File content as of revision 86:4f9a848d74c7:

/**
  ******************************************************************************
  * @file    stm32f0xx_pwr.h
  * @author  MCD Application Team
  * @version V1.3.0
  * @date    16-January-2014
  * @brief   This file contains all the functions prototypes for the PWR firmware 
  *          library.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_PWR_H
#define __STM32F0XX_PWR_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"

/** @addtogroup STM32F0xx_StdPeriph_Driver
  * @{
  */

/** @addtogroup PWR
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/

/* Exported constants --------------------------------------------------------*/

/** @defgroup PWR_Exported_Constants
  * @{
  */ 

/** @defgroup PWR_PVD_detection_level 
  * @brief    This parameters are only applicable for STM32F051 and STM32F072 devices
  * @{
  */ 

#define PWR_PVDLevel_0                  PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1                  PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2                  PWR_CR_PLS_LEV2
#define PWR_PVDLevel_3                  PWR_CR_PLS_LEV3
#define PWR_PVDLevel_4                  PWR_CR_PLS_LEV4
#define PWR_PVDLevel_5                  PWR_CR_PLS_LEV5
#define PWR_PVDLevel_6                  PWR_CR_PLS_LEV6
#define PWR_PVDLevel_7                  PWR_CR_PLS_LEV7 

#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
                                 ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
                                 ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
                                 ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
/**
  * @}
  */

/** @defgroup PWR_WakeUp_Pins 
  * @{
  */

#define PWR_WakeUpPin_1                 PWR_CSR_EWUP1
#define PWR_WakeUpPin_2                 PWR_CSR_EWUP2
#define PWR_WakeUpPin_3                 PWR_CSR_EWUP3 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_4                 PWR_CSR_EWUP4 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_5                 PWR_CSR_EWUP5 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_6                 PWR_CSR_EWUP6 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_7                 PWR_CSR_EWUP7 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_8                 PWR_CSR_EWUP8 /*!< only applicable for STM32F072 devices */
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || ((PIN) == PWR_WakeUpPin_2) || \
                                ((PIN) == PWR_WakeUpPin_3) || ((PIN) == PWR_WakeUpPin_4) || \
                                ((PIN) == PWR_WakeUpPin_5) || ((PIN) == PWR_WakeUpPin_6) || \
                                ((PIN) == PWR_WakeUpPin_7) || ((PIN) == PWR_WakeUpPin_8))
/**
  * @}
  */

 
/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode 
  * @{
  */

#define PWR_Regulator_ON                ((uint32_t)0x00000000)
#define PWR_Regulator_LowPower          PWR_CR_LPSDSR
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
                                     ((REGULATOR) == PWR_Regulator_LowPower))
/**
  * @}
  */

/** @defgroup PWR_SLEEP_mode_entry 
  * @{
  */

#define PWR_SLEEPEntry_WFI              ((uint8_t)0x01)
#define PWR_SLEEPEntry_WFE              ((uint8_t)0x02)
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE))
 
/**
  * @}
  */

/** @defgroup PWR_STOP_mode_entry 
  * @{
  */

#define PWR_STOPEntry_WFI               ((uint8_t)0x01)
#define PWR_STOPEntry_WFE               ((uint8_t)0x02)
#define PWR_STOPEntry_SLEEPONEXIT       ((uint8_t)0x03)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE) ||\
                                  ((ENTRY) == PWR_STOPEntry_SLEEPONEXIT))
 
/**
  * @}
  */

/** @defgroup PWR_Flag 
  * @{
  */

#define PWR_FLAG_WU                     PWR_CSR_WUF
#define PWR_FLAG_SB                     PWR_CSR_SBF
#define PWR_FLAG_PVDO                   PWR_CSR_PVDO /*!< Not applicable for STM32F030 devices */
#define PWR_FLAG_VREFINTRDY             PWR_CSR_VREFINTRDYF 

#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
                               ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY))

#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */

/* Function used to set the PWR configuration to the default reset state ******/
void PWR_DeInit(void);

/* Backup Domain Access function **********************************************/
void PWR_BackupAccessCmd(FunctionalState NewState);

/* PVD configuration functions ************************************************/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); /*!< only applicable for STM32F051 and STM32F072 devices */
void PWR_PVDCmd(FunctionalState NewState); /*!< only applicable for STM32F051 and STM32F072 devices */

/* WakeUp pins configuration functions ****************************************/
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState);

/* Low Power modes configuration functions ************************************/
void PWR_EnterSleepMode(uint8_t PWR_SLEEPEntry);
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);

/* Flags management functions *************************************************/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);

#ifdef __cplusplus
}
#endif

#endif /* __STM32F0XX_PWR_H */

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/