tarou yamada / nucleo_rotary_encoder

Dependents:   serial_connected_mcu_nucleo rotary_encoder_mbed serial_connected_mcu_nucleo omuni_speed_pid ... more

Fork of rotary_encoder by tarou yamada

このライブラリは以下のプログラムに基いています https://developer.mbed.org/users/gregeric/code/Nucleo_Hello_Encoder/

rotary_encoder_base/rotary_encoder_base.cpp

Committer:
inst
Date:
2016-05-21
Revision:
7:3b51e2c660b6
Parent:
4:d07f58c46a79
Child:
9:d1e6284a13ab

File content as of revision 7:3b51e2c660b6:

#include "rotary_encoder_base.hpp"
#include "rotary_encoder.hpp"
#include "mbed.h"

rotary_encoder_base::rotary_encoder_base(TIM_TypeDef* timer_type,
                                        uint32_t encoder_mode,
                                        size_t resolution) : rotary_encoder(resolution) {
    timer_handler_.Instance              = timer_type;
    timer_handler_.Init.Period           = max_counts_;
    timer_handler_.Init.CounterMode      = TIM_COUNTERMODE_UP;
    timer_handler_.Init.Prescaler        = 0;
    timer_handler_.Init.ClockDivision    = TIM_CLOCKDIVISION_DIV1;
    
    TIM_Encoder_InitTypeDef encoder;
    encoder.EncoderMode = encoder_mode;
    
    encoder.IC1Filter       = 0x0F;
    encoder.IC1Polarity     = TIM_INPUTCHANNELPOLARITY_RISING;
    encoder.IC1Prescaler    = TIM_ICPSC_DIV4;
    encoder.IC1Selection    = TIM_ICSELECTION_DIRECTTI;

    encoder.IC2Filter       = 0x0F;
    encoder.IC2Polarity     = TIM_INPUTCHANNELPOLARITY_FALLING;
    encoder.IC2Prescaler    = TIM_ICPSC_DIV4;
    encoder.IC2Selection    = TIM_ICSELECTION_DIRECTTI;
    
    if (HAL_TIM_Encoder_Init(&timer_handler_, &encoder) != HAL_OK) {
        error("couldn't init encoder\n");
    }
}

rotary_encoder_base::~rotary_encoder_base() {}

int32_t rotary_encoder_base::get_counts() const {
    int32_t counts = timer_handler_.Instance->CNT;
    
    if (counts > (max_counts_ >> 1)) {
        return counts - max_counts_;
    }
    return  counts;
}

void rotary_encoder_base::reset() {
    timer_handler_.Instance->CNT = 0;
}

void rotary_encoder_base::start() {
    if(HAL_TIM_Encoder_Start(&timer_handler_, TIM_CHANNEL_1) != HAL_OK) {
        error("couldn't start encoder\r\n");
    }
}

void rotary_encoder_base::stop() {
    if(HAL_TIM_Encoder_Stop(&timer_handler_, TIM_CHANNEL_1) != HAL_OK) {
        error("couldn't start encoder\r\n");
    }
}