MMA7455
Fork of C027_Support by
MDM.h
- Committer:
- mazgch
- Date:
- 2014-05-13
- Revision:
- 63:42cb563a25bc
- Parent:
- 59:382695f1ce85
- Child:
- 66:69072b3c5bca
File content as of revision 63:42cb563a25bc:
#pragma once #include "mbed.h" #include <stdarg.h> #include "Pipe.h" #include "SerialPipe.h" #ifdef TARGET_UBLOX_C027 // if we detect the C027 platform we will assign the // default pinname and baudrate in the constructor // this helper macro will be used. #define _C027DEFAULT(name) = name #else #define _C027DEFAULT(name) #endif /** basic modem parser class */ class MDMParser { public: //! Constructor MDMParser(); //! get static instance static MDMParser* getInstance() { return inst; }; // ---------------------------------------------------------------- // Types // ---------------------------------------------------------------- //! MT Device Types typedef enum { DEV_UNKNOWN, DEV_SARA_G350, DEV_LISA_U200, DEV_LISA_C200 } Dev; //! SIM Status typedef enum { SIM_UNKNOWN, SIM_PIN, SIM_READY } Sim; //! SIM Status typedef enum { LPM_DISABLED, LPM_ENABLED, LPM_ACTIVE, LPM_SLEEP } Lpm; //! Device status typedef struct { Dev dev; //!< Device Type Lpm lpm; //!< Power Saving Sim sim; //!< SIM Card Status char ccid[20+1]; //!< Integrated Circuit Card ID char imsi[15+1]; //!< International Mobile Station Identity char imei[15+1]; //!< International Mobile Equipment Identity char meid[18+1]; //!< Mobile Equipment IDentifier char manu[16]; //!< Manufacturer (u-blox) char model[16]; //!< Model Name (LISA-U200, LISA-C200 or SARA-G350) char ver[16]; //!< Software Version } DevStatus; //! Registration Status typedef enum { REG_UNKNOWN, REG_DENIED, REG_NONE, REG_HOME, REG_ROAMING } Reg; //! Access Technology typedef enum { ACT_UNKNOWN, ACT_GSM, ACT_EDGE, ACT_UTRAN, ACT_CDMA } AcT; //! Network Status typedef struct { Reg reg; //!< Registration Status AcT act; //!< Access Technology int rssi; //!< Received Signal Strength Indication (in dBm, range -113..-53) int ber; //!< Bit Error Rate (BER), see 3GPP TS 45.008 [20] subclause 8.2.4 char opr[16+1]; //!< Operator Name char num[32]; //!< Mobile Directory Number unsigned short lac; //!< location area code in hexadecimal format (2 bytes in hex) unsigned int ci; //!< Cell ID in hexadecimal format (2 to 4 bytes in hex) } NetStatus; //! An IP v4 address typedef uint32_t IP; #define NOIP ((MDMParser::IP)0) //!< No IP address // ip number formating and conversion #define IPSTR "%d.%d.%d.%d" #define IPNUM(ip) ((ip)>>24)&0xff, \ ((ip)>>16)&0xff, \ ((ip)>> 8)&0xff, \ ((ip)>> 0)&0xff #define IPADR(a,b,c,d) ((((IP)(a))<<24) | \ (((IP)(b))<<16) | \ (((IP)(c))<< 8) | \ (((IP)(d))<< 0)) // ---------------------------------------------------------------- // Device // ---------------------------------------------------------------- /** Combined Init, checkNetStatus, join suitable for simple applications \param simpin a optional pin of the SIM card \param apn the of the network provider e.g. "internet" or "apn.provider.com" \param username is the user name text string for the authentication phase \param password is the password text string for the authentication phase \param dump set to true if you like to dump the status if successful \return true if successful, false otherwise */ bool connect(const char* simpin, const char* apn, const char* username, const char* password, bool dump); /** register (Attach) the MT to the GPRS service. \param simpin a optional pin of the SIM card \param status an optional struture to with device information \return true if successful, false otherwise */ bool init(const char* simpin = NULL, DevStatus* status = NULL); /** check if the network is available \param status an optional structure to with network information \return true if successful and connected to network, false otherwise */ bool checkNetStatus(NetStatus* status = NULL); /** Power off the MT, This function has to be called prior to switching off the supply. \return true if successfully, false otherwise */ bool powerOff(void); // ---------------------------------------------------------------- // Data Connection (GPRS) // ---------------------------------------------------------------- /** register (Attach) the MT to the GPRS service. \param apn the of the network provider e.g. "internet" or "apn.provider.com" \param username is the user name text string for the authentication phase \param password is the password text string for the authentication phase \param dump set to true if you like to dump the status if successful \return the ip that is assigned */ MDMParser::IP join(const char* apn = NULL, const char* username = NULL, const char* password = NULL); /** deregister (detach) the MT from the GPRS service. \return true if successful, false otherwise */ bool disconnect(void); /** Translates a domain name to an IP address \param host the domain name to translate e.g. "u-blox.com" \return the IP if successful, 0 otherwise */ MDMParser::IP gethostbyname(const char* host); // ---------------------------------------------------------------- // Sockets // ---------------------------------------------------------------- //! Type of IP protocol typedef enum { IPPROTO_TCP, IPPROTO_UDP } IpProtocol; //! Socket error return codes #define SOCKET_ERROR -1 /** Create a socket for a ip protocol (and optionaly bind) \param ipproto the protocol (UDP or TCP) \param port in case of UDP, this optional port where it is bind \return the socket handle if successful or SOCKET_ERROR on failure */ int socketSocket(IpProtocol ipproto, int port = -1); /** make a socket connection \param socket the socket handle \param host the domain name to connect e.g. "u-blox.com" \param port the port to connect \return true if successfully, false otherwise */ bool socketConnect(int socket, const char* host, int port); /** make a socket connection \param socket the socket handle \return true if connected, false otherwise */ bool socketIsConnected(int socket); /** Get the number of bytes pending for reading for this socket \param socket the socket handle \param timeout_ms -1 blocking, else non blocking timeout in ms \return 0 if successful or SOCKET_ERROR on failure */ bool socketSetBlocking(int socket, unsigned int timeout_ms); /** Write socket data \param socket the socket handle \param buf the buffer to write \param len the size of the buffer to write \return the size written or SOCKET_ERROR on failure */ int socketSend(int socket, const char * buf, int len); /** Write socket data to a IP \param socket the socket handle \param ip the ip to send to \param port the port to send to \param buf the buffer to write \param len the size of the buffer to write \return the size written or SOCKET_ERROR on failure */ int socketSendTo(int socket, IP ip, int port, const char * buf, int len); /** Get the number of bytes pending for reading for this socket \param socket the socket handle \return the number of bytes pending or SOCKET_ERROR on failure */ int socketReadable(int socket); /** Read this socket \param socket the socket handle \param buf the buffer to read into \param len the size of the buffer to read into \return the number of bytes read or SOCKET_ERROR on failure */ int socketRecv(int socket, char* buf, int len); /** Read from this socket \param socket the socket handle \param ip the ip of host where the data originates from \param port the port where the data originates from \param buf the buffer to read into \param len the size of the buffer to read into \return the number of bytes read or SOCKET_ERROR on failure */ int socketRecvFrom(int socket, IP* ip, int* port, char* buf, int len); /** Close a connectied socket (that was connected with #socketConnect) \param socket the socket handle \return true if successfully, false otherwise */ bool socketClose(int socket); /** Free the socket (that was allocated before by #socketSocket) \param socket the socket handle \return true if successfully, false otherwise */ bool socketFree(int socket); // ---------------------------------------------------------------- // SMS Short Message Service // ---------------------------------------------------------------- /** count the number of sms in the device and optionally return a list with indexes from the storage locations in the device. \param stat what type of messages you can use use "REC UNREAD", "REC READ", "STO UNSENT", "STO SENT", "ALL" \param ix list where to save the storage positions \param num number of elements in the list \return the number of messages, this can be bigger than num, -1 on failure */ int smsList(const char* stat = "ALL", int* ix = NULL, int num = 0); /** Read a Message from a storage position \param ix the storage position to read \param num the originator address (~16 chars) \param buf a buffer where to save the sm \param len the length of the sm \return true if successful, false otherwise */ bool smsRead(int ix, char* num, char* buf, int len); /** Send a message to a recipient \param ix the storage position to delete \return true if successful, false otherwise */ bool smsDelete(int ix); /** Send a message to a recipient \param num the phone number of the recipient \param buf the content of the message to sent \return true if successful, false otherwise */ bool smsSend(const char* num, const char* buf); // ---------------------------------------------------------------- // USSD Unstructured Supplementary Service Data // ---------------------------------------------------------------- /** Read a Message from a storage position \param cmd the ussd command to send e.g "*#06#" \param buf a buffer where to save the reply \return true if successful, false otherwise */ bool ussdCommand(const char* cmd, char* buf); // ---------------------------------------------------------------- // DUMP status to standard out (printf) // ---------------------------------------------------------------- /** dump the device status to stdout using printf \param status the status to convert to textual form, unavailable fields are ommited (not printed) */ static void dumpDevStatus(MDMParser::DevStatus *status); /** dump the network status to stdout using printf \param status the status to convert to textual form, unavailable fields are ommited (not printed) */ static void dumpNetStatus(MDMParser::NetStatus *status); /** dump the ip address to stdout using printf \param ip the ip to convert to textual form, unavailable fields are ommited (not printed) */ static void dumpIp(MDMParser::IP ip); // ---------------------------------------------------------------- // Parseing // ---------------------------------------------------------------- enum { // waitFinalResp Responses NOT_FOUND = 0, WAIT = -1, // TIMEOUT RESP_OK = -2, RESP_ERROR = -3, RESP_PROMPT = -4, // getLine Responses #define LENGTH(x) (x & 0x00FFFF) //!< extract/mask the length #define TYPE(x) (x & 0xFF0000) //!< extract/mask the type TYPE_UNKNOWN = 0x000000, TYPE_OK = 0x110000, TYPE_ERROR = 0x120000, TYPE_RING = 0x210000, TYPE_CONNECT = 0x220000, TYPE_NOCARRIER = 0x230000, TYPE_NODIALTONE = 0x240000, TYPE_BUSY = 0x250000, TYPE_NOANSWER = 0x260000, TYPE_PROMPT = 0x300000, TYPE_PLUS = 0x400000, TYPE_TEXT = 0x500000 }; /** Get a line from the physical interface. This function need to be implemented in a inherited class. Usually just calls #_getLine on the rx buffer pipe. \param buf the buffer to store it \param buf size of the buffer \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ virtual int getLine(char* buf, int len) = 0; /** Write data to the device \param buf the buffer to write \param buf size of the buffer to write \return bytes written */ virtual int send(const char* buf, int len); /** Write formated date to the physical interface (printf style) \param fmt the format string \param .. variable arguments to be formated \return bytes written */ int sendFormated(const char* format, ...); /** callback function for #waitFinalResp with void* as argument \param type the #getLine response \param buf the parsed line \param len the size of the parsed line \param param the optional argument passed to #waitFinalResp \return WAIT if processing should continue, any other value aborts #waitFinalResp and this retunr value retuned */ typedef int (*_CALLBACKPTR)(int type, const char* buf, int len, void* param); /** Wait for a final respons \param cb the optional callback function \param param the optional callback function parameter \param timeout_ms the timeout to wait (See Estimated command response time of AT manual) */ int waitFinalResp(_CALLBACKPTR cb = NULL, void* param = NULL, int timeout_ms = 10000); /** template version of #waitFinalResp when using callbacks, This template will allow the compiler to do type cheking but internally symply casts the arguments and call the (void*) version of #waitFinalResp. \sa waitFinalResp */ template<class T> int waitFinalResp(int (*cb)(int type, const char* buf, int len, T* param), T* param, int timeout_ms = 10000) { return waitFinalResp((_CALLBACKPTR)cb, (void*)param, timeout_ms); } protected: /** Write bytes to the physical interface. This function should be implemented in a inherited class. \param buf the buffer to write \param buf size of the buffer to write \return bytes written */ virtual int _send(const void* buf, int len) = 0; /** Helper: Parse a line from the receiving buffered pipe \param pipe the receiving buffer pipe \param buf the parsed line \param len the size of the parsed line \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ static int _getLine(Pipe<char>* pipe, char* buffer, int length); /** Helper: Parse a match from the pipe \param pipe the buffered pipe \param number of bytes to parse at maximum, \param sta the starting string, NULL if none \param end the terminating string, NULL if none \return size of parsed match */ static int _parseMatch(Pipe<char>* pipe, int len, const char* sta, const char* end); /** Helper: Parse a match from the pipe \param pipe the buffered pipe \param number of bytes to parse at maximum, \param fmt the formating string (%d any number, %c any char of last %d len) \return size of parsed match */ static int _parseFormated(Pipe<char>* pipe, int len, const char* fmt); protected: // parsing callbacks for different AT commands and their parameter arguments static int _cbString(int type, const char* buf, int len, char* str); static int _cbInt(int type, const char* buf, int len, int* val); // device static int _cbATI(int type, const char* buf, int len, Dev* dev); static int _cbCPIN(int type, const char* buf, int len, Sim* sim); static int _cbCCID(int type, const char* buf, int len, char* ccid); // network static int _cbCSQ(int type, const char* buf, int len, NetStatus* status); static int _cbCOPS(int type, const char* buf, int len, NetStatus* status); static int _cbCNUM(int type, const char* buf, int len, char* num); static int _cbCGATT(int type, const char* buf, int len, int* state); // sockets static int _cbCMIP(int type, const char* buf, int len, IP* ip); static int _cbUPSND(int type, const char* buf, int len, int* act); static int _cbUPSND(int type, const char* buf, int len, IP* ip); static int _cbUDNSRN(int type, const char* buf, int len, IP* ip); static int _cbUSOCR(int type, const char* buf, int len, int* socket); static int _cbUSORD(int type, const char* buf, int len, char* out); typedef struct { char* buf; IP ip; int port; } USORFparam; static int _cbUSORF(int type, const char* buf, int len, USORFparam* param); typedef struct { char* buf; char* num; } CMGRparam; static int _cbCUSD(int type, const char* buf, int len, char* buf); // sms typedef struct { int* ix; int num; } CMGLparam; static int _cbCMGL(int type, const char* buf, int len, CMGLparam* param); static int _cbCMGR(int type, const char* buf, int len, CMGRparam* param); // variables DevStatus _dev; //!< collected device information NetStatus _net; //!< collected network information IP _ip; //!< assigned ip address // management struture for sockets typedef enum { SOCK_FREE, SOCK_CREATED, SOCK_CONNECTED } SockState; typedef struct { SockState state; int pending; unsigned int timeout_ms; } SockCtrl; // LISA-C has 6 TCP and 6 UDP sockets starting at index 18 // LISA-U and SARA-G have 7 sockets starting at index 1 SockCtrl _sockets[32]; static MDMParser* inst; }; // ----------------------------------------------------------------------- /** modem class which uses a serial port as physical interface. */ class MDMSerial : public SerialPipe, public MDMParser { public: /** Constructor \param tx is the serial ports transmit pin (modem to CPU) \param rx is the serial ports receive pin (CPU to modem) \param baudrate the baudrate of the modem use 115200 \param rts is the serial ports ready to send pin (CPU to modem) this pin is optional \param cts is the serial ports clear to send pin (modem to CPU) this pin is optional, but required for power saving to be enabled \param rxSize the size of the serial rx buffer \param txSize the size of the serial tx buffer */ MDMSerial(PinName tx _C027DEFAULT(MDMTXD), PinName rx _C027DEFAULT(MDMRXD), int baudrate _C027DEFAULT(MDMBAUD), #if DEVICE_SERIAL_FC PinName rts _C027DEFAULT(MDMRTS), PinName cts _C027DEFAULT(MDMCTS), #endif int rxSize = 256 , int txSize = 128 ); /** Get a line from the physical interface. \param buf the buffer to store it \param buf size of the buffer \return type and length if something was found, WAIT if not enough data is available NOT_FOUND if nothing was found */ virtual int getLine(char* buffer, int length); protected: /** Write bytes to the physical interface. \param buf the buffer to write \param buf size of the buffer to write \return bytes written */ virtual int _send(const void* buf, int len); }; // ----------------------------------------------------------------------- //#define HAVE_MDMUSB #ifdef HAVE_MDMUSB class MDMUsb : /*public UsbSerial,*/ public MDMParser { public: MDMUsb(void); virtual int getLine(char* buffer, int length); protected: virtual int _send(const void* buf, int len); }; #endif