Martin Hudik
BLE test
Fork of
X_NUCLEO_IDB0XA1
by 
ST
Diff: source/BlueNRGGap.cpp
- Revision:
- 252:0c2cb16a7166
- Parent:
- 242:058b2e731adc
- Parent:
- 251:86df2c289e7c
- Child:
- 253:9665a6f8bbdb
--- a/source/BlueNRGGap.cpp Tue Jun 21 17:00:00 2016 +0200
+++ b/source/BlueNRGGap.cpp Mon Jun 27 15:51:20 2016 +0200
@@ -108,6 +108,7 @@
PRINTF("advData.getPayloadLen() == 0\n\r");
//return BLE_ERROR_PARAM_OUT_OF_RANGE;
local_name_length = 0;
+ txPowLevSet = 0;
servUuidlength = 0;
AdvLen = 0;
} else {
@@ -181,6 +182,7 @@
{
PRINTF("Advertising type: COMPLETE_LOCAL_NAME\n\r");
loadPtr.getUnitAtIndex(index).printDataAsString();
+ loadPtr.getUnitAtIndex(index).printDataAsHex();
local_name_length = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
// The total length should include the Data Type Value
if(local_name_length>ADV_DATA_MAX_SIZE-1) {
@@ -188,7 +190,7 @@
}
local_name[0] = (uint8_t)(*loadPtr.getUnitAtIndex(index).getAdTypePtr()); //Data Type Value
memcpy(local_name+1, (uint8_t*)loadPtr.getUnitAtIndex(index).getDataPtr(), local_name_length-1);
- PRINTF("Advertising type: COMPLETE_LOCAL_NAME local_name=%s local_name_length=%d\n\r", local_name, local_name_length);
+ PRINTF("Advertising type: COMPLETE_LOCAL_NAME local_name=%s local_name_length=%d\n\r", local_name+1, local_name_length);
break;
}
@@ -197,13 +199,17 @@
PRINTF("Advertising type: TX_POWER_LEVEL\n\r");
int8_t enHighPower = 0;
int8_t paLevel = 0;
-#ifdef DEBUG
+
int8_t dbm = *loadPtr.getUnitAtIndex(index).getDataPtr();
- int8_t dbmActuallySet = getHighPowerAndPALevelValue(dbm, enHighPower, paLevel);
+ tBleStatus ret = getHighPowerAndPALevelValue(dbm, enHighPower, paLevel);
+#ifdef DEBUG
+ PRINTF("dbm=%d, ret=%d\n\r", dbm, ret);
+ PRINTF("enHighPower=%d, paLevel=%d\n\r", enHighPower, paLevel);
#endif
- PRINTF("dbm=%d, dbmActuallySet=%d\n\r", dbm, dbmActuallySet);
- PRINTF("enHighPower=%d, paLevel=%d\n\r", enHighPower, paLevel);
- aci_hal_set_tx_power_level(enHighPower, paLevel);
+ if(ret == BLE_STATUS_SUCCESS) {
+ aci_hal_set_tx_power_level(enHighPower, paLevel);
+ txPowLevSet = 1;
+ }
break;
}
case GapAdvertisingData::DEVICE_ID: /**< Device ID */
@@ -212,6 +218,11 @@
}
case GapAdvertisingData::SLAVE_CONNECTION_INTERVAL_RANGE: /**< Slave :Connection Interval Range */
{
+ PRINTF("Advertising type: SLAVE_CONNECTION_INTERVAL_RANGE\n\r");
+ uint8_t *ptr = loadPtr.getUnitAtIndex(index).getDataPtr();
+ slaveConnIntervMin = ptr[0]|ptr[1]<<8;
+ slaveConnIntervMax = ptr[2]|ptr[3]<<8;
+
break;
}
case GapAdvertisingData::SERVICE_DATA: /**< Service Data */
@@ -229,17 +240,22 @@
i, loadPtr.getUnitAtIndex(index).getDataPtr()[i]);
}
#endif
- AdvLen = buffSize+2; // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Service Data Type Value byte
- AdvData[0] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
- AdvData[1] = AD_TYPE_SERVICE_DATA;
- memcpy(AdvData+2, loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
+ // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Service Data Type Value byte
+ AdvData[AdvLen++] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
+ AdvData[AdvLen++] = AD_TYPE_SERVICE_DATA;
+ memcpy(&AdvData[AdvLen], loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
+ AdvLen += buffSize;
break;
}
case GapAdvertisingData::ADVERTISING_INTERVAL: /**< Advertising Interval */
{
- PRINTF("Advertising type: ADVERTISING_INTERVAL\n\r");
- //uint32_t advInt = (uint32_t)(*loadPtr.getUnitAtIndex(index).getDataPtr());
+ printf("Advertising type: ADVERTISING_INTERVAL\n\r");
+ uint8_t buffSize = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
+ AdvData[AdvLen++] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
+ AdvData[AdvLen++] = AD_TYPE_ADVERTISING_INTERVAL;
+ memcpy(&AdvData[AdvLen], loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
+ AdvLen += buffSize;
break;
}
case GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA: /**< Manufacturer Specific Data */
@@ -259,10 +275,11 @@
i, loadPtr.getUnitAtIndex(index).getDataPtr()[i]);
}
#endif
- AdvLen = buffSize+2; // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Manufacturer Specific Data Type Value byte
- AdvData[0] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
- AdvData[1] = AD_TYPE_MANUFACTURER_SPECIFIC_DATA;
- memcpy(AdvData+2, loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
+ // the total ADV DATA LEN should include two more bytes: the buffer size byte; and the Manufacturer Specific Data Type Value byte
+ AdvData[AdvLen++] = buffSize+1; // the fisrt byte is the data buffer size (type+data)
+ AdvData[AdvLen++] = AD_TYPE_MANUFACTURER_SPECIFIC_DATA;
+ memcpy(&AdvData[AdvLen], loadPtr.getUnitAtIndex(index).getDataPtr(), buffSize);
+ AdvLen += buffSize;
break;
}
} // end switch
@@ -467,8 +484,8 @@
(const char*)local_name, // LocalName
servUuidlength, // ServiceUUIDLen
servUuidData, // ServiceUUIDList
- 0, // SlaveConnIntervMin
- 0); // SlaveConnIntervMax
+ slaveConnIntervMin, // SlaveConnIntervMin
+ slaveConnIntervMax); // SlaveConnIntervMax
PRINTF("!!!setting discoverable (servUuidlength=0x%x)\n\r", servUuidlength);
@@ -476,6 +493,7 @@
PRINTF("error occurred while setting discoverable (ret=0x%x)\n\r", ret);
switch (ret) {
case BLE_STATUS_INVALID_PARAMS:
+ case ERR_INVALID_HCI_CMD_PARAMS:
return BLE_ERROR_INVALID_PARAM;
case ERR_COMMAND_DISALLOWED:
return BLE_ERROR_OPERATION_NOT_PERMITTED;
@@ -488,6 +506,13 @@
}
}
+ // Since AD_TYPE_TX_POWER_LEVEL has not been set by application, we delete it
+ if(!txPowLevSet) {
+ PRINTF("Deleting TX POW LEV\n");
+ aci_gap_delete_ad_type(AD_TYPE_TX_POWER_LEVEL);
+ txPowLevSet = 0;
+ }
+
// Stop Advertising if an error occurs while updating ADV data
rc = updateAdvertisingData();
if(rc != BLE_ERROR_NONE) {
@@ -514,7 +539,7 @@
{
tBleStatus ret;
- // Before updating the ADV data, delete COMPLETE_LOCAL_NAME and TX_POWER_LEVEL fields (if present)
+ // Before updating the ADV data, delete COMPLETE_LOCAL_NAME field
if(AdvLen > 0) {
if(local_name_length > 0) {
ret = aci_gap_delete_ad_type(AD_TYPE_COMPLETE_LOCAL_NAME);
@@ -533,9 +558,8 @@
}
}
- // If ADV Data Type is SERVICE DATA or MANUFACTURER SPECIFIC DATA,
- // we need to delete it to make the needed room in ADV payload
- if(AdvData[1]==AD_TYPE_SERVICE_DATA || AdvData[1]==AD_TYPE_MANUFACTURER_SPECIFIC_DATA) {
+ // ...and TX_POWER_LEVEL field to make the needed room in ADV payload
+ if(txPowLevSet) {
ret = aci_gap_delete_ad_type(AD_TYPE_TX_POWER_LEVEL);
if (BLE_STATUS_SUCCESS!=ret){
PRINTF("aci_gap_delete_ad_type failed return=%d\n", ret);