Modified version of the DmTftLibrary, optimized for the LPC4088 Experiment Base Board
Dependents: lpc4088_ebb_dm_calc lpc4088_ebb_dm_bubbles
Fork of DmTftLibrary by
DmTftS6D0164.cpp
- Committer:
- displaymodule
- Date:
- 2014-05-13
- Revision:
- 0:d6ff5fa503e8
- Child:
- 4:92d019216e28
File content as of revision 0:d6ff5fa503e8:
/********************************************************************************************** Copyright (c) 2014 DisplayModule. All rights reserved. Redistribution and use of this source code, part of this source code or any compiled binary based on this source code is permitted as long as the above copyright notice and following disclaimer is retained. DISCLAIMER: THIS SOFTWARE IS SUPPLIED "AS IS" WITHOUT ANY WARRANTIES AND SUPPORT. DISPLAYMODULE ASSUMES NO RESPONSIBILITY OR LIABILITY FOR THE USE OF THE SOFTWARE. ********************************************************************************************/ #include "DmTftS6D0164.h" DmTftS6D0164::DmTftS6D0164(uint8_t wr, uint8_t cs, uint8_t dc, uint8_t rst) : DmTftBase(176, 220) { _wr = wr; _cs = cs; _dc = dc; _rst = rst; } DmTftS6D0164::~DmTftS6D0164() { #if defined (DM_TOOLCHAIN_MBED) delete _pinRST; delete _pinCS; delete _pinWR; delete _pinDC; delete _virtualPortD; _pinRST = NULL; _pinCS = NULL; _pinWR = NULL; _pinDC = NULL; _virtualPortD = NULL; #endif } void DmTftS6D0164::writeBus(uint8_t data) { #if defined (DM_TOOLCHAIN_ARDUINO) PORTD = data; #elif defined (DM_TOOLCHAIN_MBED) *_virtualPortD = data; #endif pulse_low(_pinWR, _bitmaskWR); } void DmTftS6D0164::sendCommand(uint8_t index) { cbi(_pinDC, _bitmaskDC); writeBus(index); } void DmTftS6D0164::sendData(uint16_t data) { sbi(_pinDC, _bitmaskDC); writeBus(data>>8); writeBus(data); } void DmTftS6D0164::setAddress(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) { sendCommand(0x37); // Set Column sendData(x0); sendCommand(0x36); sendData(x1); sendCommand(0x39); // Set Page sendData(y0); sendCommand(0x38); sendData(y1); sendCommand(0x20); sendData(x0); sendCommand(0x21); sendData(y0); sendCommand(0x22); } void DmTftS6D0164::init(void) { setTextColor(BLACK, WHITE); #if defined (DM_TOOLCHAIN_ARDUINO) /************************************** DM-DmTftS6D016422-102 Arduino UNO NUM RST A2 16 CS A3 17 WR A4 18 RS A5 19 DB8 0 0 DB9 1 1 DB10 2 2 DB11 3 3 DB12 4 4 DB13 5 5 DB14 6 6 DB15 7 7 ***************************************/ DDRD = DDRD | B11111111; // SET PORT D AS OUTPUT _pinRST = portOutputRegister(digitalPinToPort(_rst)); _bitmaskRST = digitalPinToBitMask(_rst); _pinCS = portOutputRegister(digitalPinToPort(_cs)); _bitmaskCS = digitalPinToBitMask(_cs); _pinWR = portOutputRegister(digitalPinToPort(_wr)); _bitmaskWR = digitalPinToBitMask(_wr); _pinDC = portOutputRegister(digitalPinToPort(_dc)); _bitmaskDC = digitalPinToBitMask(_dc); pinMode(_rst, OUTPUT); pinMode(_cs, OUTPUT); pinMode(_wr, OUTPUT); pinMode(_dc,OUTPUT); #elif defined (DM_TOOLCHAIN_MBED) _pinRST = new DigitalOut((PinName)_rst); _pinCS = new DigitalOut((PinName)_cs); _pinWR = new DigitalOut((PinName)_wr); _pinDC = new DigitalOut((PinName)_dc); #ifdef LPC15XX_H _virtualPortD = new BusOut(D0, D1, D2, D3, D4, P0_11, D6, D7); #else _virtualPortD = new BusOut(D0, D1, D2, D3, D4, D5, D6, D7); #endif #endif sbi(_pinRST, _bitmaskRST); delay(5); cbi(_pinRST, _bitmaskRST); delay(15); sbi(_pinRST, _bitmaskRST); sbi(_pinCS, _bitmaskCS); sbi(_pinWR, _bitmaskWR); delay(15); cbi(_pinCS, _bitmaskCS); // Power up sequence sendCommand(0x11); sendData(0x001A); // S6D0164 INIT sendCommand(0x12); sendData(0x3121); sendCommand(0x13); sendData(0x006C); sendCommand(0x14); sendData(0x4249); sendCommand(0x10); sendData(0x0800); delay(10); sendCommand(0x11); sendData(0x011A); delay(10); sendCommand(0x11); sendData(0x031A); delay(10); sendCommand(0x11); sendData(0x071A); delay(10); sendCommand(0x11); sendData(0x0F1A); delay(20); sendCommand(0x11); sendData(0x0F3A); delay(30); // Initialization set sequence sendCommand(0x01); sendData(0x011C); sendCommand(0x02); sendData(0x0100); sendCommand(0x03); sendData(0x1030); sendCommand(0x07); sendData(0x0000); sendCommand(0x08); sendData(0x0808); sendCommand(0x0B); sendData(0x1100); sendCommand(0x0C); sendData(0x0000); sendCommand(0x0F); sendData(0x1401); sendCommand(0x15); sendData(0x0000); sendCommand(0x20); sendData(0x0000); sendCommand(0x21); sendData(0x0000); sendCommand(0x38); sendData(0x00DB); sendCommand(0x39); sendData(0x0000); sendCommand(0x50); sendData(0x0001); sendCommand(0x51); sendData(0x020B); sendCommand(0x52); sendData(0x0805); sendCommand(0x53); sendData(0x0404); sendCommand(0x54); sendData(0x0C0C); sendCommand(0x55); sendData(0x000C); sendCommand(0x56); sendData(0x0101); sendCommand(0x57); sendData(0x0400); sendCommand(0x58); sendData(0x1108); sendCommand(0x59); sendData(0x050C); sendCommand(0x36); sendData(0x00AF); sendCommand(0x37); sendData(0x0000); sendCommand(0x38); sendData(0x00DB); sendCommand(0x39); sendData(0x0000); sendCommand(0x0F); sendData(0x0B01); sendCommand(0x07); sendData(0x0016); delay(2); sendCommand(0x07); sendData(0x0017); sendCommand(0x22); delay(10); sbi(_pinCS, _bitmaskCS); clearScreen(); } /********************************************************************************************************* END FILE *********************************************************************************************************/