Modified version of the DmTftLibrary, optimized for the LPC4088 Experiment Base Board

Dependents:   lpc4088_ebb_dm_calc lpc4088_ebb_dm_bubbles

Fork of DmTftLibrary by Display Module

Revision:
0:d6ff5fa503e8
Child:
4:92d019216e28
diff -r 000000000000 -r d6ff5fa503e8 DmTftS6D0164.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/DmTftS6D0164.cpp	Tue May 13 09:31:24 2014 +0000
@@ -0,0 +1,195 @@
+/**********************************************************************************************
+ Copyright (c) 2014 DisplayModule. All rights reserved.
+
+ Redistribution and use of this source code, part of this source code or any compiled binary
+ based on this source code is permitted as long as the above copyright notice and following
+ disclaimer is retained.
+
+ DISCLAIMER:
+ THIS SOFTWARE IS SUPPLIED "AS IS" WITHOUT ANY WARRANTIES AND SUPPORT. DISPLAYMODULE ASSUMES
+ NO RESPONSIBILITY OR LIABILITY FOR THE USE OF THE SOFTWARE.
+ ********************************************************************************************/
+
+#include "DmTftS6D0164.h"
+
+DmTftS6D0164::DmTftS6D0164(uint8_t wr, uint8_t cs, uint8_t dc, uint8_t rst) : DmTftBase(176, 220) {
+  _wr = wr;
+  _cs = cs;
+  _dc = dc;
+  _rst = rst;
+}
+
+DmTftS6D0164::~DmTftS6D0164() {
+#if defined (DM_TOOLCHAIN_MBED)
+  delete _pinRST;
+  delete _pinCS;
+  delete _pinWR;
+  delete _pinDC;
+  delete _virtualPortD;
+  _pinRST = NULL;
+  _pinCS = NULL;
+  _pinWR = NULL;
+  _pinDC = NULL;
+  _virtualPortD = NULL;
+#endif
+}
+
+void DmTftS6D0164::writeBus(uint8_t data) {
+#if defined (DM_TOOLCHAIN_ARDUINO)
+  PORTD = data;
+#elif defined (DM_TOOLCHAIN_MBED)
+  *_virtualPortD = data;
+#endif
+  pulse_low(_pinWR, _bitmaskWR);
+}
+
+void DmTftS6D0164::sendCommand(uint8_t index) {
+  cbi(_pinDC, _bitmaskDC);
+  writeBus(index);
+}
+
+void DmTftS6D0164::sendData(uint16_t data) {
+  sbi(_pinDC, _bitmaskDC);
+  writeBus(data>>8);
+  writeBus(data);
+}
+
+void DmTftS6D0164::setAddress(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
+  sendCommand(0x37); // Set Column
+  sendData(x0);
+  sendCommand(0x36);
+  sendData(x1);
+
+
+  sendCommand(0x39);  // Set Page
+  sendData(y0);
+  sendCommand(0x38);
+  sendData(y1);
+
+  sendCommand(0x20);
+  sendData(x0);
+  sendCommand(0x21);
+  sendData(y0);
+  sendCommand(0x22);
+}
+
+void DmTftS6D0164::init(void) {
+  setTextColor(BLACK, WHITE);
+#if defined (DM_TOOLCHAIN_ARDUINO)
+/**************************************
+      DM-DmTftS6D016422-102     Arduino UNO             NUM
+
+      RST                       A2                      16
+      CS                        A3                      17
+      WR                        A4                      18
+      RS                        A5                      19
+
+      DB8                       0                       0
+      DB9                       1                       1
+      DB10                      2                       2
+      DB11                      3                       3
+      DB12                      4                       4
+      DB13                      5                       5
+      DB14                      6                       6
+      DB15                      7                       7
+
+***************************************/
+  DDRD = DDRD | B11111111;  // SET PORT D AS OUTPUT
+
+  _pinRST = portOutputRegister(digitalPinToPort(_rst));
+  _bitmaskRST = digitalPinToBitMask(_rst);
+  _pinCS = portOutputRegister(digitalPinToPort(_cs));
+  _bitmaskCS = digitalPinToBitMask(_cs);
+  _pinWR = portOutputRegister(digitalPinToPort(_wr));
+  _bitmaskWR = digitalPinToBitMask(_wr);
+  _pinDC = portOutputRegister(digitalPinToPort(_dc));
+  _bitmaskDC = digitalPinToBitMask(_dc);
+
+  pinMode(_rst, OUTPUT);
+  pinMode(_cs, OUTPUT);
+  pinMode(_wr, OUTPUT);
+  pinMode(_dc,OUTPUT);
+#elif defined (DM_TOOLCHAIN_MBED)
+  _pinRST = new DigitalOut((PinName)_rst);
+  _pinCS = new DigitalOut((PinName)_cs);
+  _pinWR = new DigitalOut((PinName)_wr);
+  _pinDC = new DigitalOut((PinName)_dc);
+  #ifdef LPC15XX_H
+    _virtualPortD = new BusOut(D0, D1, D2, D3, D4, P0_11, D6, D7);
+  #else
+    _virtualPortD = new BusOut(D0, D1, D2, D3, D4, D5, D6, D7);
+  #endif
+#endif
+
+  sbi(_pinRST, _bitmaskRST);
+  delay(5);
+  cbi(_pinRST, _bitmaskRST);
+  delay(15);
+  sbi(_pinRST, _bitmaskRST);
+  sbi(_pinCS, _bitmaskCS);
+  sbi(_pinWR, _bitmaskWR);
+  delay(15);
+  cbi(_pinCS, _bitmaskCS);
+
+  // Power up sequence
+  sendCommand(0x11); sendData(0x001A);            // S6D0164 INIT
+  sendCommand(0x12); sendData(0x3121);
+  sendCommand(0x13); sendData(0x006C);
+  sendCommand(0x14); sendData(0x4249);
+  sendCommand(0x10); sendData(0x0800);
+  delay(10);
+  sendCommand(0x11); sendData(0x011A);
+  delay(10);
+  sendCommand(0x11); sendData(0x031A);
+  delay(10);
+  sendCommand(0x11); sendData(0x071A);
+  delay(10);
+  sendCommand(0x11); sendData(0x0F1A);
+  delay(20);
+  sendCommand(0x11); sendData(0x0F3A);
+  delay(30);
+  // Initialization set sequence
+  sendCommand(0x01); sendData(0x011C);
+  sendCommand(0x02); sendData(0x0100);
+  sendCommand(0x03); sendData(0x1030);
+  sendCommand(0x07); sendData(0x0000);
+  sendCommand(0x08); sendData(0x0808);
+  sendCommand(0x0B); sendData(0x1100);
+  sendCommand(0x0C); sendData(0x0000);
+  sendCommand(0x0F); sendData(0x1401);
+  sendCommand(0x15); sendData(0x0000);
+  sendCommand(0x20); sendData(0x0000);
+  sendCommand(0x21); sendData(0x0000);
+
+  sendCommand(0x38); sendData(0x00DB);
+  sendCommand(0x39); sendData(0x0000);
+  sendCommand(0x50); sendData(0x0001);
+  sendCommand(0x51); sendData(0x020B);
+  sendCommand(0x52); sendData(0x0805);
+  sendCommand(0x53); sendData(0x0404);
+  sendCommand(0x54); sendData(0x0C0C);
+  sendCommand(0x55); sendData(0x000C);
+  sendCommand(0x56); sendData(0x0101);
+  sendCommand(0x57); sendData(0x0400);
+  sendCommand(0x58); sendData(0x1108);
+  sendCommand(0x59); sendData(0x050C);
+  sendCommand(0x36); sendData(0x00AF);
+  sendCommand(0x37); sendData(0x0000);
+  sendCommand(0x38); sendData(0x00DB);
+  sendCommand(0x39); sendData(0x0000);
+  sendCommand(0x0F); sendData(0x0B01);
+  sendCommand(0x07); sendData(0x0016);
+  delay(2);
+  sendCommand(0x07); sendData(0x0017);
+  sendCommand(0x22);
+  delay(10);
+  sbi(_pinCS, _bitmaskCS);
+
+  clearScreen();
+}
+
+/*********************************************************************************************************
+  END FILE
+*********************************************************************************************************/
+
+