Diff: GapAdvertisingParams.cpp

Revision:

106:a20be740075d

Parent:

105:f29ab9f74d7e

Child:

107:bd10367dfd1c

--- a/GapAdvertisingParams.cpp	Fri Jul 11 14:39:17 2014 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,129 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "blecommon.h"
-#include "GapAdvertisingParams.h"
-
-/**************************************************************************/
-/*!
-    \brief
-    Instantiates a new GapAdvertisingParams instance
-
-    \param[in]  advType
-                The GAP advertising mode to use for this device. Valid
-                values are defined in AdvertisingType:
-
-                \par ADV_NON_CONNECTABLE_UNDIRECTED
-                All connections to the peripheral device will be refused.
-
-                \par ADV_CONNECTABLE_DIRECTED
-                Only connections from a pre-defined central device will be
-                accepted.
-
-                \par ADV_CONNECTABLE_UNDIRECTED
-                Any central device can connect to this peripheral.
-
-                \par ADV_SCANNABLE_UNDIRECTED
-                Any central device can connect to this peripheral, and
-                the secondary Scan Response payload will be included or
-                available to central devices.
-
-                \par
-                See Bluetooth Core Specification 4.0 (Vol. 3), Part C,
-                Section 9.3 and Core Specification 4.0 (Vol. 6), Part B,
-                Section 2.3.1 for further information on GAP connection
-                modes
-
-    \param[in]  interval
-                Advertising interval between 0x0020 and 0x4000 in 0.625ms units
-                (20ms to 10.24s).  If using non-connectable mode
-                (ADV_NON_CONNECTABLE_UNDIRECTED) this min value is 0x00A0
-                (100ms). To reduce the likelihood of collisions, the link layer
-                perturbs this interval by a pseudo-random delay with a range of
-                0 ms to 10 ms for each advertising event.
-
-                \par
-                Decreasing this value will allow central devices to detect
-                your peripheral faster at the expense of more power being
-                used by the radio due to the higher data transmit rate.
-
-                \par
-                This field must be set to 0 if connectionMode is equal
-                to ADV_CONNECTABLE_DIRECTED
-
-                \par
-                See Bluetooth Core Specification, Vol 3., Part C,
-                Appendix A for suggested advertising intervals.
-
-    \param[in]  timeout
-                Advertising timeout between 0x1 and 0x3FFF (1 and 16383)
-                in seconds.  Enter 0 to disable the advertising timeout.
-
-    \par EXAMPLE
-
-    \code
-
-    \endcode
-*/
-/**************************************************************************/
-GapAdvertisingParams::GapAdvertisingParams(AdvertisingType advType, uint16_t interval, uint16_t timeout)
-{
-    _advType  = advType;
-    _interval = interval;
-    _timeout  = timeout;
-
-    /* Interval checks */
-    if (_advType == ADV_CONNECTABLE_DIRECTED) {
-        /* Interval must be 0 in directed connectable mode */
-        _interval = 0;
-    } else if (_advType == ADV_NON_CONNECTABLE_UNDIRECTED) {
-        /* Min interval is slightly larger than in other modes */
-        if (_interval < GAP_ADV_PARAMS_INTERVAL_MIN_NONCON) {
-            _interval = GAP_ADV_PARAMS_INTERVAL_MIN_NONCON;
-        }
-        if (_interval > GAP_ADV_PARAMS_INTERVAL_MAX) {
-            _interval = GAP_ADV_PARAMS_INTERVAL_MAX;
-        }
-    } else {
-        /* Stay within interval limits */
-        if (_interval < GAP_ADV_PARAMS_INTERVAL_MIN) {
-            _interval = GAP_ADV_PARAMS_INTERVAL_MIN;
-        }
-        if (_interval > GAP_ADV_PARAMS_INTERVAL_MAX) {
-            _interval = GAP_ADV_PARAMS_INTERVAL_MAX;
-        }
-    }
-
-    /* Timeout checks */
-    if (timeout) {
-        /* Stay within timeout limits */
-        if (_timeout > GAP_ADV_PARAMS_TIMEOUT_MAX) {
-            _timeout = GAP_ADV_PARAMS_TIMEOUT_MAX;
-        }
-    }
-}
-
-/**************************************************************************/
-/*!
-    Destructor
-*/
-/**************************************************************************/
-GapAdvertisingParams::~GapAdvertisingParams(void)
-{
-}