Jerry Bradshaw / Mbed OS HSP_RPC_GUI_3_0_1

Firmware enhancements for HSP_RPC_GUI 3.0.1

Dependencies:   USBDevice

Fork of HSP_RPC_GUI by Maxim Integrated

This command can be used to import the project to your local environment

Quote:

mbed import http://mbed.org/users/jbradshaw/code/HSP_RPC_GUI_3_0_1/

This command can be used to compile the code and produce the HSP_RPC_GUI_3_0_1.bin

Quote:

mbed compile -t GCC_ARM -m MAX32620HSP

This link may be used to install the mbed command-line-interface (cli) if needed

Quote:

https://github.com/ARMmbed/mbed-cli

HSP/Devices/MAX30101/MAX30101_RPC.cpp@3:8e9b9f5818aa, 2017-04-25 (annotated)

Committer:
jbradshaw
Date:
Tue Apr 25 10:47:10 2017 -0500
Revision:
3:8e9b9f5818aa
Parent:
1:9490836294ea 
Removed Bulk Erasing, instead a small number of bytes are sampled from each and every page to determine if sector is "dirty", if so sector is erased

Prevents device from sleeping when the firmware detects a series of binary flash page RPC transfers, this increases flash page transfers by %450

  when 200mS elapse with the last flash page transfer, normal sleep behaviour is resumed

Who changed what in which revision?

UserRevisionLine numberNew contents of line
jbradshaw 0:e4a10ed6eb92 1 /*******************************************************************************
jbradshaw 0:e4a10ed6eb92 2 * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
jbradshaw 0:e4a10ed6eb92 3 *
jbradshaw 0:e4a10ed6eb92 4 * Permission is hereby granted, free of charge, to any person obtaining a
jbradshaw 0:e4a10ed6eb92 5 * copy of this software and associated documentation files (the "Software"),
jbradshaw 0:e4a10ed6eb92 6 * to deal in the Software without restriction, including without limitation
jbradshaw 0:e4a10ed6eb92 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
jbradshaw 0:e4a10ed6eb92 8 * and/or sell copies of the Software, and to permit persons to whom the
jbradshaw 0:e4a10ed6eb92 9 * Software is furnished to do so, subject to the following conditions:
jbradshaw 0:e4a10ed6eb92 10 *
jbradshaw 0:e4a10ed6eb92 11 * The above copyright notice and this permission notice shall be included
jbradshaw 0:e4a10ed6eb92 12 * in all copies or substantial portions of the Software.
jbradshaw 0:e4a10ed6eb92 13 *
jbradshaw 0:e4a10ed6eb92 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
jbradshaw 0:e4a10ed6eb92 15 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
jbradshaw 0:e4a10ed6eb92 16 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
jbradshaw 0:e4a10ed6eb92 17 * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
jbradshaw 0:e4a10ed6eb92 18 * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
jbradshaw 0:e4a10ed6eb92 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
jbradshaw 0:e4a10ed6eb92 20 * OTHER DEALINGS IN THE SOFTWARE.
jbradshaw 0:e4a10ed6eb92 21 *
jbradshaw 0:e4a10ed6eb92 22 * Except as contained in this notice, the name of Maxim Integrated
jbradshaw 0:e4a10ed6eb92 23 * Products, Inc. shall not be used except as stated in the Maxim Integrated
jbradshaw 0:e4a10ed6eb92 24 * Products, Inc. Branding Policy.
jbradshaw 0:e4a10ed6eb92 25 *
jbradshaw 0:e4a10ed6eb92 26 * The mere transfer of this software does not imply any licenses
jbradshaw 0:e4a10ed6eb92 27 * of trade secrets, proprietary technology, copyrights, patents,
jbradshaw 0:e4a10ed6eb92 28 * trademarks, maskwork rights, or any other form of intellectual
jbradshaw 0:e4a10ed6eb92 29 * property whatsoever. Maxim Integrated Products, Inc. retains all
jbradshaw 0:e4a10ed6eb92 30 * ownership rights.
jbradshaw 0:e4a10ed6eb92 31 *******************************************************************************
jbradshaw 0:e4a10ed6eb92 32 */
jbradshaw 0:e4a10ed6eb92 33 #include "MAX30101_RPC.h"
jbradshaw 0:e4a10ed6eb92 34 #include "StringHelper.h"
jbradshaw 0:e4a10ed6eb92 35 #include "MAX30101.h"
jbradshaw 0:e4a10ed6eb92 36 #include "Streaming.h"
jbradshaw 0:e4a10ed6eb92 37 #include "RpcFifo.h"
jbradshaw 0:e4a10ed6eb92 38 #include "RpcServer.h"
jbradshaw 0:e4a10ed6eb92 39 #include "StringInOut.h"
jbradshaw 0:e4a10ed6eb92 40 #include "MAX30101_helper.h"
jbradshaw 0:e4a10ed6eb92 41 #include "LIS2DH.h"
jbradshaw 0:e4a10ed6eb92 42 #include "Peripherals.h"
jbradshaw 0:e4a10ed6eb92 43 #include "DataLoggingService.h"
jbradshaw 0:e4a10ed6eb92 44
jbradshaw 0:e4a10ed6eb92 45 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 46 int MAX30101_WriteReg(char argStrs[32][32], char replyStrs[32][32]) {
jbradshaw 0:e4a10ed6eb92 47 uint8_t args[2];
jbradshaw 0:e4a10ed6eb92 48 uint8_t reply[1];
jbradshaw 0:e4a10ed6eb92 49 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 50 reply[0] = 0x80;
jbradshaw 0:e4a10ed6eb92 51 FormatReply(reply, sizeof(reply), replyStrs);
jbradshaw 0:e4a10ed6eb92 52 return 0;
jbradshaw 0:e4a10ed6eb92 53 }
jbradshaw 0:e4a10ed6eb92 54
jbradshaw 0:e4a10ed6eb92 55 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 56 int MAX30101_ReadReg(char argStrs[32][32], char replyStrs[32][32]) {
jbradshaw 0:e4a10ed6eb92 57 uint8_t args[1];
jbradshaw 0:e4a10ed6eb92 58 uint8_t reply[1];
jbradshaw 1:9490836294ea 59 char value = 0;
jbradshaw 0:e4a10ed6eb92 60 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 61 reply[0] = (uint8_t)value;
jbradshaw 0:e4a10ed6eb92 62 FormatReply(reply, sizeof(reply), replyStrs);
jbradshaw 0:e4a10ed6eb92 63 return 0;
jbradshaw 0:e4a10ed6eb92 64 }
jbradshaw 0:e4a10ed6eb92 65
jbradshaw 0:e4a10ed6eb92 66 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 67 int MAX30101_COMMinit(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 68 {
jbradshaw 0:e4a10ed6eb92 69 uint8_t args[4];
jbradshaw 1:9490836294ea 70 uint8_t return_value = 0;
jbradshaw 0:e4a10ed6eb92 71 ProcessArgs(argStrs,args,sizeof(args));
jbradshaw 0:e4a10ed6eb92 72
jbradshaw 0:e4a10ed6eb92 73 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 74 return return_value;
jbradshaw 0:e4a10ed6eb92 75 }
jbradshaw 0:e4a10ed6eb92 76
jbradshaw 0:e4a10ed6eb92 77 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 78 int MAX30101_SpO2mode_stop(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 79 {
jbradshaw 0:e4a10ed6eb92 80 uint8_t args[4];
jbradshaw 1:9490836294ea 81 uint8_t return_value = 0;
jbradshaw 0:e4a10ed6eb92 82 ProcessArgs(argStrs,args,sizeof(args));
jbradshaw 0:e4a10ed6eb92 83
jbradshaw 0:e4a10ed6eb92 84 Peripherals::max30101()->SpO2mode_stop();
jbradshaw 0:e4a10ed6eb92 85
jbradshaw 0:e4a10ed6eb92 86 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 87 return return_value;
jbradshaw 0:e4a10ed6eb92 88 }
jbradshaw 0:e4a10ed6eb92 89
jbradshaw 0:e4a10ed6eb92 90 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 91 int MAX30101_HRmode_stop(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 92 {
jbradshaw 0:e4a10ed6eb92 93 uint8_t args[4];
jbradshaw 0:e4a10ed6eb92 94 ProcessArgs(argStrs,args,sizeof(args));
jbradshaw 0:e4a10ed6eb92 95
jbradshaw 0:e4a10ed6eb92 96 Peripherals::max30101()->HRmode_stop();
jbradshaw 0:e4a10ed6eb92 97
jbradshaw 0:e4a10ed6eb92 98 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 99 return 0;
jbradshaw 0:e4a10ed6eb92 100 }
jbradshaw 0:e4a10ed6eb92 101
jbradshaw 0:e4a10ed6eb92 102 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 103 int MAX30101_Multimode_stop(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 104 {
jbradshaw 0:e4a10ed6eb92 105 uint8_t args[4];
jbradshaw 0:e4a10ed6eb92 106 ProcessArgs(argStrs,args,sizeof(args));
jbradshaw 0:e4a10ed6eb92 107
jbradshaw 0:e4a10ed6eb92 108 Peripherals::max30101()->Multimode_stop();
jbradshaw 0:e4a10ed6eb92 109
jbradshaw 0:e4a10ed6eb92 110 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 111 return 0;
jbradshaw 0:e4a10ed6eb92 112 }
jbradshaw 0:e4a10ed6eb92 113
jbradshaw 0:e4a10ed6eb92 114 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 115 void ClearInOutFifos() {
jbradshaw 1:9490836294ea 116 fifo_clear(GetStreamOutFifo()); ///< clear stream out fifo
jbradshaw 1:9490836294ea 117 fifo_clear(GetUSBIncomingFifo()); ///< clear USB serial incoming fifo
jbradshaw 0:e4a10ed6eb92 118 }
jbradshaw 0:e4a10ed6eb92 119
jbradshaw 0:e4a10ed6eb92 120 int highDataRate = 0;
jbradshaw 0:e4a10ed6eb92 121 #define MAX30101_200HZ 2
jbradshaw 0:e4a10ed6eb92 122 #define MAX30101_400HZ 3
jbradshaw 0:e4a10ed6eb92 123
jbradshaw 0:e4a10ed6eb92 124 /**
jbradshaw 0:e4a10ed6eb92 125 * Adjust the threshold of the Accel based on the data rate
jbradshaw 0:e4a10ed6eb92 126 * @lis2dhDataRate Data rate of the accel to determine what would be a good threshold value
jbradshaw 0:e4a10ed6eb92 127 */
jbradshaw 0:e4a10ed6eb92 128 static int adjustAccelThreshold(int lis2dhDataRate) {
jbradshaw 0:e4a10ed6eb92 129 int lis2dhFifoThreshold;
jbradshaw 0:e4a10ed6eb92 130 lis2dhFifoThreshold = 31;
jbradshaw 0:e4a10ed6eb92 131 if (lis2dhDataRate <= LIS2DH_DATARATE_50HZ) lis2dhFifoThreshold = 4;
jbradshaw 0:e4a10ed6eb92 132 if (lis2dhDataRate == LIS2DH_DATARATE_100HZ) lis2dhFifoThreshold = 8;
jbradshaw 0:e4a10ed6eb92 133 return lis2dhFifoThreshold;
jbradshaw 0:e4a10ed6eb92 134 }
jbradshaw 0:e4a10ed6eb92 135
jbradshaw 0:e4a10ed6eb92 136 /**
jbradshaw 0:e4a10ed6eb92 137 * Evaluate the data rate of the Accel to see if we should stream using a high data rate mode
jbradshaw 0:e4a10ed6eb92 138 * @lis2dhDataRate Data rate of the accel to determine if this is a high data rate
jbradshaw 0:e4a10ed6eb92 139 */
jbradshaw 0:e4a10ed6eb92 140 static void adjustHighDataRate(int lis2dhDataRate) {
jbradshaw 0:e4a10ed6eb92 141 highDataRate = 0;
jbradshaw 0:e4a10ed6eb92 142 if (lis2dhDataRate >= LIS2DH_DATARATE_200HZ) highDataRate = 1;
jbradshaw 0:e4a10ed6eb92 143 }
jbradshaw 0:e4a10ed6eb92 144
jbradshaw 0:e4a10ed6eb92 145 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 146 int MAX30101_SpO2mode_init(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 147 {
jbradshaw 0:e4a10ed6eb92 148 uint8_t args[7];
jbradshaw 0:e4a10ed6eb92 149 uint8_t lis2dhDataRate;
jbradshaw 0:e4a10ed6eb92 150 uint8_t lis2dhFifoThreshold;
jbradshaw 0:e4a10ed6eb92 151 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 152
jbradshaw 0:e4a10ed6eb92 153 ClearInOutFifos();
jbradshaw 0:e4a10ed6eb92 154 MAX30101_Helper_SetStreamingFlag(eStreaming_SPO2,1);
jbradshaw 0:e4a10ed6eb92 155 Peripherals::max30101()->SpO2mode_init(args[0], args[1], args[2], args[3], args[4], args[5]);
jbradshaw 0:e4a10ed6eb92 156
jbradshaw 0:e4a10ed6eb92 157 lis2dhDataRate = args[6];
jbradshaw 0:e4a10ed6eb92 158 lis2dhFifoThreshold = adjustAccelThreshold(lis2dhDataRate);
jbradshaw 0:e4a10ed6eb92 159 adjustHighDataRate(lis2dhDataRate);
jbradshaw 0:e4a10ed6eb92 160
jbradshaw 0:e4a10ed6eb92 161 Peripherals::lis2dh()->initStart(lis2dhDataRate,lis2dhFifoThreshold);
jbradshaw 0:e4a10ed6eb92 162 LoggingService_StartLoggingUsb();
jbradshaw 0:e4a10ed6eb92 163
jbradshaw 0:e4a10ed6eb92 164 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 165 return 0;
jbradshaw 0:e4a10ed6eb92 166 }
jbradshaw 0:e4a10ed6eb92 167
jbradshaw 0:e4a10ed6eb92 168 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 169 int MAX30101_SpO2mode_InitStart(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 170 {
jbradshaw 0:e4a10ed6eb92 171 uint8_t args[6]; // Size
jbradshaw 0:e4a10ed6eb92 172 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 173
jbradshaw 0:e4a10ed6eb92 174 ClearInOutFifos();
jbradshaw 0:e4a10ed6eb92 175 MAX30101_Helper_SetStreamingFlag(eStreaming_SPO2,1);
jbradshaw 1:9490836294ea 176 if (args[2] >= MAX30101_200HZ) {
jbradshaw 1:9490836294ea 177 highDataRate = 1;
jbradshaw 1:9490836294ea 178 }
jbradshaw 0:e4a10ed6eb92 179 Peripherals::max30101()->SpO2mode_init(args[0], args[1], args[2], args[3], args[4], args[5]);
jbradshaw 0:e4a10ed6eb92 180
jbradshaw 0:e4a10ed6eb92 181 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 182 return 0;
jbradshaw 0:e4a10ed6eb92 183 }
jbradshaw 0:e4a10ed6eb92 184
jbradshaw 0:e4a10ed6eb92 185 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 186 int MAX30101_HRmode_init(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 187 {
jbradshaw 0:e4a10ed6eb92 188 uint8_t args[6];
jbradshaw 0:e4a10ed6eb92 189 uint8_t lis2dhDataRate;
jbradshaw 0:e4a10ed6eb92 190 uint8_t lis2dhFifoThreshold;
jbradshaw 0:e4a10ed6eb92 191 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 192
jbradshaw 0:e4a10ed6eb92 193 ClearInOutFifos();
jbradshaw 0:e4a10ed6eb92 194 MAX30101_Helper_SetStreamingFlag(eStreaming_HR,1);
jbradshaw 0:e4a10ed6eb92 195 Peripherals::max30101()->HRmode_init(args[0], args[1], args[2], args[3], args[4]);
jbradshaw 0:e4a10ed6eb92 196
jbradshaw 0:e4a10ed6eb92 197 lis2dhDataRate = args[5];
jbradshaw 0:e4a10ed6eb92 198 lis2dhFifoThreshold = adjustAccelThreshold(lis2dhDataRate);
jbradshaw 0:e4a10ed6eb92 199 adjustHighDataRate(lis2dhDataRate);
jbradshaw 0:e4a10ed6eb92 200
jbradshaw 0:e4a10ed6eb92 201 Peripherals::lis2dh()->initStart(lis2dhDataRate,lis2dhFifoThreshold);
jbradshaw 0:e4a10ed6eb92 202 LoggingService_StartLoggingUsb();
jbradshaw 0:e4a10ed6eb92 203 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 204 return 0;
jbradshaw 0:e4a10ed6eb92 205 }
jbradshaw 0:e4a10ed6eb92 206
jbradshaw 0:e4a10ed6eb92 207 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 208 int MAX30101_HRmode_InitStart(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 209 {
jbradshaw 0:e4a10ed6eb92 210 uint8_t args[5];
jbradshaw 0:e4a10ed6eb92 211 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 212
jbradshaw 0:e4a10ed6eb92 213 ClearInOutFifos();
jbradshaw 0:e4a10ed6eb92 214 MAX30101_Helper_SetStreamingFlag(eStreaming_HR,1);
jbradshaw 1:9490836294ea 215 if (args[2] >= MAX30101_200HZ) {
jbradshaw 1:9490836294ea 216 highDataRate = 1;
jbradshaw 1:9490836294ea 217 }
jbradshaw 0:e4a10ed6eb92 218 Peripherals::max30101()->HRmode_init(args[0], args[1], args[2], args[3], args[4]);
jbradshaw 0:e4a10ed6eb92 219 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 220 return 0;
jbradshaw 0:e4a10ed6eb92 221 }
jbradshaw 0:e4a10ed6eb92 222
jbradshaw 0:e4a10ed6eb92 223 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 224 int MAX30101_Multimode_init(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 225 {
jbradshaw 0:e4a10ed6eb92 226 uint8_t args[12];
jbradshaw 0:e4a10ed6eb92 227 uint8_t lis2dhDataRate;
jbradshaw 0:e4a10ed6eb92 228 uint8_t lis2dhFifoThreshold;
jbradshaw 0:e4a10ed6eb92 229 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 230
jbradshaw 0:e4a10ed6eb92 231 ClearInOutFifos();
jbradshaw 0:e4a10ed6eb92 232
jbradshaw 0:e4a10ed6eb92 233 lis2dhDataRate = args[11];
jbradshaw 0:e4a10ed6eb92 234 lis2dhFifoThreshold = adjustAccelThreshold(lis2dhDataRate);
jbradshaw 0:e4a10ed6eb92 235 adjustHighDataRate(lis2dhDataRate);
jbradshaw 0:e4a10ed6eb92 236
jbradshaw 0:e4a10ed6eb92 237 Peripherals::lis2dh()->initStart(lis2dhDataRate,lis2dhFifoThreshold);
jbradshaw 0:e4a10ed6eb92 238
jbradshaw 0:e4a10ed6eb92 239 wait(0.1f);
jbradshaw 0:e4a10ed6eb92 240 MAX30101_Helper_SetStreamingFlag(eStreaming_MULTI, 1);
jbradshaw 0:e4a10ed6eb92 241 Peripherals::max30101()->Multimode_init(args[0], args[1], args[2],
jbradshaw 0:e4a10ed6eb92 242 args[3], args[4], args[5], args[6],
jbradshaw 0:e4a10ed6eb92 243 args[7], args[8], args[9], args[10]);
jbradshaw 0:e4a10ed6eb92 244 LoggingService_StartLoggingUsb();
jbradshaw 0:e4a10ed6eb92 245
jbradshaw 0:e4a10ed6eb92 246 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 247 return 0;
jbradshaw 0:e4a10ed6eb92 248 }
jbradshaw 0:e4a10ed6eb92 249
jbradshaw 0:e4a10ed6eb92 250 //******************************************************************************
jbradshaw 0:e4a10ed6eb92 251 int MAX30101_Multimode_InitStart(char argStrs[32][32], char replyStrs[32][32])
jbradshaw 0:e4a10ed6eb92 252 {
jbradshaw 0:e4a10ed6eb92 253 uint8_t args[11];
jbradshaw 0:e4a10ed6eb92 254 ProcessArgs(argStrs, args, sizeof(args));
jbradshaw 0:e4a10ed6eb92 255
jbradshaw 0:e4a10ed6eb92 256 ClearInOutFifos();
jbradshaw 0:e4a10ed6eb92 257 MAX30101_Helper_SetStreamingFlag(eStreaming_MULTI, 1);
jbradshaw 1:9490836294ea 258 if (args[2] >= MAX30101_200HZ) {
jbradshaw 1:9490836294ea 259 highDataRate = 1;
jbradshaw 1:9490836294ea 260 }
jbradshaw 0:e4a10ed6eb92 261 Peripherals::max30101()->Multimode_init(args[0], args[1], args[2],
jbradshaw 0:e4a10ed6eb92 262 args[3], args[4], args[5], args[6],
jbradshaw 0:e4a10ed6eb92 263 args[7], args[8], args[9], args[10]);
jbradshaw 0:e4a10ed6eb92 264
jbradshaw 0:e4a10ed6eb92 265 strcpy(replyStrs[0],"80");
jbradshaw 0:e4a10ed6eb92 266 return 0;
jbradshaw 0:e4a10ed6eb92 267 }
jbradshaw 0:e4a10ed6eb92 268
jbradshaw 0:e4a10ed6eb92 269
jbradshaw 0:e4a10ed6eb92 270