![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Bluetooth Connected TOF Sensor
Dependencies: BLE_API X_NUCLEO_6180XA1 X_NUCLEO_IDB0XA1 mbed
Fork of BLE_HeartRate_IDB0XA1 by
bricks/advertise.h
- Committer:
- hux
- Date:
- 2017-02-02
- Revision:
- 30:e324e95c68a9
- Parent:
- 28:def5e0f0fb06
File content as of revision 30:e324e95c68a9:
// advertise.h - begin peripheral role and start advertising // // Synopsis: // // advertise(O&o); // advertise(O&o, const char *mode, int ms = 100); // // payload(O&o,const char *mode) // set advertising payload // // Arguments: // // o: Blob object (to avoid name clashes) // mode: String containing a sequence of mode characters defining both // advertising type (upper case characters) and advertising flags // (lower case characters), some of which have meaning, all others // are ignored and can be used for spacing (e.g. ':', ' ', '-', ...) // ms: Advertising interval in mili seconds (default 100 ms) // // Advertising Type // // C: ADV_CONNECTABLE_UNDIRECTED // D: ADV_CONNECTABLE_DIRECTED // S: ADV_SCANNABLE_UNDIRECTED // N: ADV_NON_CONNECTABLE_UNDIRECTED // // Advertising Flags: // // l: LE Limited Discoverable Mode (value: 0x01) // g: LE General Discoverable Mode (value: 0x02) // n: BR/EDR Not Supported (value: 0x04) // c: Controller: simultaneous LE & BR/EDR (value: 0x08) // h: Host: Simultaneous LE & BR/EDR (value: 0x10) // // Examples 1: Start advertising in peripheral role with type 'connectable, uni- // directed, and flags 'BR/EDR Not Supported', 'LE General Discoverable Mode' // // advertise(o,"C:ng",100); // start advertising @ 100 msec interval // advertise(o,"Cng",100); // same as above // advertise(o,"gCn",100); // same as above // // Examples 2: Start advertising in peripheral role with type 'connectable, // directed, and flags 'LE Limited Discoverable Mode' // // advertise("D:l",100) // Connectable Directed, limited discoverable // // Examples 3: A typical peripheral advertising session starts with setup of // device name, advertising name and advertising data. // // device(o,"Smart Button"); // setup device name // name(o,"Smart Button #1"); // setup advertising name // data(o,"My Home"); // setup advertising data // advertise(o,"C:ng",100); // start advertising @ 100 msec interval // // Example 4: restart advertising based on pre-defined advertising payload // // // See also: SERVICE // #ifndef _ADVERTISE_H_ #define _ADVERTISE_H_ #include "bricks/blob.h" #include "bricks/trace.h" #define _GADAT GapAdvertisingData #define _GAPAR GapAdvertisingParams inline void payload(O&o,const char *p) // Set advertising type and flags { _GAPAR::AdvertisingType_t typ = _GAPAR::ADV_CONNECTABLE_UNDIRECTED; uint8_t mask = 0x00; for (;*p; p++) { switch (*p) { case 'l': mask = mask | _GADAT::LE_LIMITED_DISCOVERABLE; break; case 'g': mask = mask | _GADAT::LE_GENERAL_DISCOVERABLE; break; case 'n': mask = mask | _GADAT::BREDR_NOT_SUPPORTED; break; case 'c': mask = mask | _GADAT::SIMULTANEOUS_LE_BREDR_C; break; case 'h': mask = mask | _GADAT::SIMULTANEOUS_LE_BREDR_H; break; case 'C': typ = _GAPAR::ADV_CONNECTABLE_UNDIRECTED; break; case 'D': typ = _GAPAR::ADV_CONNECTABLE_DIRECTED; break; case 'S': typ = _GAPAR::ADV_SCANNABLE_UNDIRECTED; break; case 'N': typ = _GAPAR::ADV_NON_CONNECTABLE_UNDIRECTED; break; } } o.gap().setAdvertisingType(typ); o.gap().accumulateAdvertisingPayload(mask); } inline void advertise(O&o) // start advertising { o.gap().startAdvertising(); // start advertising trace(o,2,"<advertising>\n"); } inline void advertise(O&o, int ms) // start advertising (msec: periode) { o.gap().setAdvertisingInterval(ms); advertise(o); // start advertising } inline void advertise(Blob &o, const char *mode, int ms = 100) { payload(o,mode); // set advertising payload type & mask advertise(o,ms); // start advertising } inline bool isConnected(O&o) { return o.getGapState().connected; } #endif // _ADVERTISE_H_