Zoltan Hudak / Mbed 2 deprecated Mach3_Jogpad

Jogpad for the Mach3 CNC control software with Maple Mini board (STM32F103CBT6).

Dependencies:   mbed mbed-MapleMini USBDevice_STM32F103

Homepage

Table of Contents

    Mach3 Jogpad

    Jogpad for the Mach3 CNC control software with Maple Mini board (STM32F103CBT6). Have a look also at the MapleMini USBSerial. Communication with the PC and power supply is over a USB cable. Since the Jogpad is a USB HID (Human Interface Device) no USB driver has to be installed to the PC (as such is available on each MS Windows PC by default).

    If you'd like to build a USBJoystick Device have a look at Wim's wonderful page.

    Schematic

    https://os.mbed.com/media/uploads/hudakz/jogpad_schematic_01.png

    Board design

    https://os.mbed.com/media/uploads/hudakz/jogpad_board_01.png

    Because zip files cannot be uploaded to mbed wiki pages anymore, in order to download the zipped eagle project files right-click on the link and select Save link as.... Once saved to your local drive, change the extension from png to zip and then unzip.

    Board assembled

    https://os.mbed.com/media/uploads/hudakz/jogpad_device_01.jpg

    All wikipages