Martin Hudik / X_NUCLEO_IDB0XA1

BLE test

Fork of X_NUCLEO_IDB0XA1 by ST

source/BlueNRGDevice.cpp@132:51056160fa4a, 2015-10-07 (annotated)

Committer:
Wolfgang Betz
Date:
Wed Oct 07 08:39:04 2015 +0200
Revision:
132:51056160fa4a
Parent:
130:770ce14d3d15
Child:
139:3a75965fd389
Andrea's version as of mail from 10/06/2015 05:56 PM



From: Andrea PALMIERI <andrea.palmieri@st.com>

To: Wolfgang BETZ <wolfgang.betz@st.com>, Rohit Grover <rohit.grover@arm.com>,

	Antonio VILEI <antonio.vilei@st.com>, Mihail Stoyanov

	<Mihail.Stoyanov@arm.com>

CC: Nicola CAPOVILLA <nicola.capovilla@st.com>, Silvio Lucio OLIVA

	<silvio.oliva@st.com>, "jonathan.austin@arm.com" <jonathan.austin@arm.com>

Content-Class: urn:content-classes:message

Date: Tue, 6 Oct 2015 17:56:34 +0200

Subject: RE: Arduino Compatibility of X-NUCLEO-IDB04A1

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Wolfgang Betz 130:770ce14d3d15 1 /* mbed Microcontroller Library
Wolfgang Betz 130:770ce14d3d15 2 * Copyright (c) 2006-2013 ARM Limited
Wolfgang Betz 130:770ce14d3d15 3 *
Wolfgang Betz 130:770ce14d3d15 4 * Licensed under the Apache License, Version 2.0 (the "License");
Wolfgang Betz 130:770ce14d3d15 5 * you may not use this file except in compliance with the License.
Wolfgang Betz 130:770ce14d3d15 6 * You may obtain a copy of the License at
Wolfgang Betz 130:770ce14d3d15 7 *
Wolfgang Betz 130:770ce14d3d15 8 * http://www.apache.org/licenses/LICENSE-2.0
Wolfgang Betz 130:770ce14d3d15 9 *
Wolfgang Betz 130:770ce14d3d15 10 * Unless required by applicable law or agreed to in writing, software
Wolfgang Betz 130:770ce14d3d15 11 * distributed under the License is distributed on an "AS IS" BASIS,
Wolfgang Betz 130:770ce14d3d15 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
Wolfgang Betz 130:770ce14d3d15 13 * See the License for the specific language governing permissions and
Wolfgang Betz 130:770ce14d3d15 14 * limitations under the License.
Wolfgang Betz 130:770ce14d3d15 15 */
Wolfgang Betz 130:770ce14d3d15 16
Wolfgang Betz 130:770ce14d3d15 17 /**
Wolfgang Betz 130:770ce14d3d15 18 ******************************************************************************
Wolfgang Betz 130:770ce14d3d15 19 * @file BlueNRGDevice.cpp
Wolfgang Betz 130:770ce14d3d15 20 * @author STMicroelectronics
Wolfgang Betz 130:770ce14d3d15 21 * @brief Implementation of BLEDeviceInstanceBase
Wolfgang Betz 130:770ce14d3d15 22 ******************************************************************************
Wolfgang Betz 130:770ce14d3d15 23 * @copy
Wolfgang Betz 130:770ce14d3d15 24 *
Wolfgang Betz 130:770ce14d3d15 25 * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
Wolfgang Betz 130:770ce14d3d15 26 * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
Wolfgang Betz 130:770ce14d3d15 27 * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
Wolfgang Betz 130:770ce14d3d15 28 * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
Wolfgang Betz 130:770ce14d3d15 29 * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
Wolfgang Betz 130:770ce14d3d15 30 * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
Wolfgang Betz 130:770ce14d3d15 31 *
Wolfgang Betz 130:770ce14d3d15 32 * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
Wolfgang Betz 130:770ce14d3d15 33 */
Wolfgang Betz 130:770ce14d3d15 34
Wolfgang Betz 130:770ce14d3d15 35 /** @defgroup BlueNRGDevice
Wolfgang Betz 130:770ce14d3d15 36 * @brief BlueNRG BLE_API Device Adaptation
Wolfgang Betz 130:770ce14d3d15 37 * @{
Wolfgang Betz 130:770ce14d3d15 38 */
Wolfgang Betz 130:770ce14d3d15 39
Wolfgang Betz 130:770ce14d3d15 40 #include "mbed.h"
Wolfgang Betz 130:770ce14d3d15 41 #include "BlueNRGDevice.h"
Wolfgang Betz 130:770ce14d3d15 42 #include "BlueNRGGap.h"
Wolfgang Betz 130:770ce14d3d15 43 #include "BlueNRGGattServer.h"
Wolfgang Betz 130:770ce14d3d15 44
Wolfgang Betz 130:770ce14d3d15 45 #include "btle.h"
Wolfgang Betz 130:770ce14d3d15 46 #include "Utils.h"
Wolfgang Betz 130:770ce14d3d15 47 #include "osal.h"
Wolfgang Betz 130:770ce14d3d15 48
Wolfgang Betz 130:770ce14d3d15 49 #include "debug.h"
Wolfgang Betz 130:770ce14d3d15 50 #include "stm32_bluenrg_ble.h"
Wolfgang Betz 130:770ce14d3d15 51
Wolfgang Betz 130:770ce14d3d15 52 extern "C" {
Wolfgang Betz 130:770ce14d3d15 53 #include "hci.h"
Wolfgang Betz 130:770ce14d3d15 54 }
Wolfgang Betz 130:770ce14d3d15 55
Wolfgang Betz 130:770ce14d3d15 56 #define HEADER_SIZE 5
Wolfgang Betz 130:770ce14d3d15 57 #define MAX_BUFFER_SIZE 255
Wolfgang Betz 130:770ce14d3d15 58
Wolfgang Betz 130:770ce14d3d15 59 /**
Wolfgang Betz 130:770ce14d3d15 60 * The singleton which represents the BlueNRG transport for the BLEDevice.
Wolfgang Betz 130:770ce14d3d15 61 *
Wolfgang Betz 130:770ce14d3d15 62 * See file 'x_nucleo_idb0xa1_targets.h' for details regarding the peripheral pins used!
Wolfgang Betz 130:770ce14d3d15 63 */
Wolfgang Betz 130:770ce14d3d15 64 #include "x_nucleo_idb0xa1_targets.h"
Wolfgang Betz 130:770ce14d3d15 65
Wolfgang Betz 130:770ce14d3d15 66 BlueNRGDevice bluenrgDeviceInstance(IDB0XA1_PIN_SPI_MOSI,
Wolfgang Betz 130:770ce14d3d15 67 IDB0XA1_PIN_SPI_MISO,
Wolfgang Betz 130:770ce14d3d15 68 IDB0XA1_PIN_SPI_SCK,
Wolfgang Betz 130:770ce14d3d15 69 IDB0XA1_PIN_SPI_nCS,
Wolfgang Betz 130:770ce14d3d15 70 IDB0XA1_PIN_SPI_RESET,
Wolfgang Betz 130:770ce14d3d15 71 IDB0XA1_PIN_SPI_IRQ);
Wolfgang Betz 130:770ce14d3d15 72
Wolfgang Betz 130:770ce14d3d15 73 /**
Wolfgang Betz 130:770ce14d3d15 74 * BLE-API requires an implementation of the following function in order to
Wolfgang Betz 130:770ce14d3d15 75 * obtain its transport handle.
Wolfgang Betz 130:770ce14d3d15 76 */
Wolfgang Betz 130:770ce14d3d15 77 BLEInstanceBase *
Wolfgang Betz 130:770ce14d3d15 78 createBLEInstance(void)
Wolfgang Betz 130:770ce14d3d15 79 {
Wolfgang Betz 130:770ce14d3d15 80 return (&bluenrgDeviceInstance);
Wolfgang Betz 130:770ce14d3d15 81 }
Wolfgang Betz 130:770ce14d3d15 82
Wolfgang Betz 130:770ce14d3d15 83 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 84 /**
Wolfgang Betz 130:770ce14d3d15 85 @brief Constructor
Wolfgang Betz 130:770ce14d3d15 86 * @param mosi mbed pin to use for MOSI line of SPI interface
Wolfgang Betz 130:770ce14d3d15 87 * @param miso mbed pin to use for MISO line of SPI interface
Wolfgang Betz 130:770ce14d3d15 88 * @param sck mbed pin to use for SCK line of SPI interface
Wolfgang Betz 130:770ce14d3d15 89 * @param cs mbed pin to use for not chip select line of SPI interface
Wolfgang Betz 130:770ce14d3d15 90 * @param rst mbed pin to use for BlueNRG reset
Wolfgang Betz 130:770ce14d3d15 91 * @param irq mbed pin for BlueNRG IRQ
Wolfgang Betz 130:770ce14d3d15 92 */
Wolfgang Betz 130:770ce14d3d15 93 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 94 BlueNRGDevice::BlueNRGDevice(PinName mosi,
Wolfgang Betz 130:770ce14d3d15 95 PinName miso,
Wolfgang Betz 130:770ce14d3d15 96 PinName sck,
Wolfgang Betz 130:770ce14d3d15 97 PinName cs,
Wolfgang Betz 130:770ce14d3d15 98 PinName rst,
Wolfgang Betz 130:770ce14d3d15 99 PinName irq) : spi_(mosi, miso, sck), nCS_(cs), rst_(rst), irq_(irq)
Wolfgang Betz 130:770ce14d3d15 100 {
Wolfgang Betz 130:770ce14d3d15 101 isInitialized = false;
Wolfgang Betz 130:770ce14d3d15 102
Wolfgang Betz 130:770ce14d3d15 103 // Setup the spi for 8 bit data, low clock polarity,
Wolfgang Betz 130:770ce14d3d15 104 // 1-edge phase, with an 8MHz clock rate
Wolfgang Betz 130:770ce14d3d15 105 spi_.format(8, 0);
Wolfgang Betz 130:770ce14d3d15 106 spi_.frequency(8000000);
Wolfgang Betz 130:770ce14d3d15 107
Wolfgang Betz 130:770ce14d3d15 108 // Deselect the BlueNRG chip by keeping its nCS signal high
Wolfgang Betz 130:770ce14d3d15 109 nCS_ = 1;
Wolfgang Betz 130:770ce14d3d15 110
Wolfgang Betz 130:770ce14d3d15 111 wait_us(500);
Wolfgang Betz 130:770ce14d3d15 112 }
Wolfgang Betz 130:770ce14d3d15 113
Wolfgang Betz 130:770ce14d3d15 114 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 115 /**
Wolfgang Betz 130:770ce14d3d15 116 @brief Destructor
Wolfgang Betz 130:770ce14d3d15 117 */
Wolfgang Betz 130:770ce14d3d15 118 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 119 BlueNRGDevice::~BlueNRGDevice(void)
Wolfgang Betz 130:770ce14d3d15 120 {
Wolfgang Betz 130:770ce14d3d15 121 }
Wolfgang Betz 130:770ce14d3d15 122
Wolfgang Betz 130:770ce14d3d15 123
Wolfgang Betz 130:770ce14d3d15 124 /**
Wolfgang Betz 130:770ce14d3d15 125 @brief Initialises anything required to start using BLE
Wolfgang Betz 130:770ce14d3d15 126 @param[in] void
Wolfgang Betz 130:770ce14d3d15 127 @returns ble_error_t
Wolfgang Betz 130:770ce14d3d15 128 */
Wolfgang Betz 130:770ce14d3d15 129 ble_error_t BlueNRGDevice::init(void)
Wolfgang Betz 130:770ce14d3d15 130 {
Wolfgang Betz 130:770ce14d3d15 131 // Set the interrupt handler for the device
Wolfgang Betz 130:770ce14d3d15 132 irq_.mode(PullNone); // betzw: set irq mode
Wolfgang Betz 130:770ce14d3d15 133 irq_.rise(&HCI_Isr);
Wolfgang Betz 130:770ce14d3d15 134
Wolfgang Betz 130:770ce14d3d15 135 /* ToDo: Clear memory contents, reset the SD, etc. */
Wolfgang Betz 132:51056160fa4a 136 // By default, we set the device GAP role to PERIPHERAL
Wolfgang Betz 132:51056160fa4a 137 btle_init(BlueNRGGap::getInstance().getIsSetAddress(), GAP_PERIPHERAL_ROLE_IDB04A1);
Wolfgang Betz 130:770ce14d3d15 138
Wolfgang Betz 130:770ce14d3d15 139 isInitialized = true;
Wolfgang Betz 130:770ce14d3d15 140
Wolfgang Betz 130:770ce14d3d15 141 return BLE_ERROR_NONE;
Wolfgang Betz 130:770ce14d3d15 142 }
Wolfgang Betz 130:770ce14d3d15 143
Wolfgang Betz 130:770ce14d3d15 144
Wolfgang Betz 130:770ce14d3d15 145 /**
Wolfgang Betz 130:770ce14d3d15 146 @brief Resets the BLE HW, removing any existing services and
Wolfgang Betz 130:770ce14d3d15 147 characteristics
Wolfgang Betz 130:770ce14d3d15 148 @param[in] void
Wolfgang Betz 130:770ce14d3d15 149 @returns ble_error_t
Wolfgang Betz 130:770ce14d3d15 150 */
Wolfgang Betz 130:770ce14d3d15 151 ble_error_t BlueNRGDevice::reset(void)
Wolfgang Betz 130:770ce14d3d15 152 {
Wolfgang Betz 130:770ce14d3d15 153 wait_us(500);
Wolfgang Betz 130:770ce14d3d15 154
Wolfgang Betz 130:770ce14d3d15 155 /* Reset BlueNRG SPI interface */
Wolfgang Betz 130:770ce14d3d15 156 rst_ = 0;
Wolfgang Betz 130:770ce14d3d15 157 wait_us(5);
Wolfgang Betz 130:770ce14d3d15 158 rst_ = 1;
Wolfgang Betz 130:770ce14d3d15 159 wait_us(5);
Wolfgang Betz 130:770ce14d3d15 160
Wolfgang Betz 130:770ce14d3d15 161 /* Wait for the radio to come back up */
Wolfgang Betz 130:770ce14d3d15 162 wait_us(500);
Wolfgang Betz 130:770ce14d3d15 163
Wolfgang Betz 130:770ce14d3d15 164 isInitialized = false;
Wolfgang Betz 130:770ce14d3d15 165
Wolfgang Betz 130:770ce14d3d15 166 return BLE_ERROR_NONE;
Wolfgang Betz 130:770ce14d3d15 167 }
Wolfgang Betz 130:770ce14d3d15 168
Wolfgang Betz 130:770ce14d3d15 169
Wolfgang Betz 130:770ce14d3d15 170 /*!
Wolfgang Betz 130:770ce14d3d15 171 @brief Wait for any BLE Event like BLE Connection, Read Request etc.
Wolfgang Betz 130:770ce14d3d15 172 @param[in] void
Wolfgang Betz 130:770ce14d3d15 173 @returns char *
Wolfgang Betz 130:770ce14d3d15 174 */
Wolfgang Betz 130:770ce14d3d15 175 void BlueNRGDevice::waitForEvent(void)
Wolfgang Betz 130:770ce14d3d15 176 {
Wolfgang Betz 130:770ce14d3d15 177 bool must_return = false;
Wolfgang Betz 130:770ce14d3d15 178
Wolfgang Betz 130:770ce14d3d15 179 do {
Wolfgang Betz 130:770ce14d3d15 180 BlueNRGGap::getInstance().Process();
Wolfgang Betz 130:770ce14d3d15 181
Wolfgang Betz 130:770ce14d3d15 182 HCI_Process();
Wolfgang Betz 130:770ce14d3d15 183
Wolfgang Betz 130:770ce14d3d15 184 if(must_return) return;
Wolfgang Betz 130:770ce14d3d15 185
Wolfgang Betz 130:770ce14d3d15 186 __WFE(); /* it is recommended that SEVONPEND in the
Wolfgang Betz 130:770ce14d3d15 187 System Control Register is NOT set */
Wolfgang Betz 130:770ce14d3d15 188 must_return = true; /* after returning from WFE we must guarantee
Wolfgang Betz 130:770ce14d3d15 189 that conrol is given back to main loop before next WFE */
Wolfgang Betz 130:770ce14d3d15 190 } while(true);
Wolfgang Betz 130:770ce14d3d15 191
Wolfgang Betz 130:770ce14d3d15 192 }
Wolfgang Betz 130:770ce14d3d15 193
Wolfgang Betz 130:770ce14d3d15 194
Wolfgang Betz 130:770ce14d3d15 195 /*!
Wolfgang Betz 130:770ce14d3d15 196 @brief get GAP version
Wolfgang Betz 130:770ce14d3d15 197 @param[in] void
Wolfgang Betz 130:770ce14d3d15 198 @returns char *
Wolfgang Betz 130:770ce14d3d15 199 */
Wolfgang Betz 130:770ce14d3d15 200 const char *BlueNRGDevice::getVersion(void)
Wolfgang Betz 130:770ce14d3d15 201 {
Wolfgang Betz 130:770ce14d3d15 202 char *version = new char[6];
Wolfgang Betz 130:770ce14d3d15 203 memcpy((void *)version, "1.0.0", 5);
Wolfgang Betz 130:770ce14d3d15 204 return version;
Wolfgang Betz 130:770ce14d3d15 205 }
Wolfgang Betz 130:770ce14d3d15 206
Wolfgang Betz 130:770ce14d3d15 207 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 208 /*!
Wolfgang Betz 130:770ce14d3d15 209 @brief get init state
Wolfgang Betz 130:770ce14d3d15 210 @param[in] void
Wolfgang Betz 130:770ce14d3d15 211 @returns bool
Wolfgang Betz 130:770ce14d3d15 212 */
Wolfgang Betz 130:770ce14d3d15 213 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 214 bool BlueNRGDevice::getIsInitialized(void)
Wolfgang Betz 130:770ce14d3d15 215 {
Wolfgang Betz 130:770ce14d3d15 216 return isInitialized;
Wolfgang Betz 130:770ce14d3d15 217 }
Wolfgang Betz 130:770ce14d3d15 218
Wolfgang Betz 130:770ce14d3d15 219 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 220 /*!
Wolfgang Betz 130:770ce14d3d15 221 @brief get reference to GAP object
Wolfgang Betz 130:770ce14d3d15 222 @param[in] void
Wolfgang Betz 130:770ce14d3d15 223 @returns Gap&
Wolfgang Betz 130:770ce14d3d15 224 */
Wolfgang Betz 130:770ce14d3d15 225 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 226 Gap &BlueNRGDevice::getGap()
Wolfgang Betz 130:770ce14d3d15 227 {
Wolfgang Betz 130:770ce14d3d15 228 return BlueNRGGap::getInstance();
Wolfgang Betz 130:770ce14d3d15 229 }
Wolfgang Betz 130:770ce14d3d15 230
Wolfgang Betz 130:770ce14d3d15 231 const Gap &BlueNRGDevice::getGap() const
Wolfgang Betz 130:770ce14d3d15 232 {
Wolfgang Betz 130:770ce14d3d15 233 return BlueNRGGap::getInstance();
Wolfgang Betz 130:770ce14d3d15 234 }
Wolfgang Betz 130:770ce14d3d15 235
Wolfgang Betz 130:770ce14d3d15 236 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 237 /*!
Wolfgang Betz 130:770ce14d3d15 238 @brief get reference to GATT server object
Wolfgang Betz 130:770ce14d3d15 239 @param[in] void
Wolfgang Betz 130:770ce14d3d15 240 @returns GattServer&
Wolfgang Betz 130:770ce14d3d15 241 */
Wolfgang Betz 130:770ce14d3d15 242 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 243 GattServer &BlueNRGDevice::getGattServer()
Wolfgang Betz 130:770ce14d3d15 244 {
Wolfgang Betz 130:770ce14d3d15 245 return BlueNRGGattServer::getInstance();
Wolfgang Betz 130:770ce14d3d15 246 }
Wolfgang Betz 130:770ce14d3d15 247
Wolfgang Betz 130:770ce14d3d15 248 const GattServer &BlueNRGDevice::getGattServer() const
Wolfgang Betz 130:770ce14d3d15 249 {
Wolfgang Betz 130:770ce14d3d15 250 return BlueNRGGattServer::getInstance();
Wolfgang Betz 130:770ce14d3d15 251 }
Wolfgang Betz 130:770ce14d3d15 252
Wolfgang Betz 130:770ce14d3d15 253 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 254 /*!
Wolfgang Betz 130:770ce14d3d15 255 @brief shut down the the BLE device
Wolfgang Betz 130:770ce14d3d15 256 @param[out] error if any
Wolfgang Betz 130:770ce14d3d15 257 */
Wolfgang Betz 130:770ce14d3d15 258 /**************************************************************************/
Wolfgang Betz 130:770ce14d3d15 259 ble_error_t BlueNRGDevice::shutdown(void) {
Wolfgang Betz 130:770ce14d3d15 260 return reset();
Wolfgang Betz 130:770ce14d3d15 261 }
Wolfgang Betz 130:770ce14d3d15 262
Wolfgang Betz 130:770ce14d3d15 263 /**
Wolfgang Betz 130:770ce14d3d15 264 * @brief Reads from BlueNRG SPI buffer and store data into local buffer.
Wolfgang Betz 130:770ce14d3d15 265 * @param buffer : Buffer where data from SPI are stored
Wolfgang Betz 130:770ce14d3d15 266 * @param buff_size: Buffer size
Wolfgang Betz 130:770ce14d3d15 267 * @retval int32_t : Number of read bytes
Wolfgang Betz 130:770ce14d3d15 268 */
Wolfgang Betz 130:770ce14d3d15 269 int32_t BlueNRGDevice::spiRead(uint8_t *buffer, uint8_t buff_size)
Wolfgang Betz 130:770ce14d3d15 270 {
Wolfgang Betz 130:770ce14d3d15 271 uint16_t byte_count;
Wolfgang Betz 130:770ce14d3d15 272 uint8_t len = 0;
Wolfgang Betz 130:770ce14d3d15 273 uint8_t char_ff = 0xff;
Wolfgang Betz 130:770ce14d3d15 274 volatile uint8_t read_char;
Wolfgang Betz 130:770ce14d3d15 275
Wolfgang Betz 130:770ce14d3d15 276 uint8_t i = 0;
Wolfgang Betz 130:770ce14d3d15 277 volatile uint8_t tmpreg;
Wolfgang Betz 130:770ce14d3d15 278
Wolfgang Betz 130:770ce14d3d15 279 uint8_t header_master[HEADER_SIZE] = {0x0b, 0x00, 0x00, 0x00, 0x00};
Wolfgang Betz 130:770ce14d3d15 280 uint8_t header_slave[HEADER_SIZE];
Wolfgang Betz 130:770ce14d3d15 281
Wolfgang Betz 130:770ce14d3d15 282 /* Select the chip */
Wolfgang Betz 130:770ce14d3d15 283 nCS_ = 0;
Wolfgang Betz 130:770ce14d3d15 284
Wolfgang Betz 130:770ce14d3d15 285 /* Read the header */
Wolfgang Betz 130:770ce14d3d15 286 for (i = 0; i < 5; i++)
Wolfgang Betz 130:770ce14d3d15 287 {
Wolfgang Betz 130:770ce14d3d15 288 tmpreg = spi_.write(header_master[i]);
Wolfgang Betz 130:770ce14d3d15 289 header_slave[i] = (uint8_t)(tmpreg);
Wolfgang Betz 130:770ce14d3d15 290 }
Wolfgang Betz 130:770ce14d3d15 291
Wolfgang Betz 130:770ce14d3d15 292 if (header_slave[0] == 0x02) {
Wolfgang Betz 130:770ce14d3d15 293 /* device is ready */
Wolfgang Betz 130:770ce14d3d15 294 byte_count = (header_slave[4]<<8)|header_slave[3];
Wolfgang Betz 130:770ce14d3d15 295
Wolfgang Betz 130:770ce14d3d15 296 if (byte_count > 0) {
Wolfgang Betz 130:770ce14d3d15 297
Wolfgang Betz 130:770ce14d3d15 298 /* avoid to read more data that size of the buffer */
Wolfgang Betz 130:770ce14d3d15 299 if (byte_count > buff_size){
Wolfgang Betz 130:770ce14d3d15 300 byte_count = buff_size;
Wolfgang Betz 130:770ce14d3d15 301 }
Wolfgang Betz 130:770ce14d3d15 302
Wolfgang Betz 130:770ce14d3d15 303 for (len = 0; len < byte_count; len++){
Wolfgang Betz 130:770ce14d3d15 304 read_char = spi_.write(char_ff);
Wolfgang Betz 130:770ce14d3d15 305 buffer[len] = read_char;
Wolfgang Betz 130:770ce14d3d15 306 }
Wolfgang Betz 130:770ce14d3d15 307 }
Wolfgang Betz 130:770ce14d3d15 308 }
Wolfgang Betz 130:770ce14d3d15 309 /* Release CS line to deselect the chip */
Wolfgang Betz 130:770ce14d3d15 310 nCS_ = 1;
Wolfgang Betz 130:770ce14d3d15 311
Wolfgang Betz 130:770ce14d3d15 312 // Add a small delay to give time to the BlueNRG to set the IRQ pin low
Wolfgang Betz 130:770ce14d3d15 313 // to avoid a useless SPI read at the end of the transaction
Wolfgang Betz 130:770ce14d3d15 314 for(volatile int i = 0; i < 2; i++)__NOP();
Wolfgang Betz 130:770ce14d3d15 315
Wolfgang Betz 130:770ce14d3d15 316 #ifdef PRINT_CSV_FORMAT
Wolfgang Betz 130:770ce14d3d15 317 if (len > 0) {
Wolfgang Betz 130:770ce14d3d15 318 print_csv_time();
Wolfgang Betz 130:770ce14d3d15 319 for (int i=0; i<len; i++) {
Wolfgang Betz 130:770ce14d3d15 320 PRINT_CSV(" %02x", buffer[i]);
Wolfgang Betz 130:770ce14d3d15 321 }
Wolfgang Betz 130:770ce14d3d15 322 PRINT_CSV("\n");
Wolfgang Betz 130:770ce14d3d15 323 }
Wolfgang Betz 130:770ce14d3d15 324 #endif
Wolfgang Betz 130:770ce14d3d15 325
Wolfgang Betz 130:770ce14d3d15 326 return len;
Wolfgang Betz 130:770ce14d3d15 327 }
Wolfgang Betz 130:770ce14d3d15 328
Wolfgang Betz 130:770ce14d3d15 329 /**
Wolfgang Betz 130:770ce14d3d15 330 * @brief Writes data from local buffer to SPI.
Wolfgang Betz 130:770ce14d3d15 331 * @param data1 : First data buffer to be written
Wolfgang Betz 130:770ce14d3d15 332 * @param data2 : Second data buffer to be written
Wolfgang Betz 130:770ce14d3d15 333 * @param Nb_bytes1: Size of first data buffer to be written
Wolfgang Betz 130:770ce14d3d15 334 * @param Nb_bytes2: Size of second data buffer to be written
Wolfgang Betz 130:770ce14d3d15 335 * @retval Number of read bytes
Wolfgang Betz 130:770ce14d3d15 336 */
Wolfgang Betz 130:770ce14d3d15 337 int32_t BlueNRGDevice::spiWrite(uint8_t* data1,
Wolfgang Betz 130:770ce14d3d15 338 uint8_t* data2, uint8_t Nb_bytes1, uint8_t Nb_bytes2)
Wolfgang Betz 130:770ce14d3d15 339 {
Wolfgang Betz 130:770ce14d3d15 340 int32_t result = 0;
Wolfgang Betz 130:770ce14d3d15 341 uint32_t i;
Wolfgang Betz 130:770ce14d3d15 342 volatile uint8_t tmpreg;
Wolfgang Betz 130:770ce14d3d15 343
Wolfgang Betz 130:770ce14d3d15 344 unsigned char header_master[HEADER_SIZE] = {0x0a, 0x00, 0x00, 0x00, 0x00};
Wolfgang Betz 130:770ce14d3d15 345 unsigned char header_slave[HEADER_SIZE] = {0xaa, 0x00, 0x00, 0x00, 0x00};
Wolfgang Betz 130:770ce14d3d15 346
Wolfgang Betz 130:770ce14d3d15 347 disable_irq();
Wolfgang Betz 130:770ce14d3d15 348
Wolfgang Betz 130:770ce14d3d15 349 /* CS reset */
Wolfgang Betz 130:770ce14d3d15 350 nCS_ = 0;
Wolfgang Betz 130:770ce14d3d15 351
Wolfgang Betz 130:770ce14d3d15 352 /* Exchange header */
Wolfgang Betz 130:770ce14d3d15 353 for (i = 0; i < 5; i++)
Wolfgang Betz 130:770ce14d3d15 354 {
Wolfgang Betz 130:770ce14d3d15 355 tmpreg = spi_.write(header_master[i]);
Wolfgang Betz 130:770ce14d3d15 356 header_slave[i] = tmpreg;
Wolfgang Betz 130:770ce14d3d15 357 }
Wolfgang Betz 130:770ce14d3d15 358
Wolfgang Betz 130:770ce14d3d15 359 if (header_slave[0] == 0x02) {
Wolfgang Betz 130:770ce14d3d15 360 /* SPI is ready */
Wolfgang Betz 130:770ce14d3d15 361 if (header_slave[1] >= (Nb_bytes1+Nb_bytes2)) {
Wolfgang Betz 130:770ce14d3d15 362
Wolfgang Betz 130:770ce14d3d15 363 /* Buffer is big enough */
Wolfgang Betz 130:770ce14d3d15 364 for (i = 0; i < Nb_bytes1; i++) {
Wolfgang Betz 130:770ce14d3d15 365 spi_.write(*(data1 + i));
Wolfgang Betz 130:770ce14d3d15 366 }
Wolfgang Betz 130:770ce14d3d15 367 for (i = 0; i < Nb_bytes2; i++) {
Wolfgang Betz 130:770ce14d3d15 368 spi_.write(*(data2 + i));
Wolfgang Betz 130:770ce14d3d15 369 }
Wolfgang Betz 130:770ce14d3d15 370 } else {
Wolfgang Betz 130:770ce14d3d15 371 /* Buffer is too small */
Wolfgang Betz 130:770ce14d3d15 372 result = -2;
Wolfgang Betz 130:770ce14d3d15 373 }
Wolfgang Betz 130:770ce14d3d15 374 } else {
Wolfgang Betz 130:770ce14d3d15 375 /* SPI is not ready */
Wolfgang Betz 130:770ce14d3d15 376 result = -1;
Wolfgang Betz 130:770ce14d3d15 377 }
Wolfgang Betz 130:770ce14d3d15 378
Wolfgang Betz 130:770ce14d3d15 379 /* Release CS line */
Wolfgang Betz 130:770ce14d3d15 380 //HAL_GPIO_WritePin(BNRG_SPI_CS_PORT, BNRG_SPI_CS_PIN, GPIO_PIN_SET);
Wolfgang Betz 130:770ce14d3d15 381 nCS_ = 1;
Wolfgang Betz 130:770ce14d3d15 382
Wolfgang Betz 130:770ce14d3d15 383 enable_irq();
Wolfgang Betz 130:770ce14d3d15 384
Wolfgang Betz 130:770ce14d3d15 385 return result;
Wolfgang Betz 130:770ce14d3d15 386 }
Wolfgang Betz 130:770ce14d3d15 387
Wolfgang Betz 130:770ce14d3d15 388 bool BlueNRGDevice::dataPresent()
Wolfgang Betz 130:770ce14d3d15 389 {
Wolfgang Betz 130:770ce14d3d15 390 return (irq_ == 1);
Wolfgang Betz 130:770ce14d3d15 391 }
Wolfgang Betz 130:770ce14d3d15 392
Wolfgang Betz 130:770ce14d3d15 393 void BlueNRGDevice::disable_irq()
Wolfgang Betz 130:770ce14d3d15 394 {
Wolfgang Betz 130:770ce14d3d15 395 irq_.disable_irq();
Wolfgang Betz 130:770ce14d3d15 396 }
Wolfgang Betz 130:770ce14d3d15 397
Wolfgang Betz 130:770ce14d3d15 398 void BlueNRGDevice::enable_irq()
Wolfgang Betz 130:770ce14d3d15 399 {
Wolfgang Betz 130:770ce14d3d15 400 irq_.enable_irq();
Wolfgang Betz 130:770ce14d3d15 401 }