Gary Servin / ros_lib_kinetic

ROS Serial library for Mbed platforms for ROS Kinetic Kame. Check http://wiki.ros.org/rosserial_mbed/ for more information.

Dependencies:   BufferedSerial

Dependents:   rosserial_mbed_hello_world_publisher_kinetic s-rov-firmware ROS_HCSR04 DISCO-F469NI_LCDTS_demo ... more

ROSSerial_mbed for Kinetic Distribution

The Robot Operating System (ROS) is a flexible framework for writing robot software. It is a collection of tools, libraries, and conventions that aim to simplify the task of creating complex and robust robot behavior across a wide variety of robotic platforms.

The rosserial_mbed package allows to write ROS nodes on any mbed enabled devices and have them connected to a running ROS system on your computer using the serial port.

Hello World (example publisher)

Import programrosserial_mbed_hello_world_publisher_kinetic

rosserial_mbed Hello World example for Kinetic Kame distribution

Last commit 31 Dec 2016 by Gary Servin

Running the Code

Now, launch the roscore in a new terminal window:

Quote:

$ roscore

Next, run the rosserial client application that forwards your MBED messages to the rest of ROS. Make sure to use the correct serial port:

Quote:

$ rosrun rosserial_python serial_node.py /dev/ttyACM0

Finally, watch the greetings come in from your MBED by launching a new terminal window and entering :

Quote:

$ rostopic echo chatter

See Also

More examples

Blink

/*
 * rosserial Subscriber Example
 * Blinks an LED on callback
 */
#include "mbed.h"
#include <ros.h>
#include <std_msgs/Empty.h>

ros::NodeHandle nh;
DigitalOut myled(LED1);

void messageCb(const std_msgs::Empty& toggle_msg){
    myled = !myled;   // blink the led
}

ros::Subscriber<std_msgs::Empty> sub("toggle_led", &messageCb);

int main() {
    nh.initNode();
    nh.subscribe(sub);

    while (1) {
        nh.spinOnce();
        wait_ms(1);
    }
}

Push

/*
 * Button Example for Rosserial
 */

#include "mbed.h"
#include <ros.h>
#include <std_msgs/Bool.h>

PinName button = p20;

ros::NodeHandle nh;

std_msgs::Bool pushed_msg;
ros::Publisher pub_button("pushed", &pushed_msg);

DigitalIn button_pin(button);
DigitalOut led_pin(LED1);

bool last_reading;
long last_debounce_time=0;
long debounce_delay=50;
bool published = true;

Timer t;
int main() {
    t.start();
    nh.initNode();
    nh.advertise(pub_button);

    //Enable the pullup resistor on the button
    button_pin.mode(PullUp);

    //The button is a normally button
    last_reading = ! button_pin;

    while (1) {
        bool reading = ! button_pin;

        if (last_reading!= reading) {
            last_debounce_time = t.read_ms();
            published = false;
        }

        //if the button value has not changed for the debounce delay, we know its stable
        if ( !published && (t.read_ms() - last_debounce_time)  > debounce_delay) {
            led_pin = reading;
            pushed_msg.data = reading;
            pub_button.publish(&pushed_msg);
            published = true;
        }

        last_reading = reading;

        nh.spinOnce();
    }
}

Diff: gazebo_msgs/SetModelConfiguration.h

Revision:
0:9e9b7db60fd5
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gazebo_msgs/SetModelConfiguration.h	Sat Dec 31 00:48:34 2016 +0000
@@ -0,0 +1,228 @@
+#ifndef _ROS_SERVICE_SetModelConfiguration_h
+#define _ROS_SERVICE_SetModelConfiguration_h
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+#include "ros/msg.h"
+
+namespace gazebo_msgs
+{
+
+static const char SETMODELCONFIGURATION[] = "gazebo_msgs/SetModelConfiguration";
+
+  class SetModelConfigurationRequest : public ros::Msg
+  {
+    public:
+      typedef const char* _model_name_type;
+      _model_name_type model_name;
+      typedef const char* _urdf_param_name_type;
+      _urdf_param_name_type urdf_param_name;
+      uint32_t joint_names_length;
+      typedef char* _joint_names_type;
+      _joint_names_type st_joint_names;
+      _joint_names_type * joint_names;
+      uint32_t joint_positions_length;
+      typedef double _joint_positions_type;
+      _joint_positions_type st_joint_positions;
+      _joint_positions_type * joint_positions;
+
+    SetModelConfigurationRequest():
+      model_name(""),
+      urdf_param_name(""),
+      joint_names_length(0), joint_names(NULL),
+      joint_positions_length(0), joint_positions(NULL)
+    {
+    }
+
+    virtual int serialize(unsigned char *outbuffer) const
+    {
+      int offset = 0;
+      uint32_t length_model_name = strlen(this->model_name);
+      varToArr(outbuffer + offset, length_model_name);
+      offset += 4;
+      memcpy(outbuffer + offset, this->model_name, length_model_name);
+      offset += length_model_name;
+      uint32_t length_urdf_param_name = strlen(this->urdf_param_name);
+      varToArr(outbuffer + offset, length_urdf_param_name);
+      offset += 4;
+      memcpy(outbuffer + offset, this->urdf_param_name, length_urdf_param_name);
+      offset += length_urdf_param_name;
+      *(outbuffer + offset + 0) = (this->joint_names_length >> (8 * 0)) & 0xFF;
+      *(outbuffer + offset + 1) = (this->joint_names_length >> (8 * 1)) & 0xFF;
+      *(outbuffer + offset + 2) = (this->joint_names_length >> (8 * 2)) & 0xFF;
+      *(outbuffer + offset + 3) = (this->joint_names_length >> (8 * 3)) & 0xFF;
+      offset += sizeof(this->joint_names_length);
+      for( uint32_t i = 0; i < joint_names_length; i++){
+      uint32_t length_joint_namesi = strlen(this->joint_names[i]);
+      varToArr(outbuffer + offset, length_joint_namesi);
+      offset += 4;
+      memcpy(outbuffer + offset, this->joint_names[i], length_joint_namesi);
+      offset += length_joint_namesi;
+      }
+      *(outbuffer + offset + 0) = (this->joint_positions_length >> (8 * 0)) & 0xFF;
+      *(outbuffer + offset + 1) = (this->joint_positions_length >> (8 * 1)) & 0xFF;
+      *(outbuffer + offset + 2) = (this->joint_positions_length >> (8 * 2)) & 0xFF;
+      *(outbuffer + offset + 3) = (this->joint_positions_length >> (8 * 3)) & 0xFF;
+      offset += sizeof(this->joint_positions_length);
+      for( uint32_t i = 0; i < joint_positions_length; i++){
+      union {
+        double real;
+        uint64_t base;
+      } u_joint_positionsi;
+      u_joint_positionsi.real = this->joint_positions[i];
+      *(outbuffer + offset + 0) = (u_joint_positionsi.base >> (8 * 0)) & 0xFF;
+      *(outbuffer + offset + 1) = (u_joint_positionsi.base >> (8 * 1)) & 0xFF;
+      *(outbuffer + offset + 2) = (u_joint_positionsi.base >> (8 * 2)) & 0xFF;
+      *(outbuffer + offset + 3) = (u_joint_positionsi.base >> (8 * 3)) & 0xFF;
+      *(outbuffer + offset + 4) = (u_joint_positionsi.base >> (8 * 4)) & 0xFF;
+      *(outbuffer + offset + 5) = (u_joint_positionsi.base >> (8 * 5)) & 0xFF;
+      *(outbuffer + offset + 6) = (u_joint_positionsi.base >> (8 * 6)) & 0xFF;
+      *(outbuffer + offset + 7) = (u_joint_positionsi.base >> (8 * 7)) & 0xFF;
+      offset += sizeof(this->joint_positions[i]);
+      }
+      return offset;
+    }
+
+    virtual int deserialize(unsigned char *inbuffer)
+    {
+      int offset = 0;
+      uint32_t length_model_name;
+      arrToVar(length_model_name, (inbuffer + offset));
+      offset += 4;
+      for(unsigned int k= offset; k< offset+length_model_name; ++k){
+          inbuffer[k-1]=inbuffer[k];
+      }
+      inbuffer[offset+length_model_name-1]=0;
+      this->model_name = (char *)(inbuffer + offset-1);
+      offset += length_model_name;
+      uint32_t length_urdf_param_name;
+      arrToVar(length_urdf_param_name, (inbuffer + offset));
+      offset += 4;
+      for(unsigned int k= offset; k< offset+length_urdf_param_name; ++k){
+          inbuffer[k-1]=inbuffer[k];
+      }
+      inbuffer[offset+length_urdf_param_name-1]=0;
+      this->urdf_param_name = (char *)(inbuffer + offset-1);
+      offset += length_urdf_param_name;
+      uint32_t joint_names_lengthT = ((uint32_t) (*(inbuffer + offset))); 
+      joint_names_lengthT |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1); 
+      joint_names_lengthT |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2); 
+      joint_names_lengthT |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3); 
+      offset += sizeof(this->joint_names_length);
+      if(joint_names_lengthT > joint_names_length)
+        this->joint_names = (char**)realloc(this->joint_names, joint_names_lengthT * sizeof(char*));
+      joint_names_length = joint_names_lengthT;
+      for( uint32_t i = 0; i < joint_names_length; i++){
+      uint32_t length_st_joint_names;
+      arrToVar(length_st_joint_names, (inbuffer + offset));
+      offset += 4;
+      for(unsigned int k= offset; k< offset+length_st_joint_names; ++k){
+          inbuffer[k-1]=inbuffer[k];
+      }
+      inbuffer[offset+length_st_joint_names-1]=0;
+      this->st_joint_names = (char *)(inbuffer + offset-1);
+      offset += length_st_joint_names;
+        memcpy( &(this->joint_names[i]), &(this->st_joint_names), sizeof(char*));
+      }
+      uint32_t joint_positions_lengthT = ((uint32_t) (*(inbuffer + offset))); 
+      joint_positions_lengthT |= ((uint32_t) (*(inbuffer + offset + 1))) << (8 * 1); 
+      joint_positions_lengthT |= ((uint32_t) (*(inbuffer + offset + 2))) << (8 * 2); 
+      joint_positions_lengthT |= ((uint32_t) (*(inbuffer + offset + 3))) << (8 * 3); 
+      offset += sizeof(this->joint_positions_length);
+      if(joint_positions_lengthT > joint_positions_length)
+        this->joint_positions = (double*)realloc(this->joint_positions, joint_positions_lengthT * sizeof(double));
+      joint_positions_length = joint_positions_lengthT;
+      for( uint32_t i = 0; i < joint_positions_length; i++){
+      union {
+        double real;
+        uint64_t base;
+      } u_st_joint_positions;
+      u_st_joint_positions.base = 0;
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 0))) << (8 * 0);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 1))) << (8 * 1);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 2))) << (8 * 2);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 3))) << (8 * 3);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 4))) << (8 * 4);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 5))) << (8 * 5);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 6))) << (8 * 6);
+      u_st_joint_positions.base |= ((uint64_t) (*(inbuffer + offset + 7))) << (8 * 7);
+      this->st_joint_positions = u_st_joint_positions.real;
+      offset += sizeof(this->st_joint_positions);
+        memcpy( &(this->joint_positions[i]), &(this->st_joint_positions), sizeof(double));
+      }
+     return offset;
+    }
+
+    const char * getType(){ return SETMODELCONFIGURATION; };
+    const char * getMD5(){ return "160eae60f51fabff255480c70afa289f"; };
+
+  };
+
+  class SetModelConfigurationResponse : public ros::Msg
+  {
+    public:
+      typedef bool _success_type;
+      _success_type success;
+      typedef const char* _status_message_type;
+      _status_message_type status_message;
+
+    SetModelConfigurationResponse():
+      success(0),
+      status_message("")
+    {
+    }
+
+    virtual int serialize(unsigned char *outbuffer) const
+    {
+      int offset = 0;
+      union {
+        bool real;
+        uint8_t base;
+      } u_success;
+      u_success.real = this->success;
+      *(outbuffer + offset + 0) = (u_success.base >> (8 * 0)) & 0xFF;
+      offset += sizeof(this->success);
+      uint32_t length_status_message = strlen(this->status_message);
+      varToArr(outbuffer + offset, length_status_message);
+      offset += 4;
+      memcpy(outbuffer + offset, this->status_message, length_status_message);
+      offset += length_status_message;
+      return offset;
+    }
+
+    virtual int deserialize(unsigned char *inbuffer)
+    {
+      int offset = 0;
+      union {
+        bool real;
+        uint8_t base;
+      } u_success;
+      u_success.base = 0;
+      u_success.base |= ((uint8_t) (*(inbuffer + offset + 0))) << (8 * 0);
+      this->success = u_success.real;
+      offset += sizeof(this->success);
+      uint32_t length_status_message;
+      arrToVar(length_status_message, (inbuffer + offset));
+      offset += 4;
+      for(unsigned int k= offset; k< offset+length_status_message; ++k){
+          inbuffer[k-1]=inbuffer[k];
+      }
+      inbuffer[offset+length_status_message-1]=0;
+      this->status_message = (char *)(inbuffer + offset-1);
+      offset += length_status_message;
+     return offset;
+    }
+
+    const char * getType(){ return SETMODELCONFIGURATION; };
+    const char * getMD5(){ return "2ec6f3eff0161f4257b808b12bc830c2"; };
+
+  };
+
+  class SetModelConfiguration {
+    public:
+    typedef SetModelConfigurationRequest Request;
+    typedef SetModelConfigurationResponse Response;
+  };
+
+}
+#endif