forked for unsupported target
Dependents: stm32-disco-example DISCO-F469NI_BD_SD_Card_Control
Fork of USBHOST by
Diff: USBHost/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/userdef/usb1_host_userdef.c
- Revision:
- 1:ab240722d7ef
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHost/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb1/src/userdef/usb1_host_userdef.c Wed Feb 15 10:49:44 2017 +0100 @@ -0,0 +1,778 @@ +/******************************************************************************* +* DISCLAIMER +* This software is supplied by Renesas Electronics Corporation and is only +* intended for use with Renesas products. No other uses are authorized. This +* software is owned by Renesas Electronics Corporation and is protected under +* all applicable laws, including copyright laws. +* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING +* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT +* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE +* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. +* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS +* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE +* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR +* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE +* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +* Renesas reserves the right, without notice, to make changes to this software +* and to discontinue the availability of this software. By using this software, +* you agree to the additional terms and conditions found by accessing the +* following link: +* http://www.renesas.com/disclaimer +* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. +*******************************************************************************/ +/******************************************************************************* +* File Name : usb1_host_userdef.c +* $Rev: 1116 $ +* $Date:: 2014-07-09 16:29:19 +0900#$ +* Device(s) : RZ/A1H +* Tool-Chain : +* OS : None +* H/W Platform : +* Description : RZ/A1H R7S72100 USB Sample Program +* Operation : +* Limitations : +*******************************************************************************/ + + +/******************************************************************************* +Includes <System Includes> , "Project Includes" +*******************************************************************************/ +#include <stdio.h> +#include "cmsis_os.h" +#include "r_typedefs.h" +#include "iodefine.h" +#include "devdrv_usb_host_api.h" +#include "usb1_host.h" +#include "VKRZA1H.h" /* INTC Driver Header */ +#include "usb1_host_dmacdrv.h" +#include "ohci_wrapp_RZ_A1_local.h" + + +/******************************************************************************* +Typedef definitions +*******************************************************************************/ + + +/******************************************************************************* +Macro definitions +*******************************************************************************/ +#define DUMMY_ACCESS OSTM0CNT + +/* #define CACHE_WRITEBACK */ + + +/******************************************************************************* +Imported global variables and functions (from other files) +*******************************************************************************/ +extern int32_t io_cwb(unsigned long start, unsigned long end); + + +/******************************************************************************* +Exported global variables and functions (to be accessed by other files) +*******************************************************************************/ +static void usb1_host_enable_dmac0(uint32_t src, uint32_t dst, uint32_t count, + uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc); +static void usb1_host_enable_dmac1(uint32_t src, uint32_t dst, uint32_t count, + uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc); +static void Userdef_USB_usb1_host_delay_10us_2(void); + + +/******************************************************************************* +Private global variables and functions +*******************************************************************************/ + + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_d0fifo_dmaintid +* Description : get D0FIFO DMA Interrupt ID +* Arguments : none +* Return Value : D0FIFO DMA Interrupt ID +*******************************************************************************/ +uint16_t Userdef_USB_usb1_host_d0fifo_dmaintid (void) +{ +#if(1) /* ohci_wrapp */ + return 0xFFFF; +#else + return DMAINT1_IRQn; +#endif +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_d1fifo_dmaintid +* Description : get D1FIFO DMA Interrupt ID +* Arguments : none +* Return Value : D1FIFO DMA Interrupt ID +*******************************************************************************/ +uint16_t Userdef_USB_usb1_host_d1fifo_dmaintid (void) +{ +#if(1) /* ohci_wrapp */ + return 0xFFFF; +#else + return DMAINT2_IRQn; +#endif +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_attach +* Description : Wait for the software of 1ms. +* : Alter this function according to the user's system. +* Arguments : none +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_attach (void) +{ +// printf("\n"); +// printf("channel 1 attach device\n"); +// printf("\n"); + ohciwrapp_loc_Connect(1); +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_detach +* Description : Wait for the software of 1ms. +* : Alter this function according to the user's system. +* Arguments : none +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_detach (void) +{ +// printf("\n"); +// printf("channel 1 detach device\n"); +// printf("\n"); + ohciwrapp_loc_Connect(0); +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_delay_1ms +* Description : Wait for the software of 1ms. +* : Alter this function according to the user's system. +* Arguments : none +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_delay_1ms (void) +{ + osDelay(1); +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_delay_xms +* Description : Wait for the software in the period of time specified by the +* : argument. +* : Alter this function according to the user's system. +* Arguments : uint32_t msec ; Wait Time (msec) +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_delay_xms (uint32_t msec) +{ + osDelay(msec); +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_delay_10us +* Description : Waits for software for the period specified by the argument. +* : Alter this function according to the user's system. +* Arguments : uint32_t usec ; Wait Time(x 10usec) +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_delay_10us (uint32_t usec) +{ + volatile int i; + + /* Wait 10us (Please change for your MCU) */ + for (i = 0; i < usec; ++i) + { + Userdef_USB_usb1_host_delay_10us_2(); + } +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_delay_10us_2 +* Description : Waits for software for the period specified by the argument. +* : Alter this function according to the user's system. +* Arguments : none +* Return Value : none +*******************************************************************************/ +static void Userdef_USB_usb1_host_delay_10us_2 (void) +{ + volatile int i; + volatile unsigned long tmp; + + /* Wait 1us (Please change for your MCU) */ + for (i = 0; i < 14; ++i) + { + tmp = DUMMY_ACCESS; + } +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_delay_500ns +* Description : Wait for software for 500ns. +* : Alter this function according to the user's system. +* Arguments : none +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_delay_500ns (void) +{ + volatile int i; + volatile unsigned long tmp; + + /* Wait 500ns (Please change for your MCU) */ + /* Wait 500ns I clock 266MHz */ + tmp = DUMMY_ACCESS; +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_start_dma +* Description : Enables DMA transfer on the information specified by the argument. +* : Set DMAC register by this function to enable DMA transfer. +* : After executing this function, USB module is set to start DMA +* : transfer. DMA transfer should not wait for DMA transfer complete. +* Arguments : USB_HOST_DMA_t *dma : DMA parameter +* : typedef struct{ +* : uint32_t fifo; FIFO for using +* : uint32_t buffer; Start address of transfer source/destination +* : uint32_t bytes; Transfer size(Byte) +* : uint32_t dir; Transfer direction(0:Buffer->FIFO, 1:FIFO->Buffer) +* : uint32_t size; DMA transfer size +* : } USB_HOST_DMA_t; +* : uint16_t dfacc ; 0 : cycle steal mode +* : 1 : 16byte continuous mode +* : 2 : 32byte continuous mode +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_start_dma (USB_HOST_DMA_t * dma, uint16_t dfacc) +{ + uint32_t trncount; + uint32_t src; + uint32_t dst; + uint32_t size; + uint32_t dir; +#ifdef CACHE_WRITEBACK + uint32_t ptr; +#endif + + trncount = dma->bytes; + dir = dma->dir; + + if (dir == USB_HOST_FIFO2BUF) + { + /* DxFIFO determination */ + dst = dma->buffer; +#ifndef __USB_HOST_DF_ACC_ENABLE__ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + src = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + src = (uint32_t)(&USB201.D1FIFO.UINT32); + } + size = dma->size; + + if (size == 0) + { + src += 3; /* byte access */ + } + else if (size == 1) + { + src += 2; /* short access */ + } + else + { + /* Do Nothing */ + } +#else + size = dma->size; + + if (size == 2) + { + /* 32bit access */ + if (dfacc == 2) + { + /* 32byte access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + src = (uint32_t)(&USB201.D0FIFOB0); + } + else + { + src = (uint32_t)(&USB201.D1FIFOB0); + } + } + else if (dfacc == 1) + { + /* 16byte access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + src = (uint32_t)(&USB201.D0FIFOB0); + } + else + { + src = (uint32_t)(&USB201.D1FIFOB0); + } + } + else + { + /* normal access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + src = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + src = (uint32_t)(&USB201.D1FIFO.UINT32); + } + } + } + else if (size == 1) + { + /* 16bit access */ + dfacc = 0; /* force normal access */ + + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + src = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + src = (uint32_t)(&USB201.D1FIFO.UINT32); + } + src += 2; /* short access */ + } + else + { + /* 8bit access */ + dfacc = 0; /* force normal access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + src = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + src = (uint32_t)(&USB201.D1FIFO.UINT32); + } + src += 3; /* byte access */ + } +#endif + } + else + { + /* DxFIFO determination */ + src = dma->buffer; +#ifndef __USB_HOST_DF_ACC_ENABLE__ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + dst = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + dst = (uint32_t)(&USB201.D1FIFO.UINT32); + } + size = dma->size; + + if (size == 0) + { + dst += 3; /* byte access */ + } + else if (size == 1) + { + dst += 2; /* short access */ + } + else + { + /* Do Nothing */ + } +#else + size = dma->size; + if (size == 2) + { + /* 32bit access */ + if (dfacc == 2) + { + /* 32byte access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + dst = (uint32_t)(&USB201.D0FIFOB0); + } + else + { + dst = (uint32_t)(&USB201.D1FIFOB0); + } + } + else if (dfacc == 1) + { + /* 16byte access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + dst = (uint32_t)(&USB201.D0FIFOB0); + } + else + { + dst = (uint32_t)(&USB201.D1FIFOB0); + } + } + else + { + /* normal access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + dst = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + dst = (uint32_t)(&USB201.D1FIFO.UINT32); + } + } + } + else if (size == 1) + { + /* 16bit access */ + dfacc = 0; /* force normal access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + dst = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + dst = (uint32_t)(&USB201.D1FIFO.UINT32); + } + dst += 2; /* short access */ + } + else + { + /* 8bit access */ + dfacc = 0; /* force normal access */ + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + dst = (uint32_t)(&USB201.D0FIFO.UINT32); + } + else + { + dst = (uint32_t)(&USB201.D1FIFO.UINT32); + } + dst += 3; /* byte access */ + } +#endif + } + +#ifdef CACHE_WRITEBACK + ptr = (uint32_t)dma->buffer; + if ((ptr & 0x20000000ul) == 0) + { + io_cwb((uint32_t)ptr,(uint32_t)(ptr)+trncount); + } +#endif + + if (dma->fifo == USB_HOST_D0FIFO_DMA) + { + usb1_host_enable_dmac0(src, dst, trncount, size, dir, dma->fifo, dfacc); + } + else + { + usb1_host_enable_dmac1(src, dst, trncount, size, dir, dma->fifo, dfacc); + } +} + +/******************************************************************************* +* Function Name: usb1_host_enable_dmac0 +* Description : Enables DMA transfer on the information specified by the argument. +* Arguments : uint32_t src : src address +* : uint32_t dst : dst address +* : uint32_t count : transfer byte +* : uint32_t size : transfer size +* : uint32_t dir : direction +* : uint32_t fifo : FIFO(D0FIFO or D1FIFO) +* : uint16_t dfacc : 0 : normal access +* : : 1 : 16byte access +* : : 2 : 32byte access +* Return Value : none +*******************************************************************************/ +static void usb1_host_enable_dmac0 (uint32_t src, uint32_t dst, uint32_t count, + uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc) +{ + dmac_transinfo_t trans_info; + uint32_t request_factor = 0; + int32_t ret; + + /* ==== Variable setting for DMAC initialization ==== */ + trans_info.src_addr = (uint32_t)src; /* Start address of transfer source */ + trans_info.dst_addr = (uint32_t)dst; /* Start address of transfer destination */ + trans_info.count = (uint32_t)count; /* Total byte count to be transferred */ +#ifndef __USB_HOST_DF_ACC_ENABLE__ + if (size == 0) + { + trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */ + } + else if (size == 1) + { + trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */ + } + else if (size == 2) + { + trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */ + } + else + { +// printf("size error!!\n"); + } +#else + if (dfacc == 2) + { + /* 32byte access */ + trans_info.src_size = DMAC_TRANS_SIZE_256; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_256; /* Transfer destination transfer size */ + } + else if (dfacc == 1) + { + /* 16byte access */ + trans_info.src_size = DMAC_TRANS_SIZE_128; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_128; /* Transfer destination transfer size */ + } + else + { + /* normal access */ + if (size == 0) + { + trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */ + } + else if (size == 1) + { + trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */ + } + else if (size == 2) + { + trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */ + } + else + { +// printf("size error!!\n"); + } + } +#endif + + if (dir == USB_HOST_FIFO2BUF) + { + request_factor = DMAC_REQ_USB1_DMA0_RX; /* USB_0 channel 0 receive FIFO full */ + trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer source address */ + trans_info.daddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer destination address */ + } + else if (dir == USB_HOST_BUF2FIFO) + { + request_factor = DMAC_REQ_USB1_DMA0_TX; /* USB_0 channel 0 receive FIFO empty */ + trans_info.saddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer source address */ + trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer destination address */ + } + else + { + /* Do Nothing */ + } + + /* ==== DMAC initialization ==== */ + usb1_host_DMAC3_PeriReqInit((const dmac_transinfo_t *)&trans_info, + DMAC_MODE_REGISTER, + DMAC_SAMPLE_SINGLE, + request_factor, + 0); /* Don't care DMAC_REQ_REQD is setting in usb1_host_DMAC3_PeriReqInit() */ + + /* ==== DMAC startup ==== */ + ret = usb1_host_DMAC3_Open(DMAC_REQ_MODE_PERI); + + if (ret != 0) + { +// printf("DMAC3 Open error!!\n"); + } + + return; +} + +/******************************************************************************* +* Function Name: usb1_host_enable_dmac1 +* Description : Enables DMA transfer on the information specified by the argument. +* Arguments : uint32_t src : src address +* : uint32_t dst : dst address +* : uint32_t count : transfer byte +* : uint32_t size : transfer size +* : uint32_t dir : direction +* : uint32_t fifo : FIFO(D0FIFO or D1FIFO) +* : uint16_t dfacc : 0 : normal access +* : : 1 : 16byte access +* : : 2 : 32byte access +* Return Value : none +*******************************************************************************/ +static void usb1_host_enable_dmac1 (uint32_t src, uint32_t dst, uint32_t count, + uint32_t size, uint32_t dir, uint32_t fifo, uint16_t dfacc) +{ + dmac_transinfo_t trans_info; + uint32_t request_factor = 0; + int32_t ret; + + /* ==== Variable setting for DMAC initialization ==== */ + trans_info.src_addr = (uint32_t)src; /* Start address of transfer source */ + trans_info.dst_addr = (uint32_t)dst; /* Start address of transfer destination */ + trans_info.count = (uint32_t)count; /* Total byte count to be transferred */ +#ifndef __USB_HOST_DF_ACC_ENABLE__ + if (size == 0) + { + trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */ + } + else if (size == 1) + { + trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */ + } + else if (size == 2) + { + trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */ + } + else + { +// printf("size error!!\n"); + } +#else + if (dfacc == 2) + { + /* 32byte access */ + trans_info.src_size = DMAC_TRANS_SIZE_256; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_256; /* Transfer destination transfer size */ + } + else if (dfacc == 1) + { + /* 16byte access */ + trans_info.src_size = DMAC_TRANS_SIZE_128; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_128; /* Transfer destination transfer size */ + } + else + { + /* normal access */ + if (size == 0) + { + trans_info.src_size = DMAC_TRANS_SIZE_8; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_8; /* Transfer destination transfer size */ + } + else if (size == 1) + { + trans_info.src_size = DMAC_TRANS_SIZE_16; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_16; /* Transfer destination transfer size */ + } + else if (size == 2) + { + trans_info.src_size = DMAC_TRANS_SIZE_32; /* Transfer source transfer size */ + trans_info.dst_size = DMAC_TRANS_SIZE_32; /* Transfer destination transfer size */ + } + else + { +// printf("size error!!\n"); + } + } +#endif + + if (dir == USB_HOST_FIFO2BUF) + { + request_factor =DMAC_REQ_USB1_DMA1_RX; /* USB_0 channel 0 receive FIFO full */ + trans_info.saddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer source address */ + trans_info.daddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer destination address */ + } + else if (dir == USB_HOST_BUF2FIFO) + { + request_factor =DMAC_REQ_USB1_DMA1_TX; /* USB_0 channel 0 receive FIFO empty */ + trans_info.saddr_dir = DMAC_TRANS_ADR_INC; /* Count direction of transfer source address */ + trans_info.daddr_dir = DMAC_TRANS_ADR_NO_INC; /* Count direction of transfer destination address */ + } + else + { + /* Do Nothing */ + } + + /* ==== DMAC initialization ==== */ + usb1_host_DMAC4_PeriReqInit((const dmac_transinfo_t *)&trans_info, + DMAC_MODE_REGISTER, + DMAC_SAMPLE_SINGLE, + request_factor, + 0); /* Don't care DMAC_REQ_REQD is setting in usb1_host_DMAC4_PeriReqInit() */ + + /* ==== DMAC startup ==== */ + ret = usb1_host_DMAC4_Open(DMAC_REQ_MODE_PERI); + + if (ret != 0) + { +// printf("DMAC4 Open error!!\n"); + } + + return; +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_stop_dma0 +* Description : Disables DMA transfer. +* Arguments : none +* Return Value : uint32_t return Transfer Counter register(DMATCRn) value +* : regarding to the bus width. +* Notice : This function should be executed to DMAC executed at the time +* : of specification of D0_FIF0_DMA in dma->fifo. +*******************************************************************************/ +uint32_t Userdef_USB_usb1_host_stop_dma0 (void) +{ + uint32_t remain; + + /* ==== DMAC release ==== */ + usb1_host_DMAC3_Close(&remain); + + return remain; +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_stop_dma1 +* Description : Disables DMA transfer. +* : This function should be executed to DMAC executed at the time +* : of specification of D1_FIF0_DMA in dma->fifo. +* Arguments : none +* Return Value : uint32_t return Transfer Counter register(DMATCRn) value +* : regarding to the bus width. +*******************************************************************************/ +uint32_t Userdef_USB_usb1_host_stop_dma1 (void) +{ + uint32_t remain; + + /* ==== DMAC release ==== */ + usb1_host_DMAC4_Close(&remain); + + return remain; +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_notice +* Description : Notice of USER +* Arguments : const char *format +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_notice (const char * format) +{ +// printf(format); + + return; +} + +/******************************************************************************* +* Function Name: Userdef_USB_usb1_host_user_rdy +* Description : This function notify a user and wait for trigger +* Arguments : const char *format +* : uint16_t data +* Return Value : none +*******************************************************************************/ +void Userdef_USB_usb1_host_user_rdy (const char * format, uint16_t data) +{ +// printf(format, data); + getchar(); + + return; +} + +/* End of File */