David Dollar / XBee

Dependents:   MachineCloud

Fork of XBee by Suga koubou

Embed: (wiki syntax)

« Back to documentation index

Rx16Response Class Reference

Rx16Response Class Reference

Represents a Series 1 16-bit address RX packet. More...

#include <XBee.h>

Inherits RxResponse.

Public Member Functions

virtual uint16_t getDataLength ()
 Returns the length of the payload.
virtual uint8_t getDataOffset ()
 Returns the position in the frame data where the data begins.
uint8_t getData (int index)
 Returns the specified index of the payload.
uint8_t * getData ()
 Returns the payload array.
uint8_t getApiId ()
 Returns Api Id of the response.
uint8_t getMsbLength ()
 Returns the MSB length of the packet.
uint8_t getLsbLength ()
 Returns the LSB length of the packet.
uint8_t getChecksum ()
 Returns the packet checksum.
uint16_t getFrameDataLength ()
 Returns the length of the frame data: all bytes after the api id, and prior to the checksum Note up to release 0.1.2, this was incorrectly including the checksum in the length.
uint8_t * getFrameData ()
 Returns the buffer that contains the response.
uint16_t getPacketLength ()
 Returns the length of the packet.
void reset ()
 Resets the response to default values.
void init ()
 Initializes the response.
void getZBTxStatusResponse (XBeeResponse &response)
 Call with instance of ZBTxStatusResponse class only if getApiId() == ZB_TX_STATUS_RESPONSE to populate response.
void getZBRxResponse (XBeeResponse &response)
 Call with instance of ZBRxResponse class only if getApiId() == ZB_RX_RESPONSE to populate response.
void getZBRxIoSampleResponse (XBeeResponse &response)
 Call with instance of ZBRxIoSampleResponse class only if getApiId() == ZB_IO_SAMPLE_RESPONSE to populate response.
void getTxStatusResponse (XBeeResponse &response)
 Call with instance of TxStatusResponse only if getApiId() == TX_STATUS_RESPONSE.
void getRx16Response (XBeeResponse &response)
 Call with instance of Rx16Response only if getApiId() == RX_16_RESPONSE.
void getRx64Response (XBeeResponse &response)
 Call with instance of Rx64Response only if getApiId() == RX_64_RESPONSE.
void getRx16IoSampleResponse (XBeeResponse &response)
 Call with instance of Rx16IoSampleResponse only if getApiId() == RX_16_IO_RESPONSE.
void getRx64IoSampleResponse (XBeeResponse &response)
 Call with instance of Rx64IoSampleResponse only if getApiId() == RX_64_IO_RESPONSE.
void getAtCommandResponse (XBeeResponse &responses)
 Call with instance of AtCommandResponse only if getApiId() == AT_COMMAND_RESPONSE.
void getRemoteAtCommandResponse (XBeeResponse &response)
 Call with instance of RemoteAtCommandResponse only if getApiId() == REMOTE_AT_COMMAND_RESPONSE.
void getModemStatusResponse (XBeeResponse &response)
 Call with instance of ModemStatusResponse only if getApiId() == MODEM_STATUS_RESPONSE.
bool isAvailable ()
 Returns true if the response has been successfully parsed and is complete and ready for use.
bool isError ()
 Returns true if the response contains errors.
uint8_t getErrorCode ()
 Returns an error code, or zero, if successful.

Detailed Description

Represents a Series 1 16-bit address RX packet.

Definition at line 458 of file XBee.h.


Member Function Documentation

uint8_t getApiId (  ) [inherited]

Returns Api Id of the response.

Definition at line 38 of file XBee.cpp.

void getAtCommandResponse ( XBeeResponse responses ) [inherited]

Call with instance of AtCommandResponse only if getApiId() == AT_COMMAND_RESPONSE.

Definition at line 625 of file XBee.cpp.

uint8_t getChecksum (  ) [inherited]

Returns the packet checksum.

Definition at line 62 of file XBee.cpp.

uint8_t getData ( int  index ) [inherited]

Returns the specified index of the payload.

The index may be 0 to getDataLength() - 1 This method is deprecated; use uint8_t* getData()

Definition at line 561 of file XBee.cpp.

uint8_t * getData (  ) [inherited]

Returns the payload array.

This may be accessed from index 0 to getDataLength() - 1

Definition at line 565 of file XBee.cpp.

uint16_t getDataLength (  ) [virtual, inherited]

Returns the length of the payload.

Implements RxDataResponse.

Definition at line 464 of file XBee.cpp.

uint8_t getDataOffset (  ) [virtual, inherited]

Returns the position in the frame data where the data begins.

Implements RxDataResponse.

Definition at line 468 of file XBee.cpp.

uint8_t getErrorCode (  ) [inherited]

Returns an error code, or zero, if successful.

Error codes include: CHECKSUM_FAILURE, PACKET_EXCEEDS_BYTE_ARRAY_LENGTH, UNEXPECTED_START_BYTE

Definition at line 90 of file XBee.cpp.

uint8_t * getFrameData (  ) [inherited]

Returns the buffer that contains the response.

Starts with byte that follows API ID and includes all bytes prior to the checksum Length is specified by getFrameDataLength() Note: Unlike Digi's definition of the frame data, this does not start with the API ID.. The reason for this is all responses include an API ID, whereas my frame data includes only the API specific data.

Definition at line 638 of file XBee.cpp.

uint16_t getFrameDataLength (  ) [inherited]

Returns the length of the frame data: all bytes after the api id, and prior to the checksum Note up to release 0.1.2, this was incorrectly including the checksum in the length.

Definition at line 70 of file XBee.cpp.

uint8_t getLsbLength (  ) [inherited]

Returns the LSB length of the packet.

Definition at line 54 of file XBee.cpp.

void getModemStatusResponse ( XBeeResponse response ) [inherited]

Call with instance of ModemStatusResponse only if getApiId() == MODEM_STATUS_RESPONSE.

Definition at line 586 of file XBee.cpp.

uint8_t getMsbLength (  ) [inherited]

Returns the MSB length of the packet.

Definition at line 46 of file XBee.cpp.

uint16_t getPacketLength (  ) [inherited]

Returns the length of the packet.

Definition at line 634 of file XBee.cpp.

void getRemoteAtCommandResponse ( XBeeResponse response ) [inherited]

Call with instance of RemoteAtCommandResponse only if getApiId() == REMOTE_AT_COMMAND_RESPONSE.

Definition at line 543 of file XBee.cpp.

void getRx16IoSampleResponse ( XBeeResponse response ) [inherited]

Call with instance of Rx16IoSampleResponse only if getApiId() == RX_16_IO_RESPONSE.

Definition at line 397 of file XBee.cpp.

void getRx16Response ( XBeeResponse response ) [inherited]

Call with instance of Rx16Response only if getApiId() == RX_16_RESPONSE.

Definition at line 476 of file XBee.cpp.

void getRx64IoSampleResponse ( XBeeResponse response ) [inherited]

Call with instance of Rx64IoSampleResponse only if getApiId() == RX_64_IO_RESPONSE.

Definition at line 417 of file XBee.cpp.

void getRx64Response ( XBeeResponse response ) [inherited]

Call with instance of Rx64Response only if getApiId() == RX_64_RESPONSE.

Definition at line 491 of file XBee.cpp.

void getTxStatusResponse ( XBeeResponse response ) [inherited]

Call with instance of TxStatusResponse only if getApiId() == TX_STATUS_RESPONSE.

Definition at line 439 of file XBee.cpp.

void getZBRxIoSampleResponse ( XBeeResponse response ) [inherited]

Call with instance of ZBRxIoSampleResponse class only if getApiId() == ZB_IO_SAMPLE_RESPONSE to populate response.

Definition at line 260 of file XBee.cpp.

void getZBRxResponse ( XBeeResponse response ) [inherited]

Call with instance of ZBRxResponse class only if getApiId() == ZB_RX_RESPONSE to populate response.

Definition at line 169 of file XBee.cpp.

void getZBTxStatusResponse ( XBeeResponse response ) [inherited]

Call with instance of ZBTxStatusResponse class only if getApiId() == ZB_TX_STATUS_RESPONSE to populate response.

Definition at line 135 of file XBee.cpp.

void init (  ) [inherited]

Initializes the response.

Definition at line 646 of file XBee.cpp.

bool isAvailable (  ) [inherited]

Returns true if the response has been successfully parsed and is complete and ready for use.

Definition at line 78 of file XBee.cpp.

bool isError (  ) [inherited]

Returns true if the response contains errors.

Definition at line 86 of file XBee.cpp.

void reset (  ) [inherited]

Resets the response to default values.

Definition at line 656 of file XBee.cpp.