joey shelton
/
OT07_I2C_GUI_Firmware
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependencies: SDFileSystem max32630fthr USBDevice
Fork of
FTHR_SD_Demo
by 
Maxim Integrated
main.cpp
- Committer:
- cyberjoey
- Date:
- 2018-07-03
- Revision:
- 13:674c647d12dd
- Parent:
- 12:aa9fff0aec91
- Child:
- 14:480f2398fe6a
File content as of revision 13:674c647d12dd:
#include "mbed.h"
#include "SDFileSystem.h"
#include "max32630fthr.h"
#include "USBSerial.h"
#include <ctype.h>
#define I2C_ADDRESS 0x30 // DS2484 I2C address
#define DS2484_ADD 0x30 // DS2484 I2C write address
#define PERIOD 10 // Logging period in seconds
//DS2484 Status register bits
#define OWB 0x01 // status reg, One Wire Busy
#define PPD 0x02 // status reg, Presence Pulse Detected
#define SD 0x04 // status reg, Short Detected
#define LL 0x08 // status reg, Logic Level
#define RST 0x10 // status reg, Device Reset (DS2484 Reset)
#define SBR 0x20 // status reg, Single Bit Result
#define TSB 0x40 // status reg, Triplet Second Bit
#define DIR 0x80 // status reg, Branch Direction Taken
//DS2484 Command bytes
#define RESET 0xF0 // DS2484 Reset
#define SRP 0xE1 // DS2484 Set Read Pointer
#define WDC 0xD2 // DS2484 Write Device Configuration
#define ACP 0xC3 // DS2484 Adjust one wire Control Port
#define OW_RESET 0xB4 // DS2484 One Wire Reset
#define OW_SB 0x87 // One Wire Single Bit (write or read)
#define OWWB 0xA5 // One Wire Write Byte
#define OWRB 0x96 // One Wire Read Byte
#define OWT 0x78 // One Wire Triplet (read 2 bits, write 1 bit)
//One Wire Commands
#define OW_SEARCH 0xF0 // Search Rom
#define OW_READ 0x33 // Read Rom
#define OW_MATCH 0x55 // Match Rom
#define OW_SKIP 0xCC // Skip Rom
#define OW_OD_MATCH 0x69 // Match Rom
#define OW_OD_SKIP 0x3C // Skip Rom
#define OW_ALARM 0xEC // Alarm Search
// OT07 OW commands
#define OT07_OW_CONVERT 0x44 //OT07 OW convert temperature command
#define OT07_OW_WRITE 0xCC // OT07 OW Write Register command
#define OT07_OW_READ 0x33 // OT07 OW Read Register command
#define OT07_OW_RESET 0x82 // OT07 OW Soft Reset command
//OT07 Registers
#define OT07_STATUS 0x00 // OT07 status regiter
#define OT07_INT_EN 0x01 // OT07 Interrupt Enable
#define OT07_FIFO_W 0x04 // OT07 FIFO Write Pointer
#define OT07_FIFO_R 0x05 // OT07 FIFO Read Pointer
#define OT07_FIFO_OF 0x06 // OT07 FIFO Overflow Counter
#define OT07_FIFO_COUNT 0x07 // OT07 FIFO Data Count
#define OT07_FIFO_DATA 0x08 // OT07 FIFO Data
#define OT07_FIFO_CNFG1 0x09 // OT07 FIFO Configuration 1 (FIFO_A_FULL)
#define OT07_FIFO_CNFG2 0x0A // OT07 FIFO Configuration 2
#define OT07_SYS 0x0C // OT07 System Configuration
#define OT07_ALARM_HIGH_MSB 0x10 // OT07 Alarm High MSB
#define OT07_ALARM_HIGH_LSB 0x11 // OT07 Alarm High LSB
#define OT07_ALARM_LOW_MSB 0x12 // OT07 Alarm Low MSB
#define OT07_ALARM_LOW_LSB 0x13 // OT07 Alarm LOW LSB
#define OT07_ADC_BITS 0x14 // OT07 Temp Seneor Setup (ADC_RES[7:6])
#define OT07_GPIO_SETUP 0x20 // OT07 GPIO Setup, sets GPIO modes
#define Ot07_GPIO_CTRL 0x21 // OT07 GPIO control
#define OT07_ROM_ID 0x30 // OT07 ROM_ID address of LSB?
#define MAX_DEVICES 64 // Maximum number of rom devices allowed
#define ID_LENGTH 8 // Rom ID length in bytes
#define BS 8 // ASCII Back Space
#define CR 13 // ASCII Carriage Return
const char* settings_file = "/sd/settings.txt";
const char* log_file = "/sd/MAX30207Log.csv";
//global variable
//******************** init Feather Boared Hardware ***********************
MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
//microSD logging file system setup
SDFileSystem sd(P0_5, P0_6, P0_4, P0_7, "sd"); // mosi, miso, sclk, cs
//SD card insertion detection pin
DigitalIn SDDetect(P2_2, PullUp);
InterruptIn SDInsert(P2_2);
// Virtual serial port over USB
USBSerial pc(0x0B6A, 0x0042, 0x0001, true);
// I2C setup
I2C i2c(P3_4,P3_5); // P3_4 -> I2C1_SDA, P3_5-> I2C1_SCL
//Timer setup
Ticker timer_1; // timer for blinking led heartbeat
bool tick_flag; // used for counting seconds
bool log_flag = false;
bool led_toggle_flag = false;
bool button_flag = false;
bool sd_insert_flag = false;
bool error_flag;
int error_ticks;
//LED blink setup
DigitalOut rLED(LED1);
DigitalOut gLED(LED2);
DigitalOut bLED(LED3);
InterruptIn button(SW1);
void LED_blink_callback(){ // LED Heart beat
led_toggle_flag = !led_toggle_flag;
if(log_flag) //if logging
{
if(led_toggle_flag)
{
//toggle red led
rLED = LED_ON;
}
else
{
rLED = LED_OFF;
gLED = LED_OFF;
bLED = LED_OFF;
}
}
else if(error_flag) //if error (no sd card)
{
if(led_toggle_flag)
{
//toggle red led
rLED = LED_ON;
gLED = LED_ON;
}
else
{
rLED = LED_OFF;
gLED = LED_OFF;
bLED = LED_OFF;
}
error_ticks--;
if(error_ticks <= 0)
error_flag = false;
}
else
{
if(led_toggle_flag)
{
//toggle teal leds
gLED = LED_ON;
bLED = LED_ON;
}
else
{
rLED = LED_OFF;
gLED = LED_OFF;
bLED = LED_OFF;
}
}
tick_flag = true;
}
void btn_pressed() //button pressed isr
{
button_flag = true;
}
void sd_insert() //sd_insert pressed isr
{
sd_insert_flag = true;
}
// *****************************************************************************
// Define CRC-8 Table
// *****************************************************************************
static unsigned char crc_table[] = {
0, 94,188,226, 97, 63,221,131,194,156,126, 32,163,253, 31, 65,
157,195, 33,127,252,162, 64, 30, 95, 1,227,189, 62, 96,130,220,
35,125,159,193, 66, 28,254,160,225,191, 93, 3,128,222, 60, 98,
190,224, 2, 92,223,129, 99, 61,124, 34,192,158, 29, 67,161,255,
70, 24,250,164, 39,121,155,197,132,218, 56,102,229,187, 89, 7,
219,133,103, 57,186,228, 6, 88, 25, 71,165,251,120, 38,196,154,
101, 59,217,135, 4, 90,184,230,167,249, 27, 69,198,152,122, 36,
248,166, 68, 26,153,199, 37,123, 58,100,134,216, 91, 5,231,185,
140,210, 48,110,237,179, 81, 15, 78, 16,242,172, 47,113,147,205,
17, 79,173,243,112, 46,204,146,211,141,111, 49,178,236, 14, 80,
175,241, 19, 77,206,144,114, 44,109, 51,209,143, 12, 82,176,238,
50,108,142,208, 83, 13,239,177,240,174, 76, 18,145,207, 45,115,
202,148,118, 40,171,245, 23, 73, 8, 86,180,234,105, 55,213,139,
87, 9,235,181, 54,104,138,212,149,203, 41,119,244,170, 72, 22,
233,183, 85, 11,136,214, 52,106, 43,117,151,201, 74, 20,246,168,
116, 42,200,150, 21, 75,169,247,182,232, 10, 84,215,137,107, 53};
// -----------------------------------------------------------------------------
// Calculate the CRC8 of the byte value provided with the current total
// calc_crc8(unsigned char, unsigned char) crc8 total, byte to add
// pass crc8 total = 0 to start new crc sum.
// Returns new crc8 total
// -----------------------------------------------------------------------------
unsigned char calc_crc8(unsigned char crc8, unsigned char value){
return crc_table[crc8 ^ value];
}
// *****************************************************************************
// OW_reset()
// returns 0 no device present, 1 device present
// *****************************************************************************
int OW_reset(){
char data[2]; // define as minimun array size so 'data' is a pointer
data[0] = OW_RESET; // One Wire Reset 0xB4
i2c.write(DS2484_ADD,data,1,0); // write reset command to DS2484
wait_ms(1);
do{ // poll OW-busy
i2c.read(DS2484_ADD,data,1); // read back status byte from DS2484
}while(OWB & data[0]);
if(PPD & data[0])return 1; // Presence Pulse Detected bit true?
return 0; // else
} // end OW_reset()
// *****************************************************************************
// OW_write_byte(char) takes char to send over one wire
// returns DS2484 status byte
// *****************************************************************************
char OW_write_byte(char byte){
char data[2];
data[0] = 0xA5;
data[1] = byte;
i2c.write(DS2484_ADD,data,2,1);
i2c.read(DS2484_ADD,data,1); // read status byte
// db.printf("[%02X]",byte);
wait_us(700); // assumes normal speed OW write
return data[0]; // return DS2484 Status byte
}// end OW_write_byte()
// *****************************************************************************
// OW_read_byte(char *, int) char* (save data pointer)
// int (number of bytes to read)
// returns 0x00
//
// assumes OW_reset, OW_match rom, and OW device register read address already sent.
//
// *****************************************************************************
char OW_read_byte(char* a, int n){
char data[2];
int i;
//read n bytes of data
i=0;
do{
data[0] = OWRB; // send 0x96; DS2484 command, OW read byte
i2c.write(DS2484_ADD,data,1,0);
wait_us(600);
do{
i2c.read(DS2484_ADD,data,1); // read status byte and test OW-busy?
}while(data[0]&0x01 == 1); // status bit[0] set --> OW busy
//get byte from DS2484
data[0] = SRP; // send 0xE1, set read pointer
data[1] = 0xE1; // set read pointer address 0xE1 read OW data
i2c.write(DS2484_ADD,data,2,1);
i2c.read(DS2484_ADD,data,1); // read bytes from OW register
a[i] = data[0];
i++;
//pc.printf("[%02X] ",data[0]);
}while(i<n);
//for(i=0;i<n;i++) db.printf("OW_read_byte - [%2d][%02X]\r\n",i,a[i]);
return 0x00;
}// end OW_read_byte()
// *****************************************************************************
// OW_match_rom(char *) pointer to device_id byte array
// returns 0x00
// assumes OW_reset alread sent
// *****************************************************************************
char OW_match_rom(char *device_id){
int i;
//Match rom
OW_write_byte(OW_MATCH); // send 0x55, match rom command
//send rom code for device
for(i=0;i<8;i++){
OW_write_byte(device_id[i]); //I2C write ow byte
}
return 0x00;
}// end OW_macth_rom
// *****************************************************************************
// search_rom(char *) pointer to start of 2D array rom_id_list
// returns number of devices found
// *****************************************************************************
int search_rom(char rom_id_list[MAX_DEVICES][ID_LENGTH]){ // searches for all device on OW bus, returns # found
int bit_num;
int byte_num;
int last_zero;
int last_discrep;
int search_dir;
int rom_count;
char byte_mask;
int last_device;
int i;
char rom_id[8]; //used in rom search
char data[8];
char crc;
//init for first search only
last_device = 0;
last_discrep = 0;
rom_count = 0;
for(i=0;i<8;i++)rom_id[i] = 0x00; //clear rom_id
do{ // loop for each rom search (end when last_device = 1)
//init variable for each search
bit_num = 1;
byte_num = 0;
byte_mask = 1;
last_zero = 0;
//OW reset
if(OW_reset()){ //returns 1 if at least one device present
//test if last device found
if(last_device!=1){ // more devices to find
search_dir = 0;
OW_write_byte(OW_SEARCH); //send 0xF0 over one wire to init search rom
do{
//determine search direction
if(bit_num < last_discrep){ //before last discrepancy
if((rom_id[byte_num] & byte_mask) > 0){// use last rom path
search_dir = 1; // last path was 1
}else{
search_dir = 0; // last path was 0
}
}else{ // at or past last discrepancy
if(bit_num == last_discrep){ // at last discrepancy
search_dir = 1; //been here before so use 1
}else{
search_dir = 0; //past last discrepancy so use 0
}
}
//write direction bit and get reply
data[0] = 0x78;
data[1] = search_dir << 7; //sets bit 7 of status reg to search_dir
i2c.write(DS2484_ADD,data,2,1);
wait_us(250);
//read in rom_id bits
i2c.read(DS2484_ADD,data,1); // read status byte
//(todo) check for no device error here
//get search direction used by triplet command
if(data[0]&0x80){ //true --> DIR bit = 1
search_dir = 1;
}else{
search_dir = 0;
}
//test for discrepancy (both 0 and 1 present at current bit number)(TSB = 0 (1's present) and SBR = 0 (0's present))
if(!(data[0] & 0x60)){ // true --> discrepancy exist, both TSB and SBR = 0
if(search_dir == 0)last_zero = bit_num;
}
if(search_dir == 1){ // write search dir to rom bit
rom_id[byte_num] |= byte_mask;
}else{
rom_id[byte_num] &= ~byte_mask;
}
//increment bit_num and byte_num if needed
bit_num++;
byte_mask <<= 1; //rotate 1 bit left
if(byte_mask == 0){ //if bit shifts out of byte set byte to 1
byte_num++; //also increnent byt num
byte_mask = 1;
}
}while(bit_num<65); //bit nun started at 1 so end after 64
last_discrep = last_zero;
if(last_discrep == 0)last_device = 1;
//copy rom_id into rom_id_list and calc crc of first 7 bytes
crc = 0x00; // reset crc8 total to 0
for(i=7;i>=0;i--){
rom_id_list[rom_count][i] = rom_id[i];
}
//clac_crc of rom ID
for (i=0;i<7;i++){
crc = calc_crc8(crc, rom_id[i]);
}
rom_count++;
}//if(last_device..)
}else{//if prescent -- if no device present rom count is 0
return 0;
}
}while(last_device == 0);
return rom_count;
}// end search_rom()
// *****************************************************************************
// alarm_search(char *) pointer to start of 2D array rom_id_list
// returns number of devices found with alarm triggered
// *****************************************************************************
int alarm_search(char rom_id_list[MAX_DEVICES][ID_LENGTH]){ // searches for all devices with alarm triggered on OW bus, returns # found
int bit_num;
int byte_num;
int last_zero;
int last_discrep;
int search_dir;
int rom_count;
char byte_mask;
int last_device;
int i;
char rom_id[8]; //used in rom search
char data[8];
char crc;
//init for first search only
last_device = 0;
last_discrep = 0;
rom_count = 0;
for(i=0;i<8;i++)rom_id[i] = 0x00; //clear rom_id
do{ // loop for each rom search (end when last_device = 1)
//init variable for each search
bit_num = 1;
byte_num = 0;
byte_mask = 1;
last_zero = 0;
//OW reset
if(OW_reset()){ //returns 1 if at least one device present
//test if last device found
if(last_device!=1){ // more devices to find
search_dir = 0;
OW_write_byte(OW_ALARM); //send 0xEC over one wire to init alarm search
do{
//determine search direction
if(bit_num < last_discrep){ //before last discrepancy
if((rom_id[byte_num] & byte_mask) > 0){// use last rom path
search_dir = 1; // last path was 1
}else{
search_dir = 0; // last path was 0
}
}else{ // at or past last discrepancy
if(bit_num == last_discrep){ // at last discrepancy
search_dir = 1; //been here before so use 1
}else{
search_dir = 0; //past last discrepancy so use 0
}
}
//write direction bit and get reply
data[0] = 0x78;
data[1] = search_dir << 7; //sets bit 7 of status reg to search_dir
i2c.write(DS2484_ADD,data,2,1);
wait_us(250);
//read in rom_id bits
i2c.read(DS2484_ADD,data,1); // read status byte
//(todo) check for no device error here
//get search direction used by triplet command
if(data[0]&0x80){ //true --> DIR bit = 1
search_dir = 1;
}else{
search_dir = 0;
}
//test for discrepancy (both 0 and 1 present at current bit number)(TSB = 0 (1's present) and SBR = 0 (0's present))
if(!(data[0] & 0x60)){ // true --> discrepancy exist, both TSB and SBR = 0
if(search_dir == 0)last_zero = bit_num;
}
if(search_dir == 1){ // write search dir to rom bit
rom_id[byte_num] |= byte_mask;
}else{
rom_id[byte_num] &= ~byte_mask;
}
//increment bit_num and byte_num if needed
bit_num++;
byte_mask <<= 1; //rotate 1 bit left
if(byte_mask == 0){ //if bit shifts out of byte set byte to 1
byte_num++; //also increnent byt num
byte_mask = 1;
}
}while(bit_num<65); //bit nun started at 1 so end after 64
last_discrep = last_zero;
if(last_discrep == 0)last_device = 1;
//copy rom_id into rom_id_list and calc crc of first 7 bytes
crc = 0x00; // reset crc8 total to 0
for(i=7;i>=0;i--){
rom_id_list[rom_count][i] = rom_id[i];
}
//clac_crc of rom ID
for (i=0;i<7;i++){
crc = calc_crc8(crc, rom_id[i]);
}
rom_count++;
}//if(last_device..)
}else{//if prescent -- if no device present rom count is 0
return 0;
}
}while(last_device == 0);
//check if rom_id from alarm search is all 1s (this means there was a presence pulse but no alarm is triggered)
bool bad_rom_id = true;
for(int i = 0; i < 7; i++)
{
if(rom_id_list[0][i] != 0xFF)
bad_rom_id = false; //found a byte in the rom id that isn't all 1s
}
if(bad_rom_id)
return 0;
return rom_count;
}// end alarm_search()
// ******************** write_OW_register() ********************************
// write_OW_register(char*, int, int, char*)
// char* pointer to rom_id
// int start address
// int number of bytes to write
// char* pointer to write data location
// returns 0 if CRC match data
// returns -1 if CRC does not match data
//
// *****************************************************************************
int write_OW_register(char *device_ID, int start_add, int n, char *data){
int i;
//select device
OW_reset();
OW_match_rom(device_ID);
//set start address
OW_write_byte(OT07_OW_WRITE); // send 0xCC, OW write register command for OT07
OW_write_byte(start_add); // send write register start address
OW_write_byte(n-1); // send length of bytes to write (00-> one byte)
for(i=0;i<n;i++){ // send n bytes of data
OW_write_byte(data[i]);
}
OW_read_byte(data,2); // read 2 byte CRC
// --- todo ----
// calculate CRC of
// Command + length + n bytes sent
// compare with 2 bytes read
return 0;
}//end write_OW_register
// ******************** read_OW_register() ********************************
// read_OW_register(char*, int, int, char*)
// char* pointer to rom_id
// int start address
// int number of bytes to read, not including CRC bytes
// char* pointer to save data location
// returns 0 if CRC match data
// returns -1 if CRC does not match data
//
// *****************************************************************************
int read_OW_register(char *device_ID, int start_add, int n, char *data){
//int i;
//select device
OW_reset();
OW_match_rom(device_ID);
//set start address
OW_write_byte(OT07_OW_READ); // send 0x33, OW read register command for OT07
OW_write_byte(start_add); // send read register start address
OW_write_byte(n-1); // send length of bytes to read (0 -> 1 byte)
OW_read_byte(data,n+2); // read n bytes plus 2 byte CRC
// --- todo ----
// calculate CRC of
// Command + length + n bytes
// compare with last 2 bytes read
return 0;
}//end read_OW_register
int set_test_mode(char *device_id){
char data[4];
// enter test mode
OW_reset();
OW_match_rom(device_id); // match ROM
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0xFF); // device register address
OW_write_byte(0x00); // number of bytes to write -1
OW_write_byte(0x54); // first half of test mode pass code
OW_read_byte(data,2); // read 2 byte CRC
OW_reset();
OW_match_rom(device_id);
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0xFF); // device register address
OW_write_byte(0x00); // number of bytes to write -1
OW_write_byte(0x4D); // second half of test mode pass code
OW_read_byte(data,2); // read 2 byte CRC
// set ADC_ENABLED
OW_reset();
OW_match_rom(device_id);
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0x81); // device register address
OW_write_byte(0x00); // number of bytes to write -1
OW_write_byte(0x04); // ADC_ENABLED code
OW_read_byte(data,2); // read 2 byte CRC
OW_reset();
OW_match_rom(device_id);
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0x98); // device register address
OW_write_byte(0x05); // number of bytes to write -1
OW_write_byte(0x40); // add 98 data 40
OW_write_byte(0xD4); // add 99 data D4
OW_write_byte(0xE0); // add 9A data E0
OW_write_byte(0xB3); // add 9B data B3
OW_write_byte(0x09); // add 9C data 09
OW_write_byte(0xBA); // add 9D data BA
OW_read_byte(data,2); // read 2 byte CRC
//OTP copy
OW_reset();
OW_match_rom(device_id);
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0x80); // device register address
OW_write_byte(0x00); // number of bytes to write -1
OW_write_byte(0x82); //
OW_read_byte(data,2); // read 2 byte CRC
OW_reset();
OW_match_rom(device_id);
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0x80); // device register address
OW_write_byte(0x00); // number of bytes to write -1
OW_write_byte(0x02); //
OW_read_byte(data,2); // read 2 byte CRC
OW_reset();
OW_match_rom(device_id);
OW_write_byte(OT07_OW_WRITE); // device write register command
OW_write_byte(0xFF); // device register address
OW_write_byte(0x00); // number of bytes to write -1
OW_write_byte(0x00); // exit Test mode
OW_read_byte(data,2); // read 2 byte CRC
return 0;
}// end set_test_mode()
// ******************** convert_temperature() ********************************
// convert_temperature()
// returns 0
// dose not block for 0.75 seconds.
// *****************************************************************************
int convert_temperature(){ // convert sent to all OW devices
char data[8];
OW_reset();
OW_write_byte(OW_SKIP); // send 0xCC, skip rom command
// activate strong pullup
data[0] = WDC; // send 0xD2 Write Device Configuration
data[1] = 0xA5; // 1010 0101 b strong and active pullup on
i2c.write(DS2484_ADD,data,2,0);
//convert command
OW_write_byte(OT07_OW_CONVERT); // send 0x44, Convert Temperature
OW_read_byte(data,2); // read 2 byte CRC
return 0;
}
// ******************** convert_temperature() ********************************
// convert_temperature(char *) takes 8 byte rom_id as input
// returns 0
// dose not block for 0.75 seconds.
// *****************************************************************************
int convert_temperature(char *device_id){
char data[8];
OW_reset();
OW_match_rom(device_id); // send device id
// activate strong pullup
data[0] = WDC; // send 0xD2 Write Device Configuration
data[1] = 0xA5; // 1010 0101 b strong and active pullup on
i2c.write(DS2484_ADD,data,2,0);
//convert command
OW_write_byte(OT07_OW_CONVERT); // send 0x44, Convert Temperature
OW_read_byte(data,2); // read 2 byte CRC
return 0;
}
//************************ get_temperature() *********************************
// get_temperature(char *) takes 8 byte rom_id as input
// returns double temperature in oC
//******************************************************************************
double get_temperature(char *device_id){
char t[4];
double T;
int count;
// char data[2];
read_OW_register(device_id,OT07_FIFO_DATA,0x02,t); // Read temperature from FIFO, 2 bytes
//calculate temperture from data
count = (int)(t[0]*256 + t[1]);
if (count >= 32768)count = count - 65536; // 2s comp
T = (double)count*0.005;
return T;
}// end get_temperature()
void write_settings_file(int interval, bool device_logged[MAX_DEVICES])
{
FILE *fp = fopen(settings_file, "w");
if (fp != NULL)
{
fprintf(fp, "i %d\r\n", interval);
fprintf(fp, "d");
for(int i = 0; i < MAX_DEVICES; i++)
{
if(device_logged[i] == true)
{
fprintf(fp," %d", i);
}
}
fprintf(fp,"\r\n");
fclose(fp);
}
return;
}
bool print_settings_file()
{
FILE *fp = fopen(settings_file, "r");
if (fp != NULL)
{
pc.printf("*\r\n");
// Read contents from file
char c = fgetc(fp);
while (!feof(fp))
{
pc.printf("%c", c);
c = fgetc(fp);
}
pc.printf("*\r\n");
fclose(fp);
}
else
{
return false;
}
return true;
}
bool print_log_file()
{
FILE *fp = fopen(log_file, "r");
if (fp != NULL)
{
pc.printf("*\r\n");
// Read contents from file
char c = fgetc(fp);
while (!feof(fp))
{
pc.printf("%c", c);
c = fgetc(fp);
}
pc.printf("*\r\n");
fclose(fp);
}
else
{
return false;
}
return true;
}
int getline(char **lineptr, int *n, FILE *stream) {
char *bufptr = NULL;
char *p = bufptr;
size_t size;
int c;
if (lineptr == NULL) {
return -1;
}
if (stream == NULL) {
return -1;
}
if (n == NULL) {
return -1;
}
bufptr = *lineptr;
size = *n;
c = fgetc(stream);
if (c == EOF) {
return -1;
}
if (bufptr == NULL) {
bufptr = (char *)malloc(128);
if (bufptr == NULL) {
return -1;
}
size = 128;
}
p = bufptr;
while(c != EOF) {
if ((p - bufptr) > (size - 1)) {
size = size + 128;
bufptr = (char *)realloc(bufptr, size);
if (bufptr == NULL) {
return -1;
}
}
*p++ = c;
if (c == '\n') {
break;
}
c = fgetc(stream);
}
*p++ = '\0';
*lineptr = bufptr;
*n = size;
return p - bufptr - 1;
}
//returns true if settings file exists and is in the proper format
bool apply_settings_file(bool (&logged_devices)[MAX_DEVICES], int& interval)
{
char * line = NULL;
int len = 0;
int line_number = 0;
FILE *fp = fopen("/sd/settings.txt", "r");
if (fp != NULL)
{
//initialize devices to all false;
for(int i = 0; i < MAX_DEVICES; i++)
{
logged_devices[i] = false;
}
// Read contents from file
while ((getline(&line, &len, fp)) != -1)
{
line_number++;
char i = 0;
char c = line[i];
while(c != '\0')
{
int number;
int n;
sscanf((line+i), "%d%n", &number, &n);
if(isdigit(c))
{
if(line_number == 1)
{
interval = number;
}
else if(line_number == 2)
{
logged_devices[number] = true;
}
if(n > 1)
i = i + (n - 1);
}
i++;
c = line[i];
}
}
fclose(fp);
}
else
{
return false;
}
return true;
}
//******************************************************************************
// main()
//******************************************************************************
int main()
{
char data[130];
int device_count = 0; // number of OW devices found by search_rom()
int i;
int j;
int k;
char device_id[ID_LENGTH]; //8 byte rom id of current slected device
char rom_id_list[MAX_DEVICES][ID_LENGTH]; //List of rom id for each device on OW bus
double T[MAX_DEVICES];
bool device_logged[MAX_DEVICES];
//initialize device_logged to all false;
for(int i = 0; i < MAX_DEVICES; i++)
{
device_logged[i] = false;
}
// i/o variables
char rx_buff[128]; // comport input buffer
int rx_index; // rx_buffer pointer
char c; // command type character
int n; // argument count
int arg1; // argumnet 1
int arg2; // argument 2
int device; // device argument
int num_bytes;
int time_count;
int log_interval = PERIOD;
int time_to_sample;
apply_settings_file(device_logged, log_interval);
//************* init ticker timer callbacks ****************
timer_1.attach(&LED_blink_callback,0.5); //start ticker, once per sec.
i2c.frequency(400000); //set I2C clock to 400kHz
rLED = LED_OFF;
gLED = LED_ON;
bLED = LED_ON;
// reset DS2484
data[0] = 0xE1;
data[1] = 0xF0;
i2c.write(DS2484_ADD,data,1,1);
i2c.read(DS2484_ADD,data,1);
// ****************** search for all OW devices on bus *****************
device_count = search_rom(rom_id_list);
for(j=0;j<device_count;j++){
for(k=0;k<8;k++){
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
set_test_mode(device_id);
}
rx_index = 0; //character buffer index for input from PC
button.fall(&btn_pressed);
SDInsert.fall(&sd_insert);
sd.disk_initialize(); //initialize sd card
while(1) { // start main loop, take data if logging, check for input, repeat
if(sd_insert_flag == true)
{
sd.disk_initialize();
sd_insert_flag = false;
}
if(button_flag == true)
{
if(log_flag == false){ //start logging
if(SDDetect)//if SD card not detected
{
error_flag = true;
error_ticks = 6;
log_flag = false;
}
else
{
apply_settings_file(device_logged, log_interval);
FILE *fp = fopen(log_file, "a");
if (fp != NULL)
{
fprintf(fp, "Time(s)");
for(j=0;j<device_count;j++)
{
if(device_logged[j])
fprintf(fp,", Device %d Temperature (C)",j);
}
fprintf(fp,"\r\n");
fclose(fp);
}
time_count = 0;
time_to_sample = 0; // force sample at time = 0;
tick_flag = true; // force sample at time = 0;
log_flag = true;
}
}else{
log_flag = false;
}
button_flag = false;
}
while(tick_flag == false){ //check for input while waiting for next tick
// ----------------------------------------------------------------------------
// test for charater input for USB com port
// ----------------------------------------------------------------------------
//test if PC sent some charaters
while(pc.readable()){ //characters in buffer, get them
rx_buff[rx_index] = pc.getc();
if(rx_buff[rx_index] == CR){
rx_buff[++rx_index] = 0;
rx_index = -1; // because i++ at end of while give i=0 on next loop
device = 0;
arg1 = 0;
arg2 = 0;
n = sscanf(rx_buff, " %c %d %x %x", &c, & device, &arg1, &arg2);
//process input
if(n > 0){//got input so process it
switch(c){
case 'a':
case 'A': // alarm search
// ****************** search for all OW devices with alarm triggered on bus *****************
device_count = alarm_search(rom_id_list);
pc.printf("%d devices:\r\n", device_count);
for(j=0;j<device_count;j++){
pc.printf("device[%02X] rom id[",j);
for(i=7;i>=0;i--){
pc.printf("%02X",rom_id_list[j][i]);
}
pc.printf("]\r\n");
}
break;
case 'c':
case 'C':
if(!SDDetect)
pc.printf("y\r\n");
else
pc.printf("n\r\n");
break;
case 'd':
case 'D':
if(n==1) // if no device number is given
{
//clear device_logged array
for(int i = 0; i < MAX_DEVICES; i++)
{
device_logged[i] = false;
}
write_settings_file(log_interval, device_logged);
}
if(n == 2)
{
device_logged[device] = true;
write_settings_file(log_interval, device_logged);
}
break;
case 'f':
case 'F': //f is for "flash" for microSD
if(!SDDetect)
pc.printf("y\r\n");
else
pc.printf("n\r\n");
/*apply_settings_file(device_logged, log_interval);
pc.printf("Interval: %d\r\n", log_interval);
bool no_devices = true;
for(i = 0; i < MAX_DEVICES; i ++)
{
if(device_logged[i])
{
pc.printf("Device %d is being logged.\r\n", i);
no_devices = false;
}
}
if(no_devices)
pc.printf("No devices being logged.\r\n", i);*/
break;
case 'g':
case 'G':
//0 means get config, 1 means get log
if(n == 2)
{
bool fileExists = false;
if(device == 0)//get config
{
fileExists = print_settings_file();
}
if(device == 1)//get log
{
fileExists = print_log_file();
}
if(!fileExists)
{
pc.printf("no_file\r\n");
}
}
break;
case 'i':
case 'I': //Set Logging sample intreval in seconds
log_interval = device;
if(log_interval < 1)log_interval = 1;
if(log_interval > 60)log_interval = 60;
write_settings_file(log_interval, device_logged);
break;
case 'l':
case 'L': // Toggle logging
if(log_flag == false){ //start logging
if(SDDetect)//if SD card not detected
{
error_flag = true;
error_ticks = 6;
log_flag = false;
}
else
{
FILE *fp = fopen(log_file, "a");
if (fp != NULL)
{
fprintf(fp, "Time(s)");
for(j=0;j<device_count;j++)
{
fprintf(fp,", Device %d Temperature (C)",j);
}
fprintf(fp,"\r\n");
fclose(fp);
}
time_count = 0;
time_to_sample = 0; // force sample at time = 0;
tick_flag = true; // force sample at time = 0;
log_flag = true;
}
}else{
//pc.printf("<stop logging>\r\n");
log_flag = false;
}
break;
case 'P':
case 'p': // power down One Wire buss
if(n == 2){
if (device == 0){ // power down mode ON.
data[0] = WDC; // 0xD2 Write Device Config
data[1] = 0xD2; // 1101 0010 set 1WS = 0, SPU = 0, PDN = 1, APU = 0
i2c.write(DS2484_ADD,data,2,0);
pc.printf("<Power down DQ>\r\n");
}else{ // power down mode OFF
data[0] = WDC; // 0xD2 Write Device Config
data[1] = 0xE1; // 1110 0001 set 1WS = 0, SPU = 0, PDN = 0, APU = 1
i2c.write(DS2484_ADD,data,2,0);
pc.printf("<Power up DQ>\r\n");
}
}
break;
case 'r':
case 'R': //read register "r device radd.start radd.end"
for(k=0;k<8;k++){
device_id[k] = rom_id_list[device][k]; // get device_id from rom_id_list
}
if(n==3){ //read single register from selected device
read_OW_register(device_id,arg1,1,data);
pc.printf("device[%02X] add[%02X] data[%02X] crc[%02X %02X]\r\n",device,arg1,data[0],data[1],data[2]);
}
if(n==4){ //read a range of regesters from selected device
num_bytes = arg2-arg1 + 1; // calculate number of bytes to read
if (num_bytes < 1) num_bytes = 1; // if arg2 <= arg 1 just read arg1 address.
read_OW_register(device_id,arg1,num_bytes,data);
for(i=0;i<num_bytes;i++){
pc.printf("\r\ndevice[%02X] add[%02X] data[%02X]",device,arg1+i,data[i]);
}
pc.printf(" crc[%02X %02X]\r\n",data[i],data[i+1]);
}
break;
case 's':
case 'S': // search rom
// ****************** search for all OW devices on bus *****************
device_count = search_rom(rom_id_list);
// print out rom codes found
//pc.printf("\r\nsearch rom\r\n");
pc.printf("%d devices:\r\n", device_count);
for(j=0;j<device_count;j++){
pc.printf("device[%02X] rom id[",j);
for(i=7;i>=0;i--){
pc.printf("%02X",rom_id_list[j][i]);
}
pc.printf("]\r\n");
}
break;
case 'T':
case 't':
if(n == 2){//get temperatures from selected device
for(k=0;k<8;k++){
device_id[k] = rom_id_list[device][k]; // get device_id from rom_id_list
}
convert_temperature(device_id); //send OW convert selected device
wait(0.02); //wait 20 ms for convert temperature to complete
T[0] = get_temperature(device_id);
pc.printf("device[%02X] temperature[%.3f]\r\n",device,T[0]);
}
if(n == 3){ // "t 1 5" get temperature for devices 1 thru 5
convert_temperature(); //send OW convert to all devices
wait(0.02); //wait 750 ms for convert temperature to complete
for(j=device;j<=arg1;j++){
for(k=0;k<8;k++){
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
pc.printf("device[%02X] temperature[%.3f]\r\n",j,get_temperature(device_id));
}
}
break;
case 'w':
case 'W': //write register "w device w.addr data"
for(k=0;k<8;k++){
device_id[k] = rom_id_list[device][k]; // get device_id from rom_id_list
}
data[0] = arg2;
write_OW_register(device_id, arg1, 1, data);
pc.printf("write -- device[%02X] add[%02X] data[%02X] ",device,arg1,arg2);
// get CRC
pc.printf("crc[%02X %02X]\r\n",data[0],data[1]);
break;
case 'x':
case 'X': // experimental modes
// ****************** set up ADC enabled in test mode*****************
pc.printf("<set ADC_ENABLED in test mode>\r\n");
for(j=0;j<device_count;j++){
for(k=0;k<8;k++){
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
set_test_mode(device_id);
}
break;
}//end switch(c)
}//if(n>0)
}//end if(CR)
if(rx_buff[rx_index] == BS){//backspace received, back up buffer pointer
if(rx_index>0)rx_index--;//remove last char from buffer if not at start.
}else rx_index++;
}//end while(pc.redable())
wait(0.1); // slow down polling
}// end (while tick == false)
tick_flag = false; // set to false for next time
// only reached when tick_flag = true otherwise stuck in pc.readable() loop
if(log_flag == true){
if(time_count >= time_to_sample){ //take next sample
time_to_sample += log_interval; // calculate time for next sample
// start conversion
convert_temperature();
wait(0.02); //wait 20ms for convert to complete
for(j=0;j<device_count;j++){
for(k=0;k<8;k++){
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
T[j] = get_temperature(device_id);
}
//open file for microSD logging
FILE *fp = fopen(log_file, "a");
if (fp != NULL)
{
//fprintf(fp, "\n");
fprintf(fp, "%d",time_count);
for(j=0;j<device_count;j++)
{
if(device_logged[j])
{
fprintf(fp,", %.3f",T[j]);
}
}
fprintf(fp,"\r\n");
fclose(fp);
}
}// end if(time_count >= time_to_sample)
time_count ++; //
}// end if(log_flag)
}//end while(1)
}