joey shelton
/
OT07_I2C_GUI_Firmware
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependencies: SDFileSystem max32630fthr USBDevice
Fork of
FTHR_SD_Demo
by 
Maxim Integrated
Diff: main.cpp
- Revision:
- 13:674c647d12dd
- Parent:
- 12:aa9fff0aec91
- Child:
- 14:480f2398fe6a
--- a/main.cpp Tue Jul 03 16:41:47 2018 +0000
+++ b/main.cpp Tue Jul 03 16:48:14 2018 +0000
@@ -90,7 +90,6 @@
// Virtual serial port over USB
-//USBSerial pc;
USBSerial pc(0x0B6A, 0x0042, 0x0001, true);
// I2C setup
@@ -181,12 +180,6 @@
sd_insert_flag = true;
}
-/*
-void take_data_flag_callback(){ // set data sample time flag
-
- take_data_flag = true;
-}
-*/
// *****************************************************************************
// Define CRC-8 Table
@@ -353,7 +346,6 @@
for(i=0;i<8;i++)rom_id[i] = 0x00; //clear rom_id
do{ // loop for each rom search (end when last_device = 1)
- //db.printf("\r\nsearch next rom [%2d]",rom_count);
//init variable for each search
bit_num = 1;
@@ -422,30 +414,21 @@
byte_num++; //also increnent byt num
byte_mask = 1;
}
- // pc.printf("sdx[%d] lz[%2d] byte[%d] mask[%02X] bn[%d] ROM[%02X %02X %02X]\n\r",search_dir,last_zero,byte_num,byte_mask, byte_num, rom_id[2], rom_id[1], rom_id[0]);
}while(bit_num<65); //bit nun started at 1 so end after 64
last_discrep = last_zero;
if(last_discrep == 0)last_device = 1;
//copy rom_id into rom_id_list and calc crc of first 7 bytes
- crc = 0x00; // reset crc8 total to 0
- //db.printf(" -- rom id[ ");
+ crc = 0x00; // reset crc8 total to 0
for(i=7;i>=0;i--){
- rom_id_list[rom_count][i] = rom_id[i] ;
- //db.printf("%02X ",rom_id[i]);
- }
- //db.printf("]\r\n");
- //db.printf("last_device[%2d]\r\n",last_device);
- //db.printf("last_zero[%2d]\r\n",last_zero);
- //db.printf("last_discrep[%2d]\r\n",last_discrep);
+ rom_id_list[rom_count][i] = rom_id[i];
+ }
//clac_crc of rom ID
for (i=0;i<7;i++){
crc = calc_crc8(crc, rom_id[i]);
}
- //db.printf("crc8 = [%02X]\r\n",crc);
-
rom_count++;
}//if(last_device..)
@@ -559,8 +542,7 @@
last_discrep = last_zero;
if(last_discrep == 0)last_device = 1;
//copy rom_id into rom_id_list and calc crc of first 7 bytes
- crc = 0x00; // reset crc8 total to 0
- //db.printf(" -- rom id[ ");
+ crc = 0x00; // reset crc8 total to 0
for(i=7;i>=0;i--){
rom_id_list[rom_count][i] = rom_id[i];
}
@@ -655,10 +637,6 @@
OW_write_byte(n-1); // send length of bytes to read (0 -> 1 byte)
OW_read_byte(data,n+2); // read n bytes plus 2 byte CRC
- // debug output
- //for(i=0;i<n+2;i++) db.printf("read_OW_register - [%2d][%02X]\r\n",i,data[i]);
-
-
// --- todo ----
// calculate CRC of
// Command + length + n bytes
@@ -801,13 +779,11 @@
// char data[2];
read_OW_register(device_id,OT07_FIFO_DATA,0x02,t); // Read temperature from FIFO, 2 bytes
- //db.printf("get_temperature -- FIFO[%02X %02X] CRC[%02X %02X]\r\n",t[0],t[1],t[2],t[3]);
//calculate temperture from data
count = (int)(t[0]*256 + t[1]);
if (count >= 32768)count = count - 65536; // 2s comp
T = (double)count*0.005;
- //db.printf("T = %f count[%5d]\r\n", T,count);
return T;
}// end get_temperature()
@@ -943,8 +919,6 @@
//returns true if settings file exists and is in the proper format
bool apply_settings_file(bool (&logged_devices)[MAX_DEVICES], int& interval)
{
- //int log_interval = 10;
- //bool devices[MAX_DEVICES];
char * line = NULL;
int len = 0;
@@ -960,7 +934,6 @@
{
logged_devices[i] = false;
}
-
// Read contents from file
while ((getline(&line, &len, fp)) != -1)
@@ -1003,9 +976,6 @@
}
-
-
-
//******************************************************************************
// main()
//******************************************************************************
@@ -1054,11 +1024,6 @@
i2c.frequency(400000); //set I2C clock to 400kHz
-
- //wait(1); //wait 1 sec for USB serial port to init.
-
- //db.printf("--- OT07 - Base Logger Firmware uisng DS2484 bridge V0.2 ---\r\ndaplink serial port\r\n");
- //pc.printf("--- OT07 - Base Logger Firmware uisng DS2484 bridge V0.2 ---\r\nmicro USB serial port\r\n");
rLED = LED_OFF;
gLED = LED_ON;
@@ -1069,32 +1034,17 @@
data[0] = 0xE1;
data[1] = 0xF0;
i2c.write(DS2484_ADD,data,1,1);
- i2c.read(DS2484_ADD,data,1);
-
- //db.printf("DS2484 Reset --> status[%02X]\r\n",data[0]);
+ i2c.read(DS2484_ADD,data,1);
// ****************** search for all OW devices on bus *****************
device_count = search_rom(rom_id_list);
-
-
- // print out rom codes found
- /*pc.printf("\r\nsearch rom\r\n");
- for(j=0;j<device_count;j++){
- //pc.printf("device[%02X] rom id[ ",j);
- for(i=7;i>=0;i--){
- pc.printf("%02X",rom_id_list[j][i]);
- }
- pc.printf("]\r\n");
- }
- pc.printf("\r\n");*/
for(j=0;j<device_count;j++){
for(k=0;k<8;k++){
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
set_test_mode(device_id);
- //db.printf("device[%2X] in test mode\r\n",j);
}
@@ -1105,8 +1055,6 @@
sd.disk_initialize(); //initialize sd card
- //db.printf("start Main loop\r\n");
- //db.printf("tf[%d]\r\n",tick_flag);
while(1) { // start main loop, take data if logging, check for input, repeat
if(sd_insert_flag == true)
@@ -1151,7 +1099,6 @@
log_flag = true;
}
}else{
- //pc.printf("<stop logging>\r\n");
log_flag = false;
}
button_flag = false;
@@ -1166,24 +1113,15 @@
//test if PC sent some charaters
while(pc.readable()){ //characters in buffer, get them
rx_buff[rx_index] = pc.getc();
- //pc.putc(rx_buff[rx_index]); //echo character
- //pc.printf("<[%02x] %c i[%d]>",rx_buff[i],rx_buff[i],i); //echo charater
-
if(rx_buff[rx_index] == CR){
- //db.printf("\r\n");
- //pc.printf("\r\n");
rx_buff[++rx_index] = 0;
- //db.printf("%s\r\n",rx_buff);
- //pc.printf("%s\r\n",rx_buff);
rx_index = -1; // because i++ at end of while give i=0 on next loop
device = 0;
arg1 = 0;
arg2 = 0;
n = sscanf(rx_buff, " %c %d %x %x", &c, & device, &arg1, &arg2);
-
- //db.printf("c[%c] d[%d] a1[%x] a2[%x] n[%d]\r\n",c,device,arg1,arg2,n); //echo values read in
//process input
if(n > 0){//got input so process it
switch(c){
@@ -1364,8 +1302,7 @@
pc.printf("%02X",rom_id_list[j][i]);
}
pc.printf("]\r\n");
- }
- //pc.printf("\r\n");
+ }
break;
case 'T':
@@ -1377,8 +1314,7 @@
convert_temperature(device_id); //send OW convert selected device
wait(0.02); //wait 20 ms for convert temperature to complete
T[0] = get_temperature(device_id);
- pc.printf("device[%02X] temperature[%.3f]\r\n",device,T[0]);
- //pc.printf("\r\n");
+ pc.printf("device[%02X] temperature[%.3f]\r\n",device,T[0]);
}
if(n == 3){ // "t 1 5" get temperature for devices 1 thru 5
@@ -1389,8 +1325,7 @@
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
pc.printf("device[%02X] temperature[%.3f]\r\n",j,get_temperature(device_id));
- }
- //pc.printf("\r\n");
+ }
}
break;
@@ -1404,8 +1339,7 @@
pc.printf("write -- device[%02X] add[%02X] data[%02X] ",device,arg1,arg2);
- // get CRC
- //OW_read_byte(data,2);
+ // get CRC
pc.printf("crc[%02X %02X]\r\n",data[0],data[1]);
break;
@@ -1420,7 +1354,6 @@
device_id[k] = rom_id_list[j][k]; // get device_id from rom_id_list
}
set_test_mode(device_id);
- //db.printf("device[%2X] in test mode\r\n",j);
}
break;
@@ -1438,8 +1371,7 @@
tick_flag = false; // set to false for next time
// only reached when tick_flag = true otherwise stuck in pc.readable() loop
- if(log_flag == true){
- //pc.printf("tc{%5d] tts[%5d]\n\r",time_count,time_to_sample);
+ if(log_flag == true){
if(time_count >= time_to_sample){ //take next sample
time_to_sample += log_interval; // calculate time for next sample
@@ -1452,14 +1384,8 @@
}
T[j] = get_temperature(device_id);
}
- /*
- // print out time count and temperatures
- pc.printf("%5d",time_count);
- for(j=0;j<device_count;j++){
- pc.printf(", %7.3f",T[j]);
- }
- pc.printf("\r\n");
- */
+
+ //open file for microSD logging
FILE *fp = fopen(log_file, "a");
if (fp != NULL)
{
@@ -1484,4 +1410,3 @@
}//end while(1)
}
-