Diff: TARGET_BLUEPILL/device/stm32f1xx.h

Revision:

6:661b2566f925

Parent:

5:6c702bf3e22c

Child:

7:276fab80bd78

diff -r 6c702bf3e22c -r 661b2566f925 TARGET_BLUEPILL/device/stm32f1xx.h
--- a/TARGET_BLUEPILL/device/stm32f1xx.h	Wed Jun 24 14:52:57 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,238 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f1xx.h
-  * @author  MCD Application Team
-  * @version V4.2.0
-  * @date    31-March-2017
-  * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
-  *
-  *          The file is the unique include file that the application programmer
-  *          is using in the C source code, usually in main.c. This file contains:
-  *            - Configuration section that allows to select:
-  *              - The STM32F1xx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e. 
-  *                code will be based on direct access to peripheral’s registers 
-  *                rather than drivers API), this option is controlled by 
-  *                "#define USE_HAL_DRIVER"
-  *  
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f1xx
-  * @{
-  */
-    
-#ifndef __STM32F1XX_H
-#define __STM32F1XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-  
-/** @addtogroup Library_configuration_section
-  * @{
-  */
-
-/**
-  * @brief STM32 Family
-  */
-#if !defined (STM32F1)
-#define STM32F1
-#endif /* STM32F1 */
-
-/* Uncomment the line below according to the target STM32L device used in your 
-   application 
-  */
-
-#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
-    !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
-    !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
-  /* #define STM32F100xB */   /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
-  /* #define STM32F100xE */   /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
-  /* #define STM32F101x6 */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
-  /* #define STM32F101xB */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
-  /* #define STM32F101xE */   /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
-  /* #define STM32F101xG */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
-  /* #define STM32F102x6 */   /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
-  /* #define STM32F102xB */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
-  /* #define STM32F103x6 */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
-#define STM32F103xB           /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
-  /* #define STM32F103xE */   /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
-  /* #define STM32F103xG */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
-  /* #define STM32F105xC */   /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
-  /* #define STM32F107xC */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */  
-#endif
-
-/*  Tip: To avoid modifying this file each time you need to switch between these
-        devices, you can define the device in your toolchain compiler preprocessor.
-  */
-  
-#if !defined  (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
-   In this case, these drivers will not be included and the application code will 
-   be based on direct access to peripherals registers 
-   */
-#define USE_HAL_DRIVER
-#endif /* USE_HAL_DRIVER */
-
-/**
-  * @brief CMSIS Device version number V4.2.0
-  */
-#define __STM32F1_CMSIS_VERSION_MAIN   (0x04) /*!< [31:24] main version */
-#define __STM32F1_CMSIS_VERSION_SUB1   (0x02) /*!< [23:16] sub1 version */
-#define __STM32F1_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
-#define __STM32F1_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
-#define __STM32F1_CMSIS_VERSION        ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
-                                       |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
-                                       |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
-                                       |(__STM32F1_CMSIS_VERSION_RC))
-
-/**
-  * @}
-  */
-
-/** @addtogroup Device_Included
-  * @{
-  */
-
-#if defined(STM32F100xB)
-  #include "stm32f100xb.h"
-#elif defined(STM32F100xE)
-  #include "stm32f100xe.h"
-#elif defined(STM32F101x6)
-  #include "stm32f101x6.h"
-#elif defined(STM32F101xB)
-  #include "stm32f101xb.h"
-#elif defined(STM32F101xE)
-  #include "stm32f101xe.h"
-#elif defined(STM32F101xG)
-  #include "stm32f101xg.h"
-#elif defined(STM32F102x6)
-  #include "stm32f102x6.h"
-#elif defined(STM32F102xB)
-  #include "stm32f102xb.h"
-#elif defined(STM32F103x6)
-  #include "stm32f103x6.h"
-#elif defined(STM32F103xB)
-  #include "stm32f103xb.h"
-#elif defined(STM32F103xE)
-  #include "stm32f103xe.h"
-#elif defined(STM32F103xG)
-  #include "stm32f103xg.h"
-#elif defined(STM32F105xC)
-  #include "stm32f105xc.h"
-#elif defined(STM32F107xC)
-  #include "stm32f107xc.h"
-#else
- #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
-#endif
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_types
-  * @{
-  */  
-typedef enum 
-{
-  RESET = 0, 
-  SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum 
-{
-  DISABLE = 0, 
-  ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum 
-{
-  ERROR = 0, 
-  SUCCESS = !ERROR
-} ErrorStatus;
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup Exported_macros
-  * @{
-  */
-#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT)    ((REG) & (BIT))
-
-#define CLEAR_REG(REG)        ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
-
-#define READ_REG(REG)         ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
-
-
-/**
-  * @}
-  */
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32f1xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32F1xx_H */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/