Diff: oslib/osi.h

Revision:

0:dbe5e7db3c45

diff -r 000000000000 -r dbe5e7db3c45 oslib/osi.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/oslib/osi.h	Sat Jun 06 13:32:15 2015 +0000
@@ -0,0 +1,595 @@
+//*****************************************************************************
+// osi.h
+//
+// MACRO and Function prototypes for TI-RTOS and Free-RTOS API calls
+//
+// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 
+// 
+// 
+//  Redistribution and use in source and binary forms, with or without 
+//  modification, are permitted provided that the following conditions 
+//  are met:
+//
+//    Redistributions of source code must retain the above copyright 
+//    notice, this list zof conditions and the following disclaimer.
+//
+//    Redistributions in binary form must reproduce the above copyright
+//    notice, this list of conditions and the following disclaimer in the 
+//    documentation and/or other materials provided with the   
+//    distribution.
+//
+//    Neither the name of Texas Instruments Incorporated nor the names of
+//    its contributors may be used to endorse or promote products derived
+//    from this software without specific prior written permission.
+//
+//  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+//  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+//  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+//  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+//  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+//  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+//  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+//  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+//  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+//  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//*****************************************************************************
+
+#ifndef __OSI_H__
+#define	__OSI_H__
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#include "portable.h"
+  
+#define OSI_WAIT_FOREVER   			(0xFFFFFFFF)
+
+#define OSI_NO_WAIT        			(0)
+
+typedef int OsiReturnVal_e;
+
+#define OSI_OK					(0)
+#define OSI_FAILURE             (-1)
+#define OSI_OPERATION_FAILED    (-2)
+#define OSI_ABORTED             (-3)
+#define OSI_INVALID_PARAMS      (-4)
+#define OSI_MEMORY_ALLOCATION_FAILURE    (-5)
+#define OSI_TIMEOUT                      (-6)
+#define OSI_EVENTS_IN_USE                (-7)
+#define OSI_EVENT_OPEARTION_FAILURE      (-8)
+
+/*typedef enum
+{
+  OSI_OK = 0,
+  OSI_FAILURE = -1,
+  OSI_OPERATION_FAILED = -2,
+  OSI_ABORTED = -3,
+  OSI_INVALID_PARAMS = -4,
+  OSI_MEMORY_ALLOCATION_FAILURE = -5,
+  OSI_TIMEOUT = -6,
+  OSI_EVENTS_IN_USE = -7,
+  OSI_EVENT_OPEARTION_FAILURE = -8
+}OsiReturnVal_e;*/
+
+
+//#define ENTER_CRITICAL_SECTION			osi_EnterCritical()
+//#define EXIT_CRITICAL_SECTION			osi_ExitCritical()
+
+typedef void* OsiMsgQ_t;
+
+ /*!
+	\brief type definition for a time value
+
+	\note	On each porting or platform the type could be whatever is needed - integer, pointer to structure etc.
+*/
+typedef uint32_t OsiTime_t;
+//typedef unsigned long OsiTime_t;
+/*!
+	\brief 	type definition for a sync object container
+
+	Sync object is object used to synchronize between two threads or thread and interrupt handler.
+	One thread is waiting on the object and the other thread send a signal, which then
+	release the waiting thread.
+	The signal must be able to be sent from interrupt context.
+	This object is generally implemented by binary semaphore or events.
+
+	\note	On each porting or platform the type could be whatever is needed - integer, structure etc.
+*/
+//typedef unsigned int OsiSyncObj_t;
+typedef void * OsiSyncObj_t;
+
+/*!
+	\brief 	type definition for a locking object container
+
+	Locking object are used to protect a resource from mutual accesses of two or more threads.
+	The locking object should support re-entrant locks by a signal thread.
+	This object is generally implemented by mutex semaphore
+
+	\note	On each porting or platform the type could be whatever is needed - integer, structure etc.
+*/
+//typedef unsigned int OsiLockObj_t;
+typedef void * OsiLockObj_t;
+
+/*!
+	\brief 	type definition for a spawn entry callback
+
+	the spawn mechanism enable to run a function on different context.
+	This mechanism allow to transfer the execution context from interrupt context to thread context
+	or changing the context from an unknown user thread to general context.
+	The implementation of the spawn mechanism depends on the user's system requirements and could varies
+	from implementation of serialized execution using single thread to creating thread per call
+
+	\note	The stack size of the execution thread must be at least of TBD bytes!
+*/
+typedef void (*P_OSI_SPAWN_ENTRY)(void* pValue);
+
+typedef void (*P_OSI_EVENT_HANDLER)(void* pValue);
+
+typedef void (*P_OSI_TASK_ENTRY)(void* pValue);
+
+typedef void (*P_OSI_INTR_ENTRY)(void);
+
+typedef void* OsiTaskHandle;
+
+/*!
+	\brief 	This function registers an interrupt in NVIC table
+
+	The sync object is used for synchronization between different thread or ISR and
+	a thread.
+
+	\param	iIntrNum	-	Interrupt number to register
+	\param	pEntry	    -	Pointer to the interrupt handler
+
+	\return upon successful creation the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_InterruptRegister(int iIntrNum,P_OSI_INTR_ENTRY pEntry,unsigned char ucPriority);
+
+/*!
+	\brief 	This function De-registers an interrupt in NVIC table
+
+	\param	iIntrNum	-	Interrupt number to register
+	\param	pEntry	    -	Pointer to the interrupt handler
+
+	\return upon successful creation the function should return Positive number
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+void osi_InterruptDeRegister(int iIntrNum);
+
+
+/*!
+	\brief 	This function creates a sync object
+
+	The sync object is used for synchronization between different thread or ISR and
+	a thread.
+
+	\param	pSyncObj	-	pointer to the sync object control block
+
+	\return upon successful creation the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_SyncObjCreate(OsiSyncObj_t* pSyncObj);
+
+
+/*!
+	\brief 	This function deletes a sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+
+	\return upon successful deletion the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_SyncObjDelete(OsiSyncObj_t* pSyncObj);
+
+/*!
+	\brief 		This function generates a sync signal for the object.
+
+	All suspended threads waiting on this sync object are resumed
+
+	\param		pSyncObj	-	pointer to the sync object control block
+
+	\return 	upon successful signalling the function should return 0
+				Otherwise, a negative value indicating the error code shall be returned
+	\note		the function could be called from ISR context
+	\warning
+*/
+OsiReturnVal_e osi_SyncObjSignal(OsiSyncObj_t* pSyncObj);
+
+/*!
+	\brief 		This function generates a sync signal for the object.
+				from ISR context.
+
+	All suspended threads waiting on this sync object are resumed
+
+	\param		pSyncObj	-	pointer to the sync object control block
+
+	\return 	upon successful signalling the function should return 0
+				Otherwise, a negative value indicating the error code shall be returned
+	\note		the function is called from ISR context
+	\warning
+*/
+OsiReturnVal_e osi_SyncObjSignalFromISR(OsiSyncObj_t* pSyncObj);
+
+/*!
+	\brief 	This function waits for a sync signal of the specific sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+	\param	Timeout		-	numeric value specifies the maximum number of mSec to
+							stay suspended while waiting for the sync signal
+							Currently, the simple link driver uses only two values:
+								- OSI_WAIT_FOREVER
+								- OSI_NO_WAIT
+
+	\return upon successful reception of the signal within the timeout window return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_SyncObjWait(OsiSyncObj_t* pSyncObj , OsiTime_t Timeout);
+
+/*!
+	\brief 	This function clears a sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+
+	\return upon successful clearing the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_SyncObjClear(OsiSyncObj_t* pSyncObj);
+
+/*!
+	\brief 	This function creates a locking object.
+
+	The locking object is used for protecting a shared resources between different
+	threads.
+
+	\param	pLockObj	-	pointer to the locking object control block
+
+	\return upon successful creation the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_LockObjCreate(OsiLockObj_t* pLockObj);
+
+/*!
+	\brief 	This function deletes a locking object.
+
+	\param	pLockObj	-	pointer to the locking object control block
+
+	\return upon successful deletion the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_LockObjDelete(OsiLockObj_t* pLockObj);
+
+/*!
+	\brief 	This function locks a locking object.
+
+	All other threads that call this function before this thread calls
+	the osi_LockObjUnlock would be suspended
+
+	\param	pLockObj	-	pointer to the locking object control block
+	\param	Timeout		-	numeric value specifies the maximum number of mSec to
+							stay suspended while waiting for the locking object
+							Currently, the simple link driver uses only two values:
+								- OSI_WAIT_FOREVER
+								- OSI_NO_WAIT
+
+
+	\return upon successful reception of the locking object the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_LockObjLock(OsiLockObj_t* pLockObj , OsiTime_t Timeout);
+
+/*!
+	\brief 	This function unlock a locking object.
+
+	\param	pLockObj	-	pointer to the locking object control block
+
+	\return upon successful unlocking the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_LockObjUnlock(OsiLockObj_t* pLockObj);
+
+
+/*!
+	\brief 	This function call the pEntry callback from a different context
+
+	\param	pEntry		-	pointer to the entry callback function
+
+	\param	pValue		- 	pointer to any type of memory structure that would be
+							passed to pEntry callback from the execution thread.
+
+	\param	flags		- 	execution flags - reserved for future usage
+
+	\return upon successful registration of the spawn the function should return 0
+			(the function is not blocked till the end of the execution of the function
+			and could be returned before the execution is actually completed)
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+/*!
+	\brief 	This function creates a Task.
+
+	Creates a new Task and add it to the last of tasks that are ready to run
+
+	\param	pEntry	-	pointer to the Task Function
+	\param	pcName	-	Task Name String
+	\param	usStackDepth	-	Stack Size Stack Size in 32-bit long words
+	\param	pvParameters	-	pointer to structure to be passed to the Task Function
+	\param	uxPriority	-	Task Priority
+
+	\return upon successful unlocking the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_TaskCreate(P_OSI_TASK_ENTRY pEntry,const signed char * const pcName,unsigned short usStackDepth,void *pvParameters,uint32_t uxPriority,OsiTaskHandle *pTaskHandle);
+
+/*!
+	\brief 	This function Deletes a Task.
+
+	Deletes a  Task and remove it from list of running task
+
+	\param	pTaskHandle	-	Task Handle
+
+	\note
+	\warning
+*/
+void osi_TaskDelete(OsiTaskHandle* pTaskHandle);
+
+/*!
+	\brief 	This function call the pEntry callback from a different context
+
+	\param	pEntry		-	pointer to the entry callback function
+
+	\param	pValue		- 	pointer to any type of memory structure that would be
+							passed to pEntry callback from the execution thread.
+
+	\param	flags		- 	execution flags - reserved for future usage
+
+	\return upon successful registration of the spawn the function should return 0
+			(the function is not blocked till the end of the execution of the function
+			and could be returned before the execution is actually completed)
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+OsiReturnVal_e osi_Spawn(P_OSI_SPAWN_ENTRY pEntry , void* pValue , uint32_t flags);
+
+
+/*******************************************************************************
+
+This function creates a message queue that is typically used for inter thread
+communication. 
+
+Parameters:
+
+	pMsgQ		-	pointer to the message queue control block
+	pMsgQName	-	pointer to the name of the message queue
+	MsgSize		-	the size of the message. 
+
+			NOTICE: THE MESSGAE SIZE MUST BE SMALLER THAN 16
+
+	MaxMsgs		-	maximum number of messages.
+
+Please note that this function allocates the entire memory required 
+for the maximum number of messages (MsgSize * MaxMsgs). 
+
+********************************************************************************/
+OsiReturnVal_e osi_MsgQCreate(OsiMsgQ_t* 		pMsgQ , 
+							  char*				pMsgQName,
+							  uint32_t 		MsgSize,
+							  uint32_t 		MaxMsgs);
+
+/*******************************************************************************
+
+This function deletes a specific message queue.
+All threads suspended waiting for a message from this queue are resumed with
+an error return value. 
+
+Parameters:
+
+	pMsgQ		-	pointer to the message queue control block
+
+********************************************************************************/
+OsiReturnVal_e osi_MsgQDelete(OsiMsgQ_t* pMsgQ);
+
+
+/*******************************************************************************
+
+This function writes a message to a specific message queue.
+
+Notice that the message is copied to the queue from the memory area specified 
+by pMsg pointer.
+
+--------------------------------------------------------------------------------
+THIS FUNCTION COULD BE CALLED FROM ISR AS LONG AS THE TIMEOUT PARAMETER IS 
+SET TO "OSI_NO_WAIT"
+--------------------------------------------------------------------------------
+
+Parameters:
+
+	pMsgQ		-	pointer to the message queue control block
+	pMsg		- 	pointer to the message
+	Timeout		-	numeric value specifies the maximum number of mSec to stay 
+					suspended while waiting for available space for the message
+
+********************************************************************************/
+OsiReturnVal_e osi_MsgQWrite(OsiMsgQ_t* pMsgQ, void* pMsg , OsiTime_t Timeout);
+
+
+/*******************************************************************************
+
+This function retrieves a message from the specified message queue. The
+retrieved message is copied from the queue into the memory area specified by 
+the pMsg pointer 
+
+Parameters:
+
+	pMsgQ		-	pointer to the message queue control block
+	pMsg		- 	pointer that specify the location where to copy the message
+	Timeout		-	numeric value specifies the maximum number of mSec to stay 
+					suspended while waiting for a message to be available
+
+********************************************************************************/
+OsiReturnVal_e osi_MsgQRead(OsiMsgQ_t* pMsgQ, void* pMsg , OsiTime_t Timeout);
+
+/*!
+	\brief 	This function starts the OS Scheduler
+	\param	- void
+	\return - void
+	\note
+	\warning
+*/
+void osi_start();
+
+/*!
+    \brief			  		Allocates Memory on Heap
+	\param	Size		- 	Size of the Buffer to be allocated
+    \sa
+    \note
+    \warning
+*/
+void * mem_Malloc(uint32_t Size);
+
+
+/*!
+    \brief				Deallocates Memory
+	\param	pMem		-	Pointer to the Buffer to be freed
+	\return void
+    \sa
+    \note
+    \warning
+*/
+void mem_Free(void *pMem);
+
+
+/*!
+    \brief				Set Memory
+	\param	pBuf		-	Pointer to the Buffer
+	\param	Val			- 	Value to be set
+	\param	Size 		- 	Size of the memory to be set
+    \sa
+    \note
+    \warning        
+*/
+void  mem_set(void *pBuf,int Val,size_t Size);
+
+/*!
+    \brief				Copy Memory
+	\param	pDst		-	Pointer to the Destination Buffer
+	\param	pSrc 		- 	Pointer to the Source Buffer
+	\param	Size 		- 	Size of the memory to be copied
+	\return void
+    \note
+    \warning        
+*/
+void  mem_copy(void *pDst, void *pSrc,size_t Size);
+
+/*!
+    \brief			Enter Critical Section
+    \sa
+    \note
+    \warning        
+*/
+uint32_t osi_EnterCritical(void);
+
+/*!
+    \brief			Exit Critical Section
+    \sa
+    \note
+    \warning        
+*/
+void osi_ExitCritical(uint32_t ulKey);
+
+/*!
+	\brief 	This function used to save the os context before sleep
+	\param	void
+	\return void
+	\note
+	\warning
+*/
+void osi_ContextSave();
+/*!
+	\brief 	This function used to retrieve the context after sleep
+	\param	void
+	\return void
+	\note
+	\warning
+*/
+void osi_ContextRestore();
+
+/*!
+	\brief 	This function used to suspend the task for the specified number of milli secs
+	\param	MilliSecs	-	Time in millisecs to suspend the task
+	\return void
+	\note
+	\warning
+*/
+void osi_Sleep(unsigned int MilliSecs);
+
+/*!
+	\brief 	This function used to disable the tasks
+	\param	- void
+	\return - Key with the suspended tasks
+	\note
+	\warning
+*/
+uint32_t osi_TaskDisable(void);
+
+/*!
+	\brief 	This function used to enable all tasks
+	\param	unsigned long
+	\return - void
+	\note
+	\warning
+*/
+void osi_TaskEnable(uint32_t);
+/*!
+	\brief structure definition for simple link spawn message
+
+	\note	On each porting or platform the type could be whatever is needed - integer, pointer to structure etc.
+*/
+  
+typedef struct
+{
+    P_OSI_SPAWN_ENTRY pEntry;
+    void* pValue;
+}tSimpleLinkSpawnMsg;
+  
+/* The queue used to send message to simple link spawn task. */
+extern void* xSimpleLinkSpawnQueue;
+
+/* API for SL Task*/
+OsiReturnVal_e VStartSimpleLinkSpawnTask(unsigned portBASE_TYPE uxPriority);
+void VDeleteSimpleLinkSpawnTask( void );
+
+
+
+#ifdef  __cplusplus
+}
+#endif // __cplusplus
+
+#endif
+