Manchester code (phase encoding) library.
Dependents: Manchester_Transmitter Manchester_Receiver
Manchester code (phase encoding) library
It implements Manchester code according to both IEEE 802.3 and G.E. Thomas' conventions.
- A '0' is expressed by a high-to-low transition, a '1' by low-to-high transition in the IEEE 802.3 convention. The reverse is true in the G.E. Thomas' convention.
- The transitions which signify '0' or '1' occur at the midpoint of a period.
- Transitions at the start of a period are overhead and don't signify data.
- Least significant bit is sent first
- There are synchronization pulses (the number can be set) at the begin of transmission
Select a convention to be used by commenting or uncommenting the line below in theManchester.h
header file.
Manchester.h
#define G_E_THOMAS 1
The IEEE 802.3 convention is used by default.
A Manchester encoded message (using G.E. Thomas' convention), with one sync pulse in the preamble, carrying four bytes:
ACKNOWLEDGEMENT: The code in this library was based on this article published by Robert Guastella.
Import programManchester_Transmitter
Manchester transmitter demo.
Import programManchester_Receiver
Manchester receiver demo.
NOTE: To perform a simple test (without radio modules) connect the txPin on transmitter board to the rxPin on the receiver board and make sure that grounds are also connected one another.
Diff: Manchester.cpp
- Revision:
- 4:f2c392191c74
- Parent:
- 3:03109c995123
- Child:
- 5:3b2c7e9fda3f
diff -r 03109c995123 -r f2c392191c74 Manchester.cpp --- a/Manchester.cpp Thu May 18 10:20:55 2017 +0000 +++ b/Manchester.cpp Thu May 18 13:37:21 2017 +0000 @@ -42,7 +42,7 @@ PinName txPin, PinName rxPin, uint32_t speed /* = 1200 bps */, - uint8_t tol /* = 20% */ + uint8_t tol /* = 20% */ ) : _tx(txPin), _rx(rxPin) { @@ -161,8 +161,7 @@ /** * @brief Receives message - * @note Waits until a message is received - * or receive timeout occured + * @note Waits until a message is received or 'receive timeout' occured * @param msg Container to store the received message * @retval true On success * false Otherwise