Damian Gabino
MCU driver/HAL for the Picocell Gateway concentrator board. The firmware implements either a USB CDC protocol or a UART protocol to bridge commands coming from host to the SX1308 SPI interface.
Diff: src/DebugConfig/Pico_STM32F401RETx.dbgconf
- Revision:
- 0:c76361bd82e8
diff -r 000000000000 -r c76361bd82e8 src/DebugConfig/Pico_STM32F401RETx.dbgconf --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/DebugConfig/Pico_STM32F401RETx.dbgconf Wed Apr 11 14:42:47 2018 +0000 @@ -0,0 +1,33 @@ +// <<< Use Configuration Wizard in Context Menu >>> + +// <h>Debug MCU Configuration +// <o.0> DBG_SLEEP <i> Debug Sleep Mode +// <o.1> DBG_STOP <i> Debug Stop Mode +// <o.2> DBG_STANDBY <i> Debug Standby Mode +// </h> +DbgMCU_CR = 0x00000007; + +// <h> Debug MCU APB1 Freeze +// <o.0> DBG_TIM2_STOP <i> Timer 2 Stopped when Core is halted +// <o.1> DBG_TIM3_STOP <i> Timer 3 Stopped when Core is halted +// <o.2> DBG_TIM4_STOP <i> Timer 4 Stopped when Core is halted +// <o.3> DBG_TIM5_STOP <i> Timer 5 Stopped when Core is halted +// <o.10> DBG_RTC_STOP <i> RTC Stopped when Core is halted +// <o.11> DBG_WWDG_STOP <i> Window Watchdog Stopped when Core is halted +// <o.12> DBG_IWDG_STOP <i> Independent Watchdog Stopped when Core is halted +// <o.21> DBG_I2C1_SMBUS_TIMEOUT <i> I2C1 SMBUS Timeout Mode Stopped when Core is halted +// <o.22> DBG_I2C2_SMBUS_TIMEOUT <i> I2C2 SMBUS Timeout Mode Stopped when Core is halted +// <o.23> DBG_I2C3_SMBUS_TIMEOUT <i> I2C3 SMBUS Timeout Mode Stopped when Core is halted +// </h> +DbgMCU_APB1_Fz = 0x00000000; + + +// <h> Debug MCU APB2 Freeze +// <o.0> DBG_TIM1_STOP <i> Timer 1 Stopped when Core is halted +// <o.16> DBG_TIM9_STOP <i> Timer 9 Stopped when Core is halted +// <o.17> DBG_TIM10_STOP <i> Timer 10 Stopped when Core is halted +// <o.18> DBG_TIM11_STOP <i> Timer 11 Stopped when Core is halted +// </h> +DbgMCU_APB2_Fz = 0x00000000; + +// <<< end of configuration section >>> \ No newline at end of file