forked for unsupported target
Dependents: stm32-disco-example DISCO-F469NI_BD_SD_Card_Control
Fork of USBHOST by
Diff: USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb1/src/host/usb1_host_drv_api.c
- Revision:
- 1:ab240722d7ef
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb1/src/host/usb1_host_drv_api.c Wed Feb 15 10:49:44 2017 +0100 @@ -0,0 +1,889 @@ +/******************************************************************************* +* DISCLAIMER +* This software is supplied by Renesas Electronics Corporation and is only +* intended for use with Renesas products. No other uses are authorized. This +* software is owned by Renesas Electronics Corporation and is protected under +* all applicable laws, including copyright laws. +* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING +* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT +* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE +* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. +* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS +* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE +* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR +* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE +* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +* Renesas reserves the right, without notice, to make changes to this software +* and to discontinue the availability of this software. By using this software, +* you agree to the additional terms and conditions found by accessing the +* following link: +* http://www.renesas.com/disclaimer +* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved. +*******************************************************************************/ +/******************************************************************************* +* File Name : usb1_host_drv_api.c +* $Rev: 1116 $ +* $Date:: 2014-07-09 16:29:19 +0900#$ +* Device(s) : RZ/A1H +* Tool-Chain : +* OS : None +* H/W Platform : +* Description : RZ/A1H R7S72100 USB Sample Program +* Operation : +* Limitations : +*******************************************************************************/ + + +/******************************************************************************* +Includes <System Includes> , "Project Includes" +*******************************************************************************/ +#include "usb1_host.h" +#include "dev_drv.h" + + +/******************************************************************************* +Typedef definitions +*******************************************************************************/ + + +/******************************************************************************* +Macro definitions +*******************************************************************************/ + + +/******************************************************************************* +Imported global variables and functions (from other files) +*******************************************************************************/ + + +/******************************************************************************* +Exported global variables and functions (to be accessed by other files) +*******************************************************************************/ +static void usb1_host_resetEP(USB_HOST_CFG_PIPETBL_t *tbl); + + +/******************************************************************************* +Private global variables and functions +*******************************************************************************/ + + +/******************************************************************************* +* Function Name: usb1_api_host_init +* Description : Initializes USB module in the USB host mode. +* : USB connection is executed when executing this function in +* : the states that USB device isconnected to the USB port. +* Arguments : uint8_t int_level : USB Module interrupt level +* : USBU16 mode : USB_HOST_HIGH_SPEED +* : USB_HOST_FULL_SPEED +* : uint16_t clockmode : USB Clock mode +* Return Value : USB detach or attach +* : USB_HOST_ATTACH +* : USB_HOST_DETACH +*******************************************************************************/ +uint16_t usb1_api_host_init (uint8_t int_level, uint16_t mode, uint16_t clockmode) +{ + uint16_t connect; + volatile uint8_t dummy_buf; + + CPG.STBCR7 &= 0xfc; /*The clock of USB0/1 modules is permitted */ + dummy_buf = CPG.STBCR7; /* (Dummy read) */ + + g_usb1_host_SupportUsbDeviceSpeed = mode; + + usb1_host_setting_interrupt(int_level); + usb1_host_reset_module(clockmode); + + g_usb1_host_bchg_flag = USB_HOST_NO; + g_usb1_host_detach_flag = USB_HOST_NO; + g_usb1_host_attach_flag = USB_HOST_NO; + + g_usb1_host_driver_state = USB_HOST_DRV_DETACHED; + g_usb1_host_default_max_packet[USB_HOST_DEVICE_0] = 64; + + usb1_host_InitModule(); + + connect = usb1_host_CheckAttach(); + + if (connect == USB_HOST_ATTACH) + { + g_usb1_host_attach_flag = USB_HOST_YES; + } + else + { + usb1_host_UsbDetach2(); + } + + return connect; +} + +#if(1) /* ohci_wrapp */ +#else +/******************************************************************************* +* Function Name: usb1_api_host_enumeration +* Description : Initializes USB module in the USB host mode. +* : USB connection is executed when executing this function in +* : the states that USB device isconnected to the USB port. +* Arguments : uint16_t devadr : device address +* Return Value : DEVDRV_USBH_DETACH_ERR : device detach +* : DEVDRV_SUCCESS : device enumeration success +* : DEVDRV_ERROR : device enumeration error +*******************************************************************************/ +int32_t usb1_api_host_enumeration (uint16_t devadr) +{ + int32_t ret; + uint16_t driver_sts; + + g_usb1_host_setUsbAddress = devadr; + + while (1) + { + driver_sts = usb1_api_host_GetUsbDeviceState(); + + if (driver_sts == USB_HOST_DRV_DETACHED) + { + ret = DEVDRV_USBH_DETACH_ERR; + break; + } + else if (driver_sts == USB_HOST_DRV_CONFIGURED) + { + ret = DEVDRV_SUCCESS; + break; + } + else if (driver_sts == USB_HOST_DRV_STALL) + { + ret = DEVDRV_ERROR; + break; + } + else if (driver_sts == USB_HOST_DRV_NORES) + { + ret = DEVDRV_ERROR; + break; + } + else + { + /* Do Nothing */ + } + } + + if (driver_sts == USB_HOST_DRV_NORES) + { + while (1) + { + driver_sts = usb1_api_host_GetUsbDeviceState(); + + if (driver_sts == USB_HOST_DRV_DETACHED) + { + break; + } + } + } + + return ret; +} + +/******************************************************************************* +* Function Name: usb1_api_host_detach +* Description : USB detach routine +* Arguments : none +* Return Value : USB_HOST_DETACH : USB detach +* : USB_HOST_ATTACH : USB attach +* : DEVDRV_ERROR : error +*******************************************************************************/ +int32_t usb1_api_host_detach (void) +{ + int32_t ret; + uint16_t driver_sts; + + while (1) + { + driver_sts = usb1_api_host_GetUsbDeviceState(); + + if (driver_sts == USB_HOST_DRV_DETACHED) + { + ret = USB_HOST_DETACH; + break; + } + else if (driver_sts == USB_HOST_DRV_CONFIGURED) + { + ret = USB_HOST_ATTACH; + break; + } + else if (driver_sts == USB_HOST_DRV_STALL) + { + ret = DEVDRV_ERROR; + break; + } + else if (driver_sts == USB_HOST_DRV_NORES) + { + ret = DEVDRV_ERROR; + break; + } + else + { + /* Do Nothing */ + } + } + + if (driver_sts == USB_HOST_DRV_NORES) + { + while (1) + { + driver_sts = usb1_api_host_GetUsbDeviceState(); + + if (driver_sts == USB_HOST_DRV_DETACHED) + { + break; + } + } + } + + return ret; +} + +/******************************************************************************* +* Function Name: usb1_api_host_data_in +* Description : Executes USB transfer as data-in in the argument specified pipe. +* Arguments : uint16_t devadr ; device address +* : uint16_t Pipe ; Pipe Number +* : uint32_t Size ; Data Size +* : uint8_t *data_buf ; Data data_buf Address +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_data_in (uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t * data_buf) +{ + int32_t ret; + + if (Pipe == USB_HOST_PIPE0) + { + return DEVDRV_ERROR; + } + + if (RZA_IO_RegRead_16(&g_usb1_host_pipemaxp[Pipe], USB_PIPEMAXP_DEVSEL_SHIFT, USB_PIPEMAXP_DEVSEL) != devadr) + { + return DEVDRV_ERROR; + } + + if (RZA_IO_RegRead_16(&g_usb1_host_pipecfg[Pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 1) + { + return DEVDRV_ERROR; + } + + if (g_usb1_host_pipe_status[Pipe] == USB_HOST_PIPE_IDLE) + { + usb1_host_start_receive_transfer(Pipe, Size, data_buf); + } + else + { + return DEVDRV_ERROR; /* Now pipe is busy */ + } + + /* waiting for completing routine */ + do + { + if (g_usb1_host_detach_flag == USB_HOST_YES) + { + break; + } + + if ((g_usb1_host_pipe_status[Pipe] != USB_HOST_PIPE_IDLE) && (g_usb1_host_pipe_status[Pipe] != USB_HOST_PIPE_WAIT)) + { + break; + } + + } while (1); + + if (g_usb1_host_detach_flag == USB_HOST_YES) + { + return DEVDRV_USBH_DETACH_ERR; + } + + switch (g_usb1_host_pipe_status[Pipe]) + { + case USB_HOST_PIPE_DONE: + ret = DEVDRV_SUCCESS; + break; + + case USB_HOST_PIPE_STALL: + ret = DEVDRV_USBH_STALL; + break; + + case USB_HOST_PIPE_NORES: + ret = DEVDRV_USBH_COM_ERR; + break; + + default: + ret = DEVDRV_ERROR; + break; + } + + usb1_host_stop_transfer(Pipe); + + g_usb1_host_pipe_status[Pipe] = USB_HOST_PIPE_IDLE; + + return ret; +} + +/******************************************************************************* +* Function Name: usb1_api_host_data_out +* Description : Executes USB transfer as data-out in the argument specified pipe. +* Arguments : uint16_t devadr ; device address +* : uint16_t Pipe ; Pipe Number +* : uint32_t Size ; Data Size +* : uint8_t *data_buf ; Data data_buf Address +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_data_out (uint16_t devadr, uint16_t Pipe, uint32_t Size, uint8_t * data_buf) +{ + int32_t ret; + + if (Pipe == USB_HOST_PIPE0) + { + return DEVDRV_ERROR; + } + + if (RZA_IO_RegRead_16(&g_usb1_host_pipemaxp[Pipe], USB_PIPEMAXP_DEVSEL_SHIFT, USB_PIPEMAXP_DEVSEL) != devadr) + { + return DEVDRV_ERROR; + } + + if (RZA_IO_RegRead_16(&g_usb1_host_pipecfg[Pipe], USB_PIPECFG_DIR_SHIFT, USB_PIPECFG_DIR) == 0) + { + return DEVDRV_ERROR; + } + + if (g_usb1_host_pipe_status[Pipe] == USB_HOST_PIPE_IDLE) + { + usb1_host_start_send_transfer(Pipe, Size, data_buf); + } + else + { + return DEVDRV_ERROR; /* Now pipe is busy */ + } + + /* waiting for completing routine */ + do + { + if (g_usb1_host_detach_flag == USB_HOST_YES) + { + break; + } + + if ((g_usb1_host_pipe_status[Pipe] != USB_HOST_PIPE_IDLE) && (g_usb1_host_pipe_status[Pipe] != USB_HOST_PIPE_WAIT)) + { + break; + } + + } while (1); + + if (g_usb1_host_detach_flag == USB_HOST_YES) + { + return DEVDRV_USBH_DETACH_ERR; + } + + switch (g_usb1_host_pipe_status[Pipe]) + { + case USB_HOST_PIPE_DONE: + ret = DEVDRV_SUCCESS; + break; + + case USB_HOST_PIPE_STALL: + ret = DEVDRV_USBH_STALL; + break; + + case USB_HOST_PIPE_NORES: + ret = DEVDRV_USBH_COM_ERR; + break; + + default: + ret = DEVDRV_ERROR; + break; + } + + usb1_host_stop_transfer(Pipe); + + g_usb1_host_pipe_status[Pipe] = USB_HOST_PIPE_IDLE; + + return ret; +} + +/******************************************************************************* +* Function Name: usb1_api_host_control_transfer +* Description : Executes USB control transfer. +* Arguments : uint16_t devadr ; device address +* : uint16_t Req ; bmRequestType & bRequest +* : uint16_t Val ; wValue +* : uint16_t Indx ; wIndex +* : uint16_t Len ; wLength +* : uint8_t *buf ; Buffer +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_USBH_DETACH_ERR ; device detach +* : DEVDRV_USBH_CTRL_COM_ERR ; device no response +* : DEVDRV_USBH_STALL ; STALL +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_control_transfer (uint16_t devadr, uint16_t Req, uint16_t Val, uint16_t Indx, + uint16_t Len, uint8_t * Buf) +{ + int32_t ret; + + do + { + ret = usb1_host_CtrlTransStart(devadr, Req, Val, Indx, Len, Buf); + + if (ret == DEVDRV_SUCCESS) + { + if (g_usb1_host_detach_flag == USB_HOST_YES) + { + break; + } + + if ((g_usb1_host_pipe_status[USB_HOST_PIPE0] != USB_HOST_PIPE_IDLE) + && (g_usb1_host_pipe_status[USB_HOST_PIPE0] != USB_HOST_PIPE_WAIT)) + { + break; + } + } + else + { + return DEVDRV_ERROR; + } + } while (1); + + if (g_usb1_host_detach_flag == USB_HOST_YES) + { + return DEVDRV_USBH_DETACH_ERR; + } + + switch (g_usb1_host_pipe_status[USB_HOST_PIPE0]) + { + case USB_HOST_PIPE_DONE: + ret = DEVDRV_SUCCESS; + break; + + case USB_HOST_PIPE_STALL: + ret = DEVDRV_USBH_STALL; + break; + + case USB_HOST_PIPE_NORES: + ret = DEVDRV_USBH_CTRL_COM_ERR; + break; + + default: + ret = DEVDRV_ERROR; + break; + } + + g_usb1_host_pipe_status[USB_HOST_PIPE0] = USB_HOST_PIPE_IDLE; + + return ret; +} + +/******************************************************************************* +* Function Name: usb1_api_host_set_endpoint +* Description : Sets end point on the information specified in the argument. +* Arguments : uint16_t devadr ; device address +* : uint8_t *configdescriptor ; device configration descriptor +* : USB_HOST_CFG_PIPETBL_t *user_table ; pipe table +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_set_endpoint (uint16_t devadr, USB_HOST_CFG_PIPETBL_t * user_table, uint8_t * configdescriptor) +{ + uint16_t ret; + uint32_t end_point; + uint32_t offset; + uint32_t totalLength; + USB_HOST_CFG_PIPETBL_t * pipe_table; + + /* End Point Search */ + end_point = 0; + offset = configdescriptor[0]; + totalLength = (uint16_t)(configdescriptor[2] + ((uint16_t)configdescriptor[3] << 8)); + + do + { + if (configdescriptor[offset + 1] == USB_HOST_ENDPOINT_DESC) + { + pipe_table = &user_table[end_point]; + + if (pipe_table->pipe_number == 0xffff) + { + break; + } + + ret = usb1_api_host_SetEndpointTable(devadr, pipe_table, (uint8_t *)&configdescriptor[offset]); + + if ((ret != USB_HOST_PIPE_IN) && (ret != USB_HOST_PIPE_OUT)) + { + return DEVDRV_ERROR; + } + + ++end_point; + } + + /* Next End Point Search */ + offset += configdescriptor[offset]; + + } while (offset < totalLength); + + return DEVDRV_SUCCESS; +} + +/******************************************************************************* +* Function Name: usb1_api_host_clear_endpoint +* Description : Clears the pipe definition table specified in the argument. +* Arguments : uint16_t pipe_sel : Pipe Number +* : USB_HOST_CFG_PIPETBL_t *user_table : pipe table +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_clear_endpoint (USB_HOST_CFG_PIPETBL_t * user_table) +{ + uint16_t pipe; + + for (pipe = USB_HOST_PIPE0; pipe <= USB_HOST_MAX_PIPE_NO; ++pipe) + { + if (user_table->pipe_number == 0xffff) + { + break; + } + user_table->pipe_cfg &= (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD); + user_table->pipe_max_pktsize = 0; + user_table->pipe_cycle = 0; + + user_table++; + } + + return DEVDRV_SUCCESS; +} + +/******************************************************************************* +* Function Name: usb1_api_host_clear_endpoint_pipe +* Description : Clears the pipe definition table specified in the argument. +* Arguments : USB_HOST_CFG_PIPETBL_t *user_table : pipe table +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_clear_endpoint_pipe (uint16_t pipe_sel, USB_HOST_CFG_PIPETBL_t * user_table) +{ + uint16_t pipe; + + for (pipe = USB_HOST_PIPE0; pipe <= USB_HOST_MAX_PIPE_NO; ++pipe) + { + if (user_table->pipe_number == 0xffff) + { + break; + } + + if (user_table->pipe_number == pipe_sel) + { + user_table->pipe_cfg &= (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD); + user_table->pipe_max_pktsize = 0; + user_table->pipe_cycle = 0; + break; + } + + user_table++; + } + + return DEVDRV_SUCCESS; +} +#endif + +/******************************************************************************* +* Function Name: usb1_api_host_SetEndpointTable +* Description : Sets the end point on the information specified by the argument. +* Arguments : uint16_t devadr : device address +* : USB_HOST_CFG_PIPETBL_t *user_table : pipe table +* : uint8_t *Table : Endpoint descriptor +* Return Value : USB_HOST_DIR_H_IN ; IN endpoint +* : USB_HOST_DIR_H_OUT ; OUT endpoint +* : USB_END_POINT_ERROR ; error +*******************************************************************************/ +uint16_t usb1_api_host_SetEndpointTable (uint16_t devadr, USB_HOST_CFG_PIPETBL_t * user_table, uint8_t * Table) +{ + uint16_t PipeCfg; + uint16_t PipeMaxp; + uint16_t pipe_number; + uint16_t ret; + uint16_t ret_flag = 0; // avoid warning. + + pipe_number = user_table->pipe_number; + + if (Table[1] != USB_HOST_ENDPOINT_DESC) + { + return USB_END_POINT_ERROR; + } + + switch (Table[3] & USB_HOST_EP_TYPE) + { + case USB_HOST_EP_CNTRL: + ret_flag = USB_END_POINT_ERROR; + break; + + case USB_HOST_EP_ISO: + if ((pipe_number != USB_HOST_PIPE1) && (pipe_number != USB_HOST_PIPE2)) + { + return USB_END_POINT_ERROR; + } + + PipeCfg = USB_HOST_ISO; + break; + + case USB_HOST_EP_BULK: + if ((pipe_number < USB_HOST_PIPE1) || (pipe_number > USB_HOST_PIPE5)) + { + return USB_END_POINT_ERROR; + } + + PipeCfg = USB_HOST_BULK; + break; + + case USB_HOST_EP_INT: + if ((pipe_number < USB_HOST_PIPE6) || (pipe_number > USB_HOST_PIPE9)) + { + return USB_END_POINT_ERROR; + } + + PipeCfg = USB_HOST_INTERRUPT; + break; + + default: + ret_flag = USB_END_POINT_ERROR; + break; + } + + if (ret_flag == USB_END_POINT_ERROR) + { + return ret_flag; + } + + /* Set pipe configuration table */ + if ((Table[2] & USB_HOST_EP_DIR_MASK) == USB_HOST_EP_IN) /* IN(receive) */ + { + if (PipeCfg == USB_HOST_ISO) + { + /* Transfer Type is ISO*/ + PipeCfg |= USB_HOST_DIR_H_IN; + + switch (user_table->fifo_port) + { + case USB_HOST_CUSE: + case USB_HOST_D0USE: + case USB_HOST_D1USE: + case USB_HOST_D0DMA: + case USB_HOST_D1DMA: + PipeCfg |= (uint16_t)(user_table->pipe_cfg & USB_HOST_DBLBFIELD); + break; + + default: + ret_flag = USB_END_POINT_ERROR; + break; + } + + if (ret_flag == USB_END_POINT_ERROR) + { + return ret_flag; + } + } + else + { + /* Transfer Type is BULK or INT */ + PipeCfg |= (USB_HOST_SHTNAKON | USB_HOST_DIR_H_IN); /* Compulsory SHTNAK */ + + switch (user_table->fifo_port) + { + case USB_HOST_CUSE: + case USB_HOST_D0USE: + case USB_HOST_D1USE: + PipeCfg |= (uint16_t)(user_table->pipe_cfg & (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD)); + break; + + case USB_HOST_D0DMA: + case USB_HOST_D1DMA: + PipeCfg |= (uint16_t)(user_table->pipe_cfg & (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD)); +#ifdef __USB_DMA_BFRE_ENABLE__ + /* this routine cannnot be perfomred if read operation is executed in buffer size */ + PipeCfg |= USB_HOST_BFREON; +#endif + break; + + default: + ret_flag = USB_END_POINT_ERROR; + break; + } + + if (ret_flag == USB_END_POINT_ERROR) + { + return ret_flag; + } + } + ret = USB_HOST_PIPE_IN; + } + else /* OUT(send) */ + { + if (PipeCfg == USB_HOST_ISO) + { + /* Transfer Type is ISO*/ + PipeCfg |= (uint16_t)(user_table->pipe_cfg & USB_HOST_DBLBFIELD); + } + else + { + /* Transfer Type is BULK or INT */ + PipeCfg |= (uint16_t)(user_table->pipe_cfg & (USB_HOST_DBLBFIELD | USB_HOST_CNTMDFIELD)); + } + PipeCfg |= USB_HOST_DIR_H_OUT; + ret = USB_HOST_PIPE_OUT; + } + + switch (user_table->fifo_port) + { + case USB_HOST_CUSE: + g_usb1_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_CFIFO_USE; + break; + + case USB_HOST_D0USE: + g_usb1_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D0FIFO_USE; + break; + + case USB_HOST_D1USE: + g_usb1_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D1FIFO_USE; + break; + + case USB_HOST_D0DMA: + g_usb1_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D0FIFO_DMA; + break; + + case USB_HOST_D1DMA: + g_usb1_host_PipeTbl[pipe_number] = (uint16_t)USB_HOST_D1FIFO_DMA; + break; + + default: + ret_flag = USB_END_POINT_ERROR; + break; + } + + if (ret_flag == USB_END_POINT_ERROR) + { + return ret_flag; + } + + /* Endpoint number set */ + PipeCfg |= (uint16_t)(Table[2] & USB_HOST_EP_NUM_MASK); + g_usb1_host_PipeTbl[pipe_number] |= (uint16_t)(Table[2] & USB_HOST_EP_NUM_MASK); + + /* Max packet size set */ + PipeMaxp = (uint16_t)((uint16_t)Table[4] | (uint16_t)((uint16_t)Table[5] << 8)); + + if (PipeMaxp == 0u) + { + return USB_END_POINT_ERROR; + } + + /* Set device address */ + PipeMaxp |= (uint16_t)(devadr << 12); + + user_table->pipe_cfg = PipeCfg; + user_table->pipe_max_pktsize = PipeMaxp; + + usb1_host_resetEP(user_table); + + return ret; +} + +/******************************************************************************* +* Function Name: usb1_host_resetEP +* Description : Sets the end point on the information specified by the argument. +* Arguments : USB_HOST_CFG_PIPETBL_t *tbl : pipe table +* Return Value : none +*******************************************************************************/ +static void usb1_host_resetEP (USB_HOST_CFG_PIPETBL_t * tbl) +{ + + uint16_t pipe; + + /* Host pipe */ + /* The pipe number of pipe definition table is obtained */ + pipe = (uint16_t)(tbl->pipe_number & USB_HOST_BITCURPIPE); /* Pipe Number */ + + /* FIFO port access pipe is set to initial value */ + /* The connection with FIFO should be cut before setting the pipe */ + if (RZA_IO_RegRead_16(&USB201.CFIFOSEL, + USB_CFIFOSEL_CURPIPE_SHIFT, + USB_CFIFOSEL_CURPIPE) == pipe) + { + usb1_host_change_fifo_port(USB_HOST_PIPE0, USB_HOST_CUSE, USB_HOST_NO, USB_HOST_BITMBW_16); + } + + if (RZA_IO_RegRead_16(&USB201.D0FIFOSEL, + USB_DnFIFOSEL_CURPIPE_SHIFT, + USB_DnFIFOSEL_CURPIPE) == pipe) + { + usb1_host_change_fifo_port(USB_HOST_PIPE0, USB_HOST_D0USE, USB_HOST_NO, USB_HOST_BITMBW_16); + } + + if (RZA_IO_RegRead_16(&USB201.D1FIFOSEL, + USB_DnFIFOSEL_CURPIPE_SHIFT, + USB_DnFIFOSEL_CURPIPE) == pipe) + { + usb1_host_change_fifo_port(USB_HOST_PIPE0, USB_HOST_D1USE, USB_HOST_NO, USB_HOST_BITMBW_16); + } + + /* Interrupt of pipe set is disabled */ + usb1_host_disable_brdy_int(pipe); + usb1_host_disable_nrdy_int(pipe); + usb1_host_disable_bemp_int(pipe); + + /* Pipe to set is set to NAK */ + usb1_host_set_pid_nak(pipe); + + /* Pipe is set */ + USB201.PIPESEL = pipe; + + USB201.PIPECFG = tbl->pipe_cfg; + USB201.PIPEBUF = tbl->pipe_buf; + USB201.PIPEMAXP = tbl->pipe_max_pktsize; + USB201.PIPEPERI = tbl->pipe_cycle; + + g_usb1_host_pipecfg[pipe] = tbl->pipe_cfg; + g_usb1_host_pipebuf[pipe] = tbl->pipe_buf; + g_usb1_host_pipemaxp[pipe] = tbl->pipe_max_pktsize; + g_usb1_host_pipeperi[pipe] = tbl->pipe_cycle; + + /* Sequence bit clear */ + usb1_host_set_sqclr(pipe); + + usb1_host_aclrm(pipe); + usb1_host_set_csclr(pipe); + + /* Pipe window selection is set to unused */ + USB201.PIPESEL = USB_HOST_PIPE0; + +} + +#if(1) /* ohci_wrapp */ +#else +/******************************************************************************* +* Function Name: usb1_api_host_data_count +* Description : Get g_usb0_host_data_count[pipe] +* Arguments : uint16_t pipe ; Pipe Number +* : uint32_t *data_count ; return g_usb0_data_count[pipe] +* Return Value : DEVDRV_SUCCESS ; success +* : DEVDRV_ERROR ; error +*******************************************************************************/ +int32_t usb1_api_host_data_count (uint16_t pipe, uint32_t * data_count) +{ + if (pipe > USB_HOST_MAX_PIPE_NO) + { + return DEVDRV_ERROR; + } + + *data_count = g_usb1_host_PipeDataSize[pipe]; + + return DEVDRV_SUCCESS; +} +#endif + +/* End of File */