mbed os with nrf51 internal bandgap enabled to read battery level
Dependents: BLE_file_test BLE_Blink ExternalEncoder
targets/TARGET_NORDIC/TARGET_NRF5/gpio_api.c
- Committer:
- elessair
- Date:
- 2016-10-23
- Revision:
- 0:f269e3021894
File content as of revision 0:f269e3021894:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed_assert.h" #include "gpio_api.h" #include "gpio_irq_api.h" #include "pinmap.h" #include "nrf_drv_gpiote.h" #if defined(TARGET_MCU_NRF51822) #define GPIO_PIN_COUNT 31 #else #define GPIO_PIN_COUNT 32 #endif typedef struct { bool used_as_gpio : 1; PinDirection direction : 1; bool init_high : 1; PinMode pull : 2; bool used_as_irq : 1; bool irq_fall : 1; bool irq_rise : 1; } gpio_cfg_t; uint32_t m_gpio_initialized; gpio_cfg_t m_gpio_cfg[GPIO_PIN_COUNT]; /*********** GPIO IRQ ***********/ static gpio_irq_handler m_irq_handler; static uint32_t m_channel_ids[GPIO_PIN_COUNT] = {0}; uint32_t m_gpio_irq_enabled; static void gpiote_irq_handler(nrf_drv_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { nrf_gpio_pin_sense_t sense = nrf_gpio_pin_sense_get(pin); gpio_irq_event event = (sense == NRF_GPIO_PIN_SENSE_LOW) ? IRQ_RISE : IRQ_FALL; if (m_gpio_irq_enabled & (1UL << pin)) { if (((event == IRQ_RISE) && m_gpio_cfg[pin].irq_rise) || ((event == IRQ_FALL) && m_gpio_cfg[pin].irq_fall)) { m_irq_handler(m_channel_ids[pin], event); } } } void gpio_init(gpio_t *obj, PinName pin) { obj->pin = pin; if (pin == (PinName)NC) { return; } MBED_ASSERT((uint32_t)pin < GPIO_PIN_COUNT); (void) nrf_drv_gpiote_init(); m_gpio_cfg[obj->pin].used_as_gpio = true; } int gpio_read(gpio_t *obj) { MBED_ASSERT(obj->pin != (PinName)NC); if (m_gpio_cfg[obj->pin].direction == PIN_OUTPUT) { return ((NRF_GPIO->OUTSET & (1UL << obj->pin)) ? 1 : 0); } else { return nrf_gpio_pin_read(obj->pin); } } static void gpio_apply_config(uint8_t pin) { if (m_gpio_initialized & (1UL << pin)) { if ((m_gpio_cfg[pin].direction == PIN_OUTPUT) && (!m_gpio_cfg[pin].used_as_irq)) { nrf_drv_gpiote_out_uninit(pin); } else { nrf_drv_gpiote_in_uninit(pin); } } if (m_gpio_cfg[pin].used_as_gpio || m_gpio_cfg[pin].used_as_irq) { if ((m_gpio_cfg[pin].direction == PIN_INPUT) || (m_gpio_cfg[pin].used_as_irq)) { //Configure as input. nrf_drv_gpiote_in_config_t cfg; cfg.hi_accuracy = false; cfg.is_watcher = false; cfg.sense = NRF_GPIOTE_POLARITY_TOGGLE; if (m_gpio_cfg[pin].used_as_irq) { cfg.pull = NRF_GPIO_PIN_PULLUP; nrf_drv_gpiote_in_init(pin, &cfg, gpiote_irq_handler); if ((m_gpio_irq_enabled & (1 << pin)) && (m_gpio_cfg[pin].irq_rise || m_gpio_cfg[pin].irq_fall)) { nrf_drv_gpiote_in_event_enable(pin, true); } } else { switch(m_gpio_cfg[pin].pull) { case PullUp: cfg.pull = NRF_GPIO_PIN_PULLUP; break; case PullDown: cfg.pull = NRF_GPIO_PIN_PULLDOWN; break; default: cfg.pull = NRF_GPIO_PIN_NOPULL; break; } nrf_drv_gpiote_in_init(pin, &cfg, NULL); } } else { // Configure as output. nrf_drv_gpiote_out_config_t cfg = GPIOTE_CONFIG_OUT_SIMPLE(m_gpio_cfg[pin].init_high); nrf_drv_gpiote_out_init(pin, &cfg); } m_gpio_initialized |= (1UL << pin); } else { m_gpio_initialized &= ~(1UL << pin); } } void gpio_mode(gpio_t *obj, PinMode mode) { MBED_ASSERT(obj->pin <= GPIO_PIN_COUNT); m_gpio_cfg[obj->pin].pull = mode; gpio_apply_config(obj->pin); } void gpio_dir(gpio_t *obj, PinDirection direction) { MBED_ASSERT(obj->pin <= GPIO_PIN_COUNT); m_gpio_cfg[obj->pin].direction = direction; gpio_apply_config(obj->pin); } /*********** GPIO IRQ ***********/ int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { if (pin == NC) { return -1; } MBED_ASSERT((uint32_t)pin < GPIO_PIN_COUNT); (void) nrf_drv_gpiote_init(); m_gpio_cfg[pin].used_as_irq = true; m_channel_ids[pin] = id; obj->ch = pin; m_irq_handler = handler; m_channel_ids[pin] = id; gpio_apply_config(pin); return 1; } void gpio_irq_free(gpio_irq_t *obj) { nrf_drv_gpiote_in_uninit(obj->ch); m_gpio_cfg[obj->ch].used_as_irq = false; m_channel_ids[obj->ch] = 0; gpio_apply_config(obj->ch); } void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { gpio_cfg_t* cfg = &m_gpio_cfg[obj->ch]; bool irq_enabled_before = (m_gpio_irq_enabled & (1 << obj->ch)) && (cfg->irq_rise || cfg->irq_fall); if (event == IRQ_RISE) { cfg->irq_rise = enable ? true : false; } else if (event == IRQ_FALL) { cfg->irq_fall = enable ? true : false; } bool irq_enabled_after = cfg->irq_rise || cfg->irq_fall; if (irq_enabled_before != irq_enabled_after) { if (irq_enabled_after) { gpio_irq_enable(obj); } else { gpio_irq_disable(obj); } } } void gpio_irq_enable(gpio_irq_t *obj) { m_gpio_irq_enabled |= (1 << obj->ch); if (m_gpio_cfg[obj->ch].irq_rise || m_gpio_cfg[obj->ch].irq_fall) { nrf_drv_gpiote_in_event_enable(obj->ch, true); } } void gpio_irq_disable(gpio_irq_t *obj) { m_gpio_irq_enabled &= ~(1 << obj->ch); nrf_drv_gpiote_in_event_disable(obj->ch); }