Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h
- Revision:
- 93:e188a91d3eaa
- Parent:
- 92:4fc01daae5a5
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
@@ -55,6 +55,31 @@
*/
/* Exported types ------------------------------------------------------------*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
@@ -63,9 +88,9 @@
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +102,9 @@
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -87,9 +112,9 @@
/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
@@ -103,15 +128,15 @@
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
@@ -133,7 +158,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/** @defgroup UART_Flags UARTEx Status Flags
* Elements values convention: 0xXXXX
@@ -142,24 +167,24 @@
*/
#define UART_FLAG_REACK ((uint32_t)0x00400000)
#define UART_FLAG_TEACK ((uint32_t)0x00200000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_WUF ((uint32_t)0x00100000)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_RWU ((uint32_t)0x00080000)
#define UART_FLAG_SBKF ((uint32_t)0x00040000
#define UART_FLAG_CMF ((uint32_t)0x00020000)
#define UART_FLAG_BUSY ((uint32_t)0x00010000)
#define UART_FLAG_ABRF ((uint32_t)0x00008000)
#define UART_FLAG_ABRE ((uint32_t)0x00004000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define UART_FLAG_EOBF ((uint32_t)0x00001000)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
#define UART_FLAG_RTOF ((uint32_t)0x00000800)
#define UART_FLAG_CTS ((uint32_t)0x00000400)
#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_LBDF ((uint32_t)0x00000100)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_TXE ((uint32_t)0x00000080)
#define UART_FLAG_TC ((uint32_t)0x00000040)
#define UART_FLAG_RXNE ((uint32_t)0x00000020)
@@ -173,13 +198,13 @@
*/
/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * Elements values convention: 0000ZZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
+ * - ZZZZZ : Flag position in the ISR register(5bits)
* @{
*/
#define UART_IT_PE ((uint16_t)0x0028)
@@ -187,14 +212,14 @@
#define UART_IT_TC ((uint16_t)0x0626)
#define UART_IT_RXNE ((uint16_t)0x0525)
#define UART_IT_IDLE ((uint16_t)0x0424)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_LBD ((uint16_t)0x0846)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_IT_CTS ((uint16_t)0x096A)
-#define UART_IT_CM ((uint16_t)0x142E)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_IT_CM ((uint16_t)0x112E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_WUF ((uint16_t)0x1476)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -209,16 +234,16 @@
#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -247,7 +272,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
@@ -271,7 +296,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
@@ -312,7 +337,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -347,6 +372,47 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F070xB)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -496,6 +562,55 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F030xC)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -509,9 +624,9 @@
* @param __HANDLE__: specifies the UART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
@@ -574,9 +689,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -591,23 +706,25 @@
* @{
*/
/* Initialization and de-initialization functions ****************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
-HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
-HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
- * @brief Extended I/O operation functions
+ * @brief Extended UART Interrupt handling function
* @{
*/
-/* I/O operation functions ***************************************************/
+/* IO operation functions ***************************************************/
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
@@ -618,9 +735,13 @@
*/
/* Peripheral Control functions **********************************************/
-void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/