Revision 0:d1e4929f6956, committed 2014-10-03

Comitter:

embeddedartists

Date:

Fri Oct 03 13:37:30 2014 +0000

Commit message:

First version

Changed in this revision

diff -r 000000000000 -r d1e4929f6956 AR1021I2C.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/AR1021I2C.cpp	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,560 @@
+/*
+ *  Copyright 2013 Embedded Artists AB
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+
+#include "mbed.h"
+#include "mbed_debug.h"
+
+#include "AR1021I2C.h"
+
+/******************************************************************************
+ * Defines and typedefs
+ *****************************************************************************/
+
+#define AR1021_REG_TOUCH_THRESHOLD        (0x02)
+#define AR1021_REG_SENS_FILTER            (0x03)
+#define AR1021_REG_SAMPLING_FAST          (0x04)
+#define AR1021_REG_SAMPLING_SLOW          (0x05)
+#define AR1021_REG_ACC_FILTER_FAST        (0x06)
+#define AR1021_REG_ACC_FILTER_SLOW        (0x07)
+#define AR1021_REG_SPEED_THRESHOLD        (0x08)
+#define AR1021_REG_SLEEP_DELAY            (0x0A)
+#define AR1021_REG_PEN_UP_DELAY           (0x0B)
+#define AR1021_REG_TOUCH_MODE             (0x0C)
+#define AR1021_REG_TOUCH_OPTIONS          (0x0D)
+#define AR1021_REG_CALIB_INSETS           (0x0E)
+#define AR1021_REG_PEN_STATE_REPORT_DELAY (0x0F)
+#define AR1021_REG_TOUCH_REPORT_DELAY     (0x11)
+
+
+#define AR1021_CMD_GET_VERSION                 (0x10)
+#define AR1021_CMD_ENABLE_TOUCH                (0x12)
+#define AR1021_CMD_DISABLE_TOUCH               (0x13)
+#define AR1021_CMD_CALIBRATE_MODE              (0x14)
+#define AR1021_CMD_REGISTER_READ               (0x20)
+#define AR1021_CMD_REGISTER_WRITE              (0x21)
+#define AR1021_CMD_REGISTER_START_ADDR_REQUEST (0x22)
+#define AR1021_CMD_REGISTER_WRITE_TO_EEPROM    (0x23)
+#define AR1021_CMD_EEPROM_READ                 (0x28)
+#define AR1021_CMD_EEPROM_WRITE                (0x29)
+#define AR1021_CMD_EEPROM_WRITE_TO_REGISTERS   (0x2B)
+
+#define AR1021_RESP_STAT_OK           (0x00)
+#define AR1021_RESP_STAT_CMD_UNREC    (0x01)
+#define AR1021_RESP_STAT_HDR_UNREC    (0x03)
+#define AR1021_RESP_STAT_TIMEOUT      (0x04)
+#define AR1021_RESP_STAT_CANCEL_CALIB (0xFC)
+
+
+#define AR1021_ERR_NO_HDR      (-1000)
+#define AR1021_ERR_INV_LEN     (-1001)
+#define AR1021_ERR_INV_RESP    (-1002)
+#define AR1021_ERR_INV_RESPLEN (-1003)
+#define AR1021_ERR_TIMEOUT     (-1004)
+
+// bit 7 is always 1 and bit 0 defines pen up or down
+#define AR1021_PEN_MASK (0x81)
+
+#define AR1021_NUM_CALIB_POINTS (4)
+
+#define AR1021_ADDR  (0x4D << 1)
+
+#define AR1021_TIMEOUT     1000        //how many ms to wait for responce 
+#define AR1021_RETRY          5        //how many times to retry sending command 
+
+#define AR1021_MIN(__a, __b) (((__a)<(__b))?(__a):(__b))
+
+
+AR1021I2C::AR1021I2C(PinName sda, PinName scl, PinName siq) :
+_i2c(sda, scl), _siq(siq), _siqIrq(siq)
+{
+    _i2c.frequency(200000);
+
+    // default calibration inset is 25 -> (25/2 = 12.5%)
+    _inset = 25;
+
+    // make sure _calibPoint has an invalid value to begin with
+    // correct value is set in calibrateStart()
+    _calibPoint = AR1021_NUM_CALIB_POINTS+1;
+
+    _x = 0;
+    _y = 0;
+    _pen = 0;
+
+    _initialized = false;
+}
+
+
+bool AR1021I2C::read(touchCoordinate_t &coord) {
+
+    if (!_initialized) return false;
+
+    coord.x = _x * _width/4095;
+    coord.y = _y * _height/4095;
+    coord.z = _pen;
+
+    return true;
+}
+
+
+bool AR1021I2C::init(uint16_t width, uint16_t height) {
+    int result = 0;
+    bool ok = false;
+    int attempts = 0;
+
+    _width = width;
+    _height = height;
+
+    while (1) {
+
+        do {
+            // disable touch
+            result = cmd(AR1021_CMD_DISABLE_TOUCH, NULL, 0, NULL, 0);
+            if (result != 0) {
+                debug("disable touch failed (%d)\n", result);
+                break;
+            }
+
+            char regOffset = 0;
+            int regOffLen = 1;
+            result = cmd(AR1021_CMD_REGISTER_START_ADDR_REQUEST, NULL, 0,
+                    &regOffset, &regOffLen);
+            if (result != 0) {
+                debug("register offset request failed (%d)\n", result);
+                break;
+            }
+
+            // enable calibrated coordinates
+            //                  high, low address,                        len,  value
+            char toptions[4] = {0x00, AR1021_REG_TOUCH_OPTIONS+regOffset, 0x01, 0x01};
+            result = cmd(AR1021_CMD_REGISTER_WRITE, toptions, 4, NULL, 0);
+            if (result != 0) {
+                debug("register write request failed (%d)\n", result);
+                break;
+            }
+
+            // save registers to eeprom
+            result = cmd(AR1021_CMD_REGISTER_WRITE_TO_EEPROM, NULL, 0, NULL, 0);
+            if (result != 0) {
+                debug("register write to eeprom failed (%d)\n", result);
+                break;
+            }
+
+            // enable touch
+            result = cmd(AR1021_CMD_ENABLE_TOUCH, NULL, 0, NULL, 0);
+            if (result != 0) {
+                debug("enable touch failed (%d)\n", result);
+                break;
+            }
+
+            _siqIrq.rise(this, &AR1021I2C::readTouchIrq);
+
+            _initialized = true;
+            ok = true;
+
+        } while(0);
+
+        if (ok) break;
+
+        // try to run the initialize sequence at most 2 times
+        if(++attempts >= 2) break;
+    }
+
+
+    return ok;
+}
+
+bool AR1021I2C::calibrateStart() {
+    bool ok = false;
+    int result = 0;
+    int attempts = 0;
+
+    if (!_initialized) return false;
+
+    _siqIrq.rise(NULL);
+
+    while(1) {
+
+        do {
+            // disable touch
+            result = cmd(AR1021_CMD_DISABLE_TOUCH, NULL, 0, NULL, 0);
+            if (result != 0) {
+                debug("disable touch failed (%d)\n", result);
+                break;
+            }
+
+            char regOffset = 0;
+            int regOffLen = 1;
+            result = cmd(AR1021_CMD_REGISTER_START_ADDR_REQUEST, NULL, 0,
+                    &regOffset, &regOffLen);
+            if (result != 0) {
+                debug("register offset request failed (%d)\n", result);
+                break;
+            }
+
+            // set insets
+            // enable calibrated coordinates
+            //                high, low address,                       len,  value
+            char insets[4] = {0x00, AR1021_REG_CALIB_INSETS+regOffset, 0x01, _inset};
+            result = cmd(AR1021_CMD_REGISTER_WRITE, insets, 4, NULL, 0);
+            if (result != 0) {
+                debug("register write request failed (%d)\n", result);
+                break;
+            }
+
+            // calibration mode
+            char calibType = 4;
+            result = cmd(AR1021_CMD_CALIBRATE_MODE, &calibType, 1, NULL, 0, false);
+            if (result != 0) {
+                debug("calibration mode failed (%d)\n", result);
+                break;
+            }
+
+            _calibPoint = 0;
+            ok = true;
+
+        } while(0);
+
+        if (ok) break;
+
+        // try to run the calibrate mode sequence at most 2 times
+        if (++attempts >= 2) break;
+    }
+
+    return ok;
+}
+
+bool AR1021I2C::getNextCalibratePoint(uint16_t* x, uint16_t* y) {
+
+    if (!_initialized) return false;
+    if (x == NULL || y == NULL) return false;
+
+    int xInset = (_width * _inset / 100) / 2;
+    int yInset = (_height * _inset / 100) / 2;
+
+    switch(_calibPoint) {
+    case 0:
+        *x = xInset;
+        *y = yInset;
+        break;
+    case 1:
+        *x = _width - xInset;
+        *y = yInset;
+        break;
+    case 2:
+        *x = _width - xInset;
+        *y = _height - yInset;
+        break;
+    case 3:
+        *x = xInset;
+        *y = _height - yInset;
+        break;
+    default:
+        return false;
+    }
+
+    return true;
+}
+
+bool AR1021I2C::waitForCalibratePoint(bool* morePoints, uint32_t timeout) {
+    int result = 0;
+    bool ret = false;
+
+    if (!_initialized) return false;
+
+    do {
+        if (morePoints == NULL || _calibPoint >= AR1021_NUM_CALIB_POINTS) {
+            break;
+        }
+
+        // wait for response
+        result = waitForCalibResponse(timeout);
+        if (result != 0) {
+            debug("wait for calibration response failed (%d)\n", result);
+            break;
+        }
+
+        _calibPoint++;
+        *morePoints = (_calibPoint < AR1021_NUM_CALIB_POINTS);
+
+
+        // no more points -> enable touch
+        if (!(*morePoints)) {
+
+            // wait for calibration data to be written to eeprom
+            // before enabling touch
+            result = waitForCalibResponse(timeout);
+            if (result != 0) {
+                debug("wait for calibration response failed (%d)\n", result);
+                break;
+            }
+
+
+            // clear chip-select since calibration is done;
+//            _cs = 1;
+
+            result = cmd(AR1021_CMD_ENABLE_TOUCH, NULL, 0, NULL, 0);
+            if (result != 0) {
+                debug("enable touch failed (%d)\n", result);
+                break;
+            }
+
+            _siqIrq.rise(this, &AR1021I2C::readTouchIrq);
+        }
+
+        ret = true;
+
+    } while (0);
+
+
+
+    if (!ret) {
+        // make sure to set chip-select off in case of an error
+//        _cs = 1;
+        // calibration must restart if an error occurred
+        _calibPoint = AR1021_NUM_CALIB_POINTS+1;
+    }
+
+
+
+    return ret;
+}
+
+int AR1021I2C::cmd(char cmd, char* data, int len, char* respBuf, int* respLen,
+        bool setCsOff) {
+
+    int ret = 0;
+    int readLen = (respLen == NULL) ? 0 : *respLen;
+    for (int attempt = 1; attempt <= AR1021_RETRY; attempt++) {
+        if (attempt > 1) {
+            wait_ms(50);
+        }
+
+        // command request
+        // ---------------
+        // 0x00 0x55 len cmd data
+        // 0x00 = protocol command byte
+        // 0x55 = header
+        // len = data length + cmd (1)
+        // data = data to send
+
+        _i2c.start(); 
+        _i2c.write(AR1021_ADDR);                   //send write address 
+        _i2c.write(0x00); 
+        _i2c.write(0x55);                          //header 
+        _i2c.write(len+1);                         //message length 
+        _i2c.write(cmd);
+        for (int i = 0; i < len; i++) {
+            _i2c.write(data[i]);
+        }
+        wait_us(60);
+        _i2c.stop();
+     
+        // wait for response (siq goes high when response is available)
+        Timer t;
+        t.start();
+        while(_siq.read() != 1 && t.read_ms() < AR1021_TIMEOUT);
+        
+        if (t.read_ms() < AR1021_TIMEOUT) {
+        
+            // command response
+            // ---------------
+            // 0x55 len status cmd data
+            // 0x55 = header
+            // len = number of bytes following the len byte (i.e. including the status&cmd)
+            // status = status
+            // cmd = command ID
+            // data = data to receive
+            _i2c.start();
+            _i2c.write(AR1021_ADDR + 1);        //send read address 
+            char header = _i2c.read(1);         //header should always be 0x55
+            if (header != 0x55) {
+                ret = AR1021_ERR_NO_HDR;
+                continue;
+            }
+            char length = _i2c.read(1);         //data length
+            if (length < 2) {
+                ret = AR1021_ERR_INV_LEN;       //must have at least status and command bytes
+                continue;
+            }
+            length -= 2;
+            if (length > readLen) {
+                ret = AR1021_ERR_INV_LEN;       //supplied buffer is not enough
+                continue;
+            }
+
+            char status = _i2c.read(1);         //command status
+            char usedCmd;
+            if (readLen <= 0) {
+                usedCmd = _i2c.read(0);         //no data => read command byte + NACK
+            } else {
+                usedCmd = _i2c.read(1);         //which command
+
+                //we need to send a NACK on the last read. 
+                int i;
+                for (i = 0; i < (length-1); i++) {
+                    respBuf[i] = _i2c.read(1);
+                }
+                respBuf[i] = _i2c.read(0);      //last returned data byte + NACK
+            }
+            _i2c.stop();
+            
+            
+            if (status != AR1021_RESP_STAT_OK) {
+                ret = -status;
+                continue;
+            }
+            if (usedCmd != cmd) {
+                ret = AR1021_ERR_INV_RESP;
+                continue;
+            }
+            
+            // success
+            ret = 0;
+            break;
+            
+        } else {
+            ret = AR1021_ERR_TIMEOUT;
+            continue;
+        }
+    }
+
+    return ret;
+}
+
+int AR1021I2C::waitForCalibResponse(uint32_t timeout) {
+    Timer t;
+    int ret = 0;
+
+    t.start();
+
+    // wait for siq
+    while (_siq.read() != 1 &&
+            (timeout == 0 || (uint32_t)t.read_ms() < (int)timeout));
+
+
+    do {
+
+        if (timeout >  0 && (uint32_t)t.read_ms() >= timeout) {
+            ret = AR1021_ERR_TIMEOUT;
+            break;
+        }
+
+        // command response
+        // ---------------
+        // 0x55 len status cmd data
+        // 0x55 = header
+        // len = number of bytes following the len byte (should be 2)
+        // status = status
+        // cmd = command ID
+        _i2c.start();
+        _i2c.write(AR1021_ADDR + 1);        //send read address 
+        char header = _i2c.read(1);         //header should always be 0x55  
+        char length = _i2c.read(1);         //data length
+
+        if (header != 0x55) {
+            ret = AR1021_ERR_NO_HDR;
+            break;
+        }
+        if (length < 2) {
+            ret = AR1021_ERR_INV_LEN;
+            break;
+        }
+        char status = _i2c.read(1);         //status
+        char cmd    = _i2c.read(0);         //command, should be NACK'ed
+        _i2c.stop();
+        if (status != AR1021_RESP_STAT_OK) {
+            ret = -status;
+            break;
+        }
+        if (cmd != AR1021_CMD_CALIBRATE_MODE) {
+            ret = AR1021_ERR_INV_RESP;
+            break;
+        }
+        
+        // success
+        ret = 0;
+
+    } while (0);
+
+    return ret;
+}
+
+
+void AR1021I2C::readTouchIrq() {
+    while(_siq.read() == 1) {
+
+        // touch coordinates are sent in a 5-byte data packet
+        _i2c.start();
+        _i2c.write(AR1021_ADDR + 1);        //send read address 
+        int pen = _i2c.read(1);
+        int xlo = _i2c.read(1);
+        int xhi = _i2c.read(1);
+        int ylo = _i2c.read(1);
+        int yhi = _i2c.read(0);
+        _i2c.stop();
+        
+        // pen down
+        if ((pen&AR1021_PEN_MASK) == (1<<7|1<<0)) {
+            _pen = 1;
+        }
+        // pen up
+        else if ((pen&AR1021_PEN_MASK) == (1<<7)){
+            _pen = 0;
+        }
+        // invalid value
+        else {
+            continue;
+        }
+
+        _x = ((xhi<<7)|xlo);
+        _y = ((yhi<<7)|ylo);
+    }
+}
+
+bool AR1021I2C::info(int* verHigh, int* verLow, int* resBits, int* type)
+{
+    char buff[3] = {0,0,0};
+    int read = 3;
+    int res = cmd(AR1021_CMD_GET_VERSION, NULL, 0, buff, &read);
+    if (res == 0) {
+        *verHigh = buff[0];
+        *verLow = buff[1];
+        switch(buff[2] & 3) {
+            case 0:   
+                *resBits = 8;
+                break;
+            case 1:   
+                *resBits = 10;
+                break;
+            case 2:   
+                *resBits = 12;
+                break;
+            case 3:   
+                *resBits = 12;
+                break;
+            default:
+                res = 25;
+                printf("Invalid resolution %d\n", buff[2]&3);
+                break;
+        }
+        *type = buff[2]>>2;
+    }
+    return (res == 0);
+}

diff -r 000000000000 -r d1e4929f6956 AR1021I2C.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/AR1021I2C.h	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,77 @@
+/*
+ *  Copyright 2013 Embedded Artists AB
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#ifndef AR1021I2C_H
+#define AR1021I2C_H
+
+#include "TouchPanel.h"
+
+/**
+ * Microchip Touch Screen Controller (AR1021).
+ *
+ * Please note that this touch panel has an on-board storage for
+ * calibration data. Once a successful calibration has been performed
+ * it is not needed to do additional calibrations since the stored
+ * calibration data will be used.
+ */
+class AR1021I2C : public TouchPanel {
+public:
+
+
+    /**
+     * Constructor
+     *
+     * @param mosi I2C SDA pin
+     * @param miso I2C SCL pin
+     * @param siq interrupt pin
+     */
+    AR1021I2C(PinName sda, PinName scl, PinName siq);
+
+    bool info(int* verHigh, int* verLow, int* resBits, int* type);
+
+    virtual bool init(uint16_t width, uint16_t height);
+    virtual bool read(touchCoordinate_t &coord);
+    virtual bool calibrateStart();
+    virtual bool getNextCalibratePoint(uint16_t* x, uint16_t* y);
+    virtual bool waitForCalibratePoint(bool* morePoints, uint32_t timeout);
+
+private:
+
+
+    I2C _i2c;
+    DigitalIn _siq;
+    InterruptIn _siqIrq;
+    bool _initialized;
+
+
+    int32_t _x;
+    int32_t _y;
+    int32_t _pen;
+
+    uint16_t _width;
+    uint16_t _height;
+    uint8_t _inset;
+
+    int _calibPoint;
+
+
+    int cmd(char cmd, char* data, int len, char* respBuf, int* respLen, bool setCsOff=true);
+    int waitForCalibResponse(uint32_t timeout);
+    void readTouchIrq();
+};
+
+#endif
+

diff -r 000000000000 -r d1e4929f6956 EALib.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EALib.lib	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,1 @@
+https://mbed.org/users/embeddedartists/code/EALib/#b3a179cc3d88

diff -r 000000000000 -r d1e4929f6956 EaLcdBoardGPIO.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EaLcdBoardGPIO.cpp	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,96 @@
+/*
+ *  Copyright 2013 Embedded Artists AB
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+
+#include "mbed.h"
+#include "EaLcdBoardGPIO.h"
+
+/******************************************************************************
+ * Defines and typedefs
+ *****************************************************************************/
+
+
+EaLcdBoardGPIO::EaLcdBoardGPIO(PinName sda, PinName scl)
+  : EaLcdBoard(sda, scl), /*pinWP(P4_15),*/ pin3v3(P2_0), pin5v(P2_21), pinDE(P2_11), pinContrast(P2_1)
+{
+  pinContrast.period_ms(10);
+  setWriteProtect(true);
+  set3V3Signal(false);
+  set5VSignal(false);
+  setDisplayEnableSignal(false);
+  setBacklightContrast(0);
+}
+
+
+void EaLcdBoardGPIO::setWriteProtect(bool enable)
+{  
+    // Not Applicable
+}
+
+void EaLcdBoardGPIO::set3V3Signal(bool enabled) { //P2.0 L=3.3V on
+    if (enabled) {
+        pin3v3 = 0;
+    } else {
+        pin3v3 = 1;
+    }
+}
+
+void EaLcdBoardGPIO::set5VSignal(bool enabled) { //P2.21 H=5V on
+    if (enabled) {
+        pin5v = 1;
+    } else {
+        pin5v = 0;
+    }
+}
+
+void EaLcdBoardGPIO::setDisplayEnableSignal(bool enabled) { //P2.11 H=enabled
+    LPC_IOCON->P2_11 &= ~7; /* GPIO2[11]  @ P2.11 */
+    if (enabled) {
+        pinDE = 1;
+    } else {
+        pinDE = 0;
+    }
+}
+
+void EaLcdBoardGPIO::setBacklightContrast(uint32_t value) { //P2.1, set to 4.30 for now
+#if 0    
+    LPC_IOCON->P2_1 &= ~7; /* GPIO2[1]  @ P2.1 */
+  if (value > 50) {
+      pinContrast = 1;
+  } else {
+      pinContrast = 0;
+  }
+#else
+    uint32_t tmp = LPC_IOCON->P2_1;
+    tmp &= ~7;
+    tmp |= 1;
+    LPC_IOCON->P2_1 = tmp; /* PWM2[1]  @ P2.1 */
+    float f = value;
+    pinContrast = f/100.0f;
+#endif
+  
+//    if (value > 100) return;
+
+//    pca9532_setBlink0Duty(100-value);
+//    pca9532_setBlink0Period(0);
+//    pca9532_setBlink0Leds(LCDB_CTRL_BL_C);
+}
+
+
+

diff -r 000000000000 -r d1e4929f6956 EaLcdBoardGPIO.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EaLcdBoardGPIO.h	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,50 @@
+/*
+ *  Copyright 2013 Embedded Artists AB
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#ifndef EALCDBOARDGPIO_H
+#define EALCDBOARDGPIO_H
+
+#include "EaLcdBoard.h"
+
+/** An interface to Embedded Artists LCD Boards
+ *
+ */
+class EaLcdBoardGPIO : public EaLcdBoard {
+public:
+
+    EaLcdBoardGPIO(PinName sda, PinName scl);
+
+    void setBC(uint32_t val) { setBacklightContrast(val); };
+
+protected:
+    virtual void setWriteProtect(bool enable);
+    virtual void set3V3Signal(bool enabled);
+    virtual void set5VSignal(bool enabled);
+    virtual void setDisplayEnableSignal(bool enabled);
+    virtual void setBacklightContrast(uint32_t value);
+
+private:
+    //DigitalOut pinWP;
+    DigitalOut pin3v3;
+    DigitalOut pin5v;
+    DigitalOut pinDE;
+    //DigitalOut pinContrast;
+    PwmOut pinContrast;
+};
+
+#endif
+
+

diff -r 000000000000 -r d1e4929f6956 Graphics.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Graphics.cpp	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,241 @@
+
+#include "mbed.h"
+#include "Graphics.h"
+
+
+Graphics::Graphics(uint16_t *pFrmBuf, uint16_t dispWidth, uint16_t dispHeight)
+{
+	this->windowX = dispWidth;
+	this->windowY = dispHeight;
+	this->pFrmBuf = pFrmBuf;
+}
+
+void Graphics::setFrameBuffer( uint16_t *pFrmBuf )
+{
+	this->pFrmBuf = pFrmBuf;
+}
+
+int32_t Graphics::abs(int32_t v1) const
+{
+   if (v1 > 0)
+     return v1;
+
+  return -v1;
+}
+
+/***********************************************************************
+ *
+ * Function: swim_put_line_raw
+ *
+ * Purpose: Draw a line on the physical display
+ *
+ * Processing:
+ *     See function.
+ *
+ * Parameters:
+ *     win : Window identifier
+ *     x1  : Physical X position of X line start
+ *     y1  : Physical Y position of Y line start
+ *     x2  : Physical X position of X line end
+ *     y2  : Physical Y position of Y line end
+ *
+ * Outputs: None
+ *
+ * Returns: Nothing
+ *
+ * Notes: None
+ *
+ **********************************************************************/
+void Graphics::put_line(int32_t x1, int32_t y1, int32_t x2, int32_t y2, int16_t color)
+{
+    int32_t e2, sx, sy, dx, dy, err;
+    
+    /* calculate delta_x and delta_y */
+    dx = abs(x2 - x1);
+    dy = abs(y2 - y1);
+
+    /* set the direction for the step for both x and y, and
+       initialize the error */
+    if (x1 < x2)
+        sx = 1;
+    else
+        sx = -1;
+
+    if (y1 < y2)
+        sy = 1;
+    else
+        sy = -1;
+
+    err = dx - dy;
+   
+    while (1)
+    {
+        if ((x1 >= 0) && (x1 < this->windowX) && 
+            (y1 >= 0) && (y1 < this->windowY))
+            this->pFrmBuf[x1 + (this->windowX*y1)] = color;
+
+        if ((x1 == x2) && (y1 == y2))
+            return;
+
+        e2 = 2 * err;
+        if (e2 > -dy)
+        {
+            err -= dy;
+            x1 += sx;
+        }
+        if (e2 < dx)
+        {
+            err += dx;
+            y1 += sy;
+        }
+    }
+}
+
+/***********************************************************************
+ *
+ * Function: plot4points
+ *
+ * Purpose:
+ *
+ * Processing:
+ *     See function.
+ *
+ * Parameters:
+ *     win    : Window identifier
+ *     cx     :
+ *     cy     :
+ *     x      :
+ *     y      :
+ *     Filled :
+ *
+ * Outputs: None
+ *
+ * Returns: Nothing
+ *
+ * Notes: None
+ *
+ **********************************************************************/
+void Graphics::plot4points( int32_t cx, int32_t cy, int32_t x, int32_t y, int16_t color, int32_t Filled )
+   {
+   int16_t x0, x1, y0, y1;
+
+   y0 = cy + y;
+   y1 = cy - y;
+   if( Filled )
+      {
+      for( x0=cx - x; x0<=cx + x; x0++ )
+         {
+         if ((x0>=0) && (x0<this->windowX) && (y0>=0) && (y0<this->windowY))
+            this->pFrmBuf[x0 + (this->windowX*y0)] = color;
+         if ((x0>=0) && (x0<this->windowX) && (y1>=0) && (y1<this->windowY))
+            this->pFrmBuf[x0 + (this->windowX*y1)] = color;
+         }
+      }
+   else
+      {
+      x0 = cx + x;
+      x1 = cx - x;
+      if ((x0>=0) && (x0<this->windowX) && (y0>=0) && (y0<this->windowY))
+         this->pFrmBuf[x0 + (this->windowX*y0)] = color;
+      if ((x != 0) && 
+          (x1>=0) && (x1<this->windowX) && (y0>=0) && (y0<this->windowY))
+         this->pFrmBuf[x1 + (this->windowX*y0)] = color;
+      if ((y != 0) &&
+          (x0>=0) && (x0<this->windowX) && (y1>=0) && (y1<this->windowY))
+         this->pFrmBuf[x0 + (this->windowX*y1)] = color;
+      if ((x != 0 && y != 0) &&
+          (x1>=0) && (x1<this->windowX) && (y1>=0) && (y1<this->windowY))
+         this->pFrmBuf[x1 + (this->windowX*y1)] = color;
+      }
+   }
+
+/***********************************************************************
+ *
+ * Function: plot8points
+ *
+ * Purpose:
+ *
+ * Processing:
+ *     See function.
+ *
+ * Parameters:
+ *     win    : Window identifier
+ *     cx     :
+ *     cy     :
+ *     x      :
+ *     y      :
+ *     Filled :
+ *
+ * Outputs: None
+ *
+ * Returns: Nothing
+ *
+ * Notes: None
+ *
+ **********************************************************************/
+void Graphics::plot8points( int32_t cx, int32_t cy, int32_t x, int32_t y, int16_t color, int32_t Filled )
+   {
+   plot4points( cx, cy, x, y, color, Filled );
+   if (x != y)
+      plot4points( cx, cy, y, x, color, Filled );
+   }
+
+/***********************************************************************
+ *
+ * Function: swim_put_circle
+ *
+ * Purpose:
+ *
+ * Processing:
+ *     See function.
+ *
+ * Parameters:
+ *     win    : Window identifier
+ *     cx     :
+ *     cy     :
+ *     radius :
+ *     Filled :
+ *
+ * Outputs: None
+ *
+ * Returns: Nothing
+ *
+ * Notes: None
+ *
+ **********************************************************************/
+void Graphics::put_circle( int32_t cx, int32_t cy, int16_t color, int32_t radius, int32_t Filled )
+   {
+   int32_t Error = -radius;
+   int16_t x = radius;
+   int16_t y = 0;
+
+   while( x >= y )
+      {
+      plot8points( cx, cy, x, y, color, Filled );
+
+      Error += y;
+      ++y;
+      Error += y;
+
+      if( Error >= 0 )
+         {
+         --x;
+         Error -= x;
+         Error -= x;
+         }
+      }
+   }
+
+void Graphics::put_dot( int32_t cx, int32_t cy, int16_t color )
+{
+  int size = 1;
+  for (int y1 = cy - size; y1 <= (cy + size); y1++) {
+    for (int x1 = cx - size; x1 <= (cx + size); x1++) {
+      if ((x1 >= 0) && (x1 < this->windowX) && (y1 >= 0) && (y1 < this->windowY)) {
+          this->pFrmBuf[x1 + (this->windowX*y1)] = color;
+      }
+    }
+  }
+}
+
+

diff -r 000000000000 -r d1e4929f6956 Graphics.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Graphics.h	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,29 @@
+
+#ifndef GRAPHICS_H
+#define GRAPHICS_H
+
+class Graphics {
+public:
+
+	Graphics(uint16_t *pFrmBuf, uint16_t dispWidth, uint16_t dispHeight);
+
+	void setFrameBuffer( uint16_t *pFrmBuf );
+	void put_line(int32_t x1, int32_t y1, int32_t x2, int32_t y2, int16_t color);
+    void put_circle( int32_t cx, int32_t cy, int16_t color, int32_t radius, int32_t Filled );
+    void put_dot( int32_t cx, int32_t cy, int16_t color );
+
+protected:
+	uint16_t windowX;
+	uint16_t windowY;
+	uint16_t *pFrmBuf;
+	
+    int32_t abs(int32_t v1) const;
+    
+    virtual void plot4points( int32_t cx, int32_t cy, int32_t x, int32_t y, int16_t color, int32_t Filled );
+    void plot8points( int32_t cx, int32_t cy, int32_t x, int32_t y, int16_t color, int32_t Filled );
+    
+};
+
+#endif
+
+

diff -r 000000000000 -r d1e4929f6956 TestDisplay.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TestDisplay.cpp	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,216 @@
+/*
+ *  Copyright 2013 Embedded Artists AB
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+
+#include "mbed.h"
+#include "TestDisplay.h"
+#include "sdram.h"
+
+#include "WaveDemo.h"
+
+/******************************************************************************
+ * Defines and typedefs
+ *****************************************************************************/
+
+#define LCD_CONFIGURATION_43 \
+        40,                         /* horizontalBackPorch */ \
+        5,                          /* horizontalFrontPorch */ \
+        2,                          /* hsync */ \
+        480,                        /* width */ \
+        8,                          /* verticalBackPorch */ \
+        8,                          /* verticalFrontPorch */ \
+        2,                          /* vsync */ \
+        272,                        /* height */ \
+        false,                      /* invertOutputEnable */ \
+        false,                      /* invertPanelClock */ \
+        true,                       /* invertHsync */ \
+        true,                       /* invertVsync */ \
+        1,                          /* acBias */ \
+        LcdController::Bpp_16_565,  /* bpp */ \
+        9000000,                    /* optimalClock */ \
+        LcdController::Tft,         /* panelType */ \
+        false                       /* dualPanel */
+
+#define LCD_INIT_STRING_43  (char*)"v1,cd0,c50,cc0,c30,d100,c31,d100,cd1,d10,o,c51,cc100"
+
+#define LCD_CONFIGURATION_50 \
+        46,                         /* horizontalBackPorch */ \
+        20,                          /* horizontalFrontPorch */ \
+        2,                          /* hsync */ \
+        800,                        /* width */ \
+        23,                          /* verticalBackPorch */ \
+        10,                          /* verticalFrontPorch */ \
+        3,                          /* vsync */ \
+        480,                        /* height */ \
+        false,                      /* invertOutputEnable */ \
+        false,                      /* invertPanelClock */ \
+        true,                       /* invertHsync */ \
+        true,                       /* invertVsync */ \
+        1,                          /* acBias */ \
+        LcdController::Bpp_16_565,  /* bpp */ \
+        30000000,                   /* optimalClock */ \
+        LcdController::Tft,         /* panelType */ \
+        false                       /* dualPanel */
+
+#define LCD_INIT_STRING_50  (char*)"v1,cc0,c31,d50,o,d200,c51,cc100"
+
+#define MY_ABS(__a)  (((__a) < 0) ? -(__a) : (__a))
+
+/******************************************************************************
+ * Public Functions
+ *****************************************************************************/
+
+/*
+   Prerequisites:
+ 
+   - A display must be connected to the LPC4088 Experiment Base Board
+     with the FPC connector
+
+   - The touch controller uses the I2C bus so for this test to work 
+     jumpers JP8 and JP9 on the LPC4088 Experiment Base Board must 
+     both be in positions 1-2
+
+*/
+
+TestDisplay::TestDisplay(WhichDisplay which) : 
+    _initStr(NULL),
+    _lcdCfg(NULL),
+    _lcdBoard(P0_27, P0_28),
+    _touch(P0_27, P0_28, P2_25) {
+    
+    switch (which) {
+        case TFT_5:
+            _lcdCfg = new LcdController::Config(LCD_CONFIGURATION_50);
+            _initStr = LCD_INIT_STRING_50;
+            break;
+        case TFT_4_3:
+            _lcdCfg = new LcdController::Config(LCD_CONFIGURATION_43);
+            _initStr = LCD_INIT_STRING_43;
+            break;
+        default:
+            mbed_die();
+    }
+            
+    if (sdram_init() == 1) {
+        printf("Failed to initialize SDRAM\n");
+        _framebuffer = 0;
+    } else {
+        _framebuffer = (uint32_t) malloc(_lcdCfg->width * _lcdCfg->height * 2 * 3); // 2 is for 16 bit color, 3 is the number of buffers
+        if (_framebuffer != 0) {
+            memset((uint8_t*)_framebuffer, 0, _lcdCfg->width * _lcdCfg->height * 2 * 3);
+        }
+    }
+}
+
+TestDisplay::~TestDisplay() {
+    if (_framebuffer != 0) {
+        free((void*)_framebuffer);
+        _framebuffer = 0;
+    }
+}
+
+bool TestDisplay::runTest() {
+    do {
+        if (_framebuffer == 0) {
+            printf("Failed to allocate memory for framebuffer\n");
+            break;
+        }
+        
+        EaLcdBoard::Result result = _lcdBoard.open(_lcdCfg, _initStr);
+        if (result != EaLcdBoard::Ok) {
+            printf("Failed to open display, error %d\n", result);
+            break;
+        }
+
+        result = _lcdBoard.setFrameBuffer(_framebuffer);
+        if (result != EaLcdBoard::Ok) {
+            printf("Failed to set framebuffer, error %d\n", result);
+            break;
+        }
+        
+        WaveDemo waveDemo((uint8_t *)_framebuffer, _lcdCfg->width, _lcdCfg->height);
+        while (1) {
+            waveDemo.run(_lcdBoard, 750, 50);
+        }
+    } while(0);
+    
+    return false;
+}
+
+void TestDisplay::calibrate_drawMarker(Graphics &g, uint16_t x, uint16_t y, bool erase) {
+    uint16_t color = (erase ? 0x0000 : 0xffff);
+    g.put_line(x-15, y, x+15, y, color);
+    g.put_line(x, y-15, x, y+15, color);
+    g.put_circle(x, y, color, 10, false);
+}
+
+bool TestDisplay::calibrate_display() {
+    bool morePoints = true;
+    uint16_t x, y;
+    int point = 0;
+    Graphics g((uint16_t*)_framebuffer, _lcdCfg->width, _lcdCfg->height);
+    
+    do {
+        if (!_touch.init(_lcdCfg->width, _lcdCfg->height)) {
+            printf("Failed to initialize touch controller\n");
+            break;
+        }
+        if (!_touch.calibrateStart()) {
+            printf("Failed to start calibration\n");
+            break;
+        }  
+        while (morePoints) {
+            if (point++ > 0) {
+                // erase old location
+                calibrate_drawMarker(g, x, y, true);
+            }
+            if (!_touch.getNextCalibratePoint(&x, &y)) {
+                printf("Failed to get calibration point\n");
+                break;
+            }
+            calibrate_drawMarker(g, x, y, false);
+            if (!_touch.waitForCalibratePoint(&morePoints, 0)) {
+                printf("Failed to get user click\n");
+                break;
+            }
+        }
+        if (morePoints) {
+            // aborted calibration due to error(s)
+            break;
+        }
+
+        // erase old location
+        calibrate_drawMarker(g, x, y, true);
+
+        // allow user to draw for 5999 seconds
+        Timer t;
+        t.start();
+        TouchPanel::touchCoordinate_t tc;
+        while(t.read() < 6000) {
+            if (_touch.read(tc)) {
+                //printf("TC: x,y,z = {%5d, %5d, %5d}\n", tc.x, tc.y, tc.z);
+                if (tc.z) {
+                    g.put_dot(tc.x, tc.y, 0xffff);
+                }
+            }
+        }
+    } while(0);
+    
+    return !morePoints;
+}

diff -r 000000000000 -r d1e4929f6956 TestDisplay.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TestDisplay.h	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,63 @@
+/*
+ *  Copyright 2013 Embedded Artists AB
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#ifndef TESTDISPLAY_H
+#define TESTDISPLAY_H
+
+#include "AR1021I2C.h"
+#include "Graphics.h"
+#include "LcdController.h"
+#include "EaLcdBoardGPIO.h"
+
+/**
+ * Test the display connected with a FPC cable to the LPC4088 Experiment Base Board
+ * as well as the AR1021 touch sensor on the board.
+ */
+class TestDisplay {
+public:
+	enum WhichDisplay {
+		TFT_5,    // 5" display
+		TFT_4_3,  // 4.3" display
+	};
+
+    /**
+     * Create an interface to the display
+     */
+    TestDisplay(WhichDisplay which);
+    ~TestDisplay();
+
+    /**
+     * Test the display
+     *
+     * @return true if the test was successful; otherwise false
+     */
+	bool runTest();
+
+private:
+
+    void calibrate_drawMarker(Graphics &g, uint16_t x, uint16_t y, bool erase);
+    bool calibrate_display();
+
+	char* _initStr;
+    LcdController::Config* _lcdCfg;
+    EaLcdBoardGPIO _lcdBoard;
+    AR1021I2C _touch;
+
+    uint32_t _framebuffer;
+};
+
+#endif
+

diff -r 000000000000 -r d1e4929f6956 WaveDemo.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/WaveDemo.cpp	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,295 @@
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+
+#include "mbed.h"
+
+#include "LcdController.h"
+#include "EaLcdBoard.h"
+#include "WaveDemo.h"
+
+#include <math.h>
+
+/******************************************************************************
+ * Typedefs and defines
+ *****************************************************************************/
+
+#define PI2 6.283185307179586476925286766559
+
+/* Red color mask, 565 mode */
+#define REDMASK       0xF800
+/* Red shift value, 565 mode */
+#define REDSHIFT      11
+/* Green color mask, 565 mode */
+#define GREENMASK     0x07E0
+/* Green shift value, 565 mode */
+#define GREENSHIFT    5
+/* Blue color mask, 565 mode */
+#define BLUEMASK      0x001F
+/* Blue shift value, 565 mode */
+#define BLUESHIFT     0
+
+/* Number of colors in 565 mode */
+#define NUM_COLORS    65536
+/* Number of red colors in 565 mode */
+#define RED_COLORS    0x20
+/* Number of green colors in 565 mode */
+#define GREEN_COLORS  0x40
+/* Number of blue colors in 565 mode */
+#define BLUE_COLORS   0x20
+
+/******************************************************************************
+ * Local variables
+ *****************************************************************************/
+
+
+/******************************************************************************
+ * External variables
+ *****************************************************************************/
+
+
+/******************************************************************************
+ * Local functions
+ *****************************************************************************/
+
+uint16_t WaveDemo::fastsqrt(uint32_t n) const {
+ uint16_t c = 0x8000;
+ uint16_t g = 0x8000;
+ for(;;) {
+  if(g*g > n)
+   g ^= c;
+  c >>= 1;
+  if(c == 0)
+   return g;
+  g |= c;
+ }
+}
+
+void WaveDemo::matrix(int16_t xyz[3][N], uint8_t rgb[3][N]) {
+ static uint32_t t = 0;
+ uint16_t i;
+ int16_t x = -SCALE;
+ int16_t y = -SCALE;
+ uint16_t d;
+ uint16_t s;
+
+ for(i = 0; i < N; i++) {
+
+  xyz[0][i] = x;
+  xyz[1][i] = y;
+
+  d = fastsqrt(x * x + y * y);
+  s = sine[(t * 30) % SCALE] + SCALE;
+
+  xyz[2][i] = sine[(d + s) % SCALE] *
+              sine[(t * 10) % SCALE] / SCALE / 2;
+
+  rgb[0][i] = (cosi[xyz[2][i] + SCALE / 2] + SCALE) *
+              (RED_COLORS - 1) / SCALE / 2;
+
+  rgb[1][i] = (cosi[(xyz[2][i] + SCALE / 2 + 2 * SCALE / 3) % SCALE] + SCALE) *
+              (GREEN_COLORS - 1) / SCALE / 2;
+
+  rgb[2][i] = (cosi[(xyz[2][i] + SCALE / 2 + SCALE / 3) % SCALE] + SCALE) *
+              (BLUE_COLORS - 1) / SCALE / 2;
+
+  x += INCREMENT;
+  if(x >= SCALE) {
+   x = -SCALE;
+   y += INCREMENT;
+  }
+
+ }
+ t++;
+}
+
+void WaveDemo::rotate(int16_t xyz[3][N], uint8_t rgb[3][N],
+                   uint16_t angleX, uint16_t angleY, uint16_t angleZ) {
+ uint16_t i;
+ int16_t tmpX;
+ int16_t tmpY;
+ int16_t sinx = sine[angleX];
+ int16_t cosx = cosi[angleX];
+ int16_t siny = sine[angleY];
+ int16_t cosy = cosi[angleY];
+ int16_t sinz = sine[angleZ];
+ int16_t cosz = cosi[angleZ];
+
+ for(i = 0; i < N; i++) {
+  tmpX      = (xyz[0][i] * cosx - xyz[2][i] * sinx) / SCALE;
+  xyz[2][i] = (xyz[0][i] * sinx + xyz[2][i] * cosx) / SCALE;
+  xyz[0][i] = tmpX;
+
+  tmpY      = (xyz[1][i] * cosy - xyz[2][i] * siny) / SCALE;
+  xyz[2][i] = (xyz[1][i] * siny + xyz[2][i] * cosy) / SCALE;
+  xyz[1][i] = tmpY;
+
+  tmpX      = (xyz[0][i] * cosz - xyz[1][i] * sinz) / SCALE;
+  xyz[1][i] = (xyz[0][i] * sinz + xyz[1][i] * cosz) / SCALE;
+  xyz[0][i] = tmpX;
+ }
+}
+
+void WaveDemo::draw(int16_t xyz[3][N], uint8_t rgb[3][N]) {
+// static uint16_t oldProjX[N] = {0};
+// static uint16_t oldProjY[N] = {0};
+// static uint8_t oldDotSize[N] = {0};
+ uint16_t i;
+ uint16_t projX;
+ uint16_t projY;
+ uint16_t projZ;
+ uint16_t dotSize;
+ static uint8_t cnt=0;
+
+  if (cnt == 0)
+  {
+    cnt = 1;
+    pFrmBuf = pFrmBuf1;
+  }
+  else if (cnt == 1)
+  {
+    cnt = 2;
+    pFrmBuf = pFrmBuf2;
+  }
+  else
+  {
+    cnt = 0;
+    pFrmBuf = pFrmBuf3;
+  }
+  
+  graphics.setFrameBuffer(pFrmBuf);
+
+  memset((void*)(pFrmBuf), 0x00, windowX * windowY * 2);
+
+ for(i = 0; i < N; i++) {
+  projZ   = SCALE - (xyz[2][i] + SCALE) / 4; //4;
+  projX   = windowX / 2 + (xyz[0][i] * projZ / SCALE) / 40; //EA 25;
+  projY   = windowY / 2 + (xyz[1][i] * projZ / SCALE) / 40; //EA 25;
+  dotSize = 3 - (xyz[2][i] + SCALE) * 2 / SCALE;
+//EA  put_circle(oldProjX[i], oldProjY[i], 0, dotSize, 1);
+
+  if((projX > dotSize) &&
+     (projY > dotSize) &&
+     (projX < (windowX - dotSize)) &&
+     (projY < (windowY - dotSize))) {
+
+   graphics.put_circle(projX, projY, (rgb[0][i] << REDSHIFT) + (rgb[1][i] << GREENSHIFT) + (rgb[2][i] << BLUESHIFT), dotSize, 1);
+
+//   oldProjX[i] = projX;
+//   oldProjY[i] = projY;
+//   oldDotSize[i] = dotSize;
+  }
+ }
+}
+
+
+
+/******************************************************************************
+ * Public functions
+ *****************************************************************************/
+WaveDemo::WaveDemo(uint8_t *pFrameBuf, uint16_t dispWidth, uint16_t dispHeight) 
+    : graphics((uint16_t *)pFrameBuf, dispWidth, dispHeight)
+{
+    this->windowX = dispWidth;
+    this->windowY = dispHeight;
+    this->pFrmBuf  = (uint16_t *)pFrameBuf;
+    this->pFrmBuf1 = (uint16_t *)pFrameBuf;
+    this->pFrmBuf2 = (uint16_t *)((uint32_t)pFrameBuf + dispWidth*dispHeight*2);
+    this->pFrmBuf3 = (uint16_t *)((uint32_t)pFrameBuf + dispWidth*dispHeight*4);
+
+    for(uint16_t i = 0; i < SCALE; i++) {
+        sine[i] = (int)(sin(PI2 * i / SCALE) * SCALE);
+        cosi[i] = (int)(cos(PI2 * i / SCALE) * SCALE);
+    }
+}
+
+void WaveDemo::run(EaLcdBoardGPIO& lcdBoard, uint32_t loops, uint32_t delayMs)
+{
+  printf("WaveDemo, %d loops, %dms delay\n", loops, delayMs);
+  
+    int16_t angleX = 0;
+    int16_t angleY = 1000;
+    int16_t angleZ = 0;
+    
+    int16_t speedX = 0;
+    int16_t speedY = 0;
+    int16_t speedZ = 0;
+    
+    int16_t xyz[3][N];
+    uint8_t rgb[3][N];
+    
+    loops = 2*820;
+  for(int32_t n=0;n<loops;n++) {
+
+   matrix(xyz, rgb);
+
+   rotate(xyz, rgb, angleX, angleY, angleZ);
+
+   draw(xyz, rgb);
+  //update framebuffer
+  lcdBoard.setFrameBuffer((uint32_t)this->pFrmBuf);
+
+#if 0
+   if(joyState & JOYSTICK_RIGHT)
+    speedX -= SPEED;
+   else if(joyState & JOYSTICK_LEFT)
+    speedX += SPEED;
+   else if(joyState & JOYSTICK_UP)
+    speedY -= SPEED;
+   else if(joyState & JOYSTICK_DOWN)
+    speedY += SPEED;
+   else if(ledState & KEY1)
+    speedZ -= SPEED;
+   else if(ledState & KEY2)
+    speedZ += SPEED;
+   else if(ledState & KEY3) {
+    speedX = 0;
+    speedY = 0;
+    speedZ = 0;
+    angleX = 0;
+    angleY = 0;
+    angleZ = 0;
+   } else
+#endif
+    {
+    if(speedX > 0)
+     speedX -= SPEED;
+    else if(speedX < 0)
+     speedX += SPEED;
+
+    if(speedY > 0)
+     speedY -= SPEED;
+    else if(speedY < 0)
+     speedY += SPEED;
+
+    if(speedZ > 0)
+     speedZ -= SPEED;
+    else if(speedZ < 0)
+     speedZ += SPEED;
+   }
+
+   angleX += 0; //speedX;
+   angleY += 0; //speedY;
+   angleZ += 2; //speedZ;
+
+   if(angleX >= SCALE)
+    angleX -= SCALE;
+   else if(angleX < 0)
+    angleX += SCALE;
+
+   if(angleY >= SCALE)
+    angleY -= SCALE;
+   else if(angleY < 0)
+    angleY += SCALE;
+
+   if(angleZ >= SCALE)
+    angleZ -= SCALE;
+   else if(angleZ < 0)
+    angleZ += SCALE;
+   
+  }
+//wait_ms(delayMs);
+   wait_ms(1000);
+
+}
+

diff -r 000000000000 -r d1e4929f6956 WaveDemo.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/WaveDemo.h	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,63 @@
+
+#ifndef WAVEDEMO_H
+#define WAVEDEMO_H
+
+#include "Graphics.h"
+#include "GFXFb.h"
+
+#include "EaLcdBoardGPIO.h"
+
+class WaveDemo {
+public:
+
+    /** Set the address of the frame buffer to use.
+     *
+     *  It is the content of the frame buffer that is shown on the
+     *  display. All the drawing on the frame buffer can be done
+     *  'offline' and whenever it should be shown this function
+     *  can be called with the address of the offline frame buffer.
+     *
+     *  @param pFrameBuf  Pointer to the frame buffer, which must be
+     *                    3 times as big as the frame size (for tripple
+     *                    buffering).
+     *         dispWidth  The width of the display (in pixels).
+     *         dispHeight The height of the display (in pixels).
+     *         loops      Number of loops in the demo code.
+     *         delayMs    Delay in milliseconds between schreen updates.
+     *
+     *  @returns
+     *       none
+     */
+    WaveDemo(uint8_t *pFrameBuf, uint16_t dispWidth, uint16_t dispHeight);
+    
+    void run(EaLcdBoardGPIO& lcdBoard, uint32_t loops, uint32_t delayMs);
+
+private:
+
+    enum Constants {
+        N         = 1024, // Number of dots
+        SCALE     = 8192,
+        INCREMENT = 512,  // INCREMENT = SCALE / sqrt(N) * 2
+        SPEED     = 5
+    };
+
+    int32_t windowX;
+    int32_t windowY;
+    uint16_t *pFrmBuf;
+    uint16_t *pFrmBuf1;
+    uint16_t *pFrmBuf2;
+    uint16_t *pFrmBuf3;
+    
+    Graphics graphics;
+    
+    int16_t sine[SCALE];
+    int16_t cosi[SCALE];
+    
+    uint16_t fastsqrt(uint32_t n) const;
+    void matrix(int16_t xyz[3][N], uint8_t rgb[3][N]);
+    void rotate(int16_t xyz[3][N], uint8_t rgb[3][N], uint16_t angleX, uint16_t angleY, uint16_t angleZ);
+    void draw(int16_t xyz[3][N], uint8_t rgb[3][N]);
+};
+
+#endif /* WAVEDEMO_H */
+

diff -r 000000000000 -r d1e4929f6956 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,46 @@
+/******************************************************************************
+ * Includes
+ *****************************************************************************/
+#include "mbed.h"
+
+#include "TestDisplay.h"
+
+/******************************************************************************
+ * Typedefs and defines
+ *****************************************************************************/
+
+
+/******************************************************************************
+ * Local variables
+ *****************************************************************************/
+
+DigitalOut myled(LED1);
+
+/******************************************************************************
+ * Local functions
+ *****************************************************************************/
+
+/*
+ * Test program for the 4.3" and 5" displays. This test is supposed to run
+ * on a LPC4088QSB board on an LPC4088 Experiment Base Board.
+ */
+
+
+int main() {
+    printf("\n"
+           "---\n"
+           "Display Demo Program for 4.3 and 5 inch display on the LPC4088 Experiment Base Board\n"
+           "Build Date: " __DATE__ " at " __TIME__ "\n"
+           "\n");
+
+    //TestDisplay display(TestDisplay::TFT_4_3);
+    TestDisplay display(TestDisplay::TFT_5);
+    display.runTest();
+    
+    while(1) {
+        myled = 1;
+        wait(0.2);
+        myled = 0;
+        wait(0.2);
+    }
+}

diff -r 000000000000 -r d1e4929f6956 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Oct 03 13:37:30 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/552587b429a1
\ No newline at end of file