Mini-DK board overview (Micro SD connector is at the bottom side)

One serial interface , uses CP2102 (USB to RS232 interface, support ISP download )

RJ45-10/100M Ethernet network interface (Ethernet PHY: DM9161)

2.8 inch TFT color LCD interface (SPI interface or 16Bit parallel interface)

Touch panel controller XPT2046 (ADS7843 compatible)

USB 2.0 interface, USB host and USB Device interface.

TF SD / MMC card (SPI) interface.

Two user buttons, One Reset button and ISP button , One INT0 button, two user-programmable LED lights

Serial ISP download, Standard 20-pin JTAG download simulation debugging interface.

Selection between external 5V power supply or USB 5V supply.

Board size: 95mm * 78mm

All IO available on extension connectors

04/01/13

Erik Olieman (http://mbed.org/users/Sissors/) joined the code development for the Mini-DK board.

Thanks to his input, we were able to obtain a tremendous speed gain, remove warnings, ...

An overview of all modifications is stored in modifs.h

The old page (http://mbed.org/users/frankvnk/code/LPC1768_Mini-DK/) contains the demo code.

IMPORTANT : Due to a change in the mbed libraries (Stream()), we cannot use the printf instruction - we need to use <SPI_TFT>.printf (example - see main.cpp in http://mbed.org/users/frankvnk/code/LPC1768_Mini-DK/)