Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: TARGET_BLUEPILL/device/TOOLCHAIN_GCC_ARM/STM32F103XB.ld
- Revision:
- 6:661b2566f925
- Parent:
- 5:6c702bf3e22c
- Child:
- 7:276fab80bd78
diff -r 6c702bf3e22c -r 661b2566f925 TARGET_BLUEPILL/device/TOOLCHAIN_GCC_ARM/STM32F103XB.ld
--- a/TARGET_BLUEPILL/device/TOOLCHAIN_GCC_ARM/STM32F103XB.ld Wed Jun 24 14:52:57 2020 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,163 +0,0 @@
-/* Linker script to configure memory regions. */
-/* 0xEC reserved for vectors - 8byte aligned = 0xF0 */
-
-#if !defined(MBED_BOOT_STACK_SIZE)
- #define MBED_BOOT_STACK_SIZE 0x400
-#endif
-
-STACK_SIZE = MBED_BOOT_STACK_SIZE;
-
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
- RAM (rwx) : ORIGIN = 0x200000F0, LENGTH = 20K - (0xEC+0x4)
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- * _estack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
- _sidata = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- _sdata = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(8);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(8);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(8);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(8);
- /* All data end */
- __data_end__ = .;
- _edata = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(8);
- __bss_start__ = .;
- _sbss = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(8);
- __bss_end__ = .;
- _ebss = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- . = ORIGIN(RAM) + LENGTH(RAM) - STACK_SIZE;
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- _estack = __StackTop;
- __StackLimit = __StackTop - STACK_SIZE;
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-