Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma.h
- Revision:
- 85:024bf7f99721
- Child:
- 92:4fc01daae5a5
diff -r 0b3ab51c8877 -r 024bf7f99721 TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma.h Wed Jun 11 15:14:05 2014 +0100
@@ -0,0 +1,426 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 28-May-2014
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_H
+#define __STM32F0xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+} DMA_InitTypeDef;
+
+/**
+ * @brief DMA Configuration enumeration values definition
+ */
+typedef enum
+{
+ DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */
+ DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */
+
+} DMA_ControlTypeDef;
+
+/**
+ * @brief HAL DMA2D State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA process success and ready for use */
+ HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+
+}HAL_DMA_LevelCompleteTypeDef;
+
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+} DMA_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions
+ * @{
+ */
+
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extension module */
+#include "stm32f0xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/