MQTT client test with W5200 ethernet shield
Dependents: IBMIoTClientEthernetExample_W5200
Fork of W5500Interface by
Diff: EthernetInterface.h
- Revision:
- 0:e11e8793c3ce
- Child:
- 5:8aefaef88f79
diff -r 000000000000 -r e11e8793c3ce EthernetInterface.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/EthernetInterface.h Wed Aug 20 00:28:37 2014 +0000 @@ -0,0 +1,88 @@ +// EthernetInterface for W5500 2014/8/20 + +#pragma once +#include "wiznet.h" + + /** Interface using Wiznet W5500 chip to connect to an IP-based network + * + */ +class EthernetInterface: public WIZnet_Chip { +public: + + /** + * Constructor + * + * \param mosi mbed pin to use for SPI + * \param miso mbed pin to use for SPI + * \param sclk mbed pin to use for SPI + * \param cs chip select of the WIZnet_Chip + * \param reset reset pin of the WIZnet_Chip + */ + EthernetInterface(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName reset); + EthernetInterface(SPI* spi, PinName cs, PinName reset); + + /** Initialize the interface with DHCP w/o MAC address + * Initialize the interface and configure it to use DHCP (no connection at this point). + * \return 0 on success, a negative number on failure + */ + int init(); //With DHCP + /** Initialize the interface with DHCP. + * Initialize the interface and configure it to use DHCP (no connection at this point). + * \param mac the MAC address to use + * \return 0 on success, a negative number on failure + */ + int init(uint8_t * mac); //With DHCP + + /** Initialize the interface with a static IP address without MAC. + * Initialize the interface and configure it with the following static configuration (no connection at this point). + * \param ip the IP address to use + * \param mask the IP address mask + * \param gateway the gateway to use + * \return 0 on success, a negative number on failure + */ + + int init(const char* ip, const char* mask, const char* gateway); + /** Initialize the interface with a static IP address. + * Initialize the interface and configure it with the following static configuration (no connection at this point). + * \param mac the MAC address to use + * \param ip the IP address to use + * \param mask the IP address mask + * \param gateway the gateway to use + * \return 0 on success, a negative number on failure + */ + int init(uint8_t * mac, const char* ip, const char* mask, const char* gateway); + + /** Connect + * Bring the interface up, start DHCP if needed. + * \return 0 on success, a negative number on failure + */ + int connect(); + + /** Disconnect + * Bring the interface down + * \return 0 on success, a negative number on failure + */ + int disconnect(); + + /** Get IP address + * + * @ returns ip address + */ + char* getIPAddress(); + char* getNetworkMask(); + char* getGateway(); + char* getMACAddress(); + + int IPrenew(int timeout_ms = 15*1000); + +private: + char ip_string[20]; + char mask_string[20]; + char gw_string[20]; + char mac_string[20]; + bool ip_set; +}; + +#include "TCPSocketConnection.h" +#include "TCPSocketServer.h" +#include "UDPSocket.h"