MQTT client test with W5200 ethernet shield
Dependents: IBMIoTClientEthernetExample_W5200
Fork of W5500Interface by
EthernetInterface.h
- Committer:
- kaizen
- Date:
- 2014-09-26
- Revision:
- 5:8aefaef88f79
- Parent:
- 0:e11e8793c3ce
- Child:
- 6:677dfa3984d1
File content as of revision 5:8aefaef88f79:
// EthernetInterface for W5500 2014/8/20 #pragma once #include "wiznet.h" /** Interface using Wiznet W5500 chip to connect to an IP-based network * */ class EthernetInterface: public WIZnet_Chip { public: /** * Constructor * * \param mosi mbed pin to use for SPI * \param miso mbed pin to use for SPI * \param sclk mbed pin to use for SPI * \param cs chip select of the WIZnet_Chip * \param reset reset pin of the WIZnet_Chip */ EthernetInterface(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName reset); EthernetInterface(SPI* spi, PinName cs, PinName reset); // EthernetInterface(); /** Initialize the interface with DHCP w/o MAC address * Initialize the interface and configure it to use DHCP (no connection at this point). * \return 0 on success, a negative number on failure */ int init(); //With DHCP /** Initialize the interface with DHCP. * Initialize the interface and configure it to use DHCP (no connection at this point). * \param mac the MAC address to use * \return 0 on success, a negative number on failure */ int init(uint8_t * mac); //With DHCP /** Initialize the interface with a static IP address without MAC. * Initialize the interface and configure it with the following static configuration (no connection at this point). * \param ip the IP address to use * \param mask the IP address mask * \param gateway the gateway to use * \return 0 on success, a negative number on failure */ int init(const char* ip, const char* mask, const char* gateway); /** Initialize the interface with a static IP address. * Initialize the interface and configure it with the following static configuration (no connection at this point). * \param mac the MAC address to use * \param ip the IP address to use * \param mask the IP address mask * \param gateway the gateway to use * \return 0 on success, a negative number on failure */ int init(uint8_t * mac, const char* ip, const char* mask, const char* gateway); /** Connect * Bring the interface up, start DHCP if needed. * \return 0 on success, a negative number on failure */ int connect(); /** Disconnect * Bring the interface down * \return 0 on success, a negative number on failure */ int disconnect(); /** Get IP address * * @ returns ip address */ char* getIPAddress(); char* getNetworkMask(); char* getGateway(); char* getMACAddress(); int IPrenew(int timeout_ms = 15*1000); private: char ip_string[20]; char mask_string[20]; char gw_string[20]; char mac_string[20]; bool ip_set; }; #include "TCPSocketConnection.h" #include "TCPSocketServer.h" #include "UDPSocket.h"