Hardware Abstraction Layer, permitting any LoRa application to use any LoRa radio chip
Dependents: alarm_slave alarm_master lora_p2p lorawan1v1 ... more
radio chip selection
Radio chip driver is not included, allowing choice of radio device.
If you're using SX1272 or SX1276, then import sx127x driver into your program.
if you're using SX1261 or SX1262, then import sx126x driver into your program.
if you're using SX1280, then import sx1280 driver into your program.
if you're using LR1110, then import LR1110 driver into your program.
If you're using NAmote72 or Murata discovery, then you must import only sx127x driver.
If you're using Type1SJ select target DISCO_L072CZ_LRWAN1
and import sx126x driver into your program.
Pin assigned to arduino LoRa radio shield form-factor
- SX1272 shield.
- SX1276 shield.
- SX126x kit with color touch screen, or sx126x radio-only shield.
- Exceptions with their own pin assignments: NAMote-72 and Murata discovery board.
- TODO: pin assign XDOT.
TARGET_MOTE_L152RC/radio_mote.cpp@5:ab124d3842a8, 2018-11-25 (annotated)
- Committer:
- Wayne Roberts
- Date:
- Sun Nov 25 17:12:03 2018 -0800
- Revision:
- 5:ab124d3842a8
- Parent:
- 0:9c052ff8dd6a
add PA disable option
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wayne Roberts |
0:9c052ff8dd6a | 1 | #include "radio.h" |
Wayne Roberts |
0:9c052ff8dd6a | 2 | |
Wayne Roberts |
0:9c052ff8dd6a | 3 | #define RADIO_RESET PC_2 //NorAm_Mote Reset_sx |
Wayne Roberts |
0:9c052ff8dd6a | 4 | #define RADIO_MOSI PB_15 //NorAm_Mote SPI2 Mosi |
Wayne Roberts |
0:9c052ff8dd6a | 5 | #define RADIO_MISO PB_14 //NorAm_Mote SPI2 Miso |
Wayne Roberts |
0:9c052ff8dd6a | 6 | #define RADIO_SCLK PB_13 //NorAm_Mote SPI2 Clk |
Wayne Roberts |
0:9c052ff8dd6a | 7 | #define RADIO_NSS PB_12 //NorAm_Mote SPI2 Nss |
Wayne Roberts |
0:9c052ff8dd6a | 8 | |
Wayne Roberts |
0:9c052ff8dd6a | 9 | #define RADIO_DIO_0 PC_6 //NorAm_Mote DIO0 |
Wayne Roberts |
0:9c052ff8dd6a | 10 | #define RADIO_DIO_1 PC_10 //NorAm_Mote DIO1 |
Wayne Roberts |
0:9c052ff8dd6a | 11 | #define RADIO_DIO_2 PC_8 //NorAm_Mote DIO2 |
Wayne Roberts |
0:9c052ff8dd6a | 12 | #define RADIO_DIO_3 PB_4 //NorAm_Mote DIO3 |
Wayne Roberts |
0:9c052ff8dd6a | 13 | #define RADIO_DIO_4 PB_5 //NorAm_Mote DIO4 |
Wayne Roberts |
0:9c052ff8dd6a | 14 | #define RADIO_DIO_5 PB_6 //NorAm_Mote DIO5 |
Wayne Roberts |
0:9c052ff8dd6a | 15 | |
Wayne Roberts |
0:9c052ff8dd6a | 16 | #define RFSW1 PC_4 //NorAm_Mote RFSwitch_CNTR_1 |
Wayne Roberts |
0:9c052ff8dd6a | 17 | #define RFSW2 PC_13 //NorAm_Mote RFSwitch_CNTR_2 |
Wayne Roberts |
0:9c052ff8dd6a | 18 | |
Wayne Roberts |
0:9c052ff8dd6a | 19 | // txpow: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 |
Wayne Roberts |
0:9c052ff8dd6a | 20 | const uint8_t PaBTable[20] = { 0, 0, 0, 0, 0, 1, 2, 3, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 14, 15 }; |
Wayne Roberts |
0:9c052ff8dd6a | 21 | |
Wayne Roberts |
0:9c052ff8dd6a | 22 | // txpow: 20 21 22 23 24 25 26 27 28 29 30 |
Wayne Roberts |
0:9c052ff8dd6a | 23 | const uint8_t RfoTable[11] = { 1, 1, 1, 2, 2, 3, 4, 5, 6, 8, 9 }; |
Wayne Roberts |
0:9c052ff8dd6a | 24 | |
Wayne Roberts |
5:ab124d3842a8 | 25 | #include "SPIu.h" |
Wayne Roberts |
5:ab124d3842a8 | 26 | SPIu spi(RADIO_MOSI, RADIO_MISO, RADIO_SCLK); // mosi, miso, sclk |
Wayne Roberts |
0:9c052ff8dd6a | 27 | // dio0, dio1, nss, spi, rst |
Wayne Roberts |
0:9c052ff8dd6a | 28 | SX127x Radio::radio(RADIO_DIO_0, RADIO_DIO_1, RADIO_NSS, spi, RADIO_RESET); // sx1276 arduino shield |
Wayne Roberts |
0:9c052ff8dd6a | 29 | SX127x_lora Radio::lora(radio); |
Wayne Roberts |
0:9c052ff8dd6a | 30 | SX127x_fsk Radio::fsk(radio); |
Wayne Roberts |
0:9c052ff8dd6a | 31 | |
Wayne Roberts |
0:9c052ff8dd6a | 32 | DigitalOut rfsw1(RFSW1); |
Wayne Roberts |
0:9c052ff8dd6a | 33 | DigitalOut rfsw2(RFSW2); |
Wayne Roberts |
0:9c052ff8dd6a | 34 | |
Wayne Roberts |
0:9c052ff8dd6a | 35 | InterruptIn Radio::dio0(RADIO_DIO_0); |
Wayne Roberts |
0:9c052ff8dd6a | 36 | InterruptIn Radio::dio1(RADIO_DIO_1); |
Wayne Roberts |
0:9c052ff8dd6a | 37 | |
Wayne Roberts |
0:9c052ff8dd6a | 38 | DigitalOut red(LED1); |
Wayne Roberts |
0:9c052ff8dd6a | 39 | DigitalOut yellow(LED3); |
Wayne Roberts |
0:9c052ff8dd6a | 40 | #define LED_OFF 1 |
Wayne Roberts |
0:9c052ff8dd6a | 41 | #define LED_ON 0 |
Wayne Roberts |
0:9c052ff8dd6a | 42 | |
Wayne Roberts |
0:9c052ff8dd6a | 43 | void Radio::rfsw_callback() |
Wayne Roberts |
0:9c052ff8dd6a | 44 | { |
Wayne Roberts |
0:9c052ff8dd6a | 45 | if (radio.RegOpMode.bits.Mode == RF_OPMODE_TRANSMITTER) { // start of transmission |
Wayne Roberts |
0:9c052ff8dd6a | 46 | red = LED_ON; |
Wayne Roberts |
0:9c052ff8dd6a | 47 | yellow = LED_OFF; |
Wayne Roberts |
0:9c052ff8dd6a | 48 | if (radio.HF) { |
Wayne Roberts |
0:9c052ff8dd6a | 49 | if (radio.RegPaConfig.bits.PaSelect) { // if PA_BOOST |
Wayne Roberts |
0:9c052ff8dd6a | 50 | rfsw2 = 0; |
Wayne Roberts |
0:9c052ff8dd6a | 51 | rfsw1 = 1; |
Wayne Roberts |
0:9c052ff8dd6a | 52 | } else { // RFO to power amp |
Wayne Roberts |
0:9c052ff8dd6a | 53 | rfsw2 = 1; |
Wayne Roberts |
0:9c052ff8dd6a | 54 | rfsw1 = 0; |
Wayne Roberts |
0:9c052ff8dd6a | 55 | } |
Wayne Roberts |
0:9c052ff8dd6a | 56 | } else { |
Wayne Roberts |
0:9c052ff8dd6a | 57 | // todo: sx1276 |
Wayne Roberts |
0:9c052ff8dd6a | 58 | } |
Wayne Roberts |
0:9c052ff8dd6a | 59 | } else if (radio.RegOpMode.bits.Mode == RF_OPMODE_RECEIVER || radio.RegOpMode.bits.Mode == RF_OPMODE_RECEIVER_SINGLE || radio.RegOpMode.bits.Mode == RF_OPMODE_CAD) { // start of reception |
Wayne Roberts |
0:9c052ff8dd6a | 60 | red = LED_OFF; |
Wayne Roberts |
0:9c052ff8dd6a | 61 | yellow = LED_ON; |
Wayne Roberts |
0:9c052ff8dd6a | 62 | if (radio.HF) { |
Wayne Roberts |
0:9c052ff8dd6a | 63 | rfsw2 = 1; |
Wayne Roberts |
0:9c052ff8dd6a | 64 | rfsw1 = 1; |
Wayne Roberts |
0:9c052ff8dd6a | 65 | } else { |
Wayne Roberts |
0:9c052ff8dd6a | 66 | // todo: sx1276 |
Wayne Roberts |
0:9c052ff8dd6a | 67 | } |
Wayne Roberts |
0:9c052ff8dd6a | 68 | } else { // RF switch shutdown |
Wayne Roberts |
0:9c052ff8dd6a | 69 | yellow = LED_OFF; |
Wayne Roberts |
0:9c052ff8dd6a | 70 | red = LED_OFF; |
Wayne Roberts |
0:9c052ff8dd6a | 71 | rfsw2 = 0; |
Wayne Roberts |
0:9c052ff8dd6a | 72 | rfsw1 = 0; |
Wayne Roberts |
0:9c052ff8dd6a | 73 | } |
Wayne Roberts |
0:9c052ff8dd6a | 74 | } |
Wayne Roberts |
0:9c052ff8dd6a | 75 | |
Wayne Roberts |
0:9c052ff8dd6a | 76 | void |
Wayne Roberts |
0:9c052ff8dd6a | 77 | Radio::set_tx_dbm(int8_t dbm) |
Wayne Roberts |
0:9c052ff8dd6a | 78 | { |
Wayne Roberts |
0:9c052ff8dd6a | 79 | //int i = dbm; |
Wayne Roberts |
0:9c052ff8dd6a | 80 | RegPdsTrim1_t pds_trim; |
Wayne Roberts |
0:9c052ff8dd6a | 81 | uint8_t adr; |
Wayne Roberts |
0:9c052ff8dd6a | 82 | |
Wayne Roberts |
0:9c052ff8dd6a | 83 | radio.RegPaConfig.octet = radio.read_reg(REG_PACONFIG); |
Wayne Roberts |
0:9c052ff8dd6a | 84 | |
Wayne Roberts |
0:9c052ff8dd6a | 85 | if (dbm < 20) { |
Wayne Roberts |
0:9c052ff8dd6a | 86 | radio.RegPaConfig.bits.PaSelect = 1; |
Wayne Roberts |
0:9c052ff8dd6a | 87 | if (dbm < 0) |
Wayne Roberts |
0:9c052ff8dd6a | 88 | dbm = 0; |
Wayne Roberts |
0:9c052ff8dd6a | 89 | radio.RegPaConfig.bits.OutputPower = PaBTable[dbm]; |
Wayne Roberts |
0:9c052ff8dd6a | 90 | } else { |
Wayne Roberts |
0:9c052ff8dd6a | 91 | radio.RegPaConfig.bits.PaSelect = 0; |
Wayne Roberts |
0:9c052ff8dd6a | 92 | if (dbm > 30) |
Wayne Roberts |
0:9c052ff8dd6a | 93 | dbm = 30; |
Wayne Roberts |
0:9c052ff8dd6a | 94 | radio.RegPaConfig.bits.OutputPower = RfoTable[dbm-20]; |
Wayne Roberts |
0:9c052ff8dd6a | 95 | } |
Wayne Roberts |
0:9c052ff8dd6a | 96 | |
Wayne Roberts |
0:9c052ff8dd6a | 97 | if (radio.type == SX1276) |
Wayne Roberts |
0:9c052ff8dd6a | 98 | adr = REG_PDSTRIM1_SX1276; |
Wayne Roberts |
0:9c052ff8dd6a | 99 | else |
Wayne Roberts |
0:9c052ff8dd6a | 100 | adr = REG_PDSTRIM1_SX1272; |
Wayne Roberts |
0:9c052ff8dd6a | 101 | |
Wayne Roberts |
0:9c052ff8dd6a | 102 | pds_trim.octet = radio.read_reg(adr); |
Wayne Roberts |
0:9c052ff8dd6a | 103 | |
Wayne Roberts |
0:9c052ff8dd6a | 104 | if (radio.RegPaConfig.bits.PaSelect) { |
Wayne Roberts |
0:9c052ff8dd6a | 105 | /* PABOOST used: +2dbm to +17, or +20 */ |
Wayne Roberts |
0:9c052ff8dd6a | 106 | if (dbm == 20) { |
Wayne Roberts |
0:9c052ff8dd6a | 107 | dbm -= 3; |
Wayne Roberts |
0:9c052ff8dd6a | 108 | pds_trim.bits.prog_txdac = 7; |
Wayne Roberts |
0:9c052ff8dd6a | 109 | radio.write_reg(adr, pds_trim.octet); |
Wayne Roberts |
0:9c052ff8dd6a | 110 | ocp(150); |
Wayne Roberts |
0:9c052ff8dd6a | 111 | } else if (dbm < 18) { |
Wayne Roberts |
0:9c052ff8dd6a | 112 | pds_trim.bits.prog_txdac = 5; |
Wayne Roberts |
0:9c052ff8dd6a | 113 | radio.write_reg(adr, pds_trim.octet); |
Wayne Roberts |
0:9c052ff8dd6a | 114 | ocp(120); |
Wayne Roberts |
0:9c052ff8dd6a | 115 | } |
Wayne Roberts |
0:9c052ff8dd6a | 116 | } else |
Wayne Roberts |
0:9c052ff8dd6a | 117 | ocp(80); |
Wayne Roberts |
0:9c052ff8dd6a | 118 | |
Wayne Roberts |
0:9c052ff8dd6a | 119 | radio.write_reg(REG_PACONFIG, radio.RegPaConfig.octet); |
Wayne Roberts |
0:9c052ff8dd6a | 120 | } // ..set_tx_dbm() |
Wayne Roberts |
0:9c052ff8dd6a | 121 | |
Wayne Roberts |
0:9c052ff8dd6a | 122 | void Radio::boardInit() |
Wayne Roberts |
0:9c052ff8dd6a | 123 | { |
Wayne Roberts |
0:9c052ff8dd6a | 124 | red = LED_OFF; |
Wayne Roberts |
0:9c052ff8dd6a | 125 | yellow = LED_OFF; |
Wayne Roberts |
0:9c052ff8dd6a | 126 | } |
Wayne Roberts |
0:9c052ff8dd6a | 127 |