David Bruce
David Bruce 15597305
Dependencies: mbed N5110 GT511C3
Diff: main.cpp
- Revision:
- 3:938a2d4ae661
- Parent:
- 2:61e0f5bec6ff
diff -r 61e0f5bec6ff -r 938a2d4ae661 main.cpp
--- a/main.cpp Thu Dec 03 05:22:09 2015 +0000
+++ b/main.cpp Mon May 04 15:05:09 2020 +0000
@@ -1,82 +1,874 @@
#include "mbed.h"
#include "GT511C3.hpp"
-
-Serial debug(USBTX,USBRX);
-
+#include "N5110.h"
+N5110 N5110(PTC9,PTC0,PTC7,PTD2,PTD1,PTC11);
+Serial serial(USBTX, USBRX);
DigitalOut myled(LED1);
-GT511C3 finger(p9,p10);
-
+GT511C3 GT511C3(PTC17,PTC16);
+
+void Clock();
+void EnrollFP1();
+void EnrollFP2();
+void EnrollFP3();
+void EnrollFP4();
+void EnrollFP5();
+void EnrollFP6();
+void EnrollFP7();
+void EnrollFP8();
+void EnrollFP9();
+void IDSelect();
+int clkcheck1;
+int clkcheck2;
+int clkcheck3;
+int clkcheck4;
+int clkcheck5;
+int clkcheck6;
+int clkcheck7;
+int clkcheck8;
+int clkcheck9;
+int UserIDDetect;
+int UserID;
+int select;
+
int progress(int status,char *msg)
{
- debug.printf("%s",msg);
+ serial.printf("%s",msg);
return 0;
}
-
-int main() {
- int sts = 0;
- int ID = 0;
-
- debug.format(8,Serial::None,1);
- debug.baud(115200);
-
- debug.printf("Fingerprint reader module \"GT-511C3 / GT-511C31\" test program.\n");
- debug.printf("Build: %s %s\n",__DATE__,__TIME__);
-
- debug.printf("Open\n");
- sts = finger.Open();
- debug.printf("sts = %d\n",sts);
- if(sts == 0){
- int i;
- debug.printf("FirmwareVersion = %lx\n",finger.FirmwareVersion);
- debug.printf("IsoAreaMaxSize = %ld\n",finger.IsoAreaMaxSize);
- debug.printf("DeviceSerialNumber = ");
- for(i = 0; i < sizeof(finger.DeviceSerialNumber);i++){
- debug.printf("%02X",finger.DeviceSerialNumber[i]);
- }
- debug.printf("\n");
+
+int main()
+{
+ clkcheck1 = 0;
+ clkcheck2= 0;
+ clkcheck3= 0;
+ clkcheck4= 0;
+ clkcheck5= 0;
+ clkcheck6= 0;
+ clkcheck7= 0;
+ clkcheck8= 0;
+ clkcheck9= 0;
+ serial.format(8,Serial::None,1);
+ serial.baud(9600);
+ GT511C3.Open(); //Initialise the Fingerprint Sensor
+ N5110.init(); //Initialise the screen
+ N5110.setContrast(0);
+ N5110.normalMode();
+ N5110.setBrightness(0); //Max Brightness
+ N5110.printString("Biometric",1,1);
+ N5110.printString("Smart",1,2);
+ N5110.printString("Attendance",1,3);
+ N5110.printString("System",1,4);
+ N5110.refresh();
+ wait(4);
+ N5110.clear();
+ N5110.printString("By",10,1);
+ N5110.printString("David Bruce",1,2);
+ N5110.printString("Loading",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.printString("Loading.",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.printString("Loading..",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.printString("Loading...",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.clear();
+ N5110.printString("By",10,1);
+ N5110.printString("David Bruce",1,2);
+ N5110.printString("Loading.",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.printString("Loading..",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.clear();
+ N5110.printString("Press'a' on",1,2); //works with any key, but a is not linked to anything later so stop confusion
+ N5110.printString("the keyboard",1,3);
+ N5110.printString("to continue",1,4);
+ N5110.refresh();
+ wait(0.25);
+ N5110.clear();
+ IDSelect();
}
-
- // Deletes All Fingerprints enrolled in the database
- debug.printf("Deleting IDs = %d\n", finger.DeleteAllIDs());
-
- // How to create and download a template from the scanner
- // Setting the enrollID to -1 tells the scanner to not save the template but
- // instead to send the data to the host.
- int EnrollID = -1;
- // The size of one template
- unsigned char data[498];
- // Create a template with the scanner
- finger.Enroll(EnrollID,progress);
- // Receive the template from the scanner
- debug.printf("RecvData = %d\n", finger.RecvData(data, 498));
- debug.printf("Data[0-3] = %X %X %X %X\n", data[0], data[1],data[2],data[3]);
+
+void IDSelect(){
+ while(1){
+ char c = serial.getc();
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("To do so",1,1);
+ N5110.printString("select a no.",1,2);
+ N5110.printString("from 1-9 on",1,3);
+ N5110.printString("your keyboard. Use",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ serial.printf("%s",select);
- // Since we have a template we want to enroll in the database
- // We call SetTemplate which will upload the template to the scanner
- // 11 is the ID that this template will be enrolled in
- debug.printf("SetTemplate = %d\n", finger.SetTemplate(11,data,498));
+ if(c == '1') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 1 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 1;
+ }
+
+ if(c == '2') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 2 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 2;
+ }
+
+ if(c == '3') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 3 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 3;
+ }
+
+ if(c == '4') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 4 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 4;
+ }
+
+ if(c == '5') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 5 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 5;
+ }
+
+ if(c == '6') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 6 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 6;
+ }
+
+ if(c == '7') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 7 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 7;
+ }
+
+ if(c == '8') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 8 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 8;
+ }
+
+ if(c == '9') {
+ N5110.clear();
+ N5110.printString("Select ID:",1,0);
+ N5110.printString("..... 9 .....",1,1);
+ N5110.printString("Press the letter",1,4);
+ N5110.printString("'e' to confirm",1,5);
+ N5110.refresh();
+ select = 9;
+ }
+
+ if((select == 1) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 1.....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP1();
+ }
+
+ if((select == 2) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 2 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP2();
+ }
+
+ if((select == 3) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 3 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP3();
+ }
+
+ if((select == 4) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 4 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP4();
+ }
+
+ if((select == 5) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 5 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP5();
+ }
+
+ if((select == 6) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 6 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP6();
+ }
+
+ if((select == 7) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 7 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP7();
+ }
+
+ if((select == 8) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 8 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP8();
+ }
+
+ if((select == 9) && (c == 'e')) {
+ N5110.clear();
+ N5110.printString("ID Selected:",1,0);
+ N5110.printString("..... 9 .....",1,1);
+ N5110.refresh();
+ wait(4);
+ EnrollFP9();
+ }
+}
+}
+
+void EnrollFP1(){
+
+ if(1){
+ int UserID = 1; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP2(){
+
+ if(1){
+ int UserID = 2;// Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP3(){
+
+ if(1){
+ int UserID = 3; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP4(){
+
+ if(1){
+ int UserID = 4; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP5(){
+
+ if(1){
+ int UserID = 5; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP6(){
+
+ if(1){
+ int UserID = 6; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
-
- // Turn on the scanner backlight so we can get good captures
- // during identification testing
- finger.CmosLed(1);
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP7(){
+
+ if(1){
+ int UserID = 7; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP8(){
+
+ if(1){
+ int UserID = 8; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void EnrollFP9(){
+
+ if(1){
+ int UserID = 9; // Need to get this value from keyboard
+ if(GT511C3.CheckEnrolled(UserID) == 0) { //If the User has previously been enrolled
+ if(GT511C3.DeleteID(UserID) == 0){};//Delete User ID
+ }
+
+ N5110.clear();
+ N5110.printString("Place your",1,0);
+ N5110.printString("finger on the",1,1);
+ N5110.printString("sensor and",1,2);
+ N5110.printString("remove it. Do",1,3);
+ N5110.printString("until it is",1,4);
+ N5110.printString("enrolled",1,5); //Instructions
+ N5110.refresh();
+
+ GT511C3.Enroll(UserID,progress); //Enroll User with UserID of 1
+
+ if(GT511C3.CheckEnrolled(UserID) == 0) {
+ N5110.clear();
+ N5110.printString("Successfully",1,1);
+ N5110.printString("Enrolled",1,2);
+ N5110.refresh();
+ wait(2); //If UserID is enrolled, print "Successfully Enrolled" on N5110 screen
+
+ GT511C3.CmosLed(1);
+ Clock(); //Run Clock() This is seperate due to it being triggered in two places in the "register once, rebootable" version.
+ }
+ }
+ }
+
+void Clock(){ //This part of the code identifies the fingerprint, checks if it is enrolled and if so whether they are clocking in or clocking out
while(1) {
- debug.printf("Press finger for Identify\n");
- // Wait for a finger on the scanner
- finger.WaitPress(1);
- // Wait until we get a good capture
- if(finger.Capture(1) != 0)
- continue;
+ int reset = 0;
+ N5110.clear();
+ N5110.printString("Scan Finger to",1,2);
+ N5110.printString("Clock In/Out",1,3);
+ N5110.refresh();
+
+
+ GT511C3.WaitPress(1); //Code waits for a press
+ if(GT511C3.Capture(1) != 0) continue; //Makes sure the scan of the fingerprint is a good one
+ UserIDDetect = GT511C3.Identify(); //Detects the UserID of the press
+
+
+ if (UserIDDetect ==-1) { //If -1, it is not registered
+ N5110.clear();
+ N5110.printString("Fingerprint",1,0);
+ N5110.printString("Not Recognised",1,1);
+ N5110.refresh();
+ wait(3);
+ };
+
+ if ((UserIDDetect == 1) && (clkcheck1 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 1",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:1");
+ N5110.refresh();
+ clkcheck1 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 1) && (clkcheck1 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 1",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:1");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck1 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 2) && (clkcheck2 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 2",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:2");
+ N5110.refresh();
+ clkcheck2 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 2) && (clkcheck2 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 2",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:2");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck2 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 3) && (clkcheck3 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
- // Now that we have a good capute identify the finger
- ID = finger.Identify();
+ N5110.printString("User 3",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:3");
+ N5110.refresh();
+ clkcheck3 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 3) && (clkcheck3 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 3",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:3");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck3 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 4) && (clkcheck4 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 4",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:4");
+ N5110.refresh();
+ clkcheck4 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 4) && (clkcheck4 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 4",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:4");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck4 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 5) && (clkcheck5 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 5",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:5");
+ N5110.refresh();
+ clkcheck5 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 5) && (clkcheck5 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 5",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:5");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck5 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 6) && (clkcheck6 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 6",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:6");
+ N5110.refresh();
+ clkcheck6 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
- // If you used the same finger this should return 11
- // Otherwise this will return -1
- debug.printf("ID = %d\n",ID);
- debug.printf("Remove finger\n");
+ if ((UserIDDetect == 6) && (clkcheck6 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 6",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:6");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck6 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 7) && (clkcheck7 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 7",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:7");
+ N5110.refresh();
+ clkcheck7 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 7) && (clkcheck7 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 7",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:7");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck7 = 0;
+ reset = 1;
+ wait(3);
+ };
- // Wait until the finger is removed so we don't double identify a finger
- finger.WaitPress(0);
+ if ((UserIDDetect == 8) && (clkcheck8 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 8",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:8");
+ N5110.refresh();
+ clkcheck8 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 8) && (clkcheck8 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 8",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:8");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck8 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ if ((UserIDDetect == 9) && (clkcheck9 == 0) && (reset == 0)){//If 1, it is the registered print, clkcheck 0 means the last action was a clock out
+ N5110.clear();
+
+ N5110.printString("User 9",1,1);
+ N5110.printString("Clocked in",1,2);
+ serial.printf("Clocked in" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:9");
+ N5110.refresh();
+ clkcheck9 = -1;
+ reset = 1;//Clock in and out both require reset 0, and both change reset to 1 for 3 seconds to stop the code automaticlaly switching between both while UserIDDetect = 1
+ wait(3);
+ };
+
+
+ if ((UserIDDetect == 9) && (clkcheck9 == -1) && (reset == 0)){
+ N5110.clear();
+
+ N5110.printString("User 9",1,1);
+ N5110.printString("Clocked Out",1,2);
+ serial.printf("Clocked Out" __DATE__);
+ serial.printf("Time:"__TIME__);
+ serial.printf("User:9");
+ N5110.refresh();
+
+ N5110.refresh();
+ clkcheck9 = 0;
+ reset = 1;
+ wait(3);
+ };
+
+ GT511C3.WaitPress(0); //Code waits for no press before looping
}
-}
\ No newline at end of file
+}