Diff: Components/VL6180X/vl6180x_platform.h

Revision:

1:1de1ea2994d9

Child:

8:f943a1fca15f

diff -r 1fb1f010ac84 -r 1de1ea2994d9 Components/VL6180X/vl6180x_platform.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL6180X/vl6180x_platform.h	Wed Sep 09 16:00:39 2015 +0000
@@ -0,0 +1,115 @@
+/*******************************************************************************
+Copyright © 2014, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of STMicroelectronics nor the
+      names of its contributors may be used to endorse or promote products
+      derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED. 
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+
+
+
+/* vl6180x_platform.h STM32 Nucelo F401 single device  using generic cci-i2c
+ * trace via swo port some GnuArm eclipse toolset */
+
+#ifndef VL6180x_PLATFORM
+#define VL6180x_PLATFORM
+
+
+#include "vl6180x_appcfg.h"
+#include "vl6180x_def.h"
+
+
+
+#define VL6180x_DEV_DATA_ATTR
+
+#define ROMABLE_DATA
+/*  #define ROMABLE_DATA  __attribute__ ((section ("user_rom"))) */
+
+
+
+#if VL6180X_LOG_ENABLE
+/*  dot not include non ansi here trace was a case :( */
+#ifdef TRACE
+#include "diag/trace.h"
+extern volatile uint32_t g_TickCnt;
+#define LOG_GET_TIME()  g_TickCnt
+#else
+/* these is nto stm32 vl6180x GNuArm eclpse build*/
+#define trace_printf(...) (void)0
+#define LOG_GET_TIME() (int)0 /* add your code here expect to be an integer native (%d) type  value  */
+#endif
+
+
+
+#define LOG_FUNCTION_START(fmt, ... ) \
+    trace_printf("beg %s start @%d\t" fmt "\n", __func__, LOG_GET_TIME(), ##__VA_ARGS__)
+
+#define LOG_FUNCTION_END(status)\
+        trace_printf("end %s @%d %d\n", __func__, LOG_GET_TIME(), (int)status)
+
+#define LOG_FUNCTION_END_FMT(status, fmt, ... )\
+        trace_printf("End %s @%d %d\t"fmt"\n" , __func__, LOG_GET_TIME(), (int)status, ##__VA_ARGS__)
+
+#define VL6180x_ErrLog(msg, ... )\
+    do{\
+        trace_printf("ERR in %s line %d\n" msg, __func__, __LINE__, ##__VA_ARGS__);\
+    }while(0)
+
+#else /* VL6180X_LOG_ENABLE no logging */
+    void OnErrLog(void);
+    #define LOG_FUNCTION_START(...) (void)0
+    #define LOG_FUNCTION_END(...) (void)0
+    #define LOG_FUNCTION_END_FMT(...) (void)0
+    #define VL6180x_ErrLog(... ) OnErrLog()
+#endif
+
+
+#if  VL6180x_SINGLE_DEVICE_DRIVER
+    typedef uint8_t VL6180xDev_t;
+
+#else /* VL6180x_SINGLE_DEVICE_DRIVER */
+
+    struct MyVL6180Dev_t {
+        struct VL6180xDevData_t Data;
+    #if I2C_BUFFER_CONFIG == 2
+        uint8_t i2c_buffer[VL6180x_MAX_I2C_XFER_SIZE];
+        #define VL6180x_GetI2cBuffer(dev, n) ((dev)->i2c_buffer)
+    #endif
+    };
+    typedef struct MyVL6180Dev_t *VL6180xDev_t;
+
+#define VL6180xDevDataGet(dev, field) (dev->Data.field)
+#define VL6180xDevDataSet(dev, field, data) (dev->Data.field)=(data)
+
+#endif /* #else VL6180x_SINGLE_DEVICE_DRIVER */
+
+void VL6180x_PollDelay(VL6180xDev_t dev);
+
+void DISP_ExecLoopBody(void);
+#define VL6180x_PollDelay(dev)   DISP_ExecLoopBody();
+
+
+#endif  /* VL6180x_PLATFORM */
+
+
+