iforce2d Chris
Displays distance to start location on OLED screen.
Diff: u8g_dev_ssd1327_96x96_gr.c
- Revision:
- 0:972874f31c98
diff -r 000000000000 -r 972874f31c98 u8g_dev_ssd1327_96x96_gr.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/u8g_dev_ssd1327_96x96_gr.c Wed Mar 07 12:49:14 2018 +0000
@@ -0,0 +1,300 @@
+/*
+
+ u8g_dev_ssd1327_96x96_gr.c
+
+ 2-Bit (graylevel) Driver for SSD1327 Controller (OLED Display)
+ Tested with Seedstudio 96x96 Oled (LY120)
+ http://www.seeedstudio.com/wiki/index.php?title=Twig_-_OLED_96x96
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2012, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ SSD130x Monochrom OLED Controller
+ SSD131x Character OLED Controller
+ SSD132x Graylevel OLED Controller
+ SSD1331 Color OLED Controller
+
+*/
+
+#include "u8g.h"
+
+#define WIDTH 96
+#define HEIGHT 96
+#define XOFFSET 8
+
+/*
+ http://www.seeedstudio.com/wiki/index.php?title=Twig_-_OLED_96x96
+*/
+static const uint8_t u8g_dev_ssd1327_2bit_96x96_init_seq[] PROGMEM = {
+ U8G_ESC_DLY(10), /* delay 10 ms */
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
+ U8G_ESC_CS(1), /* enable chip */
+ 0x0fd, 0x012, /* unlock display, usually not required because the display is unlocked after reset */
+ 0x0ae, /* display off, sleep mode */
+ 0x0a8, 0x05f, /* multiplex ratio: 0x05f * 1/64 duty */
+ 0x0a1, 0x000, /* display start line */
+ 0x0a2, 0x060, /* display offset, shift mapping ram counter */
+ //0x0a2, 0x04c, /* NHD: display offset, shift mapping ram counter */
+ 0x0a0, 0x046, /* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
+ //0x0a0, 0x056, /* NHD: remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
+ 0x0ab, 0x001, /* Enable internal VDD regulator (RESET) */
+ 0x081, 0x053, /* contrast, brightness, 0..128, Newhaven: 0x040, LY120 0x053, 0x070 seems also ok */
+ 0x0b1, 0x051, /* phase length */
+ 0x0b3, 0x001, /* set display clock divide ratio/oscillator frequency */
+ 0x0b9, /* use linear lookup table */
+#if 0
+ 0x0b8, /* set gray scale table */
+ //0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
+ 0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x077, 0x077, // 4L mode uses 0, 2, 4, 7
+#endif
+ 0x0bc, 0x008, /* pre-charge voltage level */
+ 0x0be, 0x007, /* VCOMH voltage */
+ 0x0b6, 0x001, /* second precharge */
+ 0x0d5, 0x062, /* enable second precharge, internal vsl (bit0 = 0) */
+
+#if 0
+ // the following commands are not used by the SeeedGrayOLED sequence */
+ 0x0ad, 0x002, /* master configuration: disable embedded DC-DC, enable internal VCOMH */
+ 0x086, /* full current range (0x084, 0x085, 0x086) */
+ 0x0b2, 0x051, /* frame frequency (row period) */
+ 0x0b4, 0x002, /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+ 0x0b0, 0x028, /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+ 0x0bf, 0x002|0x00d, /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
+#endif
+
+ 0x0a5, /* all pixel on */
+ //0x02e, /* no scroll (according to SeeedGrayOLED sequence) */
+ 0x0af, /* display on */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a4, /* normal display mode */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a5, /* all pixel on */
+ 0x0af, /* display on */
+ U8G_ESC_DLY(100), /* delay 100 ms */
+ 0x0a4, /* normal display mode */
+
+ 0x015, /* column address... */
+ 0x008, /* start at column 8, special for the LY120 ??? */
+ 0x037, /* end at column 55, note: there are two pixel in one column */
+
+ 0x075, /* row address... */
+ 0x008,
+ 0x05f,
+
+ U8G_ESC_ADR(1), /* data mode */
+ 0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+ 0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+ 0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+ 0x000f, 0x000f, 0x0000, 0x0000, 0x000f,0x000f,0x0000,0x0000,
+
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_END /* end of sequence */
+};
+
+static const uint8_t u8g_dev_ssd1327_2bit_96x96_prepare_page_seq[] PROGMEM = {
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_CS(1), /* enable chip */
+ 0x015, /* column address... */
+ XOFFSET, /* start at column 8, special for the LY120 ??? */
+ 0x037, /* end at column 55, note: there are two pixel in one column */
+ 0x075, /* row address... */
+ U8G_ESC_END /* end of sequence */
+};
+
+
+static void u8g_dev_ssd1327_2bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev)
+{
+ uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_prepare_page_seq);
+
+ page <<= 2;
+ u8g_WriteByte(u8g, dev, page); /* start at the selected page */
+ page += 3;
+ u8g_WriteByte(u8g, dev, page); /* end within the selected page */
+
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+}
+
+static void u8g_dev_ssd1327_2bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+ uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
+
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_prepare_page_seq);
+
+ page <<= 1;
+ page += is_odd;
+
+ page <<= 2;
+ u8g_WriteByte(u8g, dev, page); /* start at the selected page */
+ page += 3;
+ u8g_WriteByte(u8g, dev, page); /* end within the selected page */
+
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+}
+
+/* assumes row autoincrement and activated nibble remap */
+static void u8g_dev_ssd1327_2bit_write_4_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
+{
+ uint8_t d, tmp, cnt;
+ static uint8_t buf[4];
+ buf[0] = 0;
+ buf[1] = 0;
+ buf[2] = 0;
+ buf[3] = 0;
+ cnt = 0;
+ do
+ {
+ if ( left == 0 && right == 0 )
+ break;
+ d = left;
+ d &= 3;
+ d <<= 4;
+ tmp = right;
+ tmp &= 3;
+ d |= tmp;
+ d <<= 2;
+ buf[cnt] = d;
+ left >>= 2;
+ right >>= 2;
+ cnt++;
+ }while ( cnt < 4 );
+ u8g_WriteSequence(u8g, dev, 4, buf);
+}
+
+static void u8g_dev_ssd1327_2bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev)
+{
+ uint8_t cnt, left, right;
+ uint8_t *ptr;
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ cnt = pb->width;
+ cnt >>= 1;
+ ptr = pb->buf;
+ do
+ {
+ left = *ptr++;
+ right = *ptr++;
+ u8g_dev_ssd1327_2bit_write_4_pixel(u8g, dev, left, right);
+ cnt--;
+ } while( cnt > 0 );
+}
+
+static void u8g_dev_ssd1327_2bit_2x_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
+{
+ uint8_t cnt, left, right;
+ uint8_t *ptr;
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ ptr = pb->buf;
+ cnt = pb->width;
+ if ( is_odd )
+ ptr += cnt;
+ cnt >>= 1;
+ do
+ {
+ left = *ptr++;
+ right = *ptr++;
+ u8g_dev_ssd1327_2bit_write_4_pixel(u8g, dev, left, right);
+ cnt--;
+ } while( cnt > 0 );
+}
+
+uint8_t u8g_dev_ssd1327_96x96_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_dev_ssd1327_2bit_prepare_page(u8g, dev);
+ u8g_dev_ssd1327_2bit_write_buffer(u8g, dev);
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_SetAddress(u8g, dev, 0); /* instruction mode */
+ u8g_WriteByte(u8g, dev, 0x081);
+ u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+ u8g_SetChipSelect(u8g, dev, 0);
+ return 1;
+ }
+ return u8g_dev_pb8v2_base_fn(u8g, dev, msg, arg);
+}
+
+uint8_t u8g_dev_ssd1327_96x96_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_dev_ssd1327_2bit_2x_prepare_page(u8g, dev, 0);
+ u8g_dev_ssd1327_2bit_2x_write_buffer(u8g, dev, 0);
+ u8g_dev_ssd1327_2bit_2x_prepare_page(u8g, dev, 1);
+ u8g_dev_ssd1327_2bit_2x_write_buffer(u8g, dev, 1);
+ u8g_SetChipSelect(u8g, dev, 0);
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_SetAddress(u8g, dev, 0); /* instruction mode */
+ u8g_WriteByte(u8g, dev, 0x081);
+ u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
+ u8g_SetChipSelect(u8g, dev, 0);
+ return 1;
+ }
+ return u8g_dev_pb16v2_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_ssd1327_96x96_gr_sw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1327_96x96_gr_fn, U8G_COM_SW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1327_96x96_gr_hw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1327_96x96_gr_fn, U8G_COM_HW_SPI);
+U8G_PB_DEV(u8g_dev_ssd1327_96x96_gr_i2c , WIDTH, HEIGHT, 4, u8g_dev_ssd1327_96x96_gr_fn, U8G_COM_SSD_I2C);
+
+#define DWIDTH (2*WIDTH)
+uint8_t u8g_dev_ssd1327_96x96_2x_buf[DWIDTH] U8G_NOCOMMON ;
+u8g_pb_t u8g_dev_ssd1327_96x96_2x_pb = { {8, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1327_96x96_2x_buf};
+u8g_dev_t u8g_dev_ssd1327_96x96_2x_gr_sw_spi = { u8g_dev_ssd1327_96x96_2x_gr_fn, &u8g_dev_ssd1327_96x96_2x_pb, U8G_COM_SW_SPI };
+u8g_dev_t u8g_dev_ssd1327_96x96_2x_gr_hw_spi = { u8g_dev_ssd1327_96x96_2x_gr_fn, &u8g_dev_ssd1327_96x96_2x_pb, U8G_COM_HW_SPI };
+u8g_dev_t u8g_dev_ssd1327_96x96_2x_gr_i2c = { u8g_dev_ssd1327_96x96_2x_gr_fn, &u8g_dev_ssd1327_96x96_2x_pb, U8G_COM_SSD_I2C };
+
+