f,0.25593245029449463f,0.29514080286026f,-0.09460391849279404f,0.05305565521121025f,0.11546958982944489f,0.6832703351974487f,0.14349237084388733f,1.1527934074401855f,0.056514471769332886f,0.6130792498588562f},
{-0.07460365444421768f,-0.3792673945426941f,-0.3288555443286896f,-0.2455163151025772f,-0.24700762331485748f,-0.4440239369869232f,-0.11800059676170349f,0.14122913777828217f,-0.29557308554649353f,0.2819157540798187f,0.260654479265213f,0.4827042520046234f,-0.06022251769900322f,0.44099026918411255f,-0.3194865584373474f,0.6340256929397583f},
{-0.1879761815071106f,-0.2528689503669739f,-0.29844698309898376f,-0.5101702809333801f,0.339926540851593f,0.3075282871723175f,-0.249517560005188f,0.331373929977417f,-0.4385988116264343f,0.16865456104278564f,0.20783667266368866f,-0.0021506110206246376f,0.23602595925331116f,0.34091079235076904f,0.23831695318222046f,0.06740475445985794f},
{-0.025915497913956642f,-0.1714746356010437f,0.20589900016784668f,-0.04402639716863632f,0.10800769180059433f,-0.639302134513855f,-0.2483310103416443f,0.1761297583580017f,-0.16761073470115662f,0.28876426815986633f,-0.0992262214422226f,-0.07243049889802933f,-0.3015822470188141f,-0.017708564177155495f,0.06927120685577393f,-0.09717927873134613f},
{-0.429812490940094f,0.1543487310409546f,0.008588135242462158f,-0.5760452151298523f,-0.2914566993713379f,-0.2223208248615265f,0.013287186622619629f,-0.08880852162837982f,0.1582227200269699f,-0.024031326174736023f,0.3269001841545105f,-0.5358487367630005f,-0.009665273129940033f,-0.29968416690826416f,-0.1702093929052353f,-0.03628617152571678f},
{-0.34342706203460693f,-0.039361659437417984f,0.06708025932312012f,-0.05964343994855881f,0.043768007308244705f,-0.27679672837257385f,0.27470332384109497f,-0.0833902433514595f,-0.11639530956745148f,0.2393946647644043f,0.49262282252311707f,-0.8204572796821594f,0.01190573163330555f,0.30590832233428955f,0.11447501182556152f,-0.21693718433380127f},
};

const float h2[16][16] = { 
    {-0.40168216824531555f,0.5186493396759033f,-0.06966331601142883f,-0.9802365303039551f,-0.21907491981983185f,0.6322985291481018f,0.09174512326717377f,0.0904630720615387f,-0.43008196353912354f,-0.1415480375289917f,-0.3015476167201996f,0.15160076320171356f,0.12968102097511292f,0.321427583694458f,0.3973703384399414f,0.7016607522964478f},
{-0.17964878678321838f,-19.759550094604492f,0.057057321071624756f,0.14957964420318604f,-0.35503754019737244f,-18.96450424194336f,-0.6501030325889587f,-0.2990124225616455f,-0.33757925033569336f,0.2895788848400116f,-1.3818602561950684f,-7.4136576652526855f,0.33698758482933044f,-1.7448585033416748f,-2.7991631031036377f,-10.538856506347656f},
{-0.22745239734649658f,0.003037691116333008f,-0.061119019985198975f,0.35696902871131897f,0.05568113923072815f,0.011741191148757935f,-0.20225946605205536f,-0.08465918898582458f,0.3489862382411957f,0.0687277615070343f,0.31964078545570374f,0.3004753887653351f,0.36063823103904724f,-0.42892736196517944f,0.08652284741401672f,0.027493387460708618f},
{-0.23776614665985107f,0.20758849382400513f,-0.2894435524940491f,0.21407021582126617f,0.08946844935417175f,-0.8848502039909363f,-0.3794410824775696f,0.4122363030910492f,0.26211628317832947f,0.2953031361103058f,0.11218374967575073f,0.07981710880994797f,-0.404754102230072f,0.6458055973052979f,0.37363240122795105f,-0.5949528217315674f},
{-0.4611620008945465f,0.4566289186477661f,-0.25313520431518555f,0.27121683955192566f,0.036378175020217896f,0.12893712520599365f,-0.19370491802692413f,-0.08570799231529236f,-0.024399548768997192f,-0.39465832710266113f,-0.2024049311876297f,-0.5216248035430908f,0.10077962279319763f,-0.422469824552536f,-0.2906075417995453f,-0.42898765206336975f},
{0.08551257848739624f,-0.8909131288528442f,-0.3519742488861084f,0.2551344633102417f,-0.3015052080154419f,1.128373384475708f,-0.6188379526138306f,-0.019414573907852173f,-0.23047015070915222f,0.3579089343547821f,-0.31142207980155945f,-0.8247268795967102f,-0.20959392189979553f,0.9023554921150208f,0.3796950578689575f,-2.667577028274536f},
{-0.1828227937221527f,-0.02554568648338318f,-0.3260969817638397f,0.08422836661338806f,-0.38453540205955505f,-0.25432005524635315f,0.285016268491745f,0.12387624382972717f,-0.0982072651386261f,0.13111665844917297f,-0.03692615032196045f,-0.32796353101730347f,-0.21546880900859833f,0.049302369356155396f,-0.27088475227355957f,-0.4124959409236908f},
{-0.06052946671843529f,0.42518696188926697f,0.33083590865135193f,-0.3584161102771759f,-0.14358049631118774f,-0.3736359179019928f,-0.21919091045856476f,-0.3003333508968353f,0.2600560486316681f,-0.37898191809654236f,0.38830283284187317f,-0.7548213005065918f,-0.31673234701156616f,-0.31882062554359436f,0.2643463909626007f,-0.020919619128108025f},
{-0.25820738077163696f,0.30604642629623413f,-0.11379697918891907f,0.1305476427078247f,0.041274964809417725f,-0.2976079285144806f,-0.10284432768821716f,0.0019084513187408447f,0.06103590130805969f,-0.38046833872795105f,0.011476963758468628f,-0.3197441101074219f,-0.37024784088134766f,-0.2545563280582428f,-0.3413182497024536f,-0.24413029849529266f},
{-0.17419426143169403f,0.23410338163375854f,-0.13502129912376404f,0.12825390696525574f,0.12987366318702698f,0.10837459564208984f,0.2711336314678192f,-0.3632148504257202f,-0.13619378209114075f,0.16938945651054382f,0.2463141530752182f,0.36859747767448425f,0.3811538517475128f,-0.2518221437931061f,0.0015065826009958982f,-0.22126294672489166f},
{-0.5818582773208618f,-0.9885985851287842f,0.0457797646522522f,-1.0289779901504517f,-0.03321319818496704f,-0.10241472721099854f,-0.1456492394208908f,-0.20421427488327026f,-0.050184011459350586f,0.12480869889259338f,0.03015293926000595f,-0.1720106303691864f,-0.3647043704986572f,-0.26887544989585876f,0.043931350111961365f,-1.271228551864624f},
{-0.023775232955813408f,0.4065960645675659f,0.3954955041408539f,0.12153828144073486f,0.0033026933670043945f,-0.34759125113487244f,-0.46868860721588135f,-0.11795541644096375f,0.3487861454486847f,-0.32520344853401184f,0.4603039026260376f,-0.684657633304596f,0.0820283591747284f,-0.7265788912773132f,0.4195437729358673f,0.7041466236114502f},
{-0.3727343678474426f,-0.14289318025112152f,-0.15798500180244446f,0.3409014940261841f,-0.37393757700920105f,0.33053267002105713f,0.11292675137519836f,-0.2947862446308136f,-0.3764709532260895f,0.2424570620059967f,-0.06061609461903572f,-0.3116716742515564f,0.41839322447776794f,-0.10966654866933823f,-0.16619719564914703f,0.13714851438999176f},
{-0.5560265779495239f,0.7481104135513306f,-0.2018718123435974f,-0.4556296467781067f,0.07545611262321472f,-1.7956639528274536f,-0.5900709629058838f,-0.21416273713111877f,-0.24509364366531372f,0.19522181153297424f,1.6568773984909058f,-1.7330076694488525f,-0.16718891263008118f,-2.74723219871521f,0.004431179724633694f,-0.960465669631958f},
{0.4138670265674591f,0.1604653298854828f,0.056746453046798706f,0.036025404930114746f,0.3228367865085602f,-0.07083973288536072f,0.018455177545547485f,0.0059362053871154785f,0.40515169501304626f,0.014240056276321411f,-0.07738298177719116f,0.1407785713672638f,-0.13024571537971497f,-0.29546058177948f,-0.11976784467697144f,-0.35825538635253906f},
{-0.5551757216453552f,0.8669682145118713f,0.12081471085548401f,-0.34179648756980896f,0.29976895451545715f,-0.03801266476511955f,-0.23086988925933838f,0.31089308857917786f,-0.3893685042858124f,-0.02222958207130432f,-0.0883992463350296f,-0.21656711399555206f,-0.19991017878055573f,-1.109067440032959f,0.42645376920700073f,0.903927206993103f},
};

const float h3[16][16] = { 
    {-0.36079341173171997f,-0.1728317141532898f,0.0832991823554039f,-0.2757801115512848f,-0.014608257450163364f,-0.07343047857284546f,0.3332441747188568f,0.3036012351512909f,-0.2405819296836853f,0.04891335964202881f,-0.11870327591896057f,0.4001283347606659f,0.19365239143371582f,0.22657039761543274f,-0.4084663987159729f,0.15862074494361877f},
{0.047732532024383545f,0.07508695870637894f,-0.40331459045410156f,-2.776319980621338f,-0.10381913185119629f,-0.224410742521286f,-0.3198729455471039f,0.06247803568840027f,-0.026402181014418602f,-0.9442688226699829f,0.649472713470459f,-0.3128277659416199f,-0.1413102000951767f,-1.077832579612732f,-0.426487535238266f,-0.34495070576667786f},
{0.07903262972831726f,0.2790505588054657f,-0.07798504829406738f,0.04248586297035217f,-0.1963958442211151f,-0.19260792434215546f,-0.4038352966308594f,0.015906542539596558f,0.15353140234947205f,0.030178606510162354f,0.2488909661769867f,0.13805970549583435f,-0.0816211998462677f,-0.20733052492141724f,-0.3036302626132965f,0.054825395345687866f},
{-0.30922991037368774f,-0.4433991611003876f,0.4574945271015167f,0.09743720293045044f,-0.0694722980260849f,0.14645597338676453f,0.20021501183509827f,0.07002416253089905f,-0.24844947457313538f,-0.365601509809494f,-0.2854161858558655f,0.41021624207496643f,0.10841058939695358f,0.03622414171695709f,0.07073167711496353f,-0.040545202791690826f},
{-0.39607733488082886f,-0.05481579899787903f,0.1976260244846344f,0.022423356771469116f,0.16892847418785095f,-0.27518749237060547f,0.16012099385261536f,0.3626593053340912f,-0.08640444278717041f,-0.11053556203842163f,-0.10529157519340515f,-0.31317979097366333f,-0.1530032455921173f,-0.1336749792098999f,0.22959044575691223f,0.19986507296562195f},
{-0.37449589371681213f,0.02758697420358658f,-0.748950719833374f,3.097226619720459f,0.16600477695465088f,0.3010225296020508f,-0.18732719123363495f,0.22384825348854065f,-0.39487534761428833f,-0.2469484806060791f,-1.296645164489746f,0.03210585191845894f,1.1341166496276855f,-5.499073505401611f,0.7008980512619019f,-0.3663637042045593f},
{0.4110594093799591f,0.41326889395713806f,-0.1446264535188675f,0.2394024282693863f,0.15542545914649963f,0.02894638292491436f,-0.08670487999916077f,-0.25336313247680664f,-0.030661463737487793f,-0.06259563565254211f,-0.1344406008720398f,0.35313835740089417f,0.09694360196590424f,0.23209775984287262f,0.21062560379505157f,-0.3391006588935852f},
{-0.40892091393470764f,0.043769627809524536f,-0.3867315948009491f,0.25968697667121887f,0.3424709737300873f,-0.051169753074645996f,-0.23312048614025116f,-0.390264093875885f,0.28059282898902893f,-0.1559126079082489f,-0.14134526252746582f,-0.0003446042537689209f,-0.2742875814437866f,-0.36560842394828796f,0.07994696497917175f,0.005298197269439697f},
{0.10697010159492493f,-0.12228584289550781f,-0.37870171666145325f,0.21184906363487244f,-0.37222859263420105f,-0.17138728499412537f,-0.1382003128528595f,0.3493293821811676f,-0.360889196395874f,-0.3875247836112976f,0.42142823338508606f,-0.3482915461063385f,-0.3289247751235962f,-0.2186824083328247f,0.09620395302772522f,-0.06898030638694763f},
{0.2847062647342682f,0.018552124500274658f,0.11435768008232117f,0.36562982201576233f,-0.047046810388565063f,0.30447837710380554f,0.2430230677127838f,0.2909286320209503f,-0.2802048921585083f,0.18043199181556702f,0.41849127411842346f,-0.287167489528656f,0.24394884705543518f,-0.14084559679031372f,-0.10168051719665527f,0.010465055704116821f},
{0.15459725260734558f,0.9851001501083374f,-0.5585569143295288f,-4.768768787384033f,-4.561844348907471f,-0.06768854707479477f,-0.08742031455039978f,0.05785742402076721f,-0.7121787667274475f,-0.7615283727645874f,-0.2505240738391876f,-0.4624474048614502f,0.17736832797527313f,0.07977358996868134f,1.0232466459274292f,0.12484536319971085f},
{-0.408692330121994f,-0.6701602935791016f,0.3410312831401825f,3.574692726135254f,1.6209317445755005f,-0.1792183518409729f,0.03285527229309082f,0.38763079047203064f,-0.20705322921276093f,-0.25883403420448303f,0.12809070944786072f,0.03996849060058594f,2.006563901901245f,-0.15693505108356476f,-3.104768991470337f,0.31507769227027893f},
{-0.2991822361946106f,0.3794580399990082f,-0.07897943258285522f,-0.05932474136352539f,0.08582660555839539f,0.24227938055992126f,-0.11253207921981812f,0.34576353430747986f,0.04814547300338745f,-0.35770976543426514f,-0.044228196144104004f,-0.36229726672172546f,0.015840977430343628f,-0.13475483655929565f,0.36124154925346375f,-0.16869547963142395f},
{-0.2675279378890991f,0.6613599061965942f,-0.5254913568496704f,0.5071489214897156f,-0.8461319208145142f,-0.028701091185212135f,-0.32875844836235046f,-0.31893211603164673f,-0.8966178297996521f,-1.0070687532424927f,-4.600563049316406f,-0.5409274101257324f,2.186650276184082f,-9.456685066223145f,0.5640637874603271f,0.011688347905874252f},
{-0.015470266342163086f,-1.0990486145019531f,0.36706429719924927f,-2.238311290740967f,1.893033504486084f,-0.9363606572151184f,0.05196094512939453f,-0.008358269929885864f,-0.43764856457710266f,-0.5347727537155151f,-0.9336159825325012f,-0.2734082341194153f,0.16708572208881378f,-0.05967127904295921f,-0.8606027364730835f,-0.6590554714202881f},
{0.1863725483417511f,0.10718924552202225f,-0.20982491970062256f,6.906591415405273f,3.032275915145874f,0.411905974149704f,0.04860696196556091f,0.17769548296928406f,-0.2722950279712677f,0.3353809714317322f,0.8508809804916382f,0.03773829713463783f,2.3911309242248535f,4.472320079803467f,0.3127724826335907f,-0.14473260939121246f},
};

const float hout[16] = { 0.45773375034332275f,0.3902415931224823f,-0.11512358486652374f,-0.18819743394851685f,-0.7611111402511597f,0.141798734664917f,0.0030125975608825684f,0.15066689252853394f,-0.07033118605613708f,-0.07679157704114914f,-0.12265626341104507f,-0.1242092102766037f,-0.20101481676101685f,0.2781880497932434f,0.12302208691835403f,-0.00921870581805706f };

const float b1[16] = { 0.6857439279556274f,0.8585952520370483f,-1.7145336866378784f,0.4170946180820465f,1.0364162921905518f,1.8229438066482544f,-0.058932315558195114f,0.5788186192512512f,0.48582303524017334f,-0.9250008463859558f,0.3594502806663513f,1.5126398801803589f,-0.3694119453430176f,-1.401212215423584f,-1.087764859199524f,1.1468214988708496f };

const float b2[16] = { -0.46634921431541443f,-1.174963116645813f,-1.4564176797866821f,-0.7021169662475586f,-0.6939148902893066f,1.0442237854003906f,-0.016787389293313026f,-0.30969977378845215f,-1.20063054561615f,-1.912178635597229f,0.9218783378601074f,1.205435872077942f,-0.07918518036603928f,1.5303215980529785f,1.0930001735687256f,2.110299587249756f };

const float b3[16] = { -1.963319182395935f,-0.47111451625823975f,-0.1743324249982834f,0.8459889888763428f,0.4399511516094208f,-0.047738414257764816f,-0.45353031158447266f,-0.6562485098838806f,-0.035808175802230835f,-0.08489542454481125f,-1.1606186628341675f,-0.10742253065109253f,-0.42785224318504333f,-0.04730849713087082f,-1.0170482397079468f,-0.5944331884384155f };

const float bout[1] = { -0.47615566849708557f };


float VALVE_POS_RAW_NN = 0.0f;
float DDV_JOINT_POS_FF(float REF_JOINT_VEL);

int main()
{

    HAL_Init();
    SystemClock_Config();
    
    /*********************************
    ***     Initialization
    *********************************/
    LED = 0;
    pc.baud(9600);

    // i2c init
    i2c.frequency(400 * 1000);          // 0.4 mHz
    wait_ms(2);                         // Power Up wait
    look_for_hardware_i2c();            // Hardware present
    init_as5510(i2c_slave_addr1);
    make_delay();

//    // spi init
    //eeprom.format(8,3);
    //eeprom.frequency(5000000); //5M
    enc.format(8,0);
    enc.frequency(5000000); //5M
    make_delay();

    //rom
    ROM_CALL_DATA();
    make_delay();

    // ADC init
    Init_ADC();
    make_delay();

    // Pwm init
    Init_PWM();
    TIM4->CR1 ^= TIM_CR1_UDIS;
    make_delay();

    // TMR3 init
    Init_TMR3();
    TIM3->CR1 ^= TIM_CR1_UDIS;
    make_delay();

    // TMR2 init
//    Init_TMR2();
//    TIM2->CR1 ^= TIM_CR1_UDIS;
//    make_delay();

    // CAN
    can.attach(&CAN_RX_HANDLER);
    CAN_ID_INIT();
    make_delay();

    //Timer priority
    NVIC_SetPriority(TIM3_IRQn, 2);
    //NVIC_SetPriority(TIM2_IRQn, 3);
    NVIC_SetPriority(TIM4_IRQn, 3);

    //can.reset();
    can.filter(msg.id, 0xFFFFF000, CANStandard);

    // spi _ enc
    spi_enc_set_init();
    make_delay();

    //DAC init
    if (SENSING_MODE == 0) {
        dac_1 = TORQUE_VREF / 3.3f;
        dac_2 = 0.0f;
    } else if (SENSING_MODE == 1) {
        dac_1 = PRES_A_VREF / 3.3f;
        dac_2 = PRES_B_VREF / 3.3f;
    }
    make_delay();

    for (int i=0; i<50; i++) {
        if(i%2==0)
            ID_index_array[i] = - i * 0.5f;
        else
            ID_index_array[i] =  (i+1) * 0.5f;
    }
    

    /************************************
    ***     Program is operating!
    *************************************/
    while(1) {
//        if(timer_while==1000 && OPERATING_MODE==5) {
        //if(timer_while==1000) {
            //i2c
            
            read_field(i2c_slave_addr1);
            if(DIR_VALVE_ENC < 0) value = 1023 - value;
            //            if(LED==1) {
            //                LED=0;
            //            } else
            //                LED = 1;
            timer_while = 0;
        //}
        
        timer_while ++;
        
        //LED = 0;
        
        if(NN_Control_Flag == 0) {
            LED = 0;
        }
        
        else if(NN_Control_Flag == 1) {
            
            int ind = 0;
            for(int i=0; i<numpast_u; i++) {
                input_NN[ind] = u_past[time_interval*i];
                ind = ind + 1;
            }

            for(int i=0; i<numpast_x; i++) {
                input_NN[ind] = x_past[time_interval*i] / 60.0f;
                ind = ind + 1;
            }
            input_NN[ind] = (pos.sen / ENC_PULSE_PER_POSITION) / 60.0f;
            ind = ind + 1;
//        for(int i=0;i<numfuture_x;i++){
//            input_NN[ind] = x_future[time_interval*i+time_interval] / 60.0f;
//            ind = ind + 1;
//        }

            for(int i=0; i<numpast_f; i++) {
                input_NN[ind] = f_past[time_interval*i] / 10000.0f + 0.5f;
                ind = ind + 1;
            }
            input_NN[ind] = torq.sen / 10000.0f + 0.5f;
            ind = ind + 1;
            for(int i=0; i<numfuture_f; i++) {
                input_NN[ind] = (f_future[time_interval*i+time_interval] - torq.sen)/10000.0f+0.5f;
//            input_NN[ind] = (f_future[time_interval*i+time_interval])/10000.0f+0.5f;
                ind = ind + 1;
            }
            
            float output1[16] = { 0.0f };
            float output2[16] = { 0.0f };
            float output3[16] = { 0.0f };
            float output = 0.0f;

            for (int index2 = 0; index2 < 16; index2++) {
                for (int index1 = 0; index1 < num_input; index1++) {
                    output1[index2] = output1[index2]
                                      + h1[index1][index2] * input_NN[index1];
                }
                output1[index2] = output1[index2] + b1[index2];
                if (output1[index2] < 0) {
                    output1[index2] = 0;
                }
            }

            for (int index2 = 0; index2 < 16; index2++) {
                for (int index1 = 0; index1 < 16; index1++) {
                    output2[index2] = output2[index2]
                                      + h2[index1][index2] * output1[index1];
                }
                output2[index2] = output2[index2] + b2[index2];
                if (output2[index2] < 0) {
                    output2[index2] = 0;
                }
            }

            for (int index2 = 0; index2 < 16; index2++) {
                for (int index1 = 0; index1 < 16; index1++) {
                    output3[index2] = output3[index2]
                                      + h3[index1][index2] * output2[index1];
                }
                output3[index2] = output3[index2] + b3[index2];
                if (output3[index2] < 0) {
                    output3[index2] = 0;
                }
            }

            for (int index2 = 0; index2 < 1; index2++) {
                for (int index1 = 0; index1 < 16; index1++) {
                    output = output + hout[index1] * output3[index1];
                }
                output = output + bout[index2];
                
            }
            output = 1.0f/(1.0f+exp(-output));
            output_normalized = output;
            output = output * 20000.0f - 10000.0f;
            
            if(output>=0) {
                valve_pos.ref = output*0.0001f*((double)VALVE_MAX_POS - (double) VALVE_CENTER) + (double) VALVE_CENTER;
            } else {
                valve_pos.ref = -output*0.0001f*((double)VALVE_MIN_POS - (double) VALVE_CENTER) + (double) VALVE_CENTER;
            }

//            // torque feedback
//            torq.err = f_past[0] - torq.sen; //[N]
////            torq.err_sum += torq.err/(float) TMR_FREQ_5k; //[N]
//            torq.err_sum += torq.err/(float) 1500.0f; //[N]
//    
//
//            valve_pos.ref = ((float) P_GAIN_JOINT_TORQUE * torq.err + (float) I_GAIN_JOINT_TORQUE * torq.err_sum) * 0.01f + DDV_JOINT_POS_FF(vel.sen) + valve_pos.ref * 0.01f;
//
//            if(I_GAIN_JOINT_TORQUE != 0) {
//                double Ka = 1.0f / (double) I_GAIN_JOINT_TORQUE * 100.0f;
//                if(valve_pos.ref>VALVE_MAX_POS) {
//                    double valve_pos_rem = valve_pos.ref - VALVE_MAX_POS;
//                    valve_pos_rem = valve_pos_rem * Ka;
//                    valve_pos.ref = VALVE_MAX_POS;
//                    torq.err_sum = torq.err_sum - valve_pos_rem/(float) 1500.0f;
//                } else if(valve_pos.ref < VALVE_MIN_POS) {
//                    double valve_pos_rem = valve_pos.ref - VALVE_MIN_POS;
//                    valve_pos_rem = valve_pos_rem * Ka;
//                    valve_pos.ref = VALVE_MIN_POS;
//                    torq.err_sum = torq.err_sum - valve_pos_rem/(float) 1500.0f;
//                }
//            }
            
            
            if(LED==1) {
                LED=0;
            } else
                LED = 1;
            
        }
        
        //LED = 1;
        

    }
}

float DDV_JOINT_POS_FF(float REF_JOINT_VEL)
{

    int i = 0;
    float Ref_Valve_Pos_FF = 0.0f;
    for(i=0; i<VALVE_POS_NUM; i++) {
        if(REF_JOINT_VEL >= min(JOINT_VEL[i],JOINT_VEL[i+1]) && REF_JOINT_VEL <=  max(JOINT_VEL[i],JOINT_VEL[i+1])) {
            if(i==0) {
                if(JOINT_VEL[i+1] == JOINT_VEL[i]) {
                    Ref_Valve_Pos_FF = (float) VALVE_CENTER;
                } else {
                    Ref_Valve_Pos_FF = ((float) 10/(JOINT_VEL[i+1] - JOINT_VEL[i]) * (REF_JOINT_VEL - JOINT_VEL[i])) + (float) VALVE_CENTER;
                }
            } else {
                if(JOINT_VEL[i+1] == JOINT_VEL[i-1]) {
                    Ref_Valve_Pos_FF = (float) VALVE_CENTER;
                } else {
                    Ref_Valve_Pos_FF = ((float) 10*(ID_index_array[i+1] - ID_index_array[i-1])/(JOINT_VEL[i+1] - JOINT_VEL[i-1]) * (REF_JOINT_VEL - JOINT_VEL[i-1])) + (float) VALVE_CENTER + (float) (10*ID_index_array[i-1]);
                }
            }
            break;
        }
    }
    if(REF_JOINT_VEL > max(JOINT_VEL[VALVE_POS_NUM-1], JOINT_VEL[VALVE_POS_NUM-2])) {
        Ref_Valve_Pos_FF = (float) VALVE_MAX_POS;
    } else if(REF_JOINT_VEL < min(JOINT_VEL[VALVE_POS_NUM-1], JOINT_VEL[VALVE_POS_NUM-2])) {
        Ref_Valve_Pos_FF = (float) VALVE_MIN_POS;
    }

    Ref_Valve_Pos_FF = (float) VELOCITY_COMP_GAIN * 0.01f * (float) (Ref_Valve_Pos_FF - (float) VALVE_CENTER);
    return Ref_Valve_Pos_FF;

}


void VALVE_POS_CONTROL(float REF_VALVE_POS)
{
    int i = 0;

    if(REF_VALVE_POS > VALVE_MAX_POS) {
        REF_VALVE_POS = VALVE_MAX_POS;
    } else if(REF_VALVE_POS < VALVE_MIN_POS) {
        REF_VALVE_POS = VALVE_MIN_POS;
    }

    valve_pos_err = (float) (REF_VALVE_POS - value);
    valve_pos_err_diff = valve_pos_err - valve_pos_err_old;
    valve_pos_err_old = valve_pos_err;
    valve_pos_err_sum += valve_pos_err;
    if (valve_pos_err_sum > 1000.0f) valve_pos_err_sum = 1000.0f;
    if (valve_pos_err_sum<-1000.0f) valve_pos_err_sum = -1000.0f;

    VALVE_PWM_RAW_FB = P_GAIN_VALVE_POSITION * valve_pos_err + I_GAIN_VALVE_POSITION * valve_pos_err_sum + D_GAIN_VALVE_POSITION * valve_pos_err_diff;

    for(i=0; i<24; i++) {
        if(REF_VALVE_POS >= min(VALVE_POS_VS_PWM[i],VALVE_POS_VS_PWM[i+1]) && (float) REF_VALVE_POS <=  max(VALVE_POS_VS_PWM[i],VALVE_POS_VS_PWM[i+1])) {
            if(i==0) {
                VALVE_PWM_RAW_FF = (float) 1000.0f / (float) (VALVE_POS_VS_PWM[i+1] - VALVE_POS_VS_PWM[i]) * ((float) REF_VALVE_POS - VALVE_POS_VS_PWM[i]);
            } else {
                VALVE_PWM_RAW_FF = (float) 1000.0f* (float) (ID_index_array[i+1] - ID_index_array[i-1])/(VALVE_POS_VS_PWM[i+1] - VALVE_POS_VS_PWM[i-1]) * ((float) REF_VALVE_POS - VALVE_POS_VS_PWM[i-1]) + 1000.0f * (float) ID_index_array[i-1];
            }
            break;
        }
    }
    Vout.ref = VALVE_PWM_RAW_FF + VALVE_PWM_RAW_FB;
}

#define LT_MAX_IDX  57
float LT_PWM_duty[LT_MAX_IDX] = {-100.0f, -80.0f, -60.0f, -50.0f, -40.0f, -35.0f, -30.0f, -25.0f, -20.0f,
                                 -19.0f, -18.0f, -17.0f, -16.0f, -15.0f, -14.0f, -13.0f, -12.0f, -11.0f, -10.0f,
                                 -9.0f, -8.0f, -7.0f, -6.0f, -5.0f, -4.0f, -3.0f, -2.0f, -1.0f, 0.0f,
                                 1.0f, 2.0f, 3.0f, 4.0f, 5.0f, 6.0f, 7.0f, 8.0f, 9.0f, 10.0f,
                                 11.0f, 12.0f, 13.0f, 14.0f, 15.0f, 16.0f, 17.0f, 18.0f, 19.0f, 20.0f,
                                 25.0f, 30.0f, 35.0f, 40.0f, 50.0f, 60.0f, 80.0f, 100.0f
                                };  // duty
float LT_Voltage_Output[LT_MAX_IDX] = {-230.0f, -215.0f, -192.5f, -185.0f, -177.5f, -170.0f, -164.0f, -160.0f, -150.0f,
                                       -150.0f, -145.0f, -145.0f, -145.0f, -135.0f, -135.0f, -135.0f, -127.5f, -127.5f, -115.0f,
                                       -115.0f, -115.0F, -100.0f, -100.0f, -100.0f, -60.0f, -60.0f, -10.0f, -5.0f, 0.0f,
                                       7.5f, 14.0f, 14.0f, 14.0f, 42.5f, 42.5f, 42.5f, 80.0f, 80.0f, 105.0f,
                                       105.0f, 105.0f, 120.0f, 120.0f, 120.0f, 131.0f, 131.0f, 140.0f, 140.0f, 140.0f,
                                       155.0f, 160.0f, 170.0f, 174.0f, 182.0f, 191.0f, 212.0f, 230.0f
                                      }; // mV

float PWM_duty_byLT(float Ref_V)
{
    float PWM_duty = 0.0f;
    if(Ref_V<LT_Voltage_Output[0]) {
        PWM_duty = (Ref_V-LT_Voltage_Output[0])/1.5f+LT_PWM_duty[0];
    } else if (Ref_V>=LT_Voltage_Output[LT_MAX_IDX-1]) {
        PWM_duty = (Ref_V-LT_Voltage_Output[LT_MAX_IDX-1])/1.5f+LT_PWM_duty[LT_MAX_IDX-1];
    } else {
        int idx = 0;
        for(idx=0; idx<LT_MAX_IDX-1; idx++) {
            float ini_x = LT_Voltage_Output[idx];
            float fin_x = LT_Voltage_Output[idx+1];
            float ini_y = LT_PWM_duty[idx];
            float fin_y = LT_PWM_duty[idx+1];
            if(Ref_V>=ini_x && Ref_V<fin_x) {
                PWM_duty = (fin_y-ini_y)/(fin_x-ini_x)*(Ref_V-ini_x) + ini_y;
                break;
            }
        }
    }

    return PWM_duty;
}





/*******************************************************************************
                            TIMER INTERRUPT
*******************************************************************************/

float FREQ_TMR4 = (float)FREQ_20k;
float DT_TMR4 = (float)DT_20k;
long  CNT_TMR4 = 0;
int   TMR4_FREQ_10k = (int)FREQ_10k;
extern "C" void TIM4_IRQHandler(void)
{
    if (TIM4->SR & TIM_SR_UIF ) {

        /*******************************************************
        ***     Sensor Read & Data Handling
        ********************************************************/

        //Encoder
        if (CNT_TMR4 % (int) ((int) FREQ_TMR4/TMR4_FREQ_10k) == 0) {
            ENC_UPDATE();
        }

        ADC1->CR2  |= 0x40000000;
        if (SENSING_MODE == 0) {
            // Torque Sensing (0~210)bar =============================================
            float pres_A_new = (((float) ADC1->DR) - 2047.5f);
            double alpha_update_ft = 1.0f / (1.0f + FREQ_TMR4 / (2.0f * 3.14f * 100.0f)); // f_cutoff : 200Hz
            pres_A.sen = (1.0f - alpha_update_ft) * pres_A.sen + alpha_update_ft * pres_A_new;
            torq.sen = -pres_A.sen / TORQUE_SENSOR_PULSE_PER_TORQUE;


//        float alpha_update_pres_A = 1.0f/(1.0f + FREQ_TMR4/(2.0f*3.14f*100.0f));
////        float pres_A_new = ((float)ADC1->DR - PRES_A_NULL)  / PRES_SENSOR_A_PULSE_PER_BAR;
//        float pres_A_new = ((float)ADC1->DR);
//        pres_A.sen = pres_A.sen*(1.0f-alpha_update_pres_A)+pres_A_new*(alpha_update_pres_A);
//        torq.sen = - (pres_A.sen-2048.0f); //pulse -2047~2047


        } else if (SENSING_MODE == 1) {
            // Pressure Sensing (0~210)bar =============================================
            float pres_A_new = (((float)ADC1->DR) - PRES_A_NULL);
            float pres_B_new = (((float)ADC2->DR) - PRES_B_NULL);
            double alpha_update_pres = 1.0f / (1.0f + FREQ_TMR4 / (2.0f * 3.14f * 200.0f)); // f_cutoff : 500Hz
            pres_A.sen = (1.0f - alpha_update_pres) * pres_A.sen + alpha_update_pres * pres_A_new;
            pres_B.sen = (1.0f - alpha_update_pres) * pres_B.sen + alpha_update_pres * pres_B_new;
            CUR_PRES_A_BAR = pres_A.sen / PRES_SENSOR_A_PULSE_PER_BAR;
            CUR_PRES_B_BAR = pres_B.sen / PRES_SENSOR_B_PULSE_PER_BAR;

            if ((OPERATING_MODE & 0x01) == 0) { // Rotary Actuator
                torq.sen = (PISTON_AREA_A * CUR_PRES_A_BAR - PISTON_AREA_B * CUR_PRES_B_BAR) * 0.0001f; // mm^3*bar >> Nm
            } else if ((OPERATING_MODE & 0x01) == 1) { // Linear Actuator
                torq.sen = (PISTON_AREA_A * CUR_PRES_A_BAR - PISTON_AREA_B * CUR_PRES_B_BAR) * 0.1f; // mm^2*bar >> N
            }
        }

//        //Pressure sensor A
//        ADC1->CR2  |= 0x40000000;                        // adc _ 12bit
//        //while((ADC1->SR & 0b10));
//        float alpha_update_pres_A = 1.0f/(1.0f + FREQ_TMR4/(2.0f*3.14f*100.0f));
//        float pres_A_new = ((float)ADC1->DR);
//        pres_A.sen = pres_A.sen*(1.0f-alpha_update_pres_A)+pres_A_new*(alpha_update_pres_A);
//        torq.sen = - (pres_A.sen-2048.0f); //pulse -2047~2047    //SW just changed the sign to correct the direction of loadcell on LIGHT. Correct later.
//
//
//        //Pressure sensor B
//        float alpha_update_pres_B = 1.0f/(1.0f + FREQ_TMR4/(2.0f*3.14f*100.0f));
//        float pres_B_new = ((float)ADC2->DR);
//        pres_B.sen = pres_B.sen*(1.0f-alpha_update_pres_B)+pres_B_new*(alpha_update_pres_B);
//        //torq.sen = pres_A.sen * (float) PISTON_AREA_A - pres_B.sen * (float) PISTON_AREA_B;


        //Current
        //ADC3->CR2  |= 0x40000000;                        // adc _ 12bit
        //int raw_cur = ADC3->DR;
        //while((ADC3->SR & 0b10));
        float alpha_update_cur = 1.0f/(1.0f + FREQ_TMR4/(2.0f*3.14f*500.0f)); // f_cutoff : 500Hz
        float cur_new = ((float)ADC3->DR-2048.0f)*20.0f/4096.0f; // unit : mA
        cur.sen=cur.sen*(1.0f-alpha_update_cur)+cur_new*(alpha_update_cur);
        //cur.sen = raw_cur;

        CNT_TMR4++;
    }
    TIM4->SR = 0x0;  // reset the status register
}


int j =0;
float FREQ_TMR3 = (float)FREQ_5k;
float DT_TMR3 = (float)DT_5k;
int cnt_trans = 0;
double VALVE_POS_RAW_FORCE_FB_LOGGING = 0.0f;
int can_rest =0;

extern "C" void TIM3_IRQHandler(void)
{
    if (TIM3->SR & TIM_SR_UIF ) {

        if (((OPERATING_MODE&0b110)>>1) == 0) {
            K_v = 0.4f; // Moog (LPM >> mA) , 100bar
            mV_PER_mA = 500.0f; // 5000mV/10mA
            mV_PER_pulse = 0.5f; // 5000mV/10000pulse
            mA_PER_pulse = 0.001f; // 10mA/10000pulse
        } else if (((OPERATING_MODE&0b110)>>1) == 1) {
            K_v = 0.5f; // KNR (LPM >> mA) , 100bar
            mV_PER_mA = 166.6666f; // 5000mV/30mA
            mV_PER_pulse = 0.5f; // 5000mV/10000pulse
            mA_PER_pulse = 0.003f; // 30mA/10000pulse
        }

        if(MODE_POS_FT_TRANS == 1) {
            alpha_trans = (float)(1.0f - cos(3.141592f * (float)cnt_trans * DT_TMR3 /3.0f))/2.0f;
            cnt_trans++;
            torq.err_sum = 0;
            if((float)cnt_trans * DT_TMR3 > 3.0f)
                MODE_POS_FT_TRANS = 2;
        } else if(MODE_POS_FT_TRANS == 3) {
            alpha_trans = (float)(1.0f + cos(3.141592f * (float)cnt_trans * DT_TMR3 /3.0f))/2.0f;
            cnt_trans++;
            torq.err_sum = 0;
            if((float) cnt_trans * DT_TMR3 > 3.0f )
                MODE_POS_FT_TRANS = 0;
        } else if(MODE_POS_FT_TRANS == 2) {
            alpha_trans = 1.0f;
            cnt_trans = 0;
        } else {
            alpha_trans = 0.0f;
            cnt_trans = 0;
        }


        int UTILITY_MODE = 0;
        int CONTROL_MODE = 0;

        if (CONTROL_UTILITY_MODE >= 20 || CONTROL_UTILITY_MODE == 0) {
            UTILITY_MODE = CONTROL_UTILITY_MODE;
            CONTROL_MODE = MODE_NO_ACT;
        } else {
            CONTROL_MODE = CONTROL_UTILITY_MODE;
            UTILITY_MODE = MODE_NO_ACT;
        }



        // UTILITY MODE ------------------------------------------------------------

        switch (UTILITY_MODE) {
            case MODE_NO_ACT: {
                break;
            }

            case MODE_TORQUE_SENSOR_NULLING: {
                // DAC Voltage reference set
                if (TMR3_COUNT_TORQUE_NULL < TMR_FREQ_5k * 2) {
                    CUR_TORQUE_sum += torq.sen;

                    if (TMR3_COUNT_TORQUE_NULL % 10 == 0) {
                        CUR_TORQUE_mean = CUR_TORQUE_sum / 10.0f;
                        CUR_TORQUE_sum = 0;

                        TORQUE_VREF += 0.000003f * (0.0f - CUR_TORQUE_mean);

                        if (TORQUE_VREF > 3.3f) TORQUE_VREF = 3.3f;
                        if (TORQUE_VREF < 0.0f) TORQUE_VREF = 0.0f;

                        //spi_eeprom_write(RID_TORQUE_SENSOR_VREF, (int16_t) (TORQUE_VREF * 1000.0));
                        dac_1 = TORQUE_VREF / 3.3f;
                    }
                } else {
                    CONTROL_UTILITY_MODE = MODE_NO_ACT;
                    TMR3_COUNT_TORQUE_NULL = 0;
                    CUR_TORQUE_sum = 0;
                    CUR_TORQUE_mean = 0;

                    ROM_RESET_DATA();

                    dac_1 = TORQUE_VREF / 3.3f;

                }
                TMR3_COUNT_TORQUE_NULL++;
                break;
            }

//            case MODE_VALVE_NULLING_AND_DEADZONE_SETTING: {
//                if (TMR3_COUNT_DEADZONE == 0) {
//                    if (pos_plus_end == pos_minus_end) need_enc_init = true;
//                    else temp_time = 0;
//                }
//                if (need_enc_init) {
//                    if (TMR3_COUNT_DEADZONE < (int) (0.5f * (float) TMR_FREQ_5k)) {
//                        V_out = VALVE_VOLTAGE_LIMIT * 1000.0f;
//                        pos_plus_end = pos.sen;
//                    } else if (TMR3_COUNT_DEADZONE < TMR_FREQ_5k) {
//                        V_out = -VALVE_VOLTAGE_LIMIT * 1000.0f;
//                        pos_minus_end = pos.sen;
//                    } else if (TMR3_COUNT_DEADZONE == TMR_FREQ_5k) need_enc_init = false;
//                    temp_time = TMR_FREQ_5k;
//                }
//
//                if (temp_time <= TMR3_COUNT_DEADZONE && TMR3_COUNT_DEADZONE < (temp_time + TMR_FREQ_5k)) {
//                    V_out = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen);
//                    VALVE_CENTER = VALVE_DEADZONE_PLUS = VALVE_DEADZONE_MINUS = 0;
//
//                } else if (temp_time <= TMR3_COUNT_DEADZONE && TMR3_COUNT_DEADZONE < (temp_time + (int) (1.9f * (float) TMR_FREQ_5k))) {
//                    V_out = 0;
//                    CUR_VELOCITY_sum += CUR_VELOCITY;
//                } else if (TMR3_COUNT_DEADZONE == (temp_time + 2 * TMR_FREQ_5k)) {
//                    if (CUR_VELOCITY_sum == 0) DZ_dir = 1;
//                    else if (CUR_VELOCITY_sum > 0) DZ_dir = 1;
//                    else if (CUR_VELOCITY_sum < 0) DZ_dir = -1;
//                    else DZ_temp_cnt2 = DZ_end;
//                    CUR_VELOCITY_sum = 0;
//                } else if (TMR3_COUNT_DEADZONE > (temp_time + 2 * TMR_FREQ_5k)) {
//                    if (TMR3_COUNT_DEADZONE > (temp_time + 10 * TMR_FREQ_5k)) DZ_temp_cnt2 = DZ_end;
//
//                    // Position of Dead Zone
//                    //  (CUR_VELOCITY < 0)  (CUR_VELOCITY == 0)  (CUR_VELOCITY > 0)
//                    //     |        /                 |    /                      |/
//                    //     | ______/               ___|___/                ______/|
//                    //     |/                     /   |                   /       |
//                    //    /|                     /    |                  /        |
//                    //     0V                         0V                          0V
//
//                    if (DZ_temp_cnt2 < DZ_end) {
//                        if (TMR3_COUNT_DEADZONE % 20 != 0) {
//                            CUR_VELOCITY_sum += CUR_VELOCITY;
//                        } else {
//                            V_out -= DZ_dir;
//                            if (CUR_VELOCITY_sum * DZ_dir < 0) DZ_temp_cnt++;
//                            CUR_VELOCITY_sum = 0;
//                        }
//                        if (DZ_temp_cnt == 5) {
//                            if (DZ_dir >= 0) VALVE_DEADZONE_MINUS = (int16_t) V_out;
//                            else VALVE_DEADZONE_PLUS = (int16_t) V_out;
//                            DZ_dir = -DZ_dir;
//                            DZ_temp_cnt = 0;
//                            DZ_temp_cnt2++;
//                        }
//                    } else {
//                        TMR3_COUNT_DEADZONE = -1;
//                        VALVE_CENTER = VALVE_DEADZONE_PLUS / 2 + VALVE_DEADZONE_MINUS / 2;
//                        if (VALVE_DEADZONE_PLUS < VALVE_DEADZONE_MINUS) {
//                            VALVE_DEADZONE_PLUS = VALVE_CENTER;
//                            VALVE_DEADZONE_MINUS = VALVE_CENTER;
//                        }
//                        V_out = 0;
//
//                        ROM_RESET_DATA();
//
//                        //spi_eeprom_write(RID_VALVE_DEADZONE_PLUS, VALVE_DEADZONE_PLUS);
//                        //spi_eeprom_write(RID_VALVE_DEADZONE_MINUS, VALVE_DEADZONE_MINUS);
//
//                        CONTROL_MODE = MODE_NO_ACT;
//                        DZ_temp_cnt2 = 0;
//                    }
//                }
//                TMR3_COUNT_DEADZONE++;
//                break;
//            }

            case MODE_FIND_HOME: {
                if (FINDHOME_STAGE == FINDHOME_INIT) {
                    cnt_findhome = 0;
                    cnt_vel_findhome = 0;
                    //REFERENCE_MODE = MODE_REF_NO_ACT; // Stop taking reference data from PODO
                    pos.ref = pos.sen;
                    vel.ref = 0.0f;
                    FINDHOME_STAGE = FINDHOME_GOTOLIMIT;
                } else if (FINDHOME_STAGE == FINDHOME_GOTOLIMIT) {
                    int cnt_check_enc = (TMR_FREQ_5k/20);
                    if(cnt_findhome%cnt_check_enc == 0) {
                        FINDHOME_POSITION = pos.sen;
                        FINDHOME_VELOCITY = FINDHOME_POSITION - FINDHOME_POSITION_OLD;
                        FINDHOME_POSITION_OLD = FINDHOME_POSITION;
                    }
                    cnt_findhome++;

                    if (abs(FINDHOME_VELOCITY) <= 1) {
                        cnt_vel_findhome = cnt_vel_findhome + 1;
                    } else {
                        cnt_vel_findhome = 0;
                    }

                    if ((cnt_vel_findhome < 3*TMR_FREQ_5k) &&  cnt_findhome < 10*TMR_FREQ_5k) { // wait for 3sec
                        //REFERENCE_MODE = MODE_REF_NO_ACT;
                        if (HOMEPOS_OFFSET > 0) pos.ref = pos.ref + 12.0f;
                        else pos.ref = pos.ref - 12.0f;

//                        pos.err = pos.ref_home_pos - pos.sen;
//                        float VALVE_POS_RAW_POS_FB = 0.0f;
//                        VALVE_POS_RAW_POS_FB = (float) P_GAIN_JOINT_POSITION * pos.err/(float) ENC_PULSE_PER_POSITION * 0.01f;
//                        valve_pos.ref = VALVE_POS_RAW_POS_FB + (float) VALVE_CENTER;
//                        VALVE_POS_CONTROL(valve_pos.ref);

                        CONTROL_MODE = MODE_JOINT_CONTROL;
                        alpha_trans = 0.0f;


                    } else {
                        ENC_SET(HOMEPOS_OFFSET);
//                        ENC_SET_ZERO();
                        INIT_REF_POS = HOMEPOS_OFFSET;
                        REF_POSITION = 0;
                        REF_VELOCITY = 0;
                        FINDHOME_POSITION = 0;
                        FINDHOME_POSITION_OLD = 0;
                        FINDHOME_VELOCITY = 0;
                        cnt_findhome = 0;
                        cnt_vel_findhome = 0;
                        FINDHOME_STAGE = FINDHOME_ZEROPOSE;


                        cnt_findhome = 0;
                        pos.ref = 0.0f;
                        vel.ref = 0.0f;
                        pos.ref_home_pos = 0.0f;
                        vel.ref_home_pos = 0.0f;
                        //FINDHOME_STAGE = FINDHOME_INIT;
                        //CONTROL_UTILITY_MODE = MODE_JOINT_CONTROL;
                        
                        
                    }
                } else if (FINDHOME_STAGE == FINDHOME_ZEROPOSE) {
                    int T_move = 2*TMR_FREQ_5k;
                    pos.ref = (0.0f - (float)INIT_REF_POS)*0.5f*(1.0f - cos(3.14159f * (float)cnt_findhome / (float)T_move)) + (float)INIT_REF_POS;
                    //pos.ref = 0.0f;
                    vel.ref = 0.0f;
                    
                    // input for position control
                
//                    CONTROL_MODE = MODE_JOINT_CONTROL;
                    alpha_trans = 0.0f;

                    double torq_ref = 0.0f;
                    pos.err = (pos.ref - pos.sen)/(float)(ENC_PULSE_PER_POSITION); //[mm]
                    vel.err = (0.0f - vel.sen)/(float)(ENC_PULSE_PER_POSITION); //[mm/s]
                    pos.err_sum += pos.err/(float) TMR_FREQ_5k; //[mm]

                    if (((OPERATING_MODE&0b110)>>1) == 0 || ((OPERATING_MODE&0b110)>>1) == 1) {

                        double I_REF_POS = 0.0f;
                        double I_REF_FORCE_FB = 0.0f; // I_REF by Force Feedback
                        double I_REF_VC = 0.0f; // I_REF for velocity compensation

                        double temp_vel_pos = 0.0f;
                        double temp_vel_torq = 0.0f;
                        double wn_Pos = 2.0f * PI * 5.0f; // f_cut : 5Hz Position Control

                        if ((OPERATING_MODE & 0x01) == 0) { // Rotary Mode
                            temp_vel_pos = (0.01f * (double) P_GAIN_JOINT_POSITION * wn_Pos * pos.err + 0.01f * (double) I_GAIN_JOINT_POSITION * wn_Pos * pos.err_sum + 0.01f * (double) VELOCITY_COMP_GAIN * vel.ref / ENC_PULSE_PER_POSITION) * 3.14159f / 180.0f; // rad/s
                            //                            L when P-gain = 100, f_cut = 10Hz                                 L feedforward velocity
                        } else if ((OPERATING_MODE & 0x01) == 1) {
                            temp_vel_pos = (0.01f * (double) P_GAIN_JOINT_POSITION * wn_Pos * pos.err + 0.01f * (double) I_GAIN_JOINT_POSITION * wn_Pos * pos.err_sum + 0.01f * (double) VELOCITY_COMP_GAIN * vel.ref / ENC_PULSE_PER_POSITION); // mm/s
                            //                            L when P-gain = 100, f_cut = 10Hz                                 L feedforward velocity
                        }
                        if (temp_vel_pos > 0.0f) I_REF_POS = temp_vel_pos * ((double) PISTON_AREA_A * 0.00006f / (K_v * sqrt(2.0f * alpha3 / (alpha3 + 1.0f))));
                        else I_REF_POS = temp_vel_pos * ((double) PISTON_AREA_B * 0.00006f / (K_v * sqrt(2.0f / (alpha3 + 1.0f))));

                        I_REF = I_REF_POS;



                    } else {
                        float VALVE_POS_RAW_FORCE_FB = 0.0f;
                        VALVE_POS_RAW_FORCE_FB = DDV_JOINT_POS_FF(vel.sen) + (P_GAIN_JOINT_POSITION * 0.01f * pos.err + DDV_JOINT_POS_FF(vel.ref));

                        if (VALVE_POS_RAW_FORCE_FB >= 0) {
                            valve_pos.ref = VALVE_POS_RAW_FORCE_FB + VALVE_DEADZONE_PLUS;
                        } else {
                            valve_pos.ref = VALVE_POS_RAW_FORCE_FB + VALVE_DEADZONE_MINUS;
                        }

                        VALVE_POS_CONTROL(valve_pos.ref);

                        V_out = (float) Vout.ref;

                    }


                    
                    
//                    pos.err = pos.ref - (float)pos.sen;
//                    float VALVE_POS_RAW_POS_FB = 0.0f;
//                    VALVE_POS_RAW_POS_FB = (float) P_GAIN_JOINT_POSITION * 0.01f * pos.err/(float) ENC_PULSE_PER_POSITION;
//                    valve_pos.ref = VALVE_POS_RAW_POS_FB + (float) VALVE_CENTER;
//                    VALVE_POS_CONTROL(valve_pos.ref);

                    cnt_findhome++;
                    if (cnt_findhome >= T_move) {
                        //REFERENCE_MODE = MODE_REF_DIRECT;
                        cnt_findhome = 0;
                        pos.ref = 0.0f;
                        vel.ref = 0.0f;
                        pos.ref_home_pos = 0.0f;
                        vel.ref_home_pos = 0.0f;
                        FINDHOME_STAGE = FINDHOME_INIT;
                        CONTROL_UTILITY_MODE = MODE_JOINT_CONTROL;
                    }
                }

                break;
            }

//            case MODE_VALVE_GAIN_SETTING: {
//                if (TMR3_COUNT_FLOWRATE == 0) {
//                    if (pos_plus_end == pos_minus_end) need_enc_init = true;
//                    else {
//                        V_out = -VALVE_VOLTAGE_LIMIT * 1000.0f;
//                        temp_time = (int) (0.5f * (float) TMR_FREQ_5k);
//                    }
//                }
//                if (need_enc_init) {
//                    if (TMR3_COUNT_FLOWRATE < (int) (0.5f * (float) TMR_FREQ_5k)) {
//                        V_out = VALVE_VOLTAGE_LIMIT * 1000.0f;
//                        pos_plus_end = pos.sen;
//                    } else if (TMR3_COUNT_FLOWRATE < TMR_FREQ_5k) {
//                        V_out = -VALVE_VOLTAGE_LIMIT * 1000.0f;
//                        pos_minus_end = pos.sen;
//                    } else if (TMR3_COUNT_FLOWRATE == TMR_FREQ_5k) {
//                        need_enc_init = false;
//                        check_vel_pos_init = (int) (0.9f * (float) (pos_plus_end - pos_minus_end));
//                        check_vel_pos_fin = (int) (0.95f * (float) (pos_plus_end - pos_minus_end));
//                        check_vel_pos_interv = check_vel_pos_fin - check_vel_pos_init;
//                    }
//                    temp_time = TMR_FREQ_5k;
//                }
//                TMR3_COUNT_FLOWRATE++;
//                if (TMR3_COUNT_FLOWRATE > temp_time) {
//                    if (flag_flowrate % 2 == 0) { // (+)
//                        VALVE_VOLTAGE = 1000.0f * (float) (flag_flowrate / 2 + 1);
//                        V_out = VALVE_VOLTAGE;
//                        if (pos.sen > (pos_minus_end + check_vel_pos_init) && pos.sen < (pos_minus_end + check_vel_pos_fin)) {
//                            fl_temp_cnt++;
//                        } else if (pos.sen >= (pos_minus_end + check_vel_pos_fin) && CUR_VELOCITY == 0) {
//                            VALVE_GAIN_LPM_PER_V[flag_flowrate] = 0.95873f * 0.5757f * (float) TMR_FREQ_5k / 10000.0 * (float) check_vel_pos_interv / (float) fl_temp_cnt / VALVE_VOLTAGE; // 0.9587=6*pi/65536*10000 0.5757=0.02525*0.02*0.0095*2*60*1000
//                            //                        VALVE_GAIN_LPM_PER_V[flag_flowrate] = (float) TMR_FREQ_10k * (float) check_vel_pos_interv / (float) fl_temp_cnt / VALVE_VOLTAGE; // PULSE/sec
//                            fl_temp_cnt2++;
//                        }
//                    } else if (flag_flowrate % 2 == 1) { // (-)
//                        VALVE_VOLTAGE = -1. * (float) (flag_flowrate / 2 + 1);
//                        V_out = VALVE_VOLTAGE;
//                        if (pos.sen < (pos_plus_end - check_vel_pos_init) && pos.sen > (pos_plus_end - check_vel_pos_fin)) {
//                            fl_temp_cnt++;
//                        } else if (pos.sen <= (pos_plus_end - check_vel_pos_fin) && CUR_VELOCITY == 0) {
//                            VALVE_GAIN_LPM_PER_V[flag_flowrate] = 0.95873f * 0.5757f * (float) TMR_FREQ_5k / 10000.0f * (float) check_vel_pos_interv / (float) fl_temp_cnt / (-VALVE_VOLTAGE);
//                            //                        VALVE_GAIN_LPM_PER_V[flag_flowrate] = (float) TMR_FREQ_10k * (float) check_vel_pos_interv / (float) fl_temp_cnt / (-VALVE_VOLTAGE); // PULSE/sec
//                            fl_temp_cnt2++;
//                        }
//                    }
//                    if (fl_temp_cnt2 == 100) {
//
//                        ROM_RESET_DATA();
//
//                        //spi_eeprom_write(RID_VALVE_GAIN_PLUS_1 + flag_flowrate, (int16_t) (VALVE_GAIN_LPM_PER_V[flag_flowrate] * 100.0f));
//                        cur_vel_sum = 0;
//                        fl_temp_cnt = 0;
//                        fl_temp_cnt2 = 0;
//                        flag_flowrate++;
//                    }
//                    if (flag_flowrate == 10) {
//                        V_out = 0;
//                        flag_flowrate = 0;
//                        TMR3_COUNT_FLOWRATE = 0;
//                        valve_gain_repeat_cnt++;
//                        if (valve_gain_repeat_cnt >= 1) {
//                            CONTROL_MODE = MODE_NO_ACT;
//                            valve_gain_repeat_cnt = 0;
//                        }
//
//                    }
//                    break;
//                }
//
//            }
            case MODE_PRESSURE_SENSOR_NULLING: {
                // DAC Voltage reference set
                if (TMR3_COUNT_PRES_NULL < TMR_FREQ_5k * 2) {
                    CUR_PRES_A_sum += pres_A.sen;
                    CUR_PRES_B_sum += pres_B.sen;

                    if (TMR3_COUNT_PRES_NULL % 10 == 0) {
                        CUR_PRES_A_mean = CUR_PRES_A_sum / 10.0f;
                        CUR_PRES_B_mean = CUR_PRES_B_sum / 10.0f;
                        CUR_PRES_A_sum = 0;
                        CUR_PRES_B_sum = 0;

                        float VREF_NullingGain = 0.0003f;
                        PRES_A_VREF = PRES_A_VREF + VREF_NullingGain * CUR_PRES_A_mean;
                        PRES_B_VREF = PRES_B_VREF + VREF_NullingGain * CUR_PRES_B_mean;

                        if (PRES_A_VREF > 3.3f) PRES_A_VREF = 3.3f;
                        if (PRES_A_VREF < 0.0f) PRES_A_VREF = 0.0f;
                        if (PRES_B_VREF > 3.3f) PRES_B_VREF = 3.3f;
                        if (PRES_B_VREF < 0.0f) PRES_B_VREF = 0.0f;

                        dac_1 = PRES_A_VREF / 3.3f;
                        dac_2 = PRES_B_VREF / 3.3f;
                    }
                } else {
                    CONTROL_UTILITY_MODE = MODE_NO_ACT;
                    TMR3_COUNT_PRES_NULL = 0;
                    CUR_PRES_A_sum = 0;
                    CUR_PRES_B_sum = 0;
                    CUR_PRES_A_mean = 0;
                    CUR_PRES_B_mean = 0;

                    ROM_RESET_DATA();

                    dac_1 = PRES_A_VREF / 3.3f;
                    dac_2 = PRES_B_VREF / 3.3f;
                    //pc.printf("nulling end");
                }
                TMR3_COUNT_PRES_NULL++;
                break;
            }

//            case MODE_PRESSURE_SENSOR_CALIB: {
//                if (TMR3_COUNT_PRES_CALIB < 2 * TMR_FREQ_5k) {
//                    V_out = -VALVE_VOLTAGE_LIMIT * 1000.0f;
//                    if (TMR3_COUNT_PRES_CALIB >= TMR_FREQ_5k) {
//                        CUR_PRES_A_sum += CUR_PRES_A;
//                    }
//                } else if (TMR3_COUNT_PRES_CALIB < 4 * TMR_FREQ_5k) {
//                    V_out = VALVE_VOLTAGE_LIMIT * 1000.0f;
//                    if (TMR3_COUNT_PRES_CALIB >= 3 * TMR_FREQ_5k) {
//                        CUR_PRES_B_sum += CUR_PRES_B;
//                    }
//                } else {
//                    CONTROL_MODE = MODE_NO_ACT;
//                    TMR3_COUNT_PRES_CALIB = 0;
//                    V_out = 0;
//                    PRES_SENSOR_A_PULSE_PER_BAR = CUR_PRES_A_sum / ((float) TMR_FREQ_5k - 1.0f) - PRES_A_NULL;
//                    PRES_SENSOR_A_PULSE_PER_BAR = PRES_SENSOR_A_PULSE_PER_BAR / ((float) PRES_SUPPLY - 1.0f);
//                    PRES_SENSOR_B_PULSE_PER_BAR = CUR_PRES_B_sum / ((float) TMR_FREQ_5k - 1.0f) - PRES_B_NULL;
//                    PRES_SENSOR_B_PULSE_PER_BAR = PRES_SENSOR_B_PULSE_PER_BAR / ((float) PRES_SUPPLY - 1.0f);
//                    CUR_PRES_A_sum = 0;
//                    CUR_PRES_B_sum = 0;
//                    CUR_PRES_A_mean = 0;
//                    CUR_PRES_B_mean = 0;
//
//                    ROM_RESET_DATA();
//
//                    //spi_eeprom_write(RID_PRES_SENSOR_A_PULSE_PER_BAR, (int16_t) (PRES_SENSOR_A_PULSE_PER_BAR * 100.0f));
//                    //spi_eeprom_write(RID_PRES_SENSOR_B_PULSE_PER_BAR, (int16_t) (PRES_SENSOR_B_PULSE_PER_BAR * 100.0f));
//                }
//                TMR3_COUNT_PRES_CALIB++;
//                break;
//            }

//            case MODE_ROTARY_FRICTION_TUNING: {
//                if (TMR3_COUNT_ROTARY_FRIC_TUNE % (5 * TMR_FREQ_5k) == 0) freq_fric_tune = 4.0f + 3.0f * sin(2 * 3.14159f * 0.5f * TMR3_COUNT_ROTARY_FRIC_TUNE * 0.0001f * 0.05f);
//                V_out = PWM_out * sin(2 * 3.14159f * freq_fric_tune * TMR3_COUNT_ROTARY_FRIC_TUNE * 0.0001f);
//                if (V_out > 0) V_out = VALVE_VOLTAGE_LIMIT * 1000.0f;
//                else V_out = -VALVE_VOLTAGE_LIMIT * 1000.0f;
//                TMR3_COUNT_ROTARY_FRIC_TUNE++;
//                if (TMR3_COUNT_ROTARY_FRIC_TUNE > TUNING_TIME * TMR_FREQ_5k) {
//                    TMR3_COUNT_ROTARY_FRIC_TUNE = 0;
//                    V_out = 0.0f;
//                    CONTROL_MODE = MODE_NO_ACT;
//                }
//                break;
//            }

            case MODE_DDV_POS_VS_PWM_ID: {
                CONTROL_MODE = MODE_VALVE_OPEN_LOOP;
                VALVE_ID_timer = VALVE_ID_timer + 1;

                if(VALVE_ID_timer < TMR_FREQ_5k*1) {
                    Vout.ref = 3000.0f * sin(2.0f*3.14f*VALVE_ID_timer/TMR_FREQ_5k * 100.0f);
                } else if(VALVE_ID_timer < TMR_FREQ_5k*2) {
                    Vout.ref = 1000.0f*(ID_index_array[ID_index]);
                } else if(VALVE_ID_timer == TMR_FREQ_5k*2) {
                    VALVE_POS_TMP = 0;
                    data_num = 0;
                } else if(VALVE_ID_timer < TMR_FREQ_5k*3) {
                    data_num = data_num + 1;
                    VALVE_POS_TMP = VALVE_POS_TMP + value;
                } else if(VALVE_ID_timer == TMR_FREQ_5k*3) {
                    Vout.ref = 0.0f;
                } else {
                    VALVE_POS_AVG[ID_index] = VALVE_POS_TMP / data_num;
                    VALVE_ID_timer = 0;
                    ID_index= ID_index +1;
                }

                if(ID_index>=25) {
                    int i;
                    VALVE_POS_AVG_OLD = VALVE_POS_AVG[0];
                    for(i=0; i<25; i++) {
                        VALVE_POS_VS_PWM[i] = (int16_t) (VALVE_POS_AVG[i]);
                        if(VALVE_POS_AVG[i] > VALVE_POS_AVG_OLD) {
                            VALVE_MAX_POS = VALVE_POS_AVG[i];
                            VALVE_POS_AVG_OLD = VALVE_MAX_POS;
                        } else if(VALVE_POS_AVG[i] < VALVE_POS_AVG_OLD) {
                            VALVE_MIN_POS = VALVE_POS_AVG[i];
                            VALVE_POS_AVG_OLD = VALVE_MIN_POS;
                        }
                    }
                    ROM_RESET_DATA();
                    ID_index = 0;
                    CONTROL_UTILITY_MODE = MODE_NO_ACT;
                }


                break;
            }

            case MODE_DDV_DEADZONE_AND_CENTER: {
                CONTROL_MODE = MODE_VALVE_OPEN_LOOP;
                VALVE_DZ_timer = VALVE_DZ_timer + 1;
                if(first_check == 0) {
                    if(VALVE_DZ_timer < (int) (1.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = VALVE_VOLTAGE_LIMIT * 1000.0f;
                    } else if(VALVE_DZ_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = VALVE_VOLTAGE_LIMIT * 1000.0f;
                        pos_plus_end = pos.sen;
                    } else if(VALVE_DZ_timer < (int) (2.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = -VALVE_VOLTAGE_LIMIT * 1000.0f;
                    } else if(VALVE_DZ_timer == (int) (2.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = -VALVE_VOLTAGE_LIMIT * 1000.0f;
                        pos_minus_end = pos.sen;
                    } else if(VALVE_DZ_timer < (int) (3.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                    } else if(VALVE_DZ_timer < (int) (4.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                        data_num = data_num + 1;
                        VALVE_POS_TMP = VALVE_POS_TMP + value;
                    } else if(VALVE_DZ_timer == (int) (4.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                        DDV_POS_AVG = VALVE_POS_TMP / data_num;
                        START_POS = pos.sen;
                        VALVE_POS_TMP = 0;
                        data_num = 0;

                    } else if(VALVE_DZ_timer < (int) (5.0f * (float) TMR_FREQ_5k)) {
                        valve_pos.ref = DDV_POS_AVG;
                        VALVE_POS_CONTROL(valve_pos.ref);

                    } else if(VALVE_DZ_timer < (int) (6.0f * (float) TMR_FREQ_5k)) {
                        valve_pos.ref = DDV_POS_AVG;
                        VALVE_POS_CONTROL(valve_pos.ref);

                    } else if(VALVE_DZ_timer == (int) (6.0f * (float) TMR_FREQ_5k)) {
                        valve_pos.ref = DDV_POS_AVG;
                        VALVE_POS_CONTROL(valve_pos.ref);
                        FINAL_POS = pos.sen;

                        if((FINAL_POS - START_POS)>200) {
                            DZ_case = 1;
                        } else if((FINAL_POS - START_POS)<-200) {
                            DZ_case = -1;
                        } else {
                            DZ_case = 0;
                        }

                        CAN_TX_PRES((int16_t) (DZ_case), (int16_t) (6));

                        first_check = 1;
                        DZ_DIRECTION = 1;
                        VALVE_DZ_timer = 0;
                        Ref_Valve_Pos_Old = DDV_POS_AVG;
                        DZ_NUM = 1;
                        DZ_index = 1;

                    }
                } else {
                    if((DZ_case == -1 && DZ_NUM == 1) | (DZ_case == 1 && DZ_NUM == 1)) {
                        if(VALVE_DZ_timer < (int) (1.0 * (float) TMR_FREQ_5k)) {
                            Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                            //pos.ref = 0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end;
                            //CONTROL_MODE = MODE_JOINT_CONTROL;
                        } else if(VALVE_DZ_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                            START_POS = pos.sen;
                        } else if(VALVE_DZ_timer < (int) (2.0f * (float) TMR_FREQ_5k)) {
                            valve_pos.ref = Ref_Valve_Pos_Old  - DZ_case * DZ_DIRECTION * 64 / DZ_index;
                            if(valve_pos.ref <= VALVE_MIN_POS) {
                                valve_pos.ref = VALVE_MIN_POS;
                            } else if(valve_pos.ref >= VALVE_MAX_POS) {
                                valve_pos.ref = VALVE_MAX_POS;
                            }
                            VALVE_POS_CONTROL(valve_pos.ref);

                        } else if(VALVE_DZ_timer == (int) (2.0f * (float) TMR_FREQ_5k)) {
                            Ref_Valve_Pos_Old = valve_pos.ref;
                            FINAL_POS = pos.sen;

                            if((FINAL_POS - START_POS)>100) {
                                DZ_DIRECTION = 1 * DZ_case;
                            } else if((FINAL_POS - START_POS)<-100) {
                                DZ_DIRECTION = -1 * DZ_case;
                            } else {
                                DZ_DIRECTION = 1 * DZ_case;
                            }

                            VALVE_DZ_timer = 0;
                            DZ_index= DZ_index *2;
                            if(DZ_index >= 128) {
                                FIRST_DZ = valve_pos.ref;
                                DZ_NUM = 2;
                                Ref_Valve_Pos_Old = FIRST_DZ;
                                DZ_index = 1;
                                DZ_DIRECTION = 1;
                            }
                        }
                    } else if((DZ_case == -1 && DZ_NUM == 2) | (DZ_case == 1 && DZ_NUM == 2)) {
                        if(VALVE_DZ_timer < (int) (1.0f * (float) TMR_FREQ_5k)) {
                            Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                            //pos.ref = 0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end;
                            //CONTROL_MODE = MODE_JOINT_CONTROL;
                        } else if(VALVE_DZ_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                            START_POS = pos.sen;
                        } else if(VALVE_DZ_timer < (int) (2.0f * (float) TMR_FREQ_5k)) {
                            valve_pos.ref = Ref_Valve_Pos_Old  - DZ_case * DZ_DIRECTION * 64 / DZ_index;
                            if(valve_pos.ref <= VALVE_MIN_POS) {
                                valve_pos.ref = VALVE_MIN_POS;
                            } else if(valve_pos.ref >= VALVE_MAX_POS) {
                                valve_pos.ref = VALVE_MAX_POS;
                            }
                            VALVE_POS_CONTROL(valve_pos.ref);

                        } else if(VALVE_DZ_timer == (int) (2.0f * (float) TMR_FREQ_5k)) {
                            Vout.ref = 0.0f;
                        } else if(VALVE_DZ_timer > (int) (2.0f * (float) TMR_FREQ_5k)) {
                            Ref_Valve_Pos_Old = valve_pos.ref;
                            FINAL_POS = pos.sen;

                            if((FINAL_POS - START_POS)>100) {
                                DZ_DIRECTION = 1 * DZ_case;
                            } else if((FINAL_POS - START_POS)<-100) {
                                DZ_DIRECTION = -1 * DZ_case;
                            } else {
                                DZ_DIRECTION = -1 * DZ_case;
                            }

                            VALVE_DZ_timer = 0;
                            DZ_index= DZ_index * 2;
                            if(DZ_index >= 128) {
                                SECOND_DZ = valve_pos.ref;
                                VALVE_CENTER = (int) (0.5f * (float) (FIRST_DZ) + 0.5f * (float) (SECOND_DZ));
                                first_check = 0;
                                VALVE_DEADZONE_MINUS = (float) FIRST_DZ;
                                VALVE_DEADZONE_PLUS = (float) SECOND_DZ;

                                ROM_RESET_DATA();

                                CONTROL_UTILITY_MODE = MODE_NO_ACT;
                                DZ_index = 1;
                            }
                        }
                    } else if(DZ_case == 0 && DZ_NUM ==1) {
                        if(VALVE_DZ_timer < (int) (1.0f * (float) TMR_FREQ_5k)) {
                            Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                            //pos.ref = 0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end;
                            //CONTROL_MODE = MODE_JOINT_CONTROL;
                        } else if(VALVE_DZ_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                            START_POS = pos.sen;
                        } else if(VALVE_DZ_timer < (int) (2.0f * (float) TMR_FREQ_5k)) {
                            valve_pos.ref = Ref_Valve_Pos_Old  - DZ_DIRECTION * 64 / DZ_index;
                            if(valve_pos.ref <= VALVE_MIN_POS) {
                                valve_pos.ref = VALVE_MIN_POS;
                            } else if(valve_pos.ref >= VALVE_MAX_POS) {
                                valve_pos.ref = VALVE_MAX_POS;
                            }
                            VALVE_POS_CONTROL(valve_pos.ref);

                        } else if(VALVE_DZ_timer == (int) (2.0f * (float) TMR_FREQ_5k)) {
                            Ref_Valve_Pos_Old = valve_pos.ref;
                            FINAL_POS = pos.sen;

                            if((FINAL_POS - START_POS)>100) {
                                DZ_DIRECTION = 1;
                            } else if((FINAL_POS - START_POS)<-100) {
                                DZ_DIRECTION = -1;
                            } else {
                                DZ_DIRECTION = 1;
                            }
                            VALVE_DZ_timer = 0;
                            DZ_index= DZ_index *2;
                            if(DZ_index >= 128) {
                                FIRST_DZ = valve_pos.ref;
                                DZ_NUM = 2;
                                Ref_Valve_Pos_Old = FIRST_DZ;
                                DZ_index = 1;
                                DZ_DIRECTION = 1;
                            }
                        }
                    } else {
                        if(VALVE_DZ_timer < (int) (1.0f * (float) TMR_FREQ_5k)) {
                            Vout.ref = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                            //pos.ref = 0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end;
                            //CONTROL_MODE = MODE_JOINT_CONTROL;
                        } else if(VALVE_DZ_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                            START_POS = pos.sen;
                        } else if(VALVE_DZ_timer < (int) (2.0f * (float) TMR_FREQ_5k)) {
                            valve_pos.ref = Ref_Valve_Pos_Old  + DZ_DIRECTION * 64 / DZ_index;
                            if(valve_pos.ref <= VALVE_MIN_POS) {
                                valve_pos.ref = VALVE_MIN_POS;
                            } else if(valve_pos.ref > VALVE_MAX_POS) {
                                valve_pos.ref = VALVE_MAX_POS - 1;
                            }
                            VALVE_POS_CONTROL(valve_pos.ref);

                        } else if(VALVE_DZ_timer == (int) (2.0f * (float) TMR_FREQ_5k)) {
                            Vout.ref = 0.0f;
                        } else if(VALVE_DZ_timer > (int) (2.0f * (float) TMR_FREQ_5k)) {
                            Ref_Valve_Pos_Old = valve_pos.ref;
                            FINAL_POS = pos.sen;

                            if((FINAL_POS - START_POS)>100) {
                                DZ_DIRECTION = 1;
                            } else if((FINAL_POS - START_POS)<-100) {
                                DZ_DIRECTION = -1;
                            } else {
                                DZ_DIRECTION = 1;
                            }

                            VALVE_DZ_timer = 0;
                            DZ_index= DZ_index *2;
                            if(DZ_index >= 128) {
                                SECOND_DZ = valve_pos.ref;
                                VALVE_CENTER = (int) (0.5f * (float) (FIRST_DZ) + 0.5f * (float) (SECOND_DZ));
                                first_check = 0;
                                VALVE_DEADZONE_MINUS = (float) FIRST_DZ;
                                VALVE_DEADZONE_PLUS = (float) SECOND_DZ;

                                ROM_RESET_DATA();

                                CONTROL_UTILITY_MODE = MODE_NO_ACT;
                                DZ_index = 1;
                            }
                        }
                    }
                }
                break;
            }

            case MODE_DDV_POS_VS_FLOWRATE: {
                CONTROL_MODE = MODE_VALVE_OPEN_LOOP;
                VALVE_FR_timer = VALVE_FR_timer + 1;
                if(first_check == 0) {
                    if(VALVE_FR_timer < (int) (1.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = VALVE_VOLTAGE_LIMIT * 1000.0f;
                        //CAN_TX_PRES((int16_t) (VALVE_FR_timer), (int16_t) (6));
                    } else if(VALVE_FR_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = VALVE_VOLTAGE_LIMIT * 1000.0f;
                        pos_plus_end = pos.sen;
                        //                    CAN_TX_PRES((int16_t) (V_out), (int16_t) (7));
                    } else if(VALVE_FR_timer < (int) (2.0f * (float) TMR_FREQ_5k)) {
                        Vout.ref = -VALVE_VOLTAGE_LIMIT * 1000.0f;
                    } else if(VALVE_FR_timer == (int) (2.0f * (float) TMR_FREQ_5k)) {
                        //                    CAN_TX_PRES((int16_t) (V_out), (int16_t) (8));
                        Vout.ref = -VALVE_VOLTAGE_LIMIT * 1000.0f;
                        pos_minus_end = pos.sen;
                        first_check = 1;
                        VALVE_FR_timer = 0;
                        valve_pos.ref = (float) VALVE_CENTER;
                        ID_index = 0;
                        max_check = 0;
                        min_check = 0;
                    }
                } else {
                    if(VALVE_FR_timer < (int) (1.0f * (float) TMR_FREQ_5k)) {
                        //V_out = (float) P_GAIN_JOINT_POSITION * (0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen)/(float) ENC_PULSE_PER_POSITION;
                        pos.ref = 0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end;
                        CONTROL_MODE = MODE_JOINT_CONTROL;
                    } else if(VALVE_FR_timer == (int) (1.0f * (float) TMR_FREQ_5k)) {
                        data_num = 0;
                        valve_pos.ref = 10.0f*((float) ID_index_array[ID_index]) + (float) VALVE_CENTER;

                        VALVE_POS_CONTROL(valve_pos.ref);
                        START_POS = pos.sen;
                    } else if(VALVE_FR_timer < (int) (5.0f * (float) TMR_FREQ_5k)) {
                        valve_pos.ref = 10.0f*((float) ID_index_array[ID_index]) + (float) VALVE_CENTER;
                        VALVE_POS_CONTROL(valve_pos.ref);
                        data_num = data_num + 1;
                        if(abs(0.5f * (float) pos_plus_end + 0.5f * (float) pos_minus_end - (float) pos.sen) > 20000.0f) {
                            FINAL_POS = pos.sen;
                            one_period_end = 1;
                        }
                    } else if(VALVE_FR_timer == (int) (5.0f * (float) TMR_FREQ_5k)) {
                        FINAL_POS = pos.sen;
                        one_period_end = 1;
                        V_out = 0.0f;
                    }

                    if(one_period_end == 1) {
                        if(valve_pos.ref > VALVE_MAX_POS) {
                            max_check = 1;
                        } else if(valve_pos.ref < VALVE_MIN_POS) {
                            min_check = 1;
                        }
                        JOINT_VEL[ID_index] = (FINAL_POS - START_POS) / data_num * TMR_FREQ_5k;   //  pulse/sec

                        VALVE_FR_timer = 0;
                        one_period_end = 0;
                        ID_index= ID_index +1;
                        V_out = 0.0f;
                    }

                    if(max_check == 1 && min_check == 1) {

                        VALVE_POS_NUM = ID_index;
                        ROM_RESET_DATA();
                        ID_index = 0;
                        first_check = 0;
                        VALVE_FR_timer = 0;
                        CONTROL_UTILITY_MODE = MODE_NO_ACT;
//                        CAN_TX_PRES((int16_t) (VALVE_FR_timer), (int16_t) (6));
                    }
                }
                break;
            }

            case MODE_SYSTEM_ID: {
                freq_sysid_Iref = (double) cnt_sysid * DT_TMR3 * 3.;
                valve_pos.ref = 2500.0f * sin(2.0f * 3.14159f * freq_sysid_Iref * (double) cnt_sysid * DT_TMR3);
                CONTROL_MODE = MODE_VALVE_OPEN_LOOP;
                cnt_sysid++;
                if (freq_sysid_Iref >= 300) {
                    cnt_sysid = 0;
                    CONTROL_UTILITY_MODE = MODE_NO_ACT;
                }
                break;
            }



            default:
                break;
        }

        // CONTROL MODE ------------------------------------------------------------

        switch (CONTROL_MODE) {
            case MODE_NO_ACT: {
                V_out = 0.0f;
                break;
            }

            case MODE_VALVE_POSITION_CONTROL: {
                if (OPERATING_MODE == 5) { //SW Valve
                    VALVE_POS_CONTROL(valve_pos.ref);
                    V_out = Vout.ref;
                } else if (CURRENT_CONTROL_MODE == 0) { //PWM
                    V_out = valve_pos.ref;
                } else { 
                    I_REF = valve_pos.ref * 0.001f;
                }

                break;
            }

            case MODE_JOINT_CONTROL: {
                double torq_ref = 0.0f;
                pos.err = (pos.ref - pos.sen)/(float)(ENC_PULSE_PER_POSITION); //[mm]
                vel.err = (0.0f - vel.sen)/(float)(ENC_PULSE_PER_POSITION); //[mm/s]
                pos.err_sum += pos.err/(float) TMR_FREQ_5k; //[mm]
                
                //K & D Low Pass Filter
                float alpha_K_D = 1.0f/(1.0f + 5000.0f/(2.0f*3.14f*30.0f)); // f_cutoff : 30Hz
                K_LPF = K_LPF*(1.0f-alpha_K_D)+K_SPRING*(alpha_K_D);
                D_LPF = D_LPF*(1.0f-alpha_K_D)+D_DAMPER*(alpha_K_D);
                
                torq_ref = torq.ref + K_LPF * pos.err - D_LPF * vel.sen / ENC_PULSE_PER_POSITION; //[N]

                // torque feedback
                torq.err = torq_ref - torq.sen; //[N]
                torq.err_sum += torq.err/(float) TMR_FREQ_5k; //[N]

                if (((OPERATING_MODE&0b110)>>1) == 0 || ((OPERATING_MODE&0b110)>>1) == 1) {

                    double I_REF_POS = 0.0f;
                    double I_REF_FORCE_FB = 0.0f; // I_REF by Force Feedback
                    double I_REF_VC = 0.0f; // I_REF for velocity compensation

                    double temp_vel_pos = 0.0f;
                    double temp_vel_torq = 0.0f;
                    double wn_Pos = 2.0f * PI * 5.0f; // f_cut : 5Hz Position Control

                    if ((OPERATING_MODE & 0x01) == 0) { // Rotary Mode
                        temp_vel_pos = (0.01f * (double) P_GAIN_JOINT_POSITION * wn_Pos * pos.err + 0.01f * (double) I_GAIN_JOINT_POSITION * wn_Pos * pos.err_sum + 0.01f * (double) VELOCITY_COMP_GAIN * vel.ref / ENC_PULSE_PER_POSITION) * PI / 180.0f; // rad/s
                        //                            L when P-gain = 100, f_cut = 10Hz                                 L feedforward velocity
                    } else if ((OPERATING_MODE & 0x01) == 1) {
                        temp_vel_pos = (0.01f * (double) P_GAIN_JOINT_POSITION * wn_Pos * pos.err + 0.01f * (double) I_GAIN_JOINT_POSITION * wn_Pos * pos.err_sum + 0.01f * (double) VELOCITY_COMP_GAIN * vel.ref / ENC_PULSE_PER_POSITION); // mm/s
                        //                            L when P-gain = 100, f_cut = 10Hz                                 L feedforward velocity
                    }
                    if (temp_vel_pos > 0.0f) I_REF_POS = temp_vel_pos * ((double) PISTON_AREA_A * 0.00006f / (K_v * sqrt(2.0f * alpha3 / (alpha3 + 1.0f))));
                    else I_REF_POS = temp_vel_pos * ((double) PISTON_AREA_B * 0.00006f / (K_v * sqrt(2.0f / (alpha3 + 1.0f))));

                    // velocity compensation for torque control
                    if ((OPERATING_MODE & 0x01) == 0) { // Rotary Mode
                        I_REF_FORCE_FB = 0.001f * ((double) P_GAIN_JOINT_TORQUE * torq.err + (double) I_GAIN_JOINT_TORQUE * torq.err_sum);
                        //                temp_vel_torq = (0.01 * (double) VELOCITY_COMP_GAIN * (double) CUR_VELOCITY / (double) ENC_PULSE_PER_POSITION) * PI / 180.0; // rad/s
                        temp_vel_torq = (0.01f * (double) VELOCITY_COMP_GAIN * vel.ref / (double) ENC_PULSE_PER_POSITION) * PI / 180.0f; // rad/s
                        //                                                          L feedforward velocity
                    } else if ((OPERATING_MODE & 0x01) == 1) {
                        I_REF_FORCE_FB = 0.001f * 0.01f*((double) P_GAIN_JOINT_TORQUE * torq.err + (double) I_GAIN_JOINT_TORQUE * torq.err_sum); // Linear Actuators are more sensitive.
                        //                temp_vel_torq = (0.01 * (double) VELOCITY_COMP_GAIN * (double) CUR_VELOCITY / (double) ENC_PULSE_PER_POSITION); // mm/s
                        temp_vel_torq = (0.01f * (double) VELOCITY_COMP_GAIN * vel.ref / (double) ENC_PULSE_PER_POSITION); // mm/s
                        //                                                          L feedforward velocity
                    }
                    if (temp_vel_torq > 0.0f) I_REF_VC = temp_vel_torq * ((double) PISTON_AREA_A * 0.00006f / (K_v * sqrt(2.0f * alpha3 / (alpha3 + 1.0f))));
                    else I_REF_VC = temp_vel_torq * ((double) PISTON_AREA_B * 0.00006f / (K_v * sqrt(2.0f / (alpha3 + 1.0f))));
                    //                                                  L   velocity(rad/s or mm/s) >> I_ref(mA)
                    //            Ref_Joint_FT_dot = (Ref_Joint_FT_Nm - Ref_Joint_FT_Nm_old) / TMR_DT_5k;
                    //            Ref_Joint_FT_Nm_old = Ref_Joint_FT_Nm;

                    I_REF = (1.0f - alpha_trans) * I_REF_POS + alpha_trans * (I_REF_VC + I_REF_FORCE_FB);
                    
                    // Anti-windup for FT
                    if (I_GAIN_JOINT_TORQUE != 0) {
                        double I_MAX = 10.0f; // Maximum Current : 10mV
                        double Ka = 2.0f / ((double) I_GAIN_JOINT_TORQUE * 0.001f);
                        if (I_REF > I_MAX) {
                            double I_rem = I_REF - I_MAX;
                            I_rem = Ka*I_rem;
                            I_REF = I_MAX;
                            torq.err_sum = torq.err_sum - I_rem /(float) TMR_FREQ_5k;
                        } else if (I_REF < -I_MAX) {
                            double I_rem = I_REF - (-I_MAX);
                            I_rem = Ka*I_rem;
                            I_REF = -I_MAX;
                            torq.err_sum = torq.err_sum - I_rem /(float) TMR_FREQ_5k;
                        }
                    }

                } else {
                    float VALVE_POS_RAW_FORCE_FB = 0.0f;
                    float VALVE_POS_RAW_FORCE_FF = 0.0f;
                    float VALVE_POS_RAW = 0.0f;
                    
                    VALVE_POS_RAW_FORCE_FB = alpha_trans*(((float) P_GAIN_JOINT_TORQUE * torq.err + (float) I_GAIN_JOINT_TORQUE * torq.err_sum) * 0.01f
                                                          + DDV_JOINT_POS_FF(vel.sen))+ (1.0f-alpha_trans) * (P_GAIN_JOINT_POSITION * 0.01f * pos.err + DDV_JOINT_POS_FF(vel.ref));

                    VALVE_POS_RAW_FORCE_FF = P_GAIN_JOINT_TORQUE_FF * torq_ref * 0.001f + D_GAIN_JOINT_TORQUE_FF * (torq_ref - torq_ref_past) * 0.0001f;
                    
                    VALVE_POS_RAW = VALVE_POS_RAW_FORCE_FB + VALVE_POS_RAW_FORCE_FF;
                    
                    
                    if (VALVE_POS_RAW >= 0) {
                        valve_pos.ref = VALVE_POS_RAW + VALVE_DEADZONE_PLUS;
                    } else {
                        valve_pos.ref = VALVE_POS_RAW + VALVE_DEADZONE_MINUS;
                    }

                    if(I_GAIN_JOINT_TORQUE != 0) {
                        double Ka = 1.0f / (double) I_GAIN_JOINT_TORQUE * 100.0f;
                        if(valve_pos.ref>VALVE_MAX_POS) {
                            double valve_pos_rem = valve_pos.ref - VALVE_MAX_POS;
                            valve_pos_rem = valve_pos_rem * Ka;
                            valve_pos.ref = VALVE_MAX_POS;
                            torq.err_sum = torq.err_sum - valve_pos_rem/(float) TMR_FREQ_5k;
                        } else if(valve_pos.ref < VALVE_MIN_POS) {
                            double valve_pos_rem = valve_pos.ref - VALVE_MIN_POS;
                            valve_pos_rem = valve_pos_rem * Ka;
                            valve_pos.ref = VALVE_MIN_POS;
                            torq.err_sum = torq.err_sum - valve_pos_rem/(float) TMR_FREQ_5k;
                        }
                    }

                    VALVE_POS_CONTROL(valve_pos.ref);

//                    Vout.ref = (float) P_GAIN_JOINT_POSITION * 0.01f * ((float) pos.err);
                    V_out = (float) Vout.ref;

                }
                
                torq_ref_past = torq_ref;

                break;
            }

            case MODE_VALVE_OPEN_LOOP: {
                V_out = (float) Vout.ref;
                break;
            }

            default:
                break;
        }


        if (((OPERATING_MODE&0b110)>>1) == 0 || ((OPERATING_MODE&0b110)>>1) == 1) { //Moog Valve or KNR Valve

            ////////////////////////////////////////////////////////////////////////////
            ////////////////////////////  CURRENT CONTROL //////////////////////////////
            ////////////////////////////////////////////////////////////////////////////
            if (CURRENT_CONTROL_MODE) {
                double alpha_update_Iref = 1.0f / (1.0f + 5000.0f / (2.0f * 3.14f * 300.0f)); // f_cutoff : 500Hz
                I_REF_fil = (1.0f - alpha_update_Iref) * I_REF_fil + alpha_update_Iref*I_REF;

                I_ERR = I_REF_fil - cur.sen;
                I_ERR_INT = I_ERR_INT + (I_ERR) * 0.0002f;


                // Moog Valve Current Control Gain
                double R_model = 500.0f; // ohm
                double L_model = 1.2f;
                double w0 = 2.0f * 3.14f * 150.0f;
                double KP_I = 0.1f * L_model*w0;
                double KI_I = 0.1f * R_model*w0;

                // KNR Valve Current Control Gain
                if (((OPERATING_MODE & 0b110)>>1) == 1) { // KNR Valve
                    R_model = 163.0f; // ohm
                    L_model = 1.0f;
                    w0 = 2.0f * 3.14f * 80.0f;
                    KP_I = 1.0f * L_model*w0;
                    KI_I = 0.08f * R_model*w0;
                }

                double FF_gain = 1.0f;

                VALVE_PWM_RAW = KP_I * 2.0f * I_ERR + KI_I * 2.0f* I_ERR_INT;
                //        VALVE_PWM_RAW = VALVE_PWM_RAW + FF_gain * (R_model*I_REF); // Unit : mV
                I_REF_fil_diff = I_REF_fil - I_REF_fil_old;
                I_REF_fil_old = I_REF_fil;
//                VALVE_PWM_RAW = VALVE_PWM_RAW + FF_gain * (R_model * I_REF_fil + L_model * I_REF_fil_diff * 5000.0f); // Unit : mV
                VALVE_PWM_RAW = VALVE_PWM_RAW + FF_gain * (R_model * I_REF_fil); // Unit : mV
                double V_MAX = 12000.0f; // Maximum Voltage : 12V = 12000mV

                double Ka = 3.0f / KP_I;
                if (VALVE_PWM_RAW > V_MAX) {
                    V_rem = VALVE_PWM_RAW - V_MAX;
                    V_rem = Ka*V_rem;
                    VALVE_PWM_RAW = V_MAX;
                    I_ERR_INT = I_ERR_INT - V_rem * 0.0002f;
                } else if (VALVE_PWM_RAW < -V_MAX) {
                    V_rem = VALVE_PWM_RAW - (-V_MAX);
                    V_rem = Ka*V_rem;
                    VALVE_PWM_RAW = -V_MAX;
                    I_ERR_INT = I_ERR_INT - V_rem * 0.0002f;
                }
                Cur_Valve_Open_pulse = cur.sen / mA_PER_pulse;
            } else {
                VALVE_PWM_RAW = I_REF * mV_PER_mA;
                Cur_Valve_Open_pulse = I_REF / mA_PER_pulse;
            }

            ////////////////////////////////////////////////////////////////////////////
            /////////////////  Dead Zone Cancellation & Linearization //////////////////
            ////////////////////////////////////////////////////////////////////////////
            // Dead Zone Cancellation (Mechanical Valve dead-zone)
            if (FLAG_VALVE_DEADZONE) {
                if (VALVE_PWM_RAW > 0) VALVE_PWM_RAW = VALVE_PWM_RAW + VALVE_DEADZONE_PLUS * mV_PER_pulse; // unit: mV
                else if (VALVE_PWM_RAW < 0) VALVE_PWM_RAW = VALVE_PWM_RAW + VALVE_DEADZONE_MINUS * mV_PER_pulse; // unit: mV

                VALVE_PWM_VALVE_DZ = VALVE_PWM_RAW + (double)VALVE_CENTER * mV_PER_pulse; // unit: mV

            } else {
                VALVE_PWM_VALVE_DZ = VALVE_PWM_RAW;
            }

            // Output Voltage Linearization
            double CUR_PWM_nonlin = VALVE_PWM_VALVE_DZ; // Unit : mV
            double CUR_PWM_lin = PWM_duty_byLT(CUR_PWM_nonlin);  // -8000~8000

            // Dead Zone Cancellation (Electrical dead-zone)
            if (CUR_PWM_lin > 0) V_out = (float) (CUR_PWM_lin + 169.0f);
            else if (CUR_PWM_lin < 0) V_out = (float) (CUR_PWM_lin - 174.0f);
            else V_out = (float) (CUR_PWM_lin);
        }
        else {              //////////////////////////sw valve
            // Output Voltage Linearization
            double CUR_PWM_nonlin = V_out; // Unit : mV
            double CUR_PWM_lin = PWM_duty_byLT(CUR_PWM_nonlin);  // -8000~8000

            // Dead Zone Cancellation (Electrical dead-zone)
            if (CUR_PWM_lin > 0) V_out = (float) (CUR_PWM_lin + 169.0f);
            else if (CUR_PWM_lin < 0) V_out = (float) (CUR_PWM_lin - 174.0f);
            else V_out = (float) (CUR_PWM_lin);
        }
        
//        if(V_out > 0.0f) V_out = (float) (V_out + 169.0f);
//        else if(V_out < 0.0f) V_out = (float) (V_out - 174.0f);
//        else V_out = V_out;
    
        /*******************************************************
        ***     PWM
        ********************************************************/
        if(DIR_VALVE<0){
            V_out = -V_out;
        }
        
        if (V_out >= VALVE_VOLTAGE_LIMIT*1000.0f) {
            V_out = VALVE_VOLTAGE_LIMIT*1000.0f;
        } else if(V_out<=-VALVE_VOLTAGE_LIMIT*1000.0f) {
            V_out = -VALVE_VOLTAGE_LIMIT*1000.0f;
        }
        PWM_out= V_out/(SUPPLY_VOLTAGE*1000.0f); // Full duty : 12000.0mV

        // Saturation of output voltage to 12.0V
        if(PWM_out > 1.0f) PWM_out=1.0f;
        else if (PWM_out < -1.0f) PWM_out=-1.0f;

        if (PWM_out>0.0f) {
            dtc_v=0.0f;
            dtc_w=PWM_out;
        } else {
            dtc_v=-PWM_out;
            dtc_w=0.0f;
        }

        //pwm
        TIM4->CCR2 = (PWM_ARR)*(1.0f-dtc_v);
        TIM4->CCR1 = (PWM_ARR)*(1.0f-dtc_w);


        if (TMR2_COUNT_CAN_TX % (int) ((int) TMR_FREQ_5k/CAN_FREQ) == 0) {

            // Position, Velocity, and Torque (ID:1200)
            if (flag_data_request[0] == HIGH) {
                if ((OPERATING_MODE & 0b01) == 0) { // Rotary Actuator
                    if (SENSING_MODE == 0) {
                        CAN_TX_POSITION_FT((int16_t) (pos.sen), (int16_t) (vel.sen/10.0f), (int16_t) (torq.sen*10.0f));
                    } else if (SENSING_MODE == 1) {
                        CAN_TX_POSITION_PRESSURE((int16_t) (pos.sen), (int16_t) (vel.sen/10.0f), (int16_t) ((pres_A.sen)*5.0f), (int16_t) ((pres_B.sen)*5.0f));
                    }
                } else if ((OPERATING_MODE & 0b01) == 1) { // Linear Actuator
                    if (SENSING_MODE == 0) {
                        CAN_TX_POSITION_FT((int16_t) (pos.sen/10.0f), (int16_t) (vel.sen/256.0f), (int16_t) (torq.sen * 10.0f * (float)(TORQUE_SENSOR_PULSE_PER_TORQUE)));
                    } else if (SENSING_MODE == 1) {
                        CAN_TX_POSITION_PRESSURE((int16_t) (pos.sen/10.0f), (int16_t) (vel.sen/256.0f), (int16_t) ((pres_A.sen)*5.0f), (int16_t) ((pres_B.sen)*5.0f));
                    }
                }
            }
            if (flag_data_request[1] == HIGH) {
                //valve position
                double t_value = 0;
                if(valve_pos.ref>=(float) VALVE_CENTER) {
                    t_value = 10000.0f*((double)valve_pos.ref - (double)VALVE_CENTER)/((double)VALVE_MAX_POS - (double)VALVE_CENTER);
                } else {
                    t_value = -10000.0f*((double)valve_pos.ref - (double)VALVE_CENTER)/((double)VALVE_MIN_POS - (double)VALVE_CENTER);
                }
//                if(OPERATING_MODE==5) {
//                    if(valve_pos.ref>=(float) VALVE_CENTER) {
//                        t_value = 10000.0f*((double)value - (double)VALVE_CENTER)/((double)VALVE_MAX_POS - (double)VALVE_CENTER);
//                    } else {
//                        t_value = -10000.0f*((double)value - (double)VALVE_CENTER)/((double)VALVE_MIN_POS - (double)VALVE_CENTER);
//                    }
                    //t_value = (double) value;
//                } else if(CURRENT_CONTROL_MODE==1) {
//                    t_value = cur.sen * 1000.0f;
//                } else {
//                    t_value = V_out;
//                }
                CAN_TX_TORQUE((int16_t) (t_value)); //1300
                //CAN_TX_TORQUE((int16_t) (cur.sen * 1000.0f)); //1300
                //CAN_TX_TORQUE((int16_t) (I_REF * 1000.0f)); //1300
            }


            if (flag_data_request[2] == HIGH) {
                //CAN_TX_PRES((int16_t) (pres_A.sen), (int16_t) (pres_B.sen)); // 1400
                double t_value = 0;
                if(valve_pos.ref>=(float) VALVE_CENTER) {
                    t_value = 10000.0f*((double)valve_pos.ref - (double)VALVE_CENTER)/((double)VALVE_MAX_POS - (double)VALVE_CENTER);
                } else {
                    t_value = -10000.0f*((double)valve_pos.ref - (double)VALVE_CENTER)/((double)VALVE_MIN_POS - (double)VALVE_CENTER);
                }
                CAN_TX_PRES((int16_t) (t_value), (int16_t) (V_out)); // 1400
            }

            //If it doesn't rest, below can can not work.
            for (can_rest = 0; can_rest < 10000; can_rest++) {
                ;
            }

            if (flag_data_request[3] == HIGH) {
                //PWM
                //CAN_TX_PWM((int16_t) value); //1500
                CAN_TX_PWM((int16_t) input_NN[0] * 100.0f); //1500
            }
            //for (i = 0; i < 10000; i++) {
//                ;
//            }
            if (flag_data_request[4] == HIGH) {
                //valve position
                CAN_TX_VALVE_POSITION((int16_t) (input_NN[1] * 100.0f), (int16_t) (input_NN[2]* 100.0f), (int16_t) (input_NN[3]* 100.0f), (int16_t) (input_NN[4]* 100.0f)); //1600
            }

            // Others : Reference position, Reference FT, PWM, Current  (ID:1300)
//        if (flag_data_request[1] == HIGH) {
//            CAN_TX_SOMETHING((int) (FORCE_VREF), (int16_t) (1), (int16_t) (2), (int16_t) (3));
//        }
            //if (flag_delay_test == 1){
            //CAN_TX_PRES((int16_t) (0),(int16_t) torq_ref);
            //}

            TMR2_COUNT_CAN_TX = 0;
        }
        TMR2_COUNT_CAN_TX++;

    }
    TIM3->SR = 0x0;  // reset the status register

}