erez i
version_2.0
Dependents: cc3000_ping_demo_try_2
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L152RE/stm32l1xx_spi.h
- Revision:
- 77:869cf507173a
- Child:
- 81:7d30d6019079
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_spi.h Fri Feb 14 14:36:43 2014 +0000
@@ -0,0 +1,524 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx_spi.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 31-January-2014
+ * @brief This file contains all the functions prototypes for the SPI
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_SPI_H
+#define __STM32L1xx_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx.h"
+
+/** @addtogroup STM32L1xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SPI Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode.
+ This parameter can be a value of @ref SPI_data_direction */
+
+ uint16_t SPI_Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint16_t SPI_DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */
+}SPI_InitTypeDef;
+
+/**
+ * @brief I2S Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t I2S_Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref SPI_I2S_Mode */
+
+ uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref SPI_I2S_Standard */
+
+ uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref SPI_I2S_Data_Format */
+
+ uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref SPI_I2S_MCLK_Output */
+
+ uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref SPI_I2S_Audio_Frequency */
+
+ uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref SPI_I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
+ ((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+/** @defgroup SPI_data_direction
+ * @{
+ */
+
+#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
+#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
+#define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
+#define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \
+ ((MODE) == SPI_Direction_2Lines_RxOnly) || \
+ ((MODE) == SPI_Direction_1Line_Rx) || \
+ ((MODE) == SPI_Direction_1Line_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+
+#define SPI_Mode_Master ((uint16_t)0x0104)
+#define SPI_Mode_Slave ((uint16_t)0x0000)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \
+ ((MODE) == SPI_Mode_Slave))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+
+#define SPI_DataSize_16b ((uint16_t)0x0800)
+#define SPI_DataSize_8b ((uint16_t)0x0000)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \
+ ((DATASIZE) == SPI_DataSize_8b))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+
+#define SPI_CPOL_Low ((uint16_t)0x0000)
+#define SPI_CPOL_High ((uint16_t)0x0002)
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \
+ ((CPOL) == SPI_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+
+#define SPI_CPHA_1Edge ((uint16_t)0x0000)
+#define SPI_CPHA_2Edge ((uint16_t)0x0001)
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \
+ ((CPHA) == SPI_CPHA_2Edge))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+
+#define SPI_NSS_Soft ((uint16_t)0x0200)
+#define SPI_NSS_Hard ((uint16_t)0x0000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \
+ ((NSS) == SPI_NSS_Hard))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+
+#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
+#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
+#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
+#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
+#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
+#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
+#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
+#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_4) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_8) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_16) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_32) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_64) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_128) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+
+#define SPI_FirstBit_MSB ((uint16_t)0x0000)
+#define SPI_FirstBit_LSB ((uint16_t)0x0080)
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \
+ ((BIT) == SPI_FirstBit_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_Mode
+ * @{
+ */
+
+#define I2S_Mode_SlaveTx ((uint16_t)0x0000)
+#define I2S_Mode_SlaveRx ((uint16_t)0x0100)
+#define I2S_Mode_MasterTx ((uint16_t)0x0200)
+#define I2S_Mode_MasterRx ((uint16_t)0x0300)
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \
+ ((MODE) == I2S_Mode_SlaveRx) || \
+ ((MODE) == I2S_Mode_MasterTx)|| \
+ ((MODE) == I2S_Mode_MasterRx))
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_I2S_Standard
+ * @{
+ */
+
+#define I2S_Standard_Phillips ((uint16_t)0x0000)
+#define I2S_Standard_MSB ((uint16_t)0x0010)
+#define I2S_Standard_LSB ((uint16_t)0x0020)
+#define I2S_Standard_PCMShort ((uint16_t)0x0030)
+#define I2S_Standard_PCMLong ((uint16_t)0x00B0)
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \
+ ((STANDARD) == I2S_Standard_MSB) || \
+ ((STANDARD) == I2S_Standard_LSB) || \
+ ((STANDARD) == I2S_Standard_PCMShort) || \
+ ((STANDARD) == I2S_Standard_PCMLong))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_Data_Format
+ * @{
+ */
+
+#define I2S_DataFormat_16b ((uint16_t)0x0000)
+#define I2S_DataFormat_16bextended ((uint16_t)0x0001)
+#define I2S_DataFormat_24b ((uint16_t)0x0003)
+#define I2S_DataFormat_32b ((uint16_t)0x0005)
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \
+ ((FORMAT) == I2S_DataFormat_16bextended) || \
+ ((FORMAT) == I2S_DataFormat_24b) || \
+ ((FORMAT) == I2S_DataFormat_32b))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_MCLK_Output
+ * @{
+ */
+
+#define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
+#define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \
+ ((OUTPUT) == I2S_MCLKOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_Audio_Frequency
+ * @{
+ */
+
+#define I2S_AudioFreq_192k ((uint32_t)192000)
+#define I2S_AudioFreq_96k ((uint32_t)96000)
+#define I2S_AudioFreq_48k ((uint32_t)48000)
+#define I2S_AudioFreq_44k ((uint32_t)44100)
+#define I2S_AudioFreq_32k ((uint32_t)32000)
+#define I2S_AudioFreq_22k ((uint32_t)22050)
+#define I2S_AudioFreq_16k ((uint32_t)16000)
+#define I2S_AudioFreq_11k ((uint32_t)11025)
+#define I2S_AudioFreq_8k ((uint32_t)8000)
+#define I2S_AudioFreq_Default ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \
+ ((FREQ) <= I2S_AudioFreq_192k)) || \
+ ((FREQ) == I2S_AudioFreq_Default))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_Clock_Polarity
+ * @{
+ */
+
+#define I2S_CPOL_Low ((uint16_t)0x0000)
+#define I2S_CPOL_High ((uint16_t)0x0008)
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \
+ ((CPOL) == I2S_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_DMA_transfer_requests
+ * @{
+ */
+
+#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
+#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
+#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSS_internal_software_management
+ * @{
+ */
+
+#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
+#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
+#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \
+ ((INTERNAL) == SPI_NSSInternalSoft_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Transmit_Receive
+ * @{
+ */
+
+#define SPI_CRC_Tx ((uint8_t)0x00)
+#define SPI_CRC_Rx ((uint8_t)0x01)
+#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_direction_transmit_receive
+ * @{
+ */
+
+#define SPI_Direction_Rx ((uint16_t)0xBFFF)
+#define SPI_Direction_Tx ((uint16_t)0x4000)
+#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \
+ ((DIRECTION) == SPI_Direction_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_interrupts_definition
+ * @{
+ */
+
+#define SPI_I2S_IT_TXE ((uint8_t)0x71)
+#define SPI_I2S_IT_RXNE ((uint8_t)0x60)
+#define SPI_I2S_IT_ERR ((uint8_t)0x50)
+#define I2S_IT_UDR ((uint8_t)0x53)
+#define SPI_I2S_IT_FRE ((uint8_t)0x58)
+
+#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == SPI_I2S_IT_RXNE) || \
+ ((IT) == SPI_I2S_IT_ERR))
+
+#define SPI_I2S_IT_OVR ((uint8_t)0x56)
+#define SPI_IT_MODF ((uint8_t)0x55)
+#define SPI_IT_CRCERR ((uint8_t)0x54)
+
+#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR))
+
+#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == SPI_IT_CRCERR) || ((IT) == SPI_IT_MODF) || \
+ ((IT) == SPI_I2S_IT_OVR) || ((IT) == I2S_IT_UDR) ||\
+ ((IT) == SPI_I2S_IT_FRE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_flags_definition
+ * @{
+ */
+
+#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
+#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
+#define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
+#define I2S_FLAG_UDR ((uint16_t)0x0008)
+#define SPI_FLAG_CRCERR ((uint16_t)0x0010)
+#define SPI_FLAG_MODF ((uint16_t)0x0020)
+#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
+#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
+#define SPI_I2S_FLAG_FRE ((uint16_t)0x0100)
+
+#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR))
+#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \
+ ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \
+ ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \
+ ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \
+ ((FLAG) == SPI_I2S_FLAG_FRE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_polynomial
+ * @{
+ */
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_Legacy
+ * @{
+ */
+
+#define SPI_DMAReq_Tx SPI_I2S_DMAReq_Tx
+#define SPI_DMAReq_Rx SPI_I2S_DMAReq_Rx
+#define SPI_IT_TXE SPI_I2S_IT_TXE
+#define SPI_IT_RXNE SPI_I2S_IT_RXNE
+#define SPI_IT_ERR SPI_I2S_IT_ERR
+#define SPI_IT_OVR SPI_I2S_IT_OVR
+#define SPI_FLAG_RXNE SPI_I2S_FLAG_RXNE
+#define SPI_FLAG_TXE SPI_I2S_FLAG_TXE
+#define SPI_FLAG_OVR SPI_I2S_FLAG_OVR
+#define SPI_FLAG_BSY SPI_I2S_FLAG_BSY
+#define SPI_DeInit SPI_I2S_DeInit
+#define SPI_ITConfig SPI_I2S_ITConfig
+#define SPI_DMACmd SPI_I2S_DMACmd
+#define SPI_SendData SPI_I2S_SendData
+#define SPI_ReceiveData SPI_I2S_ReceiveData
+#define SPI_GetFlagStatus SPI_I2S_GetFlagStatus
+#define SPI_ClearFlag SPI_I2S_ClearFlag
+#define SPI_GetITStatus SPI_I2S_GetITStatus
+#define SPI_ClearITPendingBit SPI_I2S_ClearITPendingBit
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+/* Function used to set the SPI configuration to the default reset state *****/
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
+
+/* Initialization and Configuration functions *********************************/
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+
+/* Data transfers functions ***************************************************/
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
+
+/* Hardware CRC Calculation functions *****************************************/
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_TransmitCRC(SPI_TypeDef* SPIx);
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
+
+/* DMA transfers management functions *****************************************/
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
+
+/* Interrupts and flags management functions **********************************/
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32L1xx_SPI_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/