Firmware for the mbed in the BlueSync Sensor platform. Intended to communicate with a BlueGiga BLE112 Bluetooth LE module over UART.
Dependencies: TimerCapture mbed
main.cpp
- Committer:
- dishbreak
- Date:
- 2015-05-30
- Revision:
- 2:ac474fccf29b
- Parent:
- 1:cb941edd7bce
- Child:
- 3:54fef6ac433b
File content as of revision 2:ac474fccf29b:
#include "mbed.h" #include "TimerCapture.h" #include "bluesync_types.h" /** @file main.cpp @brief Main for the BlueSync mbed application. */ Serial ble112(p9, p10); ///< Serial connection for communicating with the BLE112. TimerCapture * capPin; ///< Capture pin, wired to GPIO pin on BLE112. DigitalOut bleSlaveLed(LED1); DigitalOut bleScanningLed(LED2); DigitalOut bleAdvRecv(LED3); DigitalOut bleTimeStampRecv(LED4); void blankOutLeds() { bleSlaveLed = 0; bleScanningLed = 0; bleAdvRecv = 0; bleTimeStampRecv = 0; } /*uint8_t[] toByteArray(uint32_t input) { uint8_t byte[4]; byte[0] = input & 0x000000FF; byte[1] = (input & 0x0000FF00) >> 8; byte[2] = (input & 0x00FF0000) >> 16; byte[3] = (input & 0xFF000000) >> 24; return byte; }*/ void on_adv_recv() { blankOutLeds(); bleAdvRecv = 1; uint8_t hw_addr[6]; for (int i = 5; i >=0; i--) { hw_addr[i] = ble112.getc(); } printf("***************\r\n"); printf("HW Addr: %02x:%02x:%02x:%02x:%02x:%02x ", hw_addr[0], hw_addr[1], hw_addr[2], hw_addr[3], hw_addr[4], hw_addr[5]); printf("Obs At: %d\r\n", capPin->getTime()); } void on_master_mode() { blankOutLeds(); bleScanningLed = 1; } void on_slave_mode() { blankOutLeds(); bleSlaveLed = 1; intByteArray bitArray; bitArray.integer = capPin->getTime(); printf("Sending timestamp %d (%x)\r\n", bitArray.integer, bitArray.integer); uint8_t event = (uint8_t) EventCode::SET_TIMESTAMP; printf("Sending event: %x\r\n", event); ble112.putc(0x05); for (int i = 3; i >= 0; i--) { ble112.putc(bitArray.byte[i]); } } void on_offset_recv() { blankOutLeds(); bleTimeStampRecv = 1; intByteArray bitArray; for (int i = 3; i >= 0; i--) { bitArray.byte[i] = ble112.getc(); } printf("Got offset %d\r\n", bitArray.signed_integer); } void on_serial_rcv() { uint8_t command = ble112.getc(); printf("Command: %x\r\n", command); switch (command) { case EventCode::ADV_RECV: on_adv_recv(); break; case EventCode::SLAVE_MODE: on_slave_mode(); break; case EventCode::MASTER_MODE: on_master_mode(); break; case EventCode::SET_TIMESTAMP: break; case EventCode::OFFSET_RECV: on_offset_recv(); break; default: printf("Got unexpected byte '%x' from terminal!\r\n",command); break; } } int main() { printf("Booted!\r\n"); TimerCapture::startTimer(); capPin = new TimerCapture(p30); ble112.baud(115200); //ble112.set_flow_control(SerialBase::RTSCTS, p7, p8); ble112.attach(&on_serial_rcv); uint8_t command = (uint8_t) EventCode::GET_STATE; printf("Sending command %x\r\n", command); ble112.putc(command); for (int i = 0; i < 4; i++) { ble112.putc(0x00); } }