frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
Diff: TARGET_K64F/system_MK64F12.h
- Revision:
- 90:cb3d968589d8
- Parent:
- 82:6473597d706e
diff -r 552587b429a1 -r cb3d968589d8 TARGET_K64F/system_MK64F12.h --- a/TARGET_K64F/system_MK64F12.h Fri Sep 12 16:41:52 2014 +0100 +++ b/TARGET_K64F/system_MK64F12.h Tue Oct 28 16:40:41 2014 +0000 @@ -1,21 +1,48 @@ /* ** ################################################################### ** Processor: MK64FN1M0VMD12 -** Compilers: ARM Compiler +** Compilers: Keil ARM C/C++ Compiler ** Freescale C/C++ for Embedded ARM ** GNU C Compiler ** GNU C Compiler - CodeSourcery Sourcery G++ ** IAR ANSI C/C++ Compiler for ARM ** -** Reference manual: K64P144M120SF5RM, Rev.1, July 2013 -** Version: rev. 2.1, 2013-10-29 +** Reference manual: K64P144M120SF5RM, Rev.2, January 2014 +** Version: rev. 2.5, 2014-02-10 +** Build: b140611 ** ** Abstract: ** Provides a system configuration function and a global variable that ** contains the system frequency. It configures the device and initializes ** the oscillator (PLL) that is part of the microcontroller device. ** -** Copyright: 2013 Freescale, Inc. All Rights Reserved. +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** ** http: www.freescale.com ** mail: support@freescale.com @@ -30,16 +57,29 @@ ** System initialization updated. ** MCG - registers updated. ** PORTA, PORTB, PORTC, PORTE - registers for digital filter removed. -** - rev. 2.1 (2013-10-29) +** - rev. 2.1 (2013-10-30) ** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-09) +** DMA - EARS register removed. +** AIPS0, AIPS1 - MPRA register updated. +** - rev. 2.3 (2014-01-24) +** Update according to reference manual rev. 2 +** ENET, MCG, MCM, SIM, USB - registers updated +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK64F12.h +** Update of SystemInit() and SystemCoreClockUpdate() functions. +** - rev. 2.5 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK64F12.h +** Update of SystemInit() and SystemCoreClockUpdate() functions. +** Module access macro module_BASES replaced by module_BASE_PTRS. ** ** ################################################################### */ /*! * @file MK64F12 - * @version 2.1 - * @date 2013-10-29 + * @version 2.5 + * @date 2014-02-10 * @brief Device specific configuration file for MK64F12 (header file) * * Provides a system configuration function and a global variable that contains @@ -56,6 +96,213 @@ #include <stdint.h> + +#define DISABLE_WDOG 1 + +#ifndef CLOCK_SETUP + #define CLOCK_SETUP 4 +#endif + +/* MCG mode constants */ + +#define MCG_MODE_FEI 0U +#define MCG_MODE_FBI 1U +#define MCG_MODE_BLPI 2U +#define MCG_MODE_FEE 3U +#define MCG_MODE_FBE 4U +#define MCG_MODE_BLPE 5U +#define MCG_MODE_PBE 6U +#define MCG_MODE_PEE 7U + +/* Predefined clock setups + 0 ... Default part configuration + Multipurpose Clock Generator (MCG) in FEI mode. + Reference clock source for MCG module: Slow internal reference clock + Core clock = 20.97152MHz + Bus clock = 20.97152MHz + 1 ... Maximum achievable clock frequency configuration + Multipurpose Clock Generator (MCG) in PEE mode. + Reference clock source for MCG module: System oscillator 0 reference clock + Core clock = 120MHz + Bus clock = 60MHz + 2 ... Chip internaly clocked, ready for Very Low Power Run mode. + Multipurpose Clock Generator (MCG) in BLPI mode. + Reference clock source for MCG module: Fast internal reference clock + Core clock = 4MHz + Bus clock = 4MHz + 3 ... Chip externally clocked, ready for Very Low Power Run mode. + Multipurpose Clock Generator (MCG) in BLPE mode. + Reference clock source for MCG module: RTC oscillator reference clock + Core clock = 0.032768MHz + Bus clock = 0.032768MHz + 4 ... USB clock setup + Multipurpose Clock Generator (MCG) in PEE mode. + Reference clock source for MCG module: System oscillator 0 reference clock + Core clock = 120MHz + Bus clock = 60MHz + */ + +/* Define clock source values */ + +#define CPU_XTAL_CLK_HZ 50000000u /* Value of the external crystal or oscillator clock frequency in Hz */ +#define CPU_XTAL32k_CLK_HZ 32768u /* Value of the external 32k crystal or oscillator clock frequency in Hz */ +#define CPU_INT_SLOW_CLK_HZ 32768u /* Value of the slow internal oscillator clock frequency in Hz */ +#define CPU_INT_FAST_CLK_HZ 4000000u /* Value of the fast internal oscillator clock frequency in Hz */ +#define CPU_INT_IRC_CLK_HZ 48000000u /* Value of the 48M internal oscillator clock frequency in Hz */ + +/* RTC oscillator setting */ +/* RTC_CR: SC2P=0,SC4P=0,SC8P=0,SC16P=0,CLKO=1,OSCE=1,WPS=0,UM=0,SUP=0,WPE=0,SWR=0 */ +#define SYSTEM_RTC_CR_VALUE 0x0300U /* RTC_CR */ + +/* Low power mode enable */ +/* SMC_PMPROT: AVLP=1,ALLS=1,AVLLS=1 */ +#define SYSTEM_SMC_PMPROT_VALUE 0x2AU /* SMC_PMPROT */ + +/* Internal reference clock trim */ +/* #undef SLOW_TRIM_ADDRESS */ /* Slow oscillator not trimmed. Commented out for MISRA compliance. */ +/* #undef SLOW_FINE_TRIM_ADDRESS */ /* Slow oscillator not trimmed. Commented out for MISRA compliance. */ +/* #undef FAST_TRIM_ADDRESS */ /* Fast oscillator not trimmed. Commented out for MISRA compliance. */ +/* #undef FAST_FINE_TRIM_ADDRESS */ /* Fast oscillator not trimmed. Commented out for MISRA compliance. */ + +#if (CLOCK_SETUP == 0) + #define DEFAULT_SYSTEM_CLOCK 20971520u /* Default System clock value */ + #define MCG_MODE MCG_MODE_FEI /* Clock generator mode */ + /* MCG_C1: CLKS=0,FRDIV=0,IREFS=1,IRCLKEN=1,IREFSTEN=0 */ + #define SYSTEM_MCG_C1_VALUE 0x06U /* MCG_C1 */ + /* MCG_C2: LOCRE0=0,FCFTRIM=0,RANGE=2,HGO=0,EREFS=0,LP=0,IRCS=0 */ + #define SYSTEM_MCG_C2_VALUE 0x20U /* MCG_C2 */ + /* MCG_C4: DMX32=0,DRST_DRS=0,FCTRIM=0,SCFTRIM=0 */ + #define SYSTEM_MCG_C4_VALUE 0x00U /* MCG_C4 */ + /* MCG_SC: ATME=0,ATMS=0,ATMF=0,FLTPRSRV=0,FCRDIV=0,LOCS0=0 */ + #define SYSTEM_MCG_SC_VALUE 0x00U /* MCG_SC */ +/* MCG_C5: PLLCLKEN0=0,PLLSTEN0=0,PRDIV0=0 */ + #define SYSTEM_MCG_C5_VALUE 0x00U /* MCG_C5 */ +/* MCG_C6: LOLIE0=0,PLLS=0,CME0=0,VDIV0=0 */ + #define SYSTEM_MCG_C6_VALUE 0x00U /* MCG_C6 */ +/* MCG_C7: OSCSEL=0 */ + #define SYSTEM_MCG_C7_VALUE 0x00U /* MCG_C7 */ +/* OSC_CR: ERCLKEN=0,EREFSTEN=0,SC2P=0,SC4P=0,SC8P=0,SC16P=0 */ + #define SYSTEM_OSC_CR_VALUE 0x00U /* OSC_CR */ +/* SMC_PMCTRL: LPWUI=0,RUNM=0,STOPA=0,STOPM=0 */ + #define SYSTEM_SMC_PMCTRL_VALUE 0x00U /* SMC_PMCTRL */ +/* SIM_CLKDIV1: OUTDIV1=0,OUTDIV2=0,OUTDIV3=1,OUTDIV4=1 */ + #define SYSTEM_SIM_CLKDIV1_VALUE 0x00110000U /* SIM_CLKDIV1 */ +/* SIM_SOPT1: USBREGEN=0,USBSSTBY=0,USBVSTBY=0,OSC32KSEL=2,RAMSIZE=0 */ + #define SYSTEM_SIM_SOPT1_VALUE 0x00080000U /* SIM_SOPT1 */ +/* SIM_SOPT2: SDHCSRC=0,TIMESRC=0,RMIISRC=0,USBSRC=0,PLLFLLSEL=0,TRACECLKSEL=0,PTD7PAD=0,FBSL=0,CLKOUTSEL=0,RTCCLKOUTSEL=0 */ + #define SYSTEM_SIM_SOPT2_VALUE 0x00U /* SIM_SOPT2 */ +#elif (CLOCK_SETUP == 1) + #define DEFAULT_SYSTEM_CLOCK 120000000u /* Default System clock value */ + #define MCG_MODE MCG_MODE_PEE /* Clock generator mode */ + /* MCG_C1: CLKS=0,FRDIV=7,IREFS=0,IRCLKEN=1,IREFSTEN=0 */ + #define SYSTEM_MCG_C1_VALUE 0x3AU /* MCG_C1 */ + /* MCG_C2: LOCRE0=0,FCFTRIM=0,RANGE=2,HGO=0,EREFS=0,LP=0,IRCS=0 */ + #define SYSTEM_MCG_C2_VALUE 0x20U /* MCG_C2 */ + /* MCG_C4: DMX32=0,DRST_DRS=0,FCTRIM=0,SCFTRIM=0 */ + #define SYSTEM_MCG_C4_VALUE 0x00U /* MCG_C4 */ + /* MCG_SC: ATME=0,ATMS=0,ATMF=0,FLTPRSRV=0,FCRDIV=0,LOCS0=0 */ + #define SYSTEM_MCG_SC_VALUE 0x00U /* MCG_SC */ +/* MCG_C5: PLLCLKEN0=0,PLLSTEN0=0,PRDIV0=0x13 */ + #define SYSTEM_MCG_C5_VALUE 0x13U /* MCG_C5 */ +/* MCG_C6: LOLIE0=0,PLLS=1,CME0=0,VDIV0=0x18 */ + #define SYSTEM_MCG_C6_VALUE 0x58U /* MCG_C6 */ +/* MCG_C7: OSCSEL=0 */ + #define SYSTEM_MCG_C7_VALUE 0x00U /* MCG_C7 */ +/* OSC_CR: ERCLKEN=1,EREFSTEN=0,SC2P=0,SC4P=0,SC8P=0,SC16P=0 */ + #define SYSTEM_OSC_CR_VALUE 0x80U /* OSC_CR */ +/* SMC_PMCTRL: LPWUI=0,RUNM=0,STOPA=0,STOPM=0 */ + #define SYSTEM_SMC_PMCTRL_VALUE 0x00U /* SMC_PMCTRL */ +/* SIM_CLKDIV1: OUTDIV1=0,OUTDIV2=1,OUTDIV3=1,OUTDIV4=4 */ + #define SYSTEM_SIM_CLKDIV1_VALUE 0x01140000U /* SIM_CLKDIV1 */ +/* SIM_SOPT1: USBREGEN=0,USBSSTBY=0,USBVSTBY=0,OSC32KSEL=2,RAMSIZE=0 */ + #define SYSTEM_SIM_SOPT1_VALUE 0x00080000U /* SIM_SOPT1 */ +/* SIM_SOPT2: SDHCSRC=0,TIMESRC=0,RMIISRC=0,USBSRC=0,PLLFLLSEL=1,TRACECLKSEL=0,PTD7PAD=0,FBSL=0,CLKOUTSEL=0,RTCCLKOUTSEL=0 */ + #define SYSTEM_SIM_SOPT2_VALUE 0x00010000U /* SIM_SOPT2 */ +#elif (CLOCK_SETUP == 2) + #define DEFAULT_SYSTEM_CLOCK 4000000u /* Default System clock value */ + #define MCG_MODE MCG_MODE_BLPI /* Clock generator mode */ + /* MCG_C1: CLKS=1,FRDIV=0,IREFS=1,IRCLKEN=1,IREFSTEN=0 */ + #define SYSTEM_MCG_C1_VALUE 0x46U /* MCG_C1 */ + /* MCG_C2: LOCRE0=0,FCFTRIM=0,RANGE=2,HGO=0,EREFS=0,LP=1,IRCS=1 */ + #define SYSTEM_MCG_C2_VALUE 0x23U /* MCG_C2 */ + /* MCG_C4: DMX32=0,DRST_DRS=0,FCTRIM=0,SCFTRIM=0 */ + #define SYSTEM_MCG_C4_VALUE 0x00U /* MCG_C4 */ + /* MCG_SC: ATME=0,ATMS=0,ATMF=0,FLTPRSRV=0,FCRDIV=0,LOCS0=0 */ + #define SYSTEM_MCG_SC_VALUE 0x00U /* MCG_SC */ +/* MCG_C5: PLLCLKEN0=0,PLLSTEN0=0,PRDIV0=0 */ + #define SYSTEM_MCG_C5_VALUE 0x00U /* MCG_C5 */ +/* MCG_C6: LOLIE0=0,PLLS=0,CME0=0,VDIV0=0 */ + #define SYSTEM_MCG_C6_VALUE 0x00U /* MCG_C6 */ +/* MCG_C7: OSCSEL=0 */ + #define SYSTEM_MCG_C7_VALUE 0x00U /* MCG_C7 */ +/* OSC_CR: ERCLKEN=1,EREFSTEN=0,SC2P=0,SC4P=0,SC8P=0,SC16P=0 */ + #define SYSTEM_OSC_CR_VALUE 0x80U /* OSC_CR */ +/* SMC_PMCTRL: LPWUI=0,RUNM=0,STOPA=0,STOPM=0 */ + #define SYSTEM_SMC_PMCTRL_VALUE 0x00U /* SMC_PMCTRL */ +/* SIM_CLKDIV1: OUTDIV1=0,OUTDIV2=0,OUTDIV3=0,OUTDIV4=4 */ + #define SYSTEM_SIM_CLKDIV1_VALUE 0x00040000U /* SIM_CLKDIV1 */ +/* SIM_SOPT1: USBREGEN=0,USBSSTBY=0,USBVSTBY=0,OSC32KSEL=2,RAMSIZE=0 */ + #define SYSTEM_SIM_SOPT1_VALUE 0x00080000U /* SIM_SOPT1 */ +/* SIM_SOPT2: SDHCSRC=0,TIMESRC=0,RMIISRC=0,USBSRC=0,PLLFLLSEL=3,TRACECLKSEL=0,PTD7PAD=0,FBSL=0,CLKOUTSEL=0,RTCCLKOUTSEL=0 */ + #define SYSTEM_SIM_SOPT2_VALUE 0x00030000U /* SIM_SOPT2 */ +#elif (CLOCK_SETUP == 3) + #define DEFAULT_SYSTEM_CLOCK 32768u /* Default System clock value */ + #define MCG_MODE MCG_MODE_BLPE /* Clock generator mode */ + /* MCG_C1: CLKS=2,FRDIV=0,IREFS=0,IRCLKEN=1,IREFSTEN=0 */ + #define SYSTEM_MCG_C1_VALUE 0x82U /* MCG_C1 */ + /* MCG_C2: LOCRE0=0,FCFTRIM=0,RANGE=2,HGO=0,EREFS=0,LP=1,IRCS=1 */ + #define SYSTEM_MCG_C2_VALUE 0x23U /* MCG_C2 */ + /* MCG_C4: DMX32=0,DRST_DRS=0,FCTRIM=0,SCFTRIM=0 */ + #define SYSTEM_MCG_C4_VALUE 0x00U /* MCG_C4 */ + /* MCG_SC: ATME=0,ATMS=0,ATMF=0,FLTPRSRV=0,FCRDIV=1,LOCS0=0 */ + #define SYSTEM_MCG_SC_VALUE 0x02U /* MCG_SC */ +/* MCG_C5: PLLCLKEN0=0,PLLSTEN0=0,PRDIV0=0 */ + #define SYSTEM_MCG_C5_VALUE 0x00U /* MCG_C5 */ +/* MCG_C6: LOLIE0=0,PLLS=0,CME0=0,VDIV0=0 */ + #define SYSTEM_MCG_C6_VALUE 0x00U /* MCG_C6 */ +/* MCG_C7: OSCSEL=1 */ + #define SYSTEM_MCG_C7_VALUE 0x01U /* MCG_C7 */ +/* OSC_CR: ERCLKEN=0,EREFSTEN=0,SC2P=0,SC4P=0,SC8P=0,SC16P=0 */ + #define SYSTEM_OSC_CR_VALUE 0x00U /* OSC_CR */ +/* SMC_PMCTRL: LPWUI=0,RUNM=0,STOPA=0,STOPM=0 */ + #define SYSTEM_SMC_PMCTRL_VALUE 0x00U /* SMC_PMCTRL */ +/* SIM_CLKDIV1: OUTDIV1=0,OUTDIV2=0,OUTDIV3=0,OUTDIV4=0 */ + #define SYSTEM_SIM_CLKDIV1_VALUE 0x00U /* SIM_CLKDIV1 */ +/* SIM_SOPT1: USBREGEN=0,USBSSTBY=0,USBVSTBY=0,OSC32KSEL=2,RAMSIZE=0 */ + #define SYSTEM_SIM_SOPT1_VALUE 0x00080000U /* SIM_SOPT1 */ +/* SIM_SOPT2: SDHCSRC=0,TIMESRC=0,RMIISRC=0,USBSRC=0,PLLFLLSEL=3,TRACECLKSEL=0,PTD7PAD=0,FBSL=0,CLKOUTSEL=0,RTCCLKOUTSEL=0 */ + #define SYSTEM_SIM_SOPT2_VALUE 0x00030000U /* SIM_SOPT2 */ +#elif (CLOCK_SETUP == 4) + #define DEFAULT_SYSTEM_CLOCK 120000000u /* Default System clock value */ + #define MCG_MODE MCG_MODE_PEE /* Clock generator mode */ + /* MCG_C1: CLKS=0,FRDIV=7,IREFS=0,IRCLKEN=1,IREFSTEN=0 */ + #define SYSTEM_MCG_C1_VALUE 0x3AU /* MCG_C1 */ + /* MCG_C2: LOCRE0=0,FCFTRIM=0,RANGE=2,HGO=0,EREFS=0,LP=0,IRCS=0 */ + #define SYSTEM_MCG_C2_VALUE 0x20U /* MCG_C2 */ + /* MCG_C4: DMX32=0,DRST_DRS=0,FCTRIM=0,SCFTRIM=0 */ + #define SYSTEM_MCG_C4_VALUE 0x00U /* MCG_C4 */ + /* MCG_SC: ATME=0,ATMS=0,ATMF=0,FLTPRSRV=0,FCRDIV=0,LOCS0=0 */ + #define SYSTEM_MCG_SC_VALUE 0x00U /* MCG_SC */ +/* MCG_C5: PLLCLKEN0=0,PLLSTEN0=0,PRDIV0=0x13 */ + #define SYSTEM_MCG_C5_VALUE 0x13U /* MCG_C5 */ +/* MCG_C6: LOLIE0=0,PLLS=1,CME0=0,VDIV0=0x18 */ + #define SYSTEM_MCG_C6_VALUE 0x58U /* MCG_C6 */ +/* MCG_C7: OSCSEL=0 */ + #define SYSTEM_MCG_C7_VALUE 0x00U /* MCG_C7 */ +/* OSC_CR: ERCLKEN=1,EREFSTEN=0,SC2P=0,SC4P=0,SC8P=0,SC16P=0 */ + #define SYSTEM_OSC_CR_VALUE 0x80U /* OSC_CR */ +/* SMC_PMCTRL: LPWUI=0,RUNM=0,STOPA=0,STOPM=0 */ + #define SYSTEM_SMC_PMCTRL_VALUE 0x00U /* SMC_PMCTRL */ +/* SIM_CLKDIV1: OUTDIV1=0,OUTDIV2=1,OUTDIV3=1,OUTDIV4=4 */ + #define SYSTEM_SIM_CLKDIV1_VALUE 0x01140000U /* SIM_CLKDIV1 */ +/* SIM_CLKDIV2: USBDIV=4,USBFRAC=1 */ + #define SYSTEM_SIM_CLKDIV2_VALUE 0x09U /* SIM_CLKDIV2 */ +/* SIM_SOPT1: USBREGEN=0,USBSSTBY=0,USBVSTBY=0,OSC32KSEL=2,RAMSIZE=0 */ + #define SYSTEM_SIM_SOPT1_VALUE 0x00080000U /* SIM_SOPT1 */ +/* SIM_SOPT2: SDHCSRC=0,TIMESRC=0,RMIISRC=0,USBSRC=0,PLLFLLSEL=1,TRACECLKSEL=0,PTD7PAD=0,FBSL=0,CLKOUTSEL=0,RTCCLKOUTSEL=0 */ + #define SYSTEM_SIM_SOPT2_VALUE 0x00010000U /* SIM_SOPT2 */ +#endif + /** * @brief System clock frequency (core clock) *