Gary Servin / ros_lib_melodic

ROS Serial library for Mbed platforms for ROS Melodic Morenia. Check http://wiki.ros.org/rosserial_mbed/ for more information.

Dependencies:   BufferedSerial

Dependents:   rosserial_mbed_hello_world_publisher_melodic Motortest Nucleo_vr_servo_project NucleoFM ... more

ROSSerial_mbed for Melodic Distribution

The Robot Operating System (ROS) is a flexible framework for writing robot software. It is a collection of tools, libraries, and conventions that aim to simplify the task of creating complex and robust robot behavior across a wide variety of robotic platforms.

The rosserial_mbed package allows to write ROS nodes on any mbed enabled devices and have them connected to a running ROS system on your computer using the serial port.

Hello World (example publisher)

Import programrosserial_mbed_hello_world_publisher_melodic

rosserial_mbed Hello World example for Melodic Morenia distribution

Last commit 08 Nov 2019 by Gary Servin

Running the Code

Now, launch the roscore in a new terminal window:

Quote:

$ roscore

Next, run the rosserial client application that forwards your MBED messages to the rest of ROS. Make sure to use the correct serial port:

Quote:

$ rosrun rosserial_python serial_node.py /dev/ttyACM0

Finally, watch the greetings come in from your MBED by launching a new terminal window and entering :

Quote:

$ rostopic echo chatter

See Also

More examples

Blink

/*
 * rosserial Subscriber Example
 * Blinks an LED on callback
 */
#include "mbed.h"
#include <ros.h>
#include <std_msgs/Empty.h>

ros::NodeHandle nh;
DigitalOut myled(LED1);

void messageCb(const std_msgs::Empty& toggle_msg){
    myled = !myled;   // blink the led
}

ros::Subscriber<std_msgs::Empty> sub("toggle_led", &messageCb);

int main() {
    nh.initNode();
    nh.subscribe(sub);

    while (1) {
        nh.spinOnce();
        wait_ms(1);
    }
}

Push

/*
 * Button Example for Rosserial
 */

#include "mbed.h"
#include <ros.h>
#include <std_msgs/Bool.h>

PinName button = p20;

ros::NodeHandle nh;

std_msgs::Bool pushed_msg;
ros::Publisher pub_button("pushed", &pushed_msg);

DigitalIn button_pin(button);
DigitalOut led_pin(LED1);

bool last_reading;
long last_debounce_time=0;
long debounce_delay=50;
bool published = true;

Timer t;
int main() {
    t.start();
    nh.initNode();
    nh.advertise(pub_button);

    //Enable the pullup resistor on the button
    button_pin.mode(PullUp);

    //The button is a normally button
    last_reading = ! button_pin;

    while (1) {
        bool reading = ! button_pin;

        if (last_reading!= reading) {
            last_debounce_time = t.read_ms();
            published = false;
        }

        //if the button value has not changed for the debounce delay, we know its stable
        if ( !published && (t.read_ms() - last_debounce_time)  > debounce_delay) {
            led_pin = reading;
            pushed_msg.data = reading;
            pub_button.publish(&pushed_msg);
            published = true;
        }

        last_reading = reading;

        nh.spinOnce();
    }
}

Diff: sensor_msgs/LaserEcho.h

Revision:
0:04ac6be8229a
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/sensor_msgs/LaserEcho.h	Fri Nov 08 14:38:09 2019 -0300
@@ -0,0 +1,82 @@
+#ifndef _ROS_sensor_msgs_LaserEcho_h
+#define _ROS_sensor_msgs_LaserEcho_h
+
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+#include "ros/msg.h"
+
+namespace sensor_msgs
+{
+
+  class LaserEcho : public ros::Msg
+  {
+    public:
+      uint32_t echoes_length;
+      typedef float _echoes_type;
+      _echoes_type st_echoes;
+      _echoes_type * echoes;
+
+    LaserEcho():
+      echoes_length(0), echoes(NULL)
+    {
+    }
+
+    virtual int serialize(unsigned char *outbuffer) const
+    {
+      int offset = 0;
+      *(outbuffer + offset + 0) = (this->echoes_length >> (8 * 0)) & 0xFF;
+      *(outbuffer + offset + 1) = (this->echoes_length >> (8 * 1)) & 0xFF;
+      *(outbuffer + offset + 2) = (this->echoes_length >> (8 * 2)) & 0xFF;
+      *(outbuffer + offset + 3) = (this->echoes_length >> (8 * 3)) & 0xFF;
+      offset += sizeof(this->echoes_length);
+      for( uint32_t i = 0; i < echoes_length; i++){
+      union {
+        float real;
+        uint32_t base;
+      } u_echoesi;
+      u_echoesi.real = this->echoes[i];
+      *(outbuffer + offset + 0) = (u_echoesi.base >> (8 * 0)) & 0xFF;
+      *(outbuffer + offset + 1) = (u_echoesi.base >> (8 * 1)) & 0xFF;
+      *(outbuffer + offset + 2) = (u_echoesi.base >> (8 * 2)) & 0xFF;
+      *(outbuffer + offset + 3) = (u_echoesi.base >> (8 * 3)) & 0xFF;
+      offset += sizeof(this->echoes[i]);
+      }
+      return offset;
+    }
+
+    virtual int deserialize(unsigned char *inbuffer)
+    {
+      int offset = 0;
+      uint32_t echoes_lengthT = ((uint32_t) (*(inbuffer + offset))); 
+      echoes_lengthT |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1); 
+      echoes_lengthT |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2); 
+      echoes_lengthT |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3); 
+      offset += sizeof(this->echoes_length);
+      if(echoes_lengthT > echoes_length)
+        this->echoes = (float*)realloc(this->echoes, echoes_lengthT * sizeof(float));
+      echoes_length = echoes_lengthT;
+      for( uint32_t i = 0; i < echoes_length; i++){
+      union {
+        float real;
+        uint32_t base;
+      } u_st_echoes;
+      u_st_echoes.base = 0;
+      u_st_echoes.base |= ((uint32_t) (*(inbuffer + offset + 0))) << (8 * 0);
+      u_st_echoes.base |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1);
+      u_st_echoes.base |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2);
+      u_st_echoes.base |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3);
+      this->st_echoes = u_st_echoes.real;
+      offset += sizeof(this->st_echoes);
+        memcpy( &(this->echoes[i]), &(this->st_echoes), sizeof(float));
+      }
+     return offset;
+    }
+
+    const char * getType(){ return "sensor_msgs/LaserEcho"; };
+    const char * getMD5(){ return "8bc5ae449b200fba4d552b4225586696"; };
+
+  };
+
+}
+#endif