Emilio Monti
mbed libraries for KL25Z
Diff: Ethernet.h
- Revision:
- 2:e9a661555b58
- Parent:
- 0:8024c367e29f
- Child:
- 8:c14af7958ef5
--- a/Ethernet.h Fri Oct 05 15:45:13 2012 +0000
+++ b/Ethernet.h Wed Oct 10 14:14:12 2012 +0000
@@ -1,173 +1,173 @@
-/* mbed Microcontroller Library - Ethernet
- * Copyright (c) 2009-2011 ARM Limited. All rights reserved.
- */
-
-#ifndef MBED_ETHERNET_H
-#define MBED_ETHERNET_H
-
-#include "device.h"
-
-#if DEVICE_ETHERNET
-
-#include "Base.h"
-
-namespace mbed {
-
-/* Class: Ethernet
- * An ethernet interface, to use with the ethernet pins.
- *
- * Example:
- * > // Read destination and source from every ethernet packet
- * >
- * > #include "mbed.h"
- * >
- * > Ethernet eth;
- * >
- * > int main() {
- * > char buf[0x600];
- * >
- * > while(1) {
- * > int size = eth.receive();
- * > if(size > 0) {
- * > eth.read(buf, size);
- * > printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
- * > buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- * > printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
- * > buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
- * > }
- * >
- * > wait(1);
- * > }
- * > }
- *
- */
-class Ethernet : public Base {
-
-public:
-
- /* Constructor: Ethernet
- * Initialise the ethernet interface.
- */
- Ethernet();
-
- /* Destructor: Ethernet
- * Powers the hardware down.
- */
- virtual ~Ethernet();
-
- enum Mode {
- AutoNegotiate
- , HalfDuplex10
- , FullDuplex10
- , HalfDuplex100
- , FullDuplex100
- };
-
- /* Function: write
- * Writes into an outgoing ethernet packet.
- *
- * It will append size bytes of data to the previously written bytes.
- *
- * Variables:
- * data - An array to write.
- * size - The size of data.
- *
- * Returns:
- * The number of written bytes.
- */
- int write(const char *data, int size);
-
- /* Function: send
- * Send an outgoing ethernet packet.
- *
- * After filling in the data in an ethernet packet it must be send.
- * Send will provide a new packet to write to.
- *
- * Returns:
- * 0 - If the sending was failed.
- * 1 - If the package is successfully sent.
- */
- int send();
-
- /* Function: receive
- * Recevies an arrived ethernet packet.
- *
- * Receiving an ethernet packet will drop the last received ethernet packet
- * and make a new ethernet packet ready to read.
- * If no ethernet packet is arrived it will return 0.
- *
- * Returns:
- * 0 - If no ethernet packet is arrived.
- * The size of the arrived packet.
- */
- int receive();
-
- /* Function: read
- * Read from an recevied ethernet packet.
- *
- * After receive returnd a number bigger than 0it is
- * possible to read bytes from this packet.
- * Read will write up to size bytes into data.
- *
- * It is possible to use read multible times.
- * Each time read will start reading after the last read byte before.
- *
- * Returns:
- * The number of byte read.
- */
- int read(char *data, int size);
-
- /* Function: address
- * Gives the ethernet address of the mbed.
- *
- * Variables:
- * mac - Must be a pointer to a 6 byte char array to copy the ethernet address in.
- */
- void address(char *mac);
-
- /* Function: link
- * Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
- *
- * Returns:
- * 0 - If no ethernet link is pressent.
- * 1 - If an ethernet link is pressent.
- *
- * Example:
- * > // Using the Ethernet link function
- * > #include "mbed.h"
- * >
- * > Ethernet eth;
- * >
- * > int main() {
- * > wait(1); // Needed after startup.
- * > if(eth.link()) {
- * > printf("online\n");
- * > } else {
- * > printf("offline\n");
- * > }
- * > }
- *
- */
- int link();
-
- /* Function: set_link
- * Sets the speed and duplex parameters of an ethernet link
- *
- * Variables:
- * mode - the speed and duplex mode to set the link to:
- *
- * > AutoNegotiate Auto negotiate speed and duplex
- * > HalfDuplex10 10 Mbit, half duplex
- * > FullDuplex10 10 Mbit, full duplex
- * > HalfDuplex100 100 Mbit, half duplex
- * > FullDuplex100 100 Mbit, full duplex
- */
- void set_link(Mode mode);
-
-};
-
-} // namespace mbed
-
-#endif
-
-#endif
+/* mbed Microcontroller Library - Ethernet
+ * Copyright (c) 2009-2011 ARM Limited. All rights reserved.
+ */
+
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "device.h"
+
+#if DEVICE_ETHERNET
+
+#include "Base.h"
+
+namespace mbed {
+
+/* Class: Ethernet
+ * An ethernet interface, to use with the ethernet pins.
+ *
+ * Example:
+ * > // Read destination and source from every ethernet packet
+ * >
+ * > #include "mbed.h"
+ * >
+ * > Ethernet eth;
+ * >
+ * > int main() {
+ * > char buf[0x600];
+ * >
+ * > while(1) {
+ * > int size = eth.receive();
+ * > if(size > 0) {
+ * > eth.read(buf, size);
+ * > printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * > buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ * > printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * > buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ * > }
+ * >
+ * > wait(1);
+ * > }
+ * > }
+ *
+ */
+class Ethernet : public Base {
+
+public:
+
+ /* Constructor: Ethernet
+ * Initialise the ethernet interface.
+ */
+ Ethernet();
+
+ /* Destructor: Ethernet
+ * Powers the hardware down.
+ */
+ virtual ~Ethernet();
+
+ enum Mode {
+ AutoNegotiate
+ , HalfDuplex10
+ , FullDuplex10
+ , HalfDuplex100
+ , FullDuplex100
+ };
+
+ /* Function: write
+ * Writes into an outgoing ethernet packet.
+ *
+ * It will append size bytes of data to the previously written bytes.
+ *
+ * Variables:
+ * data - An array to write.
+ * size - The size of data.
+ *
+ * Returns:
+ * The number of written bytes.
+ */
+ int write(const char *data, int size);
+
+ /* Function: send
+ * Send an outgoing ethernet packet.
+ *
+ * After filling in the data in an ethernet packet it must be send.
+ * Send will provide a new packet to write to.
+ *
+ * Returns:
+ * 0 - If the sending was failed.
+ * 1 - If the package is successfully sent.
+ */
+ int send();
+
+ /* Function: receive
+ * Recevies an arrived ethernet packet.
+ *
+ * Receiving an ethernet packet will drop the last received ethernet packet
+ * and make a new ethernet packet ready to read.
+ * If no ethernet packet is arrived it will return 0.
+ *
+ * Returns:
+ * 0 - If no ethernet packet is arrived.
+ * The size of the arrived packet.
+ */
+ int receive();
+
+ /* Function: read
+ * Read from an recevied ethernet packet.
+ *
+ * After receive returnd a number bigger than 0it is
+ * possible to read bytes from this packet.
+ * Read will write up to size bytes into data.
+ *
+ * It is possible to use read multible times.
+ * Each time read will start reading after the last read byte before.
+ *
+ * Returns:
+ * The number of byte read.
+ */
+ int read(char *data, int size);
+
+ /* Function: address
+ * Gives the ethernet address of the mbed.
+ *
+ * Variables:
+ * mac - Must be a pointer to a 6 byte char array to copy the ethernet address in.
+ */
+ void address(char *mac);
+
+ /* Function: link
+ * Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+ *
+ * Returns:
+ * 0 - If no ethernet link is pressent.
+ * 1 - If an ethernet link is pressent.
+ *
+ * Example:
+ * > // Using the Ethernet link function
+ * > #include "mbed.h"
+ * >
+ * > Ethernet eth;
+ * >
+ * > int main() {
+ * > wait(1); // Needed after startup.
+ * > if(eth.link()) {
+ * > printf("online\n");
+ * > } else {
+ * > printf("offline\n");
+ * > }
+ * > }
+ *
+ */
+ int link();
+
+ /* Function: set_link
+ * Sets the speed and duplex parameters of an ethernet link
+ *
+ * Variables:
+ * mode - the speed and duplex mode to set the link to:
+ *
+ * > AutoNegotiate Auto negotiate speed and duplex
+ * > HalfDuplex10 10 Mbit, half duplex
+ * > FullDuplex10 10 Mbit, full duplex
+ * > HalfDuplex100 100 Mbit, half duplex
+ * > FullDuplex100 100 Mbit, full duplex
+ */
+ void set_link(Mode mode);
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
