Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart.h
- Revision:
- 93:e188a91d3eaa
- Parent:
- 92:4fc01daae5a5
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
@@ -142,22 +142,6 @@
} UART_AdvFeatureInitTypeDef;
/**
- * @brief UART wake up from stop mode parameters
- */
-typedef struct
-{
- uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
- This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
- If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
- be filled up. */
-
- uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UART_WakeUp_Address_Length */
-
- uint8_t Address; /*!< UART/USART node address (7-bit long max) */
-} UART_WakeUpTypeDef;
-
-/**
* @brief HAL UART State structures definition
*/
typedef enum
@@ -172,19 +156,6 @@
HAL_UART_STATE_ERROR = 0x04 /*!< Error */
}HAL_UART_StateTypeDef;
-/**
- * @brief HAL UART Error Code structure definition
- */
-typedef enum
-{
- HAL_UART_ERROR_NONE = 0x00, /*!< No error */
- HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_UART_ERROR_FE = 0x04, /*!< frame error */
- HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_UART_ErrorTypeDef;
-
/**
* @brief UART clock sources definition
*/
@@ -202,35 +173,36 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* UART registers base address */
+ USART_TypeDef *Instance; /*!< UART registers base address */
- UART_InitTypeDef Init; /* UART communication parameters */
+ UART_InitTypeDef Init; /*!< UART communication parameters */
- UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
- uint16_t TxXferSize; /* UART Tx Transfer size */
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
- uint16_t TxXferCount; /* UART Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
- uint16_t RxXferSize; /* UART Rx Transfer size */
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
- uint16_t RxXferCount; /* UART Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
- uint16_t Mask; /* UART Rx RDR register mask */
+ uint16_t Mask; /*!< UART Rx RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_UART_StateTypeDef State; /* UART communication state */
+ HAL_UART_StateTypeDef State; /*!< UART communication state */
- HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+ __IO uint32_t ErrorCode; /*!< UART Error code
+ This parameter can be a value of @ref UART_Error */
}UART_HandleTypeDef;
@@ -243,13 +215,28 @@
* @{
*/
+/** @defgroup UART_Error UART Error
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 ((uint32_t)0x0000)
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
- ((STOPBITS) == UART_STOPBITS_2))
+ ((STOPBITS) == UART_STOPBITS_2) || \
+ ((STOPBITS) == UART_STOPBITS_1_5))
/**
* @}
*/