Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h
- Committer:
- filartrix
- Date:
- 2015-04-08
- Revision:
- 97:4298809c7c9e
- Parent:
- 93:e188a91d3eaa
File content as of revision 97:4298809c7c9e:
/**
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
* @version V1.2.0
* @date 11-December-2014
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_UART_EX_H
#define __STM32F0xx_HAL_UART_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup UARTEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
* @{
*/
/**
* @brief UART wake up from stop mode parameters
*/
typedef struct
{
uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
be filled up. */
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
This parameter can be a value of @ref UART_WakeUp_Address_Length */
uint8_t Address; /*!< UART/USART node address (7-bit long max) */
} UART_WakeUpTypeDef;
/**
* @}
*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
*/
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
#else
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
* @{
*/
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
#else
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
#define UART_LIN_DISABLE ((uint32_t)0x00000000)
#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
((LIN) == UART_LIN_ENABLE))
/**
* @}
*/
/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection
* @{
*/
#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
/**
* @}
*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/** @defgroup UART_Flags UARTEx Status Flags
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the ISR register
* @{
*/
#define UART_FLAG_REACK ((uint32_t)0x00400000)
#define UART_FLAG_TEACK ((uint32_t)0x00200000)
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_WUF ((uint32_t)0x00100000)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_RWU ((uint32_t)0x00080000)
#define UART_FLAG_SBKF ((uint32_t)0x00040000
#define UART_FLAG_CMF ((uint32_t)0x00020000)
#define UART_FLAG_BUSY ((uint32_t)0x00010000)
#define UART_FLAG_ABRF ((uint32_t)0x00008000)
#define UART_FLAG_ABRE ((uint32_t)0x00004000)
#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define UART_FLAG_EOBF ((uint32_t)0x00001000)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
#define UART_FLAG_RTOF ((uint32_t)0x00000800)
#define UART_FLAG_CTS ((uint32_t)0x00000400)
#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_LBDF ((uint32_t)0x00000100)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_TXE ((uint32_t)0x00000080)
#define UART_FLAG_TC ((uint32_t)0x00000040)
#define UART_FLAG_RXNE ((uint32_t)0x00000020)
#define UART_FLAG_IDLE ((uint32_t)0x00000010)
#define UART_FLAG_ORE ((uint32_t)0x00000008)
#define UART_FLAG_NE ((uint32_t)0x00000004)
#define UART_FLAG_FE ((uint32_t)0x00000002)
#define UART_FLAG_PE ((uint32_t)0x00000001)
/**
* @}
*/
/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
* Elements values convention: 0000ZZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
* - ZZZZZ : Flag position in the ISR register(5bits)
* @{
*/
#define UART_IT_PE ((uint16_t)0x0028)
#define UART_IT_TXE ((uint16_t)0x0727)
#define UART_IT_TC ((uint16_t)0x0626)
#define UART_IT_RXNE ((uint16_t)0x0525)
#define UART_IT_IDLE ((uint16_t)0x0424)
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_LBD ((uint16_t)0x0846)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_IT_CTS ((uint16_t)0x096A)
#define UART_IT_CM ((uint16_t)0x112E)
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_WUF ((uint16_t)0x1476)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags
* @{
*/
#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
/** @defgroup UART_Request_Parameters UARTEx Request Parameters
* @{
*/
#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
((PARAM) == UART_SENDBREAK_REQUEST) || \
((PARAM) == UART_MUTE_MODE_REQUEST) || \
((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
((PARAM) == UART_TXDATA_FLUSH_REQUEST))
#else
#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
((PARAM) == UART_SENDBREAK_REQUEST) || \
((PARAM) == UART_MUTE_MODE_REQUEST) || \
((PARAM) == UART_RXDATA_FLUSH_REQUEST))
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
/**
* @}
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
/**
* @}
*/
/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
* @{
*/
#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
/**
* @}
*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
* @{
*/
/** @brief Reports the UART clock source.
* @param __HANDLE__: specifies the UART Handle
* @param __CLOCKSOURCE__ : output variable
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} while(0)
#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
#elif defined(STM32F070xB)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
#elif defined(STM32F091xC) || defined (STM32F098xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
switch(__HAL_RCC_GET_USART3_SOURCE()) \
{ \
case RCC_USART3CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART3CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART3CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART3CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART5) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART6) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART7) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART8) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
#elif defined(STM32F030xC)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_SYSCLK: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART4) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART5) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else if((__HANDLE__)->Instance == USART6) \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
/** @brief Computes the UART mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
* If PCE = 1, the parity bit is not included in the data extracted
* by the reception API().
* This masking operation is not carried out in the case of
* DMA transfers.
* @param __HANDLE__: specifies the UART Handle
* @retval none
*/
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x01FF ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x00FF ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x00FF ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x007F ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x007F ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x003F ; \
} \
} \
} while(0)
#else
#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x01FF ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x00FF ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x00FF ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x007F ; \
} \
} \
} while(0)
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UARTEx_Exported_Functions
* @{
*/
/** @addtogroup UARTEx_Exported_Functions_Group1
* @brief Extended Initialization and Configuration Functions
* @{
*/
/* Initialization and de-initialization functions ****************************/
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
* @brief Extended UART Interrupt handling function
* @{
*/
/* IO operation functions ***************************************************/
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group3
* @brief Extended Peripheral Control functions
* @{
*/
/* Peripheral Control functions **********************************************/
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/* Peripheral State functions ************************************************/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_UART_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/