end node on synchronous star LoRa network.

Dependencies:   SX127x sx12xx_hal TSL2561

radio chip selection

Radio chip driver is not included, allowing choice of radio device.
If you're using SX1272 or SX1276, then import sx127x driver into your program.
if you're using SX1261 or SX1262, then import sx126x driver into your program.
if you're using SX1280, then import sx1280 driver into your program.
If you're using NAmote72 or Murata discovery, then you must import only sx127x driver.

This project for use with LoRaWAN_singlechannel_gateway project.

Alternately gateway running on raspberry pi can be used as gateway.

LoRaWAN on single radio channel

Network description is at gateway project page. Synchronous star network.

Hardware Support

This project supports SX1276 and SX1272, sx126x kit, sx126x shield, and sx128x 2.4GHz. The ST board B-L072Z-LRWAN1 is also supported (TypeABZ module). When B-L072Z-LRWAN1 target is selected, TARGET_DISCO_L072CZ_LRWAN1 is defined by tools, allowing correct radio driver configuration for this platform. Alternately, any mbed board that can use LoRa radio shield board should work, but NUCLEO boards are tested.

End-node Unique ID

DevEUI is created from CPU serial number. AppEUI and AppKey are declared as software constants.

End-node Configuration

Data rate definition LORAMAC_DEFAULT_DATARATE configured in LoRaMac-definitions.h. See gateway project page for configuration of gateway.
LoRaWAN addressing is configured in Comissioning.h; only OTA mode is functional.
Header file board/lora_config.h, selects application layer options (i.e. sensors) to be compiled in.

Serial Interface

Serial port operates at 115200bps.
Application layer single_us915_main.cpp User button triggers uplink (i.e. blue button on nucleo board), or jumper enables continuously sends repeated uplink packets. The MAC layer holds each uplink request until the allocated timeslot.

commandargumentsdescription
?-print available commands
. (period)-print status (DevEUI, DevAddr, etc)
ullength integerset payload length of test uplink packets

sensor demo

Selected grove sensors may be plugged into SX1272 shield.
To enable, edit lora_config.h to define SENSORS.

Sensor connections on SX1272MB2xAS:

D8 D9: buttonRX TX: (unused)A3 A4: Rotary Angle Sensor
D6 D7: RGB LEDSCL SDA: digital light sensorA1 A2: Rotary Angle Sensor

Digital input pin, state reported via uplink: PC8
Digital output pin, controlled via downlink: PC6
PWM out: PB_10

Jumper enables auto-repeated transmit: PC10 and PC12 on NUCLEO board, located on end of morpho headers nearby JP4.

Committer:
Wayne Roberts
Date:
Mon Jul 13 09:15:59 2020 -0700
Revision:
35:be452a242876
Parent:
0:8f0d0ae0a077
remove old crypto

Who changed what in which revision?

UserRevisionLine numberNew contents of line
dudmuck 0:8f0d0ae0a077 1 /*!
dudmuck 0:8f0d0ae0a077 2 * \file LoRaMacTest.h
dudmuck 0:8f0d0ae0a077 3 *
dudmuck 0:8f0d0ae0a077 4 * \brief LoRa MAC layer test function implementation
dudmuck 0:8f0d0ae0a077 5 *
dudmuck 0:8f0d0ae0a077 6 * \copyright Revised BSD License, see section \ref LICENSE.
dudmuck 0:8f0d0ae0a077 7 *
dudmuck 0:8f0d0ae0a077 8 * \code
dudmuck 0:8f0d0ae0a077 9 * ______ _
dudmuck 0:8f0d0ae0a077 10 * / _____) _ | |
dudmuck 0:8f0d0ae0a077 11 * ( (____ _____ ____ _| |_ _____ ____| |__
dudmuck 0:8f0d0ae0a077 12 * \____ \| ___ | (_ _) ___ |/ ___) _ \
dudmuck 0:8f0d0ae0a077 13 * _____) ) ____| | | || |_| ____( (___| | | |
dudmuck 0:8f0d0ae0a077 14 * (______/|_____)_|_|_| \__)_____)\____)_| |_|
dudmuck 0:8f0d0ae0a077 15 * (C)2013 Semtech
dudmuck 0:8f0d0ae0a077 16 *
dudmuck 0:8f0d0ae0a077 17 * ___ _____ _ ___ _ _____ ___ ___ ___ ___
dudmuck 0:8f0d0ae0a077 18 * / __|_ _/_\ / __| |/ / __/ _ \| _ \/ __| __|
dudmuck 0:8f0d0ae0a077 19 * \__ \ | |/ _ \ (__| ' <| _| (_) | / (__| _|
dudmuck 0:8f0d0ae0a077 20 * |___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___|
dudmuck 0:8f0d0ae0a077 21 * embedded.connectivity.solutions===============
dudmuck 0:8f0d0ae0a077 22 *
dudmuck 0:8f0d0ae0a077 23 * \endcode
dudmuck 0:8f0d0ae0a077 24 *
dudmuck 0:8f0d0ae0a077 25 * \author Miguel Luis ( Semtech )
dudmuck 0:8f0d0ae0a077 26 *
dudmuck 0:8f0d0ae0a077 27 * \author Gregory Cristian ( Semtech )
dudmuck 0:8f0d0ae0a077 28 *
dudmuck 0:8f0d0ae0a077 29 * \author Daniel Jäckle ( STACKFORCE )
dudmuck 0:8f0d0ae0a077 30 *
dudmuck 0:8f0d0ae0a077 31 * \defgroup LORAMACTEST LoRa MAC layer test function implementation
dudmuck 0:8f0d0ae0a077 32 * This module specifies the API implementation of test function of the LoRaMAC layer.
dudmuck 0:8f0d0ae0a077 33 * The functions in this file are only for testing purposes only.
dudmuck 0:8f0d0ae0a077 34 * \{
dudmuck 0:8f0d0ae0a077 35 */
dudmuck 0:8f0d0ae0a077 36 #ifndef __LORAMACTEST_H__
dudmuck 0:8f0d0ae0a077 37 #define __LORAMACTEST_H__
dudmuck 0:8f0d0ae0a077 38
dudmuck 0:8f0d0ae0a077 39 /*!
dudmuck 0:8f0d0ae0a077 40 * \brief Enabled or disables the reception windows
dudmuck 0:8f0d0ae0a077 41 *
dudmuck 0:8f0d0ae0a077 42 * \details This is a test function. It shall be used for testing purposes only.
dudmuck 0:8f0d0ae0a077 43 * Changing this attribute may lead to a non-conformance LoRaMac operation.
dudmuck 0:8f0d0ae0a077 44 *
dudmuck 0:8f0d0ae0a077 45 * \param [IN] enable - Enabled or disables the reception windows
dudmuck 0:8f0d0ae0a077 46 */
dudmuck 0:8f0d0ae0a077 47 void LoRaMacTestRxWindowsOn( bool enable );
dudmuck 0:8f0d0ae0a077 48
dudmuck 0:8f0d0ae0a077 49 /*!
dudmuck 0:8f0d0ae0a077 50 * \brief Enables the MIC field test
dudmuck 0:8f0d0ae0a077 51 *
dudmuck 0:8f0d0ae0a077 52 * \details This is a test function. It shall be used for testing purposes only.
dudmuck 0:8f0d0ae0a077 53 * Changing this attribute may lead to a non-conformance LoRaMac operation.
dudmuck 0:8f0d0ae0a077 54 *
dudmuck 0:8f0d0ae0a077 55 * \param [IN] txPacketCounter - Fixed Tx packet counter value
dudmuck 0:8f0d0ae0a077 56 */
dudmuck 0:8f0d0ae0a077 57 void LoRaMacTestSetMic( uint16_t txPacketCounter );
dudmuck 0:8f0d0ae0a077 58
dudmuck 0:8f0d0ae0a077 59 /*!
dudmuck 0:8f0d0ae0a077 60 * \brief Enabled or disables the duty cycle
dudmuck 0:8f0d0ae0a077 61 *
dudmuck 0:8f0d0ae0a077 62 * \details This is a test function. It shall be used for testing purposes only.
dudmuck 0:8f0d0ae0a077 63 * Changing this attribute may lead to a non-conformance LoRaMac operation.
dudmuck 0:8f0d0ae0a077 64 *
dudmuck 0:8f0d0ae0a077 65 * \param [IN] enable - Enabled or disables the duty cycle
dudmuck 0:8f0d0ae0a077 66 */
dudmuck 0:8f0d0ae0a077 67 void LoRaMacTestSetDutyCycleOn( bool enable );
dudmuck 0:8f0d0ae0a077 68
dudmuck 0:8f0d0ae0a077 69 /*!
dudmuck 0:8f0d0ae0a077 70 * \brief Sets the channel index
dudmuck 0:8f0d0ae0a077 71 *
dudmuck 0:8f0d0ae0a077 72 * \details This is a test function. It shall be used for testing purposes only.
dudmuck 0:8f0d0ae0a077 73 * Changing this attribute may lead to a non-conformance LoRaMac operation.
dudmuck 0:8f0d0ae0a077 74 *
dudmuck 0:8f0d0ae0a077 75 * \param [IN] channel - Channel index
dudmuck 0:8f0d0ae0a077 76 */
dudmuck 0:8f0d0ae0a077 77 void LoRaMacTestSetChannel( uint8_t channel );
dudmuck 0:8f0d0ae0a077 78
dudmuck 0:8f0d0ae0a077 79 /*! \} defgroup LORAMACTEST */
dudmuck 0:8f0d0ae0a077 80
dudmuck 0:8f0d0ae0a077 81 #endif // __LORAMACTEST_H__