Manchester code (phase encoding) library.
Dependents: Manchester_Transmitter Manchester_Receiver
Manchester code (phase encoding) library
It implements Manchester code according to both IEEE 802.3 and G.E. Thomas' conventions.
- A '0' is expressed by a high-to-low transition, a '1' by low-to-high transition in the IEEE 802.3 convention. The reverse is true in the G.E. Thomas' convention.
- The transitions which signify '0' or '1' occur at the midpoint of a period.
- Transitions at the start of a period are overhead and don't signify data.
- Least significant bit is sent first
- There are synchronization pulses (the number can be set) at the begin of transmission
Select a convention to be used by commenting or uncommenting the line below in theManchester.h
header file.
Manchester.h
#define G_E_THOMAS 1
The IEEE 802.3 convention is used by default.
A Manchester encoded message (using G.E. Thomas' convention), with one sync pulse in the preamble, carrying four bytes:
ACKNOWLEDGEMENT: The code in this library was based on this article published by Robert Guastella.
Import programManchester_Transmitter
Manchester transmitter demo.
Import programManchester_Receiver
Manchester receiver demo.
NOTE: To perform a simple test (without radio modules) connect the txPin on transmitter board to the rxPin on the receiver board and make sure that grounds are also connected one another.
Diff: Manchester.h
- Revision:
- 2:de778df5892c
- Parent:
- 1:11292d238e50
- Child:
- 5:3b2c7e9fda3f
diff -r 11292d238e50 -r de778df5892c Manchester.h --- a/Manchester.h Wed May 17 08:17:13 2017 +0000 +++ b/Manchester.h Wed May 17 21:02:49 2017 +0000 @@ -2,7 +2,7 @@ ****************************************************************************** * @file Manchester.h * @author Zoltan Hudak - * @version + * @version * @date 16-May-2017 * @brief Manchester code for mbed ****************************************************************************** @@ -25,7 +25,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ - + #ifndef MANCHESTER_H #define MANCHESTER_H @@ -47,35 +47,37 @@ DECODE, ERROR }; - + public: Manchester ( PinName txPin, /* transmitter pin name */ PinName rxPin, /* receiver pin name */ - uint32_t speed = 1200 /* speed in bits per second */, - uint8_t tol = 20 /* pulse width tolerance (+/-) in % */ + uint32_t speed = 1200 /* speed in bits per second */, + uint8_t tol = 20 /* pulse width tolerance (+/-) in % */ ); - ~Manchester(void) { }; + ~Manchester(void) { } void transmit(ManchesterMsg& msg); bool receive(ManchesterMsg& msg); - + private: DigitalOut _tx; // transmitter line InterruptIn _rx; // receiver line Ticker _txTicker; // transmitter ticker - Timeout _rxTimeout; // receiver timeout + Timeout _timeout; // timeout (watchdog) uint32_t _midBitTime; // mid-bit time [us] uint32_t _minPulseWidth; // minimum pulse width [us] uint32_t _maxPulseWidth; // maximum pulse width [us] State _state; // state char* _data; // data array - uint8_t _len; // data length in bytes - uint8_t _maxLen; // maximum length - + size_t _len; // data length in bytes + size_t _maxLen; // maximum length + void transmission(void); void reception(void); + void txTimeout(void); void rxTimeout(void); }; #endif // MANCHESTER_H +