Alex Cordonnier / BLE_API

High level Bluetooth Low Energy API and radio abstraction layer

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@1176:8b308f971420, 2016-04-06 (annotated)

Committer:
vcoubard
Date:
Wed Apr 06 19:15:24 2016 +0100
Revision:
1176:8b308f971420
Parent:
1175:1d25cd85e851
Child:
1179:4ab722f8dca0
Synchronized with git rev b117e9d0

Author: Andres Amaya Garcia

Add links to new API from deprecated message in BLE.h

Who changed what in which revision?

UserRevisionLine numberNew contents of line
vcoubard 1131:692ddf04fc42 1 /* mbed Microcontroller Library
vcoubard 1131:692ddf04fc42 2 * Copyright (c) 2006-2013 ARM Limited
vcoubard 1131:692ddf04fc42 3 *
vcoubard 1131:692ddf04fc42 4 * Licensed under the Apache License, Version 2.0 (the "License");
vcoubard 1131:692ddf04fc42 5 * you may not use this file except in compliance with the License.
vcoubard 1131:692ddf04fc42 6 * You may obtain a copy of the License at
vcoubard 1131:692ddf04fc42 7 *
vcoubard 1131:692ddf04fc42 8 * http://www.apache.org/licenses/LICENSE-2.0
vcoubard 1131:692ddf04fc42 9 *
vcoubard 1131:692ddf04fc42 10 * Unless required by applicable law or agreed to in writing, software
vcoubard 1131:692ddf04fc42 11 * distributed under the License is distributed on an "AS IS" BASIS,
vcoubard 1131:692ddf04fc42 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard 1131:692ddf04fc42 13 * See the License for the specific language governing permissions and
vcoubard 1131:692ddf04fc42 14 * limitations under the License.
vcoubard 1131:692ddf04fc42 15 */
vcoubard 1131:692ddf04fc42 16
vcoubard 1131:692ddf04fc42 17 #ifndef __BLE_H__
vcoubard 1131:692ddf04fc42 18 #define __BLE_H__
vcoubard 1131:692ddf04fc42 19
vcoubard 1131:692ddf04fc42 20 #include "blecommon.h"
vcoubard 1131:692ddf04fc42 21 #include "Gap.h"
vcoubard 1131:692ddf04fc42 22 #include "GattServer.h"
vcoubard 1131:692ddf04fc42 23 #include "GattClient.h"
vcoubard 1131:692ddf04fc42 24
vcoubard 1131:692ddf04fc42 25 #include "ble/FunctionPointerWithContext.h"
vcoubard 1131:692ddf04fc42 26
vcoubard 1131:692ddf04fc42 27 #ifdef YOTTA_CFG_MBED_OS
vcoubard 1131:692ddf04fc42 28 #include "mbed-drivers/mbed_error.h"
vcoubard 1131:692ddf04fc42 29 #else
vcoubard 1131:692ddf04fc42 30 #include "mbed_error.h"
vcoubard 1131:692ddf04fc42 31 #endif
vcoubard 1131:692ddf04fc42 32
vcoubard 1131:692ddf04fc42 33 /* Forward declaration for the implementation class */
vcoubard 1131:692ddf04fc42 34 class BLEInstanceBase;
vcoubard 1131:692ddf04fc42 35
vcoubard 1131:692ddf04fc42 36 /**
vcoubard 1131:692ddf04fc42 37 * The base class used to abstract away BLE-capable radio transceivers or SOCs,
vcoubard 1131:692ddf04fc42 38 * so that the BLE API can work with any radio transparently.
vcoubard 1131:692ddf04fc42 39 */
vcoubard 1131:692ddf04fc42 40 class BLE
vcoubard 1131:692ddf04fc42 41 {
vcoubard 1131:692ddf04fc42 42 public:
vcoubard 1156:e1ea38b576c6 43 typedef unsigned InstanceID_t; /**< The type returned by BLE::getInstanceID(). */
vcoubard 1131:692ddf04fc42 44
vcoubard 1131:692ddf04fc42 45 /**
vcoubard 1131:692ddf04fc42 46 * The context provided to init-completion-callbacks (see init() below).
vcoubard 1131:692ddf04fc42 47 *
vcoubard 1131:692ddf04fc42 48 * @param ble
vcoubard 1131:692ddf04fc42 49 * A reference to the BLE instance being initialized.
vcoubard 1131:692ddf04fc42 50 * @param error
vcoubard 1131:692ddf04fc42 51 * Captures the result of initialization. It is set to
vcoubard 1131:692ddf04fc42 52 * BLE_ERROR_NONE if initialization completed successfully. Else
vcoubard 1131:692ddf04fc42 53 * the error value is implementation specific.
vcoubard 1131:692ddf04fc42 54 */
vcoubard 1131:692ddf04fc42 55 struct InitializationCompleteCallbackContext {
vcoubard 1156:e1ea38b576c6 56 BLE& ble; /**< Reference to the BLE object that has been initialized */
vcoubard 1156:e1ea38b576c6 57 ble_error_t error; /**< Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
vcoubard 1131:692ddf04fc42 58 };
vcoubard 1131:692ddf04fc42 59
vcoubard 1131:692ddf04fc42 60 /**
vcoubard 1131:692ddf04fc42 61 * The signature for function-pointer like callbacks for initialization-completion.
vcoubard 1131:692ddf04fc42 62 *
vcoubard 1131:692ddf04fc42 63 * @note There are two versions of init(). In addition to the simple
vcoubard 1131:692ddf04fc42 64 * function-pointer, init() can also take a <Object, member> tuple as its
vcoubard 1131:692ddf04fc42 65 * callback target. In case of the latter, the following declaration doesn't apply.
vcoubard 1131:692ddf04fc42 66 */
vcoubard 1131:692ddf04fc42 67 typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
vcoubard 1131:692ddf04fc42 68
vcoubard 1131:692ddf04fc42 69 /**
vcoubard 1131:692ddf04fc42 70 * Initialize the BLE controller. This should be called before using
vcoubard 1156:e1ea38b576c6 71 * anything else in the BLE API.
vcoubard 1131:692ddf04fc42 72 *
vcoubard 1131:692ddf04fc42 73 * init() hands control to the underlying BLE module to accomplish
vcoubard 1131:692ddf04fc42 74 * initialization. This initialization may tacitly depend on other hardware
vcoubard 1131:692ddf04fc42 75 * setup (such as clocks or power-modes) that happens early on during
vcoubard 1131:692ddf04fc42 76 * system startup. It may not be safe to call init() from a global static
vcoubard 1131:692ddf04fc42 77 * context where ordering is compiler-specific and can't be guaranteed - it
vcoubard 1131:692ddf04fc42 78 * is safe to call BLE::init() from within main().
vcoubard 1131:692ddf04fc42 79 *
vcoubard 1131:692ddf04fc42 80 * @param initCompleteCallback
vcoubard 1131:692ddf04fc42 81 * A callback for when initialization completes for a BLE
vcoubard 1131:692ddf04fc42 82 * instance. This is an optional parameter; if no callback is
vcoubard 1131:692ddf04fc42 83 * set up the application can still determine the status of
vcoubard 1131:692ddf04fc42 84 * initialization using BLE::hasInitialized() (see below).
vcoubard 1131:692ddf04fc42 85 *
vcoubard 1131:692ddf04fc42 86 * @return BLE_ERROR_NONE if the initialization procedure was started
vcoubard 1131:692ddf04fc42 87 * successfully.
vcoubard 1131:692ddf04fc42 88 *
vcoubard 1131:692ddf04fc42 89 * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
vcoubard 1131:692ddf04fc42 90 * the initialization completion callback at some point.
vcoubard 1131:692ddf04fc42 91 *
vcoubard 1131:692ddf04fc42 92 * @note Nearly all BLE APIs would return
vcoubard 1131:692ddf04fc42 93 * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
vcoubard 1131:692ddf04fc42 94 * corresponding transport is initialized.
vcoubard 1131:692ddf04fc42 95 *
vcoubard 1131:692ddf04fc42 96 * @note There are two versions of init(). In addition to the simple
vcoubard 1131:692ddf04fc42 97 * function-pointer, init() can also take an <Object, member> tuple as its
vcoubard 1131:692ddf04fc42 98 * callback target.
vcoubard 1131:692ddf04fc42 99 */
vcoubard 1131:692ddf04fc42 100 ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
vcoubard 1131:692ddf04fc42 101 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
vcoubard 1131:692ddf04fc42 102 return initImplementation(callback);
vcoubard 1131:692ddf04fc42 103 }
vcoubard 1131:692ddf04fc42 104
vcoubard 1131:692ddf04fc42 105 /**
vcoubard 1131:692ddf04fc42 106 * An alternate declaration for init(). This one takes an <Object, member> tuple as its
vcoubard 1131:692ddf04fc42 107 * callback target.
vcoubard 1131:692ddf04fc42 108 */
vcoubard 1131:692ddf04fc42 109 template<typename T>
vcoubard 1131:692ddf04fc42 110 ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
vcoubard 1131:692ddf04fc42 111 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
vcoubard 1131:692ddf04fc42 112 return initImplementation(callback);
vcoubard 1131:692ddf04fc42 113 }
vcoubard 1131:692ddf04fc42 114
vcoubard 1131:692ddf04fc42 115 /**
vcoubard 1131:692ddf04fc42 116 * @return true if initialization has completed for the underlying BLE
vcoubard 1131:692ddf04fc42 117 * transport.
vcoubard 1131:692ddf04fc42 118 *
vcoubard 1131:692ddf04fc42 119 * The application can set up a callback to signal completion of
vcoubard 1131:692ddf04fc42 120 * initialization when using init(). Otherwise, this method can be used to
vcoubard 1131:692ddf04fc42 121 * poll the state of initialization.
vcoubard 1131:692ddf04fc42 122 */
vcoubard 1131:692ddf04fc42 123 bool hasInitialized(void) const;
vcoubard 1131:692ddf04fc42 124
vcoubard 1131:692ddf04fc42 125 /**
vcoubard 1131:692ddf04fc42 126 * Purge the BLE stack of GATT and GAP state. init() must be called
vcoubard 1131:692ddf04fc42 127 * afterwards to re-instate services and GAP state. This API offers a way to
vcoubard 1131:692ddf04fc42 128 * repopulate the GATT database with new services and characteristics.
vcoubard 1131:692ddf04fc42 129 */
vcoubard 1131:692ddf04fc42 130 ble_error_t shutdown(void);
vcoubard 1131:692ddf04fc42 131
vcoubard 1131:692ddf04fc42 132 /**
vcoubard 1131:692ddf04fc42 133 * This call allows the application to get the BLE stack version information.
vcoubard 1131:692ddf04fc42 134 *
vcoubard 1131:692ddf04fc42 135 * @return A pointer to a const string representing the version.
vcoubard 1156:e1ea38b576c6 136 *
vcoubard 1156:e1ea38b576c6 137 * @note The string returned is owned by BLE API.
vcoubard 1131:692ddf04fc42 138 */
vcoubard 1131:692ddf04fc42 139 const char *getVersion(void);
vcoubard 1131:692ddf04fc42 140
vcoubard 1156:e1ea38b576c6 141 /**
vcoubard 1156:e1ea38b576c6 142 * Accessor to Gap. All Gap related functionality requires
vcoubard 1131:692ddf04fc42 143 * going through this accessor.
vcoubard 1156:e1ea38b576c6 144 *
vcoubard 1156:e1ea38b576c6 145 * @return A reference to a Gap object associated to this BLE instance.
vcoubard 1156:e1ea38b576c6 146 */
vcoubard 1156:e1ea38b576c6 147 Gap &gap();
vcoubard 1156:e1ea38b576c6 148
vcoubard 1156:e1ea38b576c6 149 /**
vcoubard 1156:e1ea38b576c6 150 * A const alternative to gap().
vcoubard 1156:e1ea38b576c6 151 *
vcoubard 1156:e1ea38b576c6 152 * @return A const reference to a Gap object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 153 */
vcoubard 1131:692ddf04fc42 154 const Gap &gap() const;
vcoubard 1131:692ddf04fc42 155
vcoubard 1156:e1ea38b576c6 156 /**
vcoubard 1156:e1ea38b576c6 157 * Accessor to GattServer. All GattServer related functionality requires
vcoubard 1156:e1ea38b576c6 158 * going through this accessor.
vcoubard 1156:e1ea38b576c6 159 *
vcoubard 1156:e1ea38b576c6 160 * @return A reference to a GattServer object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 161 */
vcoubard 1155:e28c7aac64ab 162 GattServer& gattServer();
vcoubard 1142:a358d0d20f62 163
vcoubard 1156:e1ea38b576c6 164 /**
vcoubard 1156:e1ea38b576c6 165 * A const alternative to gattServer().
vcoubard 1156:e1ea38b576c6 166 *
vcoubard 1156:e1ea38b576c6 167 * @return A const reference to a GattServer object associated to this BLE instance.
vcoubard 1142:a358d0d20f62 168 */
vcoubard 1156:e1ea38b576c6 169 const GattServer& gattServer() const;
vcoubard 1156:e1ea38b576c6 170
vcoubard 1156:e1ea38b576c6 171 /**
vcoubard 1156:e1ea38b576c6 172 * Accessors to GattClient. All GattClient related functionality requires going
vcoubard 1156:e1ea38b576c6 173 * through this accessor.
vcoubard 1156:e1ea38b576c6 174 *
vcoubard 1156:e1ea38b576c6 175 * @return A reference to a GattClient object associated to this BLE instance.
vcoubard 1156:e1ea38b576c6 176 */
vcoubard 1155:e28c7aac64ab 177 GattClient& gattClient();
vcoubard 1142:a358d0d20f62 178
vcoubard 1156:e1ea38b576c6 179 /**
vcoubard 1156:e1ea38b576c6 180 * A const alternative to gattClient().
vcoubard 1156:e1ea38b576c6 181 *
vcoubard 1156:e1ea38b576c6 182 * @return A const reference to a GattClient object associated to this BLE instance.
vcoubard 1156:e1ea38b576c6 183 */
vcoubard 1156:e1ea38b576c6 184 const GattClient& gattClient() const;
vcoubard 1156:e1ea38b576c6 185
vcoubard 1156:e1ea38b576c6 186 /**
vcoubard 1156:e1ea38b576c6 187 * Accessors to SecurityManager. All SecurityManager related functionality requires
vcoubard 1156:e1ea38b576c6 188 * going through this accessor.
vcoubard 1156:e1ea38b576c6 189 *
vcoubard 1156:e1ea38b576c6 190 * @return A reference to a SecurityManager object associated to this BLE instance.
vcoubard 1156:e1ea38b576c6 191 */
vcoubard 1156:e1ea38b576c6 192 SecurityManager& securityManager();
vcoubard 1156:e1ea38b576c6 193
vcoubard 1156:e1ea38b576c6 194 /**
vcoubard 1156:e1ea38b576c6 195 * A const alternative to securityManager().
vcoubard 1156:e1ea38b576c6 196 *
vcoubard 1156:e1ea38b576c6 197 * @return A const reference to a SecurityManager object associated to this BLE instance.
vcoubard 1131:692ddf04fc42 198 */
vcoubard 1131:692ddf04fc42 199 const SecurityManager& securityManager() const;
vcoubard 1131:692ddf04fc42 200
vcoubard 1131:692ddf04fc42 201 /**
vcoubard 1131:692ddf04fc42 202 * Yield control to the BLE stack or to other tasks waiting for events. This
vcoubard 1131:692ddf04fc42 203 * is a sleep function that will return when there is an application-specific
vcoubard 1131:692ddf04fc42 204 * interrupt, but the MCU might wake up several times before
vcoubard 1131:692ddf04fc42 205 * returning (to service the stack). This is not always interchangeable with
vcoubard 1131:692ddf04fc42 206 * WFE().
vcoubard 1131:692ddf04fc42 207 */
vcoubard 1131:692ddf04fc42 208 void waitForEvent(void);
vcoubard 1131:692ddf04fc42 209
vcoubard 1131:692ddf04fc42 210 public:
vcoubard 1156:e1ea38b576c6 211 /**
vcoubard 1156:e1ea38b576c6 212 * The value of the BLE::InstanceID_t for the default BLE instance.
vcoubard 1156:e1ea38b576c6 213 */
vcoubard 1131:692ddf04fc42 214 static const InstanceID_t DEFAULT_INSTANCE = 0;
vcoubard 1131:692ddf04fc42 215 #ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
vcoubard 1156:e1ea38b576c6 216 /**
vcoubard 1156:e1ea38b576c6 217 * The number of permitted BLE instances for the application.
vcoubard 1156:e1ea38b576c6 218 */
vcoubard 1131:692ddf04fc42 219 static const InstanceID_t NUM_INSTANCES = 1;
vcoubard 1131:692ddf04fc42 220 #else
vcoubard 1156:e1ea38b576c6 221 /**
vcoubard 1156:e1ea38b576c6 222 * The number of permitted BLE instances for the application.
vcoubard 1156:e1ea38b576c6 223 */
vcoubard 1131:692ddf04fc42 224 static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
vcoubard 1131:692ddf04fc42 225 #endif
vcoubard 1131:692ddf04fc42 226
vcoubard 1131:692ddf04fc42 227 /**
vcoubard 1131:692ddf04fc42 228 * Get a reference to the BLE singleton corresponding to a given interface.
vcoubard 1131:692ddf04fc42 229 * There is a static array of BLE singletons.
vcoubard 1131:692ddf04fc42 230 *
vcoubard 1156:e1ea38b576c6 231 * @note Calling Instance() is preferred over constructing a BLE object
vcoubard 1131:692ddf04fc42 232 * directly, as it returns references to singletons.
vcoubard 1131:692ddf04fc42 233 *
vcoubard 1131:692ddf04fc42 234 * @param[in] id
vcoubard 1135:22aada733dbd 235 * Instance-ID. This should be less than NUM_INSTANCES
vcoubard 1131:692ddf04fc42 236 * for the returned BLE singleton to be useful.
vcoubard 1131:692ddf04fc42 237 *
vcoubard 1156:e1ea38b576c6 238 * @return A reference to a single object.
vcoubard 1131:692ddf04fc42 239 */
vcoubard 1131:692ddf04fc42 240 static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
vcoubard 1131:692ddf04fc42 241
vcoubard 1131:692ddf04fc42 242 /**
vcoubard 1131:692ddf04fc42 243 * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
vcoubard 1131:692ddf04fc42 244 * are thin wrappers around a transport object (that is, ptr. to
vcoubard 1131:692ddf04fc42 245 * BLEInstanceBase).
vcoubard 1131:692ddf04fc42 246 *
vcoubard 1131:692ddf04fc42 247 * It is better to create BLE objects as singletons accessed through the
vcoubard 1131:692ddf04fc42 248 * Instance() method. If multiple BLE handles are constructed for the same
vcoubard 1131:692ddf04fc42 249 * interface (using this constructor), they will share the same underlying
vcoubard 1131:692ddf04fc42 250 * transport object.
vcoubard 1131:692ddf04fc42 251 */
vcoubard 1131:692ddf04fc42 252 BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
vcoubard 1131:692ddf04fc42 253
vcoubard 1131:692ddf04fc42 254 /**
vcoubard 1131:692ddf04fc42 255 * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
vcoubard 1131:692ddf04fc42 256 */
vcoubard 1131:692ddf04fc42 257 InstanceID_t getInstanceID(void) const {
vcoubard 1131:692ddf04fc42 258 return instanceID;
vcoubard 1131:692ddf04fc42 259 }
vcoubard 1131:692ddf04fc42 260
vcoubard 1131:692ddf04fc42 261 /*
vcoubard 1131:692ddf04fc42 262 * Deprecation alert!
vcoubard 1131:692ddf04fc42 263 * All of the following are deprecated and may be dropped in a future
vcoubard 1131:692ddf04fc42 264 * release. Documentation should refer to alternative APIs.
vcoubard 1131:692ddf04fc42 265 */
vcoubard 1131:692ddf04fc42 266
vcoubard 1131:692ddf04fc42 267 /* GAP specific APIs. */
vcoubard 1131:692ddf04fc42 268 public:
vcoubard 1131:692ddf04fc42 269 /**
vcoubard 1131:692ddf04fc42 270 * Set the BTLE MAC address and type.
vcoubard 1131:692ddf04fc42 271 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 272 *
vcoubard 1176:8b308f971420 273 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 274 * Gap::setAddress(). A former call to
vcoubard 1156:e1ea38b576c6 275 * ble.setAddress(...) should be replaced with
vcoubard 1156:e1ea38b576c6 276 * ble.gap().setAddress(...).
vcoubard 1131:692ddf04fc42 277 */
vcoubard 1135:22aada733dbd 278 ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard 1131:692ddf04fc42 279 return gap().setAddress(type, address);
vcoubard 1131:692ddf04fc42 280 }
vcoubard 1131:692ddf04fc42 281
vcoubard 1131:692ddf04fc42 282 /**
vcoubard 1156:e1ea38b576c6 283 * Fetch the Bluetooth Low Energy MAC address and type.
vcoubard 1131:692ddf04fc42 284 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 285 *
vcoubard 1176:8b308f971420 286 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 287 * Gap::getAddress(). A former call to
vcoubard 1156:e1ea38b576c6 288 * ble.getAddress(...) should be replaced with
vcoubard 1156:e1ea38b576c6 289 * ble.gap().getAddress(...).
vcoubard 1131:692ddf04fc42 290 */
vcoubard 1135:22aada733dbd 291 ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard 1131:692ddf04fc42 292 return gap().getAddress(typeP, address);
vcoubard 1131:692ddf04fc42 293 }
vcoubard 1131:692ddf04fc42 294
vcoubard 1131:692ddf04fc42 295 /**
vcoubard 1131:692ddf04fc42 296 * Set the GAP advertising mode to use for this device.
vcoubard 1131:692ddf04fc42 297 *
vcoubard 1176:8b308f971420 298 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 299 * Gap::setAdvertisingType(). A former call to
vcoubard 1156:e1ea38b576c6 300 * ble.setAdvertisingType(...) should be replaced with
vcoubard 1156:e1ea38b576c6 301 * ble.gap().setAdvertisingType(...).
vcoubard 1131:692ddf04fc42 302 */
vcoubard 1131:692ddf04fc42 303 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
vcoubard 1131:692ddf04fc42 304 gap().setAdvertisingType(advType);
vcoubard 1131:692ddf04fc42 305 }
vcoubard 1131:692ddf04fc42 306
vcoubard 1131:692ddf04fc42 307 /**
vcoubard 1131:692ddf04fc42 308 * @param[in] interval
vcoubard 1131:692ddf04fc42 309 * Advertising interval in units of milliseconds. Advertising
vcoubard 1131:692ddf04fc42 310 * is disabled if interval is 0. If interval is smaller than
vcoubard 1131:692ddf04fc42 311 * the minimum supported value, then the minimum supported
vcoubard 1131:692ddf04fc42 312 * value is used instead. This minimum value can be discovered
vcoubard 1131:692ddf04fc42 313 * using getMinAdvertisingInterval().
vcoubard 1131:692ddf04fc42 314 *
vcoubard 1131:692ddf04fc42 315 * This field must be set to 0 if connectionMode is equal
vcoubard 1131:692ddf04fc42 316 * to ADV_CONNECTABLE_DIRECTED.
vcoubard 1131:692ddf04fc42 317 *
vcoubard 1156:e1ea38b576c6 318 * @note Decreasing this value allows central devices to detect a
vcoubard 1131:692ddf04fc42 319 * peripheral faster, at the expense of more power being used by the radio
vcoubard 1131:692ddf04fc42 320 * due to the higher data transmit rate.
vcoubard 1131:692ddf04fc42 321 *
vcoubard 1176:8b308f971420 322 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 323 * Gap::setAdvertisingInterval(). A former call to
vcoubard 1156:e1ea38b576c6 324 * ble.setAdvertisingInterval(...) should be replaced with
vcoubard 1156:e1ea38b576c6 325 * ble.gap().setAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 326 *
vcoubard 1156:e1ea38b576c6 327 * @note WARNING: This API previously used 0.625ms as the unit for its
vcoubard 1131:692ddf04fc42 328 * 'interval' argument. That required an explicit conversion from
vcoubard 1131:692ddf04fc42 329 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard 1131:692ddf04fc42 330 * no longer required as the new units are milliseconds. Any application
vcoubard 1131:692ddf04fc42 331 * code depending on the old semantics needs to be updated accordingly.
vcoubard 1131:692ddf04fc42 332 */
vcoubard 1131:692ddf04fc42 333 void setAdvertisingInterval(uint16_t interval) {
vcoubard 1131:692ddf04fc42 334 gap().setAdvertisingInterval(interval);
vcoubard 1131:692ddf04fc42 335 }
vcoubard 1131:692ddf04fc42 336
vcoubard 1131:692ddf04fc42 337 /**
vcoubard 1131:692ddf04fc42 338 * @return Minimum Advertising interval in milliseconds.
vcoubard 1131:692ddf04fc42 339 *
vcoubard 1176:8b308f971420 340 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 341 * Gap::getMinAdvertisingInterval(). A former call to
vcoubard 1156:e1ea38b576c6 342 * ble.getMinAdvertisingInterval(...) should be replaced with
vcoubard 1156:e1ea38b576c6 343 * ble.gap().getMinAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 344 */
vcoubard 1131:692ddf04fc42 345 uint16_t getMinAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 346 return gap().getMinAdvertisingInterval();
vcoubard 1131:692ddf04fc42 347 }
vcoubard 1131:692ddf04fc42 348
vcoubard 1131:692ddf04fc42 349 /**
vcoubard 1131:692ddf04fc42 350 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
vcoubard 1131:692ddf04fc42 351 *
vcoubard 1176:8b308f971420 352 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 353 * Gap::MinNonConnectableAdvertisingInterval(). A former call to
vcoubard 1156:e1ea38b576c6 354 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
vcoubard 1156:e1ea38b576c6 355 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 356 */
vcoubard 1131:692ddf04fc42 357 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 358 return gap().getMinNonConnectableAdvertisingInterval();
vcoubard 1131:692ddf04fc42 359 }
vcoubard 1131:692ddf04fc42 360
vcoubard 1131:692ddf04fc42 361 /**
vcoubard 1131:692ddf04fc42 362 * @return Maximum Advertising interval in milliseconds.
vcoubard 1131:692ddf04fc42 363 *
vcoubard 1176:8b308f971420 364 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 365 * Gap::getMaxAdvertisingInterval(). A former call to
vcoubard 1156:e1ea38b576c6 366 * ble.getMaxAdvertisingInterval(...) should be replaced with
vcoubard 1156:e1ea38b576c6 367 * ble.gap().getMaxAdvertisingInterval(...).
vcoubard 1131:692ddf04fc42 368 */
vcoubard 1131:692ddf04fc42 369 uint16_t getMaxAdvertisingInterval(void) const {
vcoubard 1131:692ddf04fc42 370 return gap().getMaxAdvertisingInterval();
vcoubard 1131:692ddf04fc42 371 }
vcoubard 1131:692ddf04fc42 372
vcoubard 1131:692ddf04fc42 373 /**
vcoubard 1131:692ddf04fc42 374 * @param[in] timeout
vcoubard 1131:692ddf04fc42 375 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard 1131:692ddf04fc42 376 * and 16383). Use 0 to disable the advertising timeout.
vcoubard 1131:692ddf04fc42 377 *
vcoubard 1176:8b308f971420 378 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 379 * Gap::setAdvertisingTimeout(). A former call to
vcoubard 1156:e1ea38b576c6 380 * ble.setAdvertisingTimeout(...) should be replaced with
vcoubard 1156:e1ea38b576c6 381 * ble.gap().setAdvertisingTimeout(...).
vcoubard 1131:692ddf04fc42 382 */
vcoubard 1131:692ddf04fc42 383 void setAdvertisingTimeout(uint16_t timeout) {
vcoubard 1131:692ddf04fc42 384 gap().setAdvertisingTimeout(timeout);
vcoubard 1131:692ddf04fc42 385 }
vcoubard 1131:692ddf04fc42 386
vcoubard 1131:692ddf04fc42 387 /**
vcoubard 1131:692ddf04fc42 388 * Set up a particular, user-constructed set of advertisement parameters for
vcoubard 1131:692ddf04fc42 389 * the underlying stack. It would be uncommon for this API to be used
vcoubard 1131:692ddf04fc42 390 * directly; there are other APIs to tweak advertisement parameters
vcoubard 1131:692ddf04fc42 391 * individually (see above).
vcoubard 1131:692ddf04fc42 392 *
vcoubard 1176:8b308f971420 393 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 394 * Gap::setAdvertisingParams(). A former call to
vcoubard 1156:e1ea38b576c6 395 * ble.setAdvertisingParams(...) should be replaced with
vcoubard 1156:e1ea38b576c6 396 * ble.gap().setAdvertisingParams(...).
vcoubard 1131:692ddf04fc42 397 */
vcoubard 1131:692ddf04fc42 398 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
vcoubard 1131:692ddf04fc42 399 gap().setAdvertisingParams(advParams);
vcoubard 1131:692ddf04fc42 400 }
vcoubard 1131:692ddf04fc42 401
vcoubard 1131:692ddf04fc42 402 /**
vcoubard 1131:692ddf04fc42 403 * @return Read back advertising parameters. Useful for storing and
vcoubard 1131:692ddf04fc42 404 * restoring parameters rapidly.
vcoubard 1131:692ddf04fc42 405 *
vcoubard 1176:8b308f971420 406 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 407 * Gap::getAdvertisingParams(). A former call to
vcoubard 1156:e1ea38b576c6 408 * ble.getAdvertisingParams(...) should be replaced with
vcoubard 1156:e1ea38b576c6 409 * ble.gap().getAdvertisingParams(...).
vcoubard 1131:692ddf04fc42 410 */
vcoubard 1131:692ddf04fc42 411 const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard 1131:692ddf04fc42 412 return gap().getAdvertisingParams();
vcoubard 1131:692ddf04fc42 413 }
vcoubard 1131:692ddf04fc42 414
vcoubard 1131:692ddf04fc42 415 /**
vcoubard 1131:692ddf04fc42 416 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 417 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 418 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 419 * small.
vcoubard 1131:692ddf04fc42 420 *
vcoubard 1131:692ddf04fc42 421 * @param[in] flags
vcoubard 1131:692ddf04fc42 422 * The flags to add. Please refer to
vcoubard 1131:692ddf04fc42 423 * GapAdvertisingData::Flags for valid flags. Multiple
vcoubard 1131:692ddf04fc42 424 * flags may be specified in combination.
vcoubard 1131:692ddf04fc42 425 *
vcoubard 1176:8b308f971420 426 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 427 * Gap::accumulateAdvertisingPayload(uint8_t). A former call to
vcoubard 1156:e1ea38b576c6 428 * ble.accumulateAdvertisingPayload(flags) should be replaced with
vcoubard 1156:e1ea38b576c6 429 * ble.gap().accumulateAdvertisingPayload(flags).
vcoubard 1131:692ddf04fc42 430 */
vcoubard 1131:692ddf04fc42 431 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard 1131:692ddf04fc42 432 return gap().accumulateAdvertisingPayload(flags);
vcoubard 1131:692ddf04fc42 433 }
vcoubard 1131:692ddf04fc42 434
vcoubard 1131:692ddf04fc42 435 /**
vcoubard 1131:692ddf04fc42 436 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 437 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 438 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 439 * small.
vcoubard 1131:692ddf04fc42 440 *
vcoubard 1131:692ddf04fc42 441 * @param[in] app
vcoubard 1131:692ddf04fc42 442 * The appearance of the peripheral.
vcoubard 1131:692ddf04fc42 443 *
vcoubard 1176:8b308f971420 444 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 445 * Gap::accumulateAdvertisingPayload(GapAdvertisingData::Appearance).
vcoubard 1176:8b308f971420 446 * A former call to ble.accumulateAdvertisingPayload(appearance)
vcoubard 1176:8b308f971420 447 * should be replaced with
vcoubard 1156:e1ea38b576c6 448 * ble.gap().accumulateAdvertisingPayload(appearance).
vcoubard 1131:692ddf04fc42 449 */
vcoubard 1131:692ddf04fc42 450 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard 1131:692ddf04fc42 451 return gap().accumulateAdvertisingPayload(app);
vcoubard 1131:692ddf04fc42 452 }
vcoubard 1131:692ddf04fc42 453
vcoubard 1131:692ddf04fc42 454 /**
vcoubard 1131:692ddf04fc42 455 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1131:692ddf04fc42 456 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1131:692ddf04fc42 457 * as an additional 31 bytes if the advertising payload is too
vcoubard 1131:692ddf04fc42 458 * small.
vcoubard 1131:692ddf04fc42 459 *
vcoubard 1156:e1ea38b576c6 460 * @param[in] power
vcoubard 1131:692ddf04fc42 461 * The max transmit power to be used by the controller. This
vcoubard 1131:692ddf04fc42 462 * is only a hint.
vcoubard 1131:692ddf04fc42 463 *
vcoubard 1176:8b308f971420 464 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 465 * Gap::accumulateAdvertisingPayloadTxPower(). A former call to
vcoubard 1156:e1ea38b576c6 466 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
vcoubard 1156:e1ea38b576c6 467 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
vcoubard 1131:692ddf04fc42 468 */
vcoubard 1131:692ddf04fc42 469 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard 1131:692ddf04fc42 470 return gap().accumulateAdvertisingPayloadTxPower(power);
vcoubard 1131:692ddf04fc42 471 }
vcoubard 1131:692ddf04fc42 472
vcoubard 1131:692ddf04fc42 473 /**
vcoubard 1131:692ddf04fc42 474 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1131:692ddf04fc42 475 * advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard 1131:692ddf04fc42 476 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1131:692ddf04fc42 477 * advertising payload is too small.
vcoubard 1131:692ddf04fc42 478 *
vcoubard 1131:692ddf04fc42 479 * @param type The type that describes the variable length data.
vcoubard 1131:692ddf04fc42 480 * @param data Data bytes.
vcoubard 1131:692ddf04fc42 481 * @param len Data length.
vcoubard 1131:692ddf04fc42 482 *
vcoubard 1176:8b308f971420 483 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 484 * Gap::accumulateAdvertisingPayload(GapAdvertisingData::DataType, const uint8_t, uint8_t).
vcoubard 1176:8b308f971420 485 * A former call to ble.accumulateAdvertisingPayload(...) should
vcoubard 1176:8b308f971420 486 * be replaced with ble.gap().accumulateAdvertisingPayload(...).
vcoubard 1131:692ddf04fc42 487 */
vcoubard 1131:692ddf04fc42 488 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1131:692ddf04fc42 489 return gap().accumulateAdvertisingPayload(type, data, len);
vcoubard 1131:692ddf04fc42 490 }
vcoubard 1131:692ddf04fc42 491
vcoubard 1131:692ddf04fc42 492 /**
vcoubard 1131:692ddf04fc42 493 * Setup a particular, user-constructed advertisement payload for the
vcoubard 1131:692ddf04fc42 494 * underlying stack. It would be uncommon for this API to be used directly;
vcoubard 1131:692ddf04fc42 495 * there are other APIs to build an advertisement payload (see above).
vcoubard 1131:692ddf04fc42 496 *
vcoubard 1176:8b308f971420 497 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 498 * Gap::setAdvertisingData(). A former call to
vcoubard 1156:e1ea38b576c6 499 * ble.setAdvertisingData(...) should be replaced with
vcoubard 1156:e1ea38b576c6 500 * ble.gap().setAdvertisingPayload(...).
vcoubard 1131:692ddf04fc42 501 */
vcoubard 1131:692ddf04fc42 502 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
vcoubard 1131:692ddf04fc42 503 return gap().setAdvertisingPayload(advData);
vcoubard 1131:692ddf04fc42 504 }
vcoubard 1131:692ddf04fc42 505
vcoubard 1131:692ddf04fc42 506 /**
vcoubard 1131:692ddf04fc42 507 * @return Read back advertising data. Useful for storing and
vcoubard 1131:692ddf04fc42 508 * restoring payload.
vcoubard 1131:692ddf04fc42 509 *
vcoubard 1176:8b308f971420 510 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 511 * Gap::getAdvertisingData(). A former call to
vcoubard 1156:e1ea38b576c6 512 * ble.getAdvertisingData(...) should be replaced with
vcoubard 1156:e1ea38b576c6 513 * ble.gap().getAdvertisingPayload()(...).
vcoubard 1131:692ddf04fc42 514 */
vcoubard 1131:692ddf04fc42 515 const GapAdvertisingData &getAdvertisingData(void) const {
vcoubard 1131:692ddf04fc42 516 return gap().getAdvertisingPayload();
vcoubard 1131:692ddf04fc42 517 }
vcoubard 1131:692ddf04fc42 518
vcoubard 1131:692ddf04fc42 519 /**
vcoubard 1131:692ddf04fc42 520 * Reset any advertising payload prepared from prior calls to
vcoubard 1131:692ddf04fc42 521 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1131:692ddf04fc42 522 * initialized advertising payload to the underlying stack.
vcoubard 1131:692ddf04fc42 523 *
vcoubard 1176:8b308f971420 524 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 525 * Gap::clearAdvertisingPayload(). A former call to
vcoubard 1156:e1ea38b576c6 526 * ble.clearAdvertisingPayload(...) should be replaced with
vcoubard 1156:e1ea38b576c6 527 * ble.gap().clearAdvertisingPayload(...).
vcoubard 1131:692ddf04fc42 528 */
vcoubard 1131:692ddf04fc42 529 void clearAdvertisingPayload(void) {
vcoubard 1131:692ddf04fc42 530 gap().clearAdvertisingPayload();
vcoubard 1131:692ddf04fc42 531 }
vcoubard 1131:692ddf04fc42 532
vcoubard 1131:692ddf04fc42 533 /**
vcoubard 1156:e1ea38b576c6 534 * Dynamically reset the accumulated advertising
vcoubard 1156:e1ea38b576c6 535 * payload and scanResponse. The application must clear and re-
vcoubard 1156:e1ea38b576c6 536 * accumulates a new advertising payload (and scanResponse) before using this
vcoubard 1156:e1ea38b576c6 537 * API.
vcoubard 1131:692ddf04fc42 538 *
vcoubard 1156:e1ea38b576c6 539 * @return BLE_ERROR_NONE when the advertising payload is set successfully.
vcoubard 1156:e1ea38b576c6 540 *
vcoubard 1176:8b308f971420 541 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 542 * Gap::setAdvertisingPayload().
vcoubard 1156:e1ea38b576c6 543 *
vcoubard 1156:e1ea38b576c6 544 * @note The new APIs in Gap update the underlying advertisement payload
vcoubard 1131:692ddf04fc42 545 * implicitly.
vcoubard 1131:692ddf04fc42 546 */
vcoubard 1131:692ddf04fc42 547 ble_error_t setAdvertisingPayload(void) {
vcoubard 1131:692ddf04fc42 548 return BLE_ERROR_NONE;
vcoubard 1131:692ddf04fc42 549 }
vcoubard 1131:692ddf04fc42 550
vcoubard 1131:692ddf04fc42 551 /**
vcoubard 1131:692ddf04fc42 552 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1131:692ddf04fc42 553 * scanResponse payload.
vcoubard 1131:692ddf04fc42 554 *
vcoubard 1131:692ddf04fc42 555 * @param[in] type The type that describes the variable length data.
vcoubard 1131:692ddf04fc42 556 * @param[in] data Data bytes.
vcoubard 1131:692ddf04fc42 557 * @param[in] len Data length.
vcoubard 1131:692ddf04fc42 558 *
vcoubard 1176:8b308f971420 559 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 560 * Gap::accumulateScanResponse(). A former call to
vcoubard 1156:e1ea38b576c6 561 * ble.accumulateScanResponse(...) should be replaced with
vcoubard 1156:e1ea38b576c6 562 * ble.gap().accumulateScanResponse(...).
vcoubard 1131:692ddf04fc42 563 */
vcoubard 1131:692ddf04fc42 564 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1131:692ddf04fc42 565 return gap().accumulateScanResponse(type, data, len);
vcoubard 1131:692ddf04fc42 566 }
vcoubard 1131:692ddf04fc42 567
vcoubard 1131:692ddf04fc42 568 /**
vcoubard 1131:692ddf04fc42 569 * Reset any scan response prepared from prior calls to
vcoubard 1131:692ddf04fc42 570 * accumulateScanResponse().
vcoubard 1131:692ddf04fc42 571 *
vcoubard 1176:8b308f971420 572 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 573 * Gap::clearScanResponse(). A former call to
vcoubard 1156:e1ea38b576c6 574 * ble.clearScanResponse(...) should be replaced with
vcoubard 1156:e1ea38b576c6 575 * ble.gap().clearScanResponse(...).
vcoubard 1131:692ddf04fc42 576 */
vcoubard 1131:692ddf04fc42 577 void clearScanResponse(void) {
vcoubard 1131:692ddf04fc42 578 gap().clearScanResponse();
vcoubard 1131:692ddf04fc42 579 }
vcoubard 1131:692ddf04fc42 580
vcoubard 1131:692ddf04fc42 581 /**
vcoubard 1131:692ddf04fc42 582 * Start advertising.
vcoubard 1131:692ddf04fc42 583 *
vcoubard 1176:8b308f971420 584 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 585 * Gap::startAdvertising(). A former call to
vcoubard 1156:e1ea38b576c6 586 * ble.startAdvertising(...) should be replaced with
vcoubard 1156:e1ea38b576c6 587 * ble.gap().startAdvertising(...).
vcoubard 1131:692ddf04fc42 588 */
vcoubard 1131:692ddf04fc42 589 ble_error_t startAdvertising(void) {
vcoubard 1131:692ddf04fc42 590 return gap().startAdvertising();
vcoubard 1131:692ddf04fc42 591 }
vcoubard 1131:692ddf04fc42 592
vcoubard 1131:692ddf04fc42 593 /**
vcoubard 1131:692ddf04fc42 594 * Stop advertising.
vcoubard 1131:692ddf04fc42 595 *
vcoubard 1176:8b308f971420 596 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 597 * Gap::stopAdvertising(). A former call to
vcoubard 1156:e1ea38b576c6 598 * ble.stopAdvertising(...) should be replaced with
vcoubard 1156:e1ea38b576c6 599 * ble.gap().stopAdvertising(...).
vcoubard 1131:692ddf04fc42 600 */
vcoubard 1131:692ddf04fc42 601 ble_error_t stopAdvertising(void) {
vcoubard 1131:692ddf04fc42 602 return gap().stopAdvertising();
vcoubard 1131:692ddf04fc42 603 }
vcoubard 1131:692ddf04fc42 604
vcoubard 1131:692ddf04fc42 605 /**
vcoubard 1131:692ddf04fc42 606 * Set up parameters for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 607 * @param[in] interval
vcoubard 1131:692ddf04fc42 608 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 609 * @param[in] window
vcoubard 1131:692ddf04fc42 610 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 611 * @param[in] timeout
vcoubard 1131:692ddf04fc42 612 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard 1131:692ddf04fc42 613 * @param[in] activeScanning
vcoubard 1131:692ddf04fc42 614 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1131:692ddf04fc42 615 * scan response from a peer if possible.
vcoubard 1131:692ddf04fc42 616 *
vcoubard 1131:692ddf04fc42 617 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 618 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 619 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 620 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 621 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 622 * interval.
vcoubard 1131:692ddf04fc42 623 *
vcoubard 1131:692ddf04fc42 624 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 625 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 626 *
vcoubard 1156:e1ea38b576c6 627 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1131:692ddf04fc42 628 *
vcoubard 1176:8b308f971420 629 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 630 * Gap::setScanParams(). A former call to
vcoubard 1156:e1ea38b576c6 631 * ble.setScanParams(...) should be replaced with
vcoubard 1156:e1ea38b576c6 632 * ble.gap().setScanParams(...).
vcoubard 1131:692ddf04fc42 633 */
vcoubard 1131:692ddf04fc42 634 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard 1131:692ddf04fc42 635 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard 1131:692ddf04fc42 636 uint16_t timeout = 0,
vcoubard 1131:692ddf04fc42 637 bool activeScanning = false) {
vcoubard 1131:692ddf04fc42 638 return gap().setScanParams(interval, window, timeout, activeScanning);
vcoubard 1131:692ddf04fc42 639 }
vcoubard 1131:692ddf04fc42 640
vcoubard 1131:692ddf04fc42 641 /**
vcoubard 1131:692ddf04fc42 642 * Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 643 * @param[in] interval
vcoubard 1131:692ddf04fc42 644 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 645 *
vcoubard 1131:692ddf04fc42 646 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 647 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 648 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 649 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 650 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 651 * interval.
vcoubard 1131:692ddf04fc42 652 *
vcoubard 1131:692ddf04fc42 653 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 654 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 655 *
vcoubard 1176:8b308f971420 656 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 657 * Gap::setScanInterval(). A former call to
vcoubard 1156:e1ea38b576c6 658 * ble.setScanInterval(interval) should be replaced with
vcoubard 1156:e1ea38b576c6 659 * ble.gap().setScanInterval(interval).
vcoubard 1131:692ddf04fc42 660 */
vcoubard 1131:692ddf04fc42 661 ble_error_t setScanInterval(uint16_t interval) {
vcoubard 1131:692ddf04fc42 662 return gap().setScanInterval(interval);
vcoubard 1131:692ddf04fc42 663 }
vcoubard 1131:692ddf04fc42 664
vcoubard 1131:692ddf04fc42 665 /**
vcoubard 1131:692ddf04fc42 666 * Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 667 * @param[in] window
vcoubard 1131:692ddf04fc42 668 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1131:692ddf04fc42 669 *
vcoubard 1131:692ddf04fc42 670 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 671 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 672 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 673 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 674 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 675 * interval.
vcoubard 1131:692ddf04fc42 676 *
vcoubard 1131:692ddf04fc42 677 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 678 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 679 *
vcoubard 1176:8b308f971420 680 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 681 * Gap::setScanWindow(). A former call to
vcoubard 1156:e1ea38b576c6 682 * ble.setScanWindow(window) should be replaced with
vcoubard 1156:e1ea38b576c6 683 * ble.gap().setScanWindow(window).
vcoubard 1131:692ddf04fc42 684 */
vcoubard 1131:692ddf04fc42 685 ble_error_t setScanWindow(uint16_t window) {
vcoubard 1131:692ddf04fc42 686 return gap().setScanWindow(window);
vcoubard 1131:692ddf04fc42 687 }
vcoubard 1131:692ddf04fc42 688
vcoubard 1131:692ddf04fc42 689 /**
vcoubard 1131:692ddf04fc42 690 * Set up parameters for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 691 * @param[in] timeout
vcoubard 1131:692ddf04fc42 692 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard 1131:692ddf04fc42 693 *
vcoubard 1131:692ddf04fc42 694 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1131:692ddf04fc42 695 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1131:692ddf04fc42 696 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1131:692ddf04fc42 697 * to have the interval and window set to the same value. In this case,
vcoubard 1131:692ddf04fc42 698 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1131:692ddf04fc42 699 * interval.
vcoubard 1131:692ddf04fc42 700 *
vcoubard 1131:692ddf04fc42 701 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 702 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 703 *
vcoubard 1156:e1ea38b576c6 704 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1131:692ddf04fc42 705 *
vcoubard 1176:8b308f971420 706 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 707 * Gap::setScanTimeout(). A former call to
vcoubard 1156:e1ea38b576c6 708 * ble.setScanTimeout(...) should be replaced with
vcoubard 1156:e1ea38b576c6 709 * ble.gap().setScanTimeout(...).
vcoubard 1131:692ddf04fc42 710 */
vcoubard 1131:692ddf04fc42 711 ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard 1131:692ddf04fc42 712 return gap().setScanTimeout(timeout);
vcoubard 1131:692ddf04fc42 713 }
vcoubard 1131:692ddf04fc42 714
vcoubard 1131:692ddf04fc42 715 /**
vcoubard 1131:692ddf04fc42 716 * Set up parameters for GAP scanning (observer mode).
vcoubard 1131:692ddf04fc42 717 * @param[in] activeScanning
vcoubard 1131:692ddf04fc42 718 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1131:692ddf04fc42 719 * scan response from a peer if possible.
vcoubard 1131:692ddf04fc42 720 *
vcoubard 1131:692ddf04fc42 721 * Once the scanning parameters have been configured, scanning can be
vcoubard 1131:692ddf04fc42 722 * enabled by using startScan().
vcoubard 1131:692ddf04fc42 723 *
vcoubard 1176:8b308f971420 724 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 725 * Gap::setActiveScan(). A former call to
vcoubard 1156:e1ea38b576c6 726 * ble.setActiveScan(...) should be replaced with
vcoubard 1156:e1ea38b576c6 727 * ble.gap().setActiveScanning(...).
vcoubard 1131:692ddf04fc42 728 */
vcoubard 1131:692ddf04fc42 729 void setActiveScan(bool activeScanning) {
vcoubard 1131:692ddf04fc42 730 gap().setActiveScanning(activeScanning);
vcoubard 1131:692ddf04fc42 731 }
vcoubard 1131:692ddf04fc42 732
vcoubard 1131:692ddf04fc42 733 /**
vcoubard 1131:692ddf04fc42 734 * Start scanning (Observer Procedure) based on the parameters currently in
vcoubard 1131:692ddf04fc42 735 * effect.
vcoubard 1131:692ddf04fc42 736 *
vcoubard 1131:692ddf04fc42 737 * @param[in] callback
vcoubard 1131:692ddf04fc42 738 * The application-specific callback to be invoked upon
vcoubard 1131:692ddf04fc42 739 * receiving every advertisement report. This can be passed in
vcoubard 1131:692ddf04fc42 740 * as NULL, in which case scanning may not be enabled at all.
vcoubard 1131:692ddf04fc42 741 *
vcoubard 1176:8b308f971420 742 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 743 * Gap::startScan(). A former call to
vcoubard 1156:e1ea38b576c6 744 * ble.startScan(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 745 * ble.gap().startScan(callback).
vcoubard 1131:692ddf04fc42 746 */
vcoubard 1131:692ddf04fc42 747 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
vcoubard 1131:692ddf04fc42 748 return gap().startScan(callback);
vcoubard 1131:692ddf04fc42 749 }
vcoubard 1131:692ddf04fc42 750
vcoubard 1131:692ddf04fc42 751 /**
vcoubard 1131:692ddf04fc42 752 * Same as above, but this takes an (object, method) pair for a callback.
vcoubard 1131:692ddf04fc42 753 *
vcoubard 1176:8b308f971420 754 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 755 * Gap::startScan(). A former call to
vcoubard 1156:e1ea38b576c6 756 * ble.startScan(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 757 * ble.gap().startScan(object, callback).
vcoubard 1131:692ddf04fc42 758 */
vcoubard 1131:692ddf04fc42 759 template<typename T>
vcoubard 1131:692ddf04fc42 760 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
vcoubard 1131:692ddf04fc42 761
vcoubard 1131:692ddf04fc42 762 /**
vcoubard 1131:692ddf04fc42 763 * Stop scanning. The current scanning parameters remain in effect.
vcoubard 1131:692ddf04fc42 764 *
vcoubard 1131:692ddf04fc42 765 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard 1131:692ddf04fc42 766 *
vcoubard 1176:8b308f971420 767 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 768 * Gap::stopScan(). A former call to
vcoubard 1156:e1ea38b576c6 769 * ble.stopScan() should be replaced with
vcoubard 1156:e1ea38b576c6 770 * ble.gap().stopScan().
vcoubard 1131:692ddf04fc42 771 */
vcoubard 1131:692ddf04fc42 772 ble_error_t stopScan(void) {
vcoubard 1131:692ddf04fc42 773 return gap().stopScan();
vcoubard 1131:692ddf04fc42 774 }
vcoubard 1131:692ddf04fc42 775
vcoubard 1131:692ddf04fc42 776 /**
vcoubard 1131:692ddf04fc42 777 * Create a connection (GAP Link Establishment).
vcoubard 1131:692ddf04fc42 778 * @param peerAddr
vcoubard 1131:692ddf04fc42 779 * 48-bit address, LSB format.
vcoubard 1131:692ddf04fc42 780 * @param peerAddrType
vcoubard 1131:692ddf04fc42 781 * Address type of the peer.
vcoubard 1131:692ddf04fc42 782 * @param connectionParams
vcoubard 1131:692ddf04fc42 783 * Connection parameters.
vcoubard 1131:692ddf04fc42 784 * @param scanParams
vcoubard 1131:692ddf04fc42 785 * Paramters to use while scanning for the peer.
vcoubard 1131:692ddf04fc42 786 * @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard 1131:692ddf04fc42 787 * successfully. The onConnection callback (if set) is invoked upon
vcoubard 1131:692ddf04fc42 788 * a connection event.
vcoubard 1131:692ddf04fc42 789 *
vcoubard 1176:8b308f971420 790 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 791 * Gap::connect(). A former call to
vcoubard 1156:e1ea38b576c6 792 * ble.connect(...) should be replaced with
vcoubard 1156:e1ea38b576c6 793 * ble.gap().connect(...).
vcoubard 1131:692ddf04fc42 794 */
vcoubard 1135:22aada733dbd 795 ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1135:22aada733dbd 796 BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard 1135:22aada733dbd 797 const Gap::ConnectionParams_t *connectionParams = NULL,
vcoubard 1135:22aada733dbd 798 const GapScanningParams *scanParams = NULL) {
vcoubard 1131:692ddf04fc42 799 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
vcoubard 1131:692ddf04fc42 800 }
vcoubard 1131:692ddf04fc42 801
vcoubard 1131:692ddf04fc42 802 /**
vcoubard 1131:692ddf04fc42 803 * This call initiates the disconnection procedure, and its completion is
vcoubard 1131:692ddf04fc42 804 * communicated to the application with an invocation of the
vcoubard 1131:692ddf04fc42 805 * onDisconnection callback.
vcoubard 1131:692ddf04fc42 806 *
vcoubard 1131:692ddf04fc42 807 * @param[in] connectionHandle
vcoubard 1131:692ddf04fc42 808 * @param[in] reason
vcoubard 1131:692ddf04fc42 809 * The reason for disconnection; sent back to the peer.
vcoubard 1131:692ddf04fc42 810 */
vcoubard 1131:692ddf04fc42 811 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
vcoubard 1131:692ddf04fc42 812 return gap().disconnect(connectionHandle, reason);
vcoubard 1131:692ddf04fc42 813 }
vcoubard 1131:692ddf04fc42 814
vcoubard 1131:692ddf04fc42 815 /**
vcoubard 1135:22aada733dbd 816 * This call initiates the disconnection procedure, and its completion
vcoubard 1131:692ddf04fc42 817 * is communicated to the application with an invocation of the
vcoubard 1131:692ddf04fc42 818 * onDisconnection callback.
vcoubard 1131:692ddf04fc42 819 *
vcoubard 1131:692ddf04fc42 820 * @param reason
vcoubard 1131:692ddf04fc42 821 * The reason for disconnection; sent back to the peer.
vcoubard 1131:692ddf04fc42 822 *
vcoubard 1176:8b308f971420 823 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 824 * Gap::disconnect(). A former call to
vcoubard 1156:e1ea38b576c6 825 * ble.disconnect(reason) should be replaced with
vcoubard 1156:e1ea38b576c6 826 * ble.gap().disconnect(reason).
vcoubard 1131:692ddf04fc42 827 *
vcoubard 1156:e1ea38b576c6 828 * @note This version of disconnect() doesn't take a connection handle. It
vcoubard 1131:692ddf04fc42 829 * works reliably only for stacks that are limited to a single
vcoubard 1156:e1ea38b576c6 830 * connection.
vcoubard 1131:692ddf04fc42 831 */
vcoubard 1131:692ddf04fc42 832 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
vcoubard 1131:692ddf04fc42 833 return gap().disconnect(reason);
vcoubard 1131:692ddf04fc42 834 }
vcoubard 1131:692ddf04fc42 835
vcoubard 1131:692ddf04fc42 836 /**
vcoubard 1156:e1ea38b576c6 837 * Returns the current Gap state of the device using a bitmask that
vcoubard 1131:692ddf04fc42 838 * describes whether the device is advertising or connected.
vcoubard 1131:692ddf04fc42 839 *
vcoubard 1176:8b308f971420 840 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 841 * Gap::getState(). A former call to
vcoubard 1156:e1ea38b576c6 842 * ble.getGapState() should be replaced with
vcoubard 1156:e1ea38b576c6 843 * ble.gap().getState().
vcoubard 1131:692ddf04fc42 844 */
vcoubard 1131:692ddf04fc42 845 Gap::GapState_t getGapState(void) const {
vcoubard 1131:692ddf04fc42 846 return gap().getState();
vcoubard 1131:692ddf04fc42 847 }
vcoubard 1131:692ddf04fc42 848
vcoubard 1131:692ddf04fc42 849 /**
vcoubard 1131:692ddf04fc42 850 * Get the GAP peripheral's preferred connection parameters. These are the
vcoubard 1131:692ddf04fc42 851 * defaults that the peripheral would like to have in a connection. The
vcoubard 1131:692ddf04fc42 852 * choice of the connection parameters is eventually up to the central.
vcoubard 1131:692ddf04fc42 853 *
vcoubard 1131:692ddf04fc42 854 * @param[out] params
vcoubard 1131:692ddf04fc42 855 * The structure where the parameters will be stored. Memory
vcoubard 1131:692ddf04fc42 856 * for this is owned by the caller.
vcoubard 1131:692ddf04fc42 857 *
vcoubard 1131:692ddf04fc42 858 * @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard 1131:692ddf04fc42 859 * the given structure pointed to by params.
vcoubard 1131:692ddf04fc42 860 *
vcoubard 1176:8b308f971420 861 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 862 * Gap::getPreferredConnectionParams(). A former call to
vcoubard 1156:e1ea38b576c6 863 * ble.getPreferredConnectionParams() should be replaced with
vcoubard 1156:e1ea38b576c6 864 * ble.gap().getPreferredConnectionParams().
vcoubard 1131:692ddf04fc42 865 */
vcoubard 1131:692ddf04fc42 866 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 867 return gap().getPreferredConnectionParams(params);
vcoubard 1131:692ddf04fc42 868 }
vcoubard 1131:692ddf04fc42 869
vcoubard 1131:692ddf04fc42 870 /**
vcoubard 1131:692ddf04fc42 871 * Set the GAP peripheral's preferred connection parameters. These are the
vcoubard 1131:692ddf04fc42 872 * defaults that the peripheral would like to have in a connection. The
vcoubard 1131:692ddf04fc42 873 * choice of the connection parameters is eventually up to the central.
vcoubard 1131:692ddf04fc42 874 *
vcoubard 1131:692ddf04fc42 875 * @param[in] params
vcoubard 1131:692ddf04fc42 876 * The structure containing the desired parameters.
vcoubard 1131:692ddf04fc42 877 *
vcoubard 1176:8b308f971420 878 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 879 * Gap::setPreferredConnectionParams(). A former call to
vcoubard 1156:e1ea38b576c6 880 * ble.setPreferredConnectionParams() should be replaced with
vcoubard 1156:e1ea38b576c6 881 * ble.gap().setPreferredConnectionParams().
vcoubard 1131:692ddf04fc42 882 */
vcoubard 1131:692ddf04fc42 883 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 884 return gap().setPreferredConnectionParams(params);
vcoubard 1131:692ddf04fc42 885 }
vcoubard 1131:692ddf04fc42 886
vcoubard 1131:692ddf04fc42 887 /**
vcoubard 1131:692ddf04fc42 888 * Update connection parameters while in the peripheral role.
vcoubard 1131:692ddf04fc42 889 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
vcoubard 1131:692ddf04fc42 890 * the central to perform the procedure.
vcoubard 1131:692ddf04fc42 891 * @param[in] handle
vcoubard 1131:692ddf04fc42 892 * Connection Handle
vcoubard 1131:692ddf04fc42 893 * @param[in] params
vcoubard 1131:692ddf04fc42 894 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard 1131:692ddf04fc42 895 * the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard 1131:692ddf04fc42 896 *
vcoubard 1176:8b308f971420 897 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 898 * Gap::updateConnectionParams(). A former call to
vcoubard 1156:e1ea38b576c6 899 * ble.updateConnectionParams() should be replaced with
vcoubard 1156:e1ea38b576c6 900 * ble.gap().updateConnectionParams().
vcoubard 1131:692ddf04fc42 901 */
vcoubard 1131:692ddf04fc42 902 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
vcoubard 1131:692ddf04fc42 903 return gap().updateConnectionParams(handle, params);
vcoubard 1131:692ddf04fc42 904 }
vcoubard 1131:692ddf04fc42 905
vcoubard 1131:692ddf04fc42 906 /**
vcoubard 1156:e1ea38b576c6 907 * Set the device name characteristic in the Gap service.
vcoubard 1131:692ddf04fc42 908 * @param[in] deviceName
vcoubard 1131:692ddf04fc42 909 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard 1131:692ddf04fc42 910 *
vcoubard 1176:8b308f971420 911 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 912 * Gap::setDeviceName(). A former call to
vcoubard 1156:e1ea38b576c6 913 * ble.setDeviceName() should be replaced with
vcoubard 1156:e1ea38b576c6 914 * ble.gap().setDeviceName().
vcoubard 1131:692ddf04fc42 915 */
vcoubard 1131:692ddf04fc42 916 ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1131:692ddf04fc42 917 return gap().setDeviceName(deviceName);
vcoubard 1131:692ddf04fc42 918 }
vcoubard 1131:692ddf04fc42 919
vcoubard 1131:692ddf04fc42 920 /**
vcoubard 1156:e1ea38b576c6 921 * Get the value of the device name characteristic in the Gap service.
vcoubard 1131:692ddf04fc42 922 * @param[out] deviceName
vcoubard 1131:692ddf04fc42 923 * Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard 1131:692ddf04fc42 924 * terminated* string will be placed. Set this
vcoubard 1131:692ddf04fc42 925 * value to NULL in order to obtain the deviceName-length
vcoubard 1131:692ddf04fc42 926 * from the 'length' parameter.
vcoubard 1131:692ddf04fc42 927 *
vcoubard 1156:e1ea38b576c6 928 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 929 * (on input) Length of the buffer pointed to by deviceName;
vcoubard 1131:692ddf04fc42 930 * (on output) the complete device name length (without the
vcoubard 1131:692ddf04fc42 931 * null terminator).
vcoubard 1131:692ddf04fc42 932 *
vcoubard 1131:692ddf04fc42 933 * @note If the device name is longer than the size of the supplied buffer,
vcoubard 1131:692ddf04fc42 934 * length will return the complete device name length, and not the
vcoubard 1131:692ddf04fc42 935 * number of bytes actually returned in deviceName. The application may
vcoubard 1131:692ddf04fc42 936 * use this information to retry with a suitable buffer size.
vcoubard 1131:692ddf04fc42 937 *
vcoubard 1176:8b308f971420 938 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 939 * Gap::getDeviceName(). A former call to
vcoubard 1156:e1ea38b576c6 940 * ble.getDeviceName() should be replaced with
vcoubard 1156:e1ea38b576c6 941 * ble.gap().getDeviceName().
vcoubard 1131:692ddf04fc42 942 */
vcoubard 1131:692ddf04fc42 943 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
vcoubard 1131:692ddf04fc42 944 return gap().getDeviceName(deviceName, lengthP);
vcoubard 1131:692ddf04fc42 945 }
vcoubard 1131:692ddf04fc42 946
vcoubard 1131:692ddf04fc42 947 /**
vcoubard 1156:e1ea38b576c6 948 * Set the appearance characteristic in the Gap service.
vcoubard 1131:692ddf04fc42 949 * @param[in] appearance
vcoubard 1131:692ddf04fc42 950 * The new value for the device-appearance.
vcoubard 1131:692ddf04fc42 951 *
vcoubard 1176:8b308f971420 952 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 953 * Gap::setAppearance(). A former call to
vcoubard 1156:e1ea38b576c6 954 * ble.setAppearance() should be replaced with
vcoubard 1156:e1ea38b576c6 955 * ble.gap().setAppearance().
vcoubard 1131:692ddf04fc42 956 */
vcoubard 1131:692ddf04fc42 957 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1131:692ddf04fc42 958 return gap().setAppearance(appearance);
vcoubard 1131:692ddf04fc42 959 }
vcoubard 1131:692ddf04fc42 960
vcoubard 1131:692ddf04fc42 961 /**
vcoubard 1156:e1ea38b576c6 962 * Get the appearance characteristic in the Gap service.
vcoubard 1156:e1ea38b576c6 963 * @param[out] appearanceP
vcoubard 1131:692ddf04fc42 964 * The new value for the device-appearance.
vcoubard 1131:692ddf04fc42 965 *
vcoubard 1176:8b308f971420 966 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 967 * Gap::getAppearance(). A former call to
vcoubard 1156:e1ea38b576c6 968 * ble.getAppearance() should be replaced with
vcoubard 1156:e1ea38b576c6 969 * ble.gap().getAppearance().
vcoubard 1131:692ddf04fc42 970 */
vcoubard 1131:692ddf04fc42 971 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1131:692ddf04fc42 972 return gap().getAppearance(appearanceP);
vcoubard 1131:692ddf04fc42 973 }
vcoubard 1131:692ddf04fc42 974
vcoubard 1131:692ddf04fc42 975 /**
vcoubard 1131:692ddf04fc42 976 * Set the radio's transmit power.
vcoubard 1131:692ddf04fc42 977 * @param[in] txPower Radio transmit power in dBm.
vcoubard 1131:692ddf04fc42 978 *
vcoubard 1176:8b308f971420 979 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 980 * Gap::setTxPower(). A former call to
vcoubard 1156:e1ea38b576c6 981 * ble.setTxPower() should be replaced with
vcoubard 1156:e1ea38b576c6 982 * ble.gap().setTxPower().
vcoubard 1131:692ddf04fc42 983 */
vcoubard 1131:692ddf04fc42 984 ble_error_t setTxPower(int8_t txPower) {
vcoubard 1131:692ddf04fc42 985 return gap().setTxPower(txPower);
vcoubard 1131:692ddf04fc42 986 }
vcoubard 1131:692ddf04fc42 987
vcoubard 1131:692ddf04fc42 988 /**
vcoubard 1131:692ddf04fc42 989 * Query the underlying stack for permitted arguments for setTxPower().
vcoubard 1131:692ddf04fc42 990 *
vcoubard 1131:692ddf04fc42 991 * @param[out] valueArrayPP
vcoubard 1131:692ddf04fc42 992 * Out parameter to receive the immutable array of Tx values.
vcoubard 1131:692ddf04fc42 993 * @param[out] countP
vcoubard 1131:692ddf04fc42 994 * Out parameter to receive the array's size.
vcoubard 1131:692ddf04fc42 995 *
vcoubard 1176:8b308f971420 996 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 997 * Gap::getPermittedTxPowerValues(). A former call to
vcoubard 1156:e1ea38b576c6 998 * ble.getPermittedTxPowerValues() should be replaced with
vcoubard 1156:e1ea38b576c6 999 * ble.gap().getPermittedTxPowerValues().
vcoubard 1131:692ddf04fc42 1000 */
vcoubard 1131:692ddf04fc42 1001 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1131:692ddf04fc42 1002 gap().getPermittedTxPowerValues(valueArrayPP, countP);
vcoubard 1131:692ddf04fc42 1003 }
vcoubard 1131:692ddf04fc42 1004
vcoubard 1131:692ddf04fc42 1005 /**
vcoubard 1131:692ddf04fc42 1006 * Add a service declaration to the local server ATT table. Also add the
vcoubard 1131:692ddf04fc42 1007 * characteristics contained within.
vcoubard 1131:692ddf04fc42 1008 *
vcoubard 1176:8b308f971420 1009 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1010 * GattServer::addService(). A former call
vcoubard 1156:e1ea38b576c6 1011 * to ble.addService() should be replaced with
vcoubard 1156:e1ea38b576c6 1012 * ble.gattServer().addService().
vcoubard 1131:692ddf04fc42 1013 */
vcoubard 1131:692ddf04fc42 1014 ble_error_t addService(GattService &service) {
vcoubard 1131:692ddf04fc42 1015 return gattServer().addService(service);
vcoubard 1131:692ddf04fc42 1016 }
vcoubard 1131:692ddf04fc42 1017
vcoubard 1131:692ddf04fc42 1018 /**
vcoubard 1131:692ddf04fc42 1019 * Read the value of a characteristic from the local GattServer.
vcoubard 1131:692ddf04fc42 1020 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1021 * Attribute handle for the value attribute of the characteristic.
vcoubard 1131:692ddf04fc42 1022 * @param[out] buffer
vcoubard 1131:692ddf04fc42 1023 * A buffer to hold the value being read.
vcoubard 1156:e1ea38b576c6 1024 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 1025 * Length of the buffer being supplied. If the attribute
vcoubard 1131:692ddf04fc42 1026 * value is longer than the size of the supplied buffer,
vcoubard 1131:692ddf04fc42 1027 * this variable will return the total attribute value length
vcoubard 1131:692ddf04fc42 1028 * (excluding offset). The application may use this
vcoubard 1131:692ddf04fc42 1029 * information to allocate a suitable buffer size.
vcoubard 1131:692ddf04fc42 1030 *
vcoubard 1131:692ddf04fc42 1031 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard 1131:692ddf04fc42 1032 *
vcoubard 1176:8b308f971420 1033 * @deprecated You should use the parallel API from GattServer directly,
vcoubard 1176:8b308f971420 1034 * GattServer::read(GattAttribute::Handle_t,uint8_t,uint16_t). A former call
vcoubard 1156:e1ea38b576c6 1035 * to ble.readCharacteristicValue() should be replaced with
vcoubard 1156:e1ea38b576c6 1036 * ble.gattServer().read().
vcoubard 1131:692ddf04fc42 1037 */
vcoubard 1131:692ddf04fc42 1038 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
vcoubard 1131:692ddf04fc42 1039 return gattServer().read(attributeHandle, buffer, lengthP);
vcoubard 1131:692ddf04fc42 1040 }
vcoubard 1131:692ddf04fc42 1041
vcoubard 1131:692ddf04fc42 1042 /**
vcoubard 1131:692ddf04fc42 1043 * Read the value of a characteristic from the local GattServer.
vcoubard 1131:692ddf04fc42 1044 * @param[in] connectionHandle
vcoubard 1131:692ddf04fc42 1045 * Connection Handle.
vcoubard 1131:692ddf04fc42 1046 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1047 * Attribute handle for the value attribute of the characteristic.
vcoubard 1131:692ddf04fc42 1048 * @param[out] buffer
vcoubard 1131:692ddf04fc42 1049 * A buffer to hold the value being read.
vcoubard 1156:e1ea38b576c6 1050 * @param[in,out] lengthP
vcoubard 1131:692ddf04fc42 1051 * Length of the buffer being supplied. If the attribute
vcoubard 1131:692ddf04fc42 1052 * value is longer than the size of the supplied buffer,
vcoubard 1131:692ddf04fc42 1053 * this variable will return the total attribute value length
vcoubard 1131:692ddf04fc42 1054 * (excluding offset). The application may use this
vcoubard 1131:692ddf04fc42 1055 * information to allocate a suitable buffer size.
vcoubard 1131:692ddf04fc42 1056 *
vcoubard 1131:692ddf04fc42 1057 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard 1131:692ddf04fc42 1058 *
vcoubard 1131:692ddf04fc42 1059 * @note This API is a version of the above, with an additional connection handle
vcoubard 1131:692ddf04fc42 1060 * parameter to allow fetches for connection-specific multivalued
vcoubard 1131:692ddf04fc42 1061 * attributes (such as the CCCDs).
vcoubard 1131:692ddf04fc42 1062 *
vcoubard 1176:8b308f971420 1063 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1064 * GattServer::read(Gap::Handle_t,GattAttribute::Handle_t,uint8_t,uint16_t).
vcoubard 1176:8b308f971420 1065 * A former call to ble.readCharacteristicValue() should be replaced with
vcoubard 1156:e1ea38b576c6 1066 * ble.gattServer().read().
vcoubard 1131:692ddf04fc42 1067 */
vcoubard 1131:692ddf04fc42 1068 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
vcoubard 1131:692ddf04fc42 1069 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
vcoubard 1131:692ddf04fc42 1070 }
vcoubard 1131:692ddf04fc42 1071
vcoubard 1131:692ddf04fc42 1072 /**
vcoubard 1131:692ddf04fc42 1073 * Update the value of a characteristic on the local GattServer.
vcoubard 1131:692ddf04fc42 1074 *
vcoubard 1131:692ddf04fc42 1075 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1076 * Handle for the value attribute of the characteristic.
vcoubard 1131:692ddf04fc42 1077 * @param[in] value
vcoubard 1131:692ddf04fc42 1078 * A pointer to a buffer holding the new value.
vcoubard 1131:692ddf04fc42 1079 * @param[in] size
vcoubard 1131:692ddf04fc42 1080 * Size of the new value (in bytes).
vcoubard 1131:692ddf04fc42 1081 * @param[in] localOnly
vcoubard 1131:692ddf04fc42 1082 * Should this update be kept on the local
vcoubard 1131:692ddf04fc42 1083 * GattServer regardless of the state of the
vcoubard 1131:692ddf04fc42 1084 * notify/indicate flag in the CCCD for this
vcoubard 1131:692ddf04fc42 1085 * characteristic? If set to true, no notification
vcoubard 1131:692ddf04fc42 1086 * or indication is generated.
vcoubard 1131:692ddf04fc42 1087 *
vcoubard 1131:692ddf04fc42 1088 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard 1131:692ddf04fc42 1089 *
vcoubard 1176:8b308f971420 1090 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1091 * GattServer::write(GattAttribute::Handle_t,const uint8_t,uint16_t,bool).
vcoubard 1176:8b308f971420 1092 * A former call to ble.updateCharacteristicValue() should be replaced with
vcoubard 1156:e1ea38b576c6 1093 * ble.gattServer().write().
vcoubard 1131:692ddf04fc42 1094 */
vcoubard 1131:692ddf04fc42 1095 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
vcoubard 1131:692ddf04fc42 1096 const uint8_t *value,
vcoubard 1131:692ddf04fc42 1097 uint16_t size,
vcoubard 1131:692ddf04fc42 1098 bool localOnly = false) {
vcoubard 1131:692ddf04fc42 1099 return gattServer().write(attributeHandle, value, size, localOnly);
vcoubard 1131:692ddf04fc42 1100 }
vcoubard 1131:692ddf04fc42 1101
vcoubard 1131:692ddf04fc42 1102 /**
vcoubard 1131:692ddf04fc42 1103 * Update the value of a characteristic on the local GattServer. A version
vcoubard 1131:692ddf04fc42 1104 * of the above, with a connection handle parameter to allow updates
vcoubard 1131:692ddf04fc42 1105 * for connection-specific multivalued attributes (such as the CCCDs).
vcoubard 1131:692ddf04fc42 1106 *
vcoubard 1131:692ddf04fc42 1107 * @param[in] connectionHandle
vcoubard 1131:692ddf04fc42 1108 * Connection Handle.
vcoubard 1131:692ddf04fc42 1109 * @param[in] attributeHandle
vcoubard 1131:692ddf04fc42 1110 * Handle for the value attribute of the Characteristic.
vcoubard 1131:692ddf04fc42 1111 * @param[in] value
vcoubard 1131:692ddf04fc42 1112 * A pointer to a buffer holding the new value.
vcoubard 1131:692ddf04fc42 1113 * @param[in] size
vcoubard 1131:692ddf04fc42 1114 * Size of the new value (in bytes).
vcoubard 1131:692ddf04fc42 1115 * @param[in] localOnly
vcoubard 1131:692ddf04fc42 1116 * Should this update be kept on the local
vcoubard 1131:692ddf04fc42 1117 * GattServer regardless of the state of the
vcoubard 1131:692ddf04fc42 1118 * notify/indicate flag in the CCCD for this
vcoubard 1131:692ddf04fc42 1119 * Characteristic? If set to true, no notification
vcoubard 1131:692ddf04fc42 1120 * or indication is generated.
vcoubard 1131:692ddf04fc42 1121 *
vcoubard 1131:692ddf04fc42 1122 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard 1131:692ddf04fc42 1123 *
vcoubard 1176:8b308f971420 1124 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1125 * GattServer::write(Gap::Handle_t,GattAttribute::Handle_t,const uint8_t,uint16_t,bool).
vcoubard 1176:8b308f971420 1126 * A former call to ble.updateCharacteristicValue() should be replaced with
vcoubard 1156:e1ea38b576c6 1127 * ble.gattServer().write().
vcoubard 1131:692ddf04fc42 1128 */
vcoubard 1131:692ddf04fc42 1129 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
vcoubard 1131:692ddf04fc42 1130 GattAttribute::Handle_t attributeHandle,
vcoubard 1131:692ddf04fc42 1131 const uint8_t *value,
vcoubard 1131:692ddf04fc42 1132 uint16_t size,
vcoubard 1131:692ddf04fc42 1133 bool localOnly = false) {
vcoubard 1131:692ddf04fc42 1134 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
vcoubard 1131:692ddf04fc42 1135 }
vcoubard 1131:692ddf04fc42 1136
vcoubard 1131:692ddf04fc42 1137 /**
vcoubard 1131:692ddf04fc42 1138 * Enable the BLE stack's Security Manager. The Security Manager implements
vcoubard 1131:692ddf04fc42 1139 * the cryptographic algorithms and protocol exchanges that allow two
vcoubard 1131:692ddf04fc42 1140 * devices to securely exchange data and privately detect each other.
vcoubard 1131:692ddf04fc42 1141 * Calling this API is a prerequisite for encryption and pairing (bonding).
vcoubard 1131:692ddf04fc42 1142 *
vcoubard 1131:692ddf04fc42 1143 * @param[in] enableBonding Allow for bonding.
vcoubard 1131:692ddf04fc42 1144 * @param[in] requireMITM Require protection against man-in-the-middle attacks.
vcoubard 1131:692ddf04fc42 1145 * @param[in] iocaps To specify the I/O capabilities of this peripheral,
vcoubard 1131:692ddf04fc42 1146 * such as availability of a display or keyboard, to
vcoubard 1131:692ddf04fc42 1147 * support out-of-band exchanges of security data.
vcoubard 1131:692ddf04fc42 1148 * @param[in] passkey To specify a static passkey.
vcoubard 1131:692ddf04fc42 1149 *
vcoubard 1131:692ddf04fc42 1150 * @return BLE_ERROR_NONE on success.
vcoubard 1131:692ddf04fc42 1151 *
vcoubard 1176:8b308f971420 1152 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1153 * SecurityManager.init(). A former
vcoubard 1156:e1ea38b576c6 1154 * call to ble.initializeSecurity(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1155 * ble.securityManager().init(...).
vcoubard 1131:692ddf04fc42 1156 */
vcoubard 1131:692ddf04fc42 1157 ble_error_t initializeSecurity(bool enableBonding = true,
vcoubard 1131:692ddf04fc42 1158 bool requireMITM = true,
vcoubard 1131:692ddf04fc42 1159 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
vcoubard 1131:692ddf04fc42 1160 const SecurityManager::Passkey_t passkey = NULL) {
vcoubard 1131:692ddf04fc42 1161 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
vcoubard 1131:692ddf04fc42 1162 }
vcoubard 1131:692ddf04fc42 1163
vcoubard 1131:692ddf04fc42 1164 /**
vcoubard 1131:692ddf04fc42 1165 * Get the security status of a connection.
vcoubard 1131:692ddf04fc42 1166 *
vcoubard 1131:692ddf04fc42 1167 * @param[in] connectionHandle Handle to identify the connection.
vcoubard 1131:692ddf04fc42 1168 * @param[out] securityStatusP Security status.
vcoubard 1131:692ddf04fc42 1169 *
vcoubard 1131:692ddf04fc42 1170 * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
vcoubard 1131:692ddf04fc42 1171 *
vcoubard 1176:8b308f971420 1172 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1173 * SecurityManager::getLinkSecurity(). A former
vcoubard 1156:e1ea38b576c6 1174 * call to ble.getLinkSecurity(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1175 * ble.securityManager().getLinkSecurity(...).
vcoubard 1131:692ddf04fc42 1176 */
vcoubard 1131:692ddf04fc42 1177 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
vcoubard 1131:692ddf04fc42 1178 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
vcoubard 1131:692ddf04fc42 1179 }
vcoubard 1131:692ddf04fc42 1180
vcoubard 1131:692ddf04fc42 1181 /**
vcoubard 1131:692ddf04fc42 1182 * Delete all peer device context and all related bonding information from
vcoubard 1131:692ddf04fc42 1183 * the database within the security manager.
vcoubard 1131:692ddf04fc42 1184 *
vcoubard 1131:692ddf04fc42 1185 * @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
vcoubard 1131:692ddf04fc42 1186 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
vcoubard 1131:692ddf04fc42 1187 * application registration.
vcoubard 1131:692ddf04fc42 1188 *
vcoubard 1176:8b308f971420 1189 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1190 * SecurityManager::purgeAllBondingState(). A former
vcoubard 1156:e1ea38b576c6 1191 * call to ble.purgeAllBondingState() should be replaced with
vcoubard 1156:e1ea38b576c6 1192 * ble.securityManager().purgeAllBondingState().
vcoubard 1131:692ddf04fc42 1193 */
vcoubard 1131:692ddf04fc42 1194 ble_error_t purgeAllBondingState(void) {
vcoubard 1131:692ddf04fc42 1195 return securityManager().purgeAllBondingState();
vcoubard 1131:692ddf04fc42 1196 }
vcoubard 1131:692ddf04fc42 1197
vcoubard 1131:692ddf04fc42 1198 /**
vcoubard 1131:692ddf04fc42 1199 * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
vcoubard 1131:692ddf04fc42 1200 * possible event types.
vcoubard 1131:692ddf04fc42 1201 *
vcoubard 1176:8b308f971420 1202 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 1203 * Gap::onTimeout(). A former call
vcoubard 1156:e1ea38b576c6 1204 * to ble.onTimeout(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1205 * ble.gap().onTimeout(callback).
vcoubard 1131:692ddf04fc42 1206 */
vcoubard 1131:692ddf04fc42 1207 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
vcoubard 1131:692ddf04fc42 1208 gap().onTimeout(timeoutCallback);
vcoubard 1131:692ddf04fc42 1209 }
vcoubard 1131:692ddf04fc42 1210
vcoubard 1131:692ddf04fc42 1211 /**
vcoubard 1131:692ddf04fc42 1212 * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
vcoubard 1131:692ddf04fc42 1213 *
vcoubard 1176:8b308f971420 1214 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 1215 * Gap::onConnection(). A former call
vcoubard 1156:e1ea38b576c6 1216 * to ble.onConnection(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1217 * ble.gap().onConnection(callback).
vcoubard 1131:692ddf04fc42 1218 */
vcoubard 1131:692ddf04fc42 1219 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
vcoubard 1131:692ddf04fc42 1220 gap().onConnection(connectionCallback);
vcoubard 1131:692ddf04fc42 1221 }
vcoubard 1131:692ddf04fc42 1222
vcoubard 1131:692ddf04fc42 1223 /**
vcoubard 1131:692ddf04fc42 1224 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1131:692ddf04fc42 1225 *
vcoubard 1176:8b308f971420 1226 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 1227 * Gap::onDisconnection(). A former call
vcoubard 1156:e1ea38b576c6 1228 * to ble.onDisconnection(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1229 * ble.gap().onDisconnection(callback).
vcoubard 1131:692ddf04fc42 1230 */
vcoubard 1131:692ddf04fc42 1231 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
vcoubard 1131:692ddf04fc42 1232 gap().onDisconnection(disconnectionCallback);
vcoubard 1131:692ddf04fc42 1233 }
vcoubard 1131:692ddf04fc42 1234
vcoubard 1156:e1ea38b576c6 1235 /**
vcoubard 1156:e1ea38b576c6 1236 * The same as onDisconnection(), but allows an object reference and member function
vcoubard 1156:e1ea38b576c6 1237 * to be added to the chain of callbacks.
vcoubard 1156:e1ea38b576c6 1238 *
vcoubard 1176:8b308f971420 1239 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 1240 * Gap::onDisconnection(). A former call
vcoubard 1156:e1ea38b576c6 1241 * to ble.onDisconnection(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1242 * ble.gap().onDisconnection(callback).
vcoubard 1156:e1ea38b576c6 1243 */
vcoubard 1131:692ddf04fc42 1244 template<typename T>
vcoubard 1131:692ddf04fc42 1245 void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
vcoubard 1131:692ddf04fc42 1246 gap().onDisconnection(tptr, mptr);
vcoubard 1131:692ddf04fc42 1247 }
vcoubard 1131:692ddf04fc42 1248
vcoubard 1131:692ddf04fc42 1249 /**
vcoubard 1131:692ddf04fc42 1250 * Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard 1131:692ddf04fc42 1251 * (nACTIVE) signals from the stack. These notify the application when the
vcoubard 1131:692ddf04fc42 1252 * radio is in use. The signal is sent using software interrupt.
vcoubard 1131:692ddf04fc42 1253 *
vcoubard 1131:692ddf04fc42 1254 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1131:692ddf04fc42 1255 * signal is sent at the end of the radio event. These signals can be used
vcoubard 1131:692ddf04fc42 1256 * by the application programmer to synchronize application logic with radio
vcoubard 1131:692ddf04fc42 1257 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1131:692ddf04fc42 1258 * devices to manage peak current drawn during periods when the radio is on,
vcoubard 1131:692ddf04fc42 1259 * or to trigger sensor data collection for transmission in the radio event.
vcoubard 1131:692ddf04fc42 1260 *
vcoubard 1131:692ddf04fc42 1261 * @param callback
vcoubard 1131:692ddf04fc42 1262 * The application handler to be invoked in response to a radio
vcoubard 1131:692ddf04fc42 1263 * ACTIVE/INACTIVE event.
vcoubard 1131:692ddf04fc42 1264 *
vcoubard 1176:8b308f971420 1265 * @deprecated You should use the parallel API from Gap directly, refer to
vcoubard 1176:8b308f971420 1266 * Gap::onRadioNotification(). A former call
vcoubard 1156:e1ea38b576c6 1267 * to ble.onRadioNotification(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1268 * ble.gap().onRadioNotification(...).
vcoubard 1131:692ddf04fc42 1269 */
vcoubard 1131:692ddf04fc42 1270 void onRadioNotification(void (*callback)(bool)) {
vcoubard 1131:692ddf04fc42 1271 gap().onRadioNotification(callback);
vcoubard 1131:692ddf04fc42 1272 }
vcoubard 1131:692ddf04fc42 1273
vcoubard 1131:692ddf04fc42 1274 /**
vcoubard 1131:692ddf04fc42 1275 * Add a callback for the GATT event DATA_SENT (which is triggered when
vcoubard 1131:692ddf04fc42 1276 * updates are sent out by GATT in the form of notifications).
vcoubard 1131:692ddf04fc42 1277 *
vcoubard 1156:e1ea38b576c6 1278 * @note It is possible to chain together multiple onDataSent callbacks
vcoubard 1131:692ddf04fc42 1279 * (potentially from different modules of an application) to receive updates
vcoubard 1131:692ddf04fc42 1280 * to characteristics.
vcoubard 1131:692ddf04fc42 1281 *
vcoubard 1156:e1ea38b576c6 1282 * @note It is also possible to set up a callback into a member function of
vcoubard 1131:692ddf04fc42 1283 * some object.
vcoubard 1131:692ddf04fc42 1284 *
vcoubard 1176:8b308f971420 1285 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1286 * GattServer::onDataSent(). A former call
vcoubard 1156:e1ea38b576c6 1287 * to ble.onDataSent(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1288 * ble.gattServer().onDataSent(...).
vcoubard 1131:692ddf04fc42 1289 */
vcoubard 1131:692ddf04fc42 1290 void onDataSent(void (*callback)(unsigned count)) {
vcoubard 1131:692ddf04fc42 1291 gattServer().onDataSent(callback);
vcoubard 1131:692ddf04fc42 1292 }
vcoubard 1156:e1ea38b576c6 1293
vcoubard 1156:e1ea38b576c6 1294 /**
vcoubard 1156:e1ea38b576c6 1295 * The same as onDataSent(), but allows an object reference and member function
vcoubard 1156:e1ea38b576c6 1296 * to be added to the chain of callbacks.
vcoubard 1156:e1ea38b576c6 1297 *
vcoubard 1176:8b308f971420 1298 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1299 * GattServer::onDataSent(). A former call
vcoubard 1156:e1ea38b576c6 1300 * to ble.onDataSent(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1301 * ble.gattServer().onDataSent(...).
vcoubard 1156:e1ea38b576c6 1302 */
vcoubard 1131:692ddf04fc42 1303 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
vcoubard 1131:692ddf04fc42 1304 gattServer().onDataSent(objPtr, memberPtr);
vcoubard 1131:692ddf04fc42 1305 }
vcoubard 1131:692ddf04fc42 1306
vcoubard 1131:692ddf04fc42 1307 /**
vcoubard 1131:692ddf04fc42 1308 * Set up a callback for when an attribute has its value updated by or at the
vcoubard 1131:692ddf04fc42 1309 * connected peer. For a peripheral, this callback is triggered when the local
vcoubard 1131:692ddf04fc42 1310 * GATT server has an attribute updated by a write command from the peer.
vcoubard 1131:692ddf04fc42 1311 * For a Central, this callback is triggered when a response is received for
vcoubard 1131:692ddf04fc42 1312 * a write request.
vcoubard 1131:692ddf04fc42 1313 *
vcoubard 1156:e1ea38b576c6 1314 * @note It is possible to chain together multiple onDataWritten callbacks
vcoubard 1131:692ddf04fc42 1315 * (potentially from different modules of an application) to receive updates
vcoubard 1131:692ddf04fc42 1316 * to characteristics. Many services, such as DFU and UART, add their own
vcoubard 1131:692ddf04fc42 1317 * onDataWritten callbacks behind the scenes to trap interesting events.
vcoubard 1131:692ddf04fc42 1318 *
vcoubard 1156:e1ea38b576c6 1319 * @note It is also possible to set up a callback into a member function of
vcoubard 1131:692ddf04fc42 1320 * some object.
vcoubard 1131:692ddf04fc42 1321 *
vcoubard 1176:8b308f971420 1322 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1323 * GattServer::onDataWritten(). A former call
vcoubard 1156:e1ea38b576c6 1324 * to ble.onDataWritten(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1325 * ble.gattServer().onDataWritten(...).
vcoubard 1131:692ddf04fc42 1326 */
vcoubard 1131:692ddf04fc42 1327 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
vcoubard 1131:692ddf04fc42 1328 gattServer().onDataWritten(callback);
vcoubard 1131:692ddf04fc42 1329 }
vcoubard 1156:e1ea38b576c6 1330
vcoubard 1156:e1ea38b576c6 1331 /**
vcoubard 1156:e1ea38b576c6 1332 * The same as onDataWritten(), but allows an object reference and member function
vcoubard 1156:e1ea38b576c6 1333 * to be added to the chain of callbacks.
vcoubard 1156:e1ea38b576c6 1334 *
vcoubard 1176:8b308f971420 1335 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1336 * GattServer::onDataWritten(). A former call
vcoubard 1156:e1ea38b576c6 1337 * to ble.onDataWritten(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1338 * ble.gattServer().onDataWritten(...).
vcoubard 1156:e1ea38b576c6 1339 */
vcoubard 1131:692ddf04fc42 1340 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
vcoubard 1131:692ddf04fc42 1341 gattServer().onDataWritten(objPtr, memberPtr);
vcoubard 1131:692ddf04fc42 1342 }
vcoubard 1131:692ddf04fc42 1343
vcoubard 1131:692ddf04fc42 1344 /**
vcoubard 1131:692ddf04fc42 1345 * Set up a callback to be invoked on the peripheral when an attribute is
vcoubard 1131:692ddf04fc42 1346 * being read by a remote client.
vcoubard 1131:692ddf04fc42 1347 *
vcoubard 1156:e1ea38b576c6 1348 * @note This functionality may not be available on all underlying stacks.
vcoubard 1131:692ddf04fc42 1349 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
vcoubard 1131:692ddf04fc42 1350 * alternative.
vcoubard 1131:692ddf04fc42 1351 *
vcoubard 1156:e1ea38b576c6 1352 * @note It is possible to chain together multiple onDataRead callbacks
vcoubard 1131:692ddf04fc42 1353 * (potentially from different modules of an application) to receive updates
vcoubard 1131:692ddf04fc42 1354 * to characteristics. Services may add their own onDataRead callbacks
vcoubard 1131:692ddf04fc42 1355 * behind the scenes to trap interesting events.
vcoubard 1131:692ddf04fc42 1356 *
vcoubard 1156:e1ea38b576c6 1357 * @note It is also possible to set up a callback into a member function of
vcoubard 1131:692ddf04fc42 1358 * some object.
vcoubard 1131:692ddf04fc42 1359 *
vcoubard 1131:692ddf04fc42 1360 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
vcoubard 1131:692ddf04fc42 1361 * else BLE_ERROR_NONE.
vcoubard 1131:692ddf04fc42 1362 *
vcoubard 1176:8b308f971420 1363 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1364 * GattServer::onDataRead(). A former call
vcoubard 1156:e1ea38b576c6 1365 * to ble.onDataRead(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1366 * ble.gattServer().onDataRead(...).
vcoubard 1131:692ddf04fc42 1367 */
vcoubard 1131:692ddf04fc42 1368 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
vcoubard 1131:692ddf04fc42 1369 return gattServer().onDataRead(callback);
vcoubard 1131:692ddf04fc42 1370 }
vcoubard 1156:e1ea38b576c6 1371
vcoubard 1156:e1ea38b576c6 1372 /**
vcoubard 1156:e1ea38b576c6 1373 * The same as onDataRead(), but allows an object reference and member function
vcoubard 1156:e1ea38b576c6 1374 * to be added to the chain of callbacks.
vcoubard 1156:e1ea38b576c6 1375 *
vcoubard 1176:8b308f971420 1376 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1377 * GattServer::onDataRead(). A former call
vcoubard 1156:e1ea38b576c6 1378 * to ble.onDataRead(...) should be replaced with
vcoubard 1156:e1ea38b576c6 1379 * ble.gattServer().onDataRead(...).
vcoubard 1156:e1ea38b576c6 1380 */
vcoubard 1131:692ddf04fc42 1381 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
vcoubard 1131:692ddf04fc42 1382 return gattServer().onDataRead(objPtr, memberPtr);
vcoubard 1131:692ddf04fc42 1383 }
vcoubard 1131:692ddf04fc42 1384
vcoubard 1131:692ddf04fc42 1385 /**
vcoubard 1131:692ddf04fc42 1386 * Set up a callback for when notifications or indications are enabled for a
vcoubard 1131:692ddf04fc42 1387 * characteristic on the local GattServer.
vcoubard 1131:692ddf04fc42 1388 *
vcoubard 1176:8b308f971420 1389 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1390 * GattServer::onUpdatesEnabled(). A former call
vcoubard 1156:e1ea38b576c6 1391 * to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1392 * ble.gattServer().onUpdatesEnabled(callback).
vcoubard 1131:692ddf04fc42 1393 */
vcoubard 1131:692ddf04fc42 1394 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1395 gattServer().onUpdatesEnabled(callback);
vcoubard 1131:692ddf04fc42 1396 }
vcoubard 1131:692ddf04fc42 1397
vcoubard 1131:692ddf04fc42 1398 /**
vcoubard 1131:692ddf04fc42 1399 * Set up a callback for when notifications or indications are disabled for a
vcoubard 1131:692ddf04fc42 1400 * characteristic on the local GattServer.
vcoubard 1131:692ddf04fc42 1401 *
vcoubard 1176:8b308f971420 1402 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1403 * GattServer::onUpdatesDisabled(). A former call
vcoubard 1156:e1ea38b576c6 1404 * to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1405 * ble.gattServer().onUpdatesEnabled(callback).
vcoubard 1131:692ddf04fc42 1406 */
vcoubard 1131:692ddf04fc42 1407 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1408 gattServer().onUpdatesDisabled(callback);
vcoubard 1131:692ddf04fc42 1409 }
vcoubard 1131:692ddf04fc42 1410
vcoubard 1131:692ddf04fc42 1411 /**
vcoubard 1131:692ddf04fc42 1412 * Set up a callback for when the GATT server receives a response for an
vcoubard 1131:692ddf04fc42 1413 * indication event sent previously.
vcoubard 1131:692ddf04fc42 1414 *
vcoubard 1176:8b308f971420 1415 * @deprecated You should use the parallel API from GattServer directly, refer to
vcoubard 1176:8b308f971420 1416 * GattServer::onConfirmationReceived(). A former call
vcoubard 1156:e1ea38b576c6 1417 * to ble.onConfirmationReceived(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1418 * ble.gattServer().onConfirmationReceived(callback).
vcoubard 1131:692ddf04fc42 1419 */
vcoubard 1131:692ddf04fc42 1420 void onConfirmationReceived(GattServer::EventCallback_t callback) {
vcoubard 1131:692ddf04fc42 1421 gattServer().onConfirmationReceived(callback);
vcoubard 1131:692ddf04fc42 1422 }
vcoubard 1131:692ddf04fc42 1423
vcoubard 1131:692ddf04fc42 1424 /**
vcoubard 1131:692ddf04fc42 1425 * Set up a callback for when the security setup procedure (key generation
vcoubard 1131:692ddf04fc42 1426 * and exchange) for a link has started. This will be skipped for bonded
vcoubard 1131:692ddf04fc42 1427 * devices. The callback is passed in parameters received from the peer's
vcoubard 1131:692ddf04fc42 1428 * security request: bool allowBonding, bool requireMITM, and
vcoubard 1131:692ddf04fc42 1429 * SecurityIOCapabilities_t.
vcoubard 1131:692ddf04fc42 1430 *
vcoubard 1176:8b308f971420 1431 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1432 * SecurityManager::onSecuritySetupInitiated(). A former
vcoubard 1156:e1ea38b576c6 1433 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1434 * ble.securityManager().onSecuritySetupInitiated(callback).
vcoubard 1131:692ddf04fc42 1435 */
vcoubard 1131:692ddf04fc42 1436 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
vcoubard 1131:692ddf04fc42 1437 securityManager().onSecuritySetupInitiated(callback);
vcoubard 1131:692ddf04fc42 1438 }
vcoubard 1131:692ddf04fc42 1439
vcoubard 1131:692ddf04fc42 1440 /**
vcoubard 1131:692ddf04fc42 1441 * Set up a callback for when the security setup procedure (key generation
vcoubard 1131:692ddf04fc42 1442 * and exchange) for a link has completed. This will be skipped for bonded
vcoubard 1131:692ddf04fc42 1443 * devices. The callback is passed in the success/failure status of the
vcoubard 1131:692ddf04fc42 1444 * security setup procedure.
vcoubard 1131:692ddf04fc42 1445 *
vcoubard 1176:8b308f971420 1446 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1447 * SecurityManager::onSecuritySetupCompleted(). A former
vcoubard 1156:e1ea38b576c6 1448 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1449 * ble.securityManager().onSecuritySetupCompleted(callback).
vcoubard 1131:692ddf04fc42 1450 */
vcoubard 1131:692ddf04fc42 1451 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
vcoubard 1131:692ddf04fc42 1452 securityManager().onSecuritySetupCompleted(callback);
vcoubard 1131:692ddf04fc42 1453 }
vcoubard 1131:692ddf04fc42 1454
vcoubard 1131:692ddf04fc42 1455 /**
vcoubard 1131:692ddf04fc42 1456 * Set up a callback for when a link with the peer is secured. For bonded
vcoubard 1131:692ddf04fc42 1457 * devices, subsequent reconnections with a bonded peer will result only in
vcoubard 1131:692ddf04fc42 1458 * this callback when the link is secured, and setup procedures will not
vcoubard 1131:692ddf04fc42 1459 * occur unless the bonding information is either lost or deleted on either
vcoubard 1131:692ddf04fc42 1460 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
vcoubard 1131:692ddf04fc42 1461 * to the level of security in effect for the secured link.
vcoubard 1131:692ddf04fc42 1462 *
vcoubard 1176:8b308f971420 1463 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1464 * SecurityManager::onLinkSecured(). A former
vcoubard 1156:e1ea38b576c6 1465 * call to ble.onLinkSecured(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1466 * ble.securityManager().onLinkSecured(callback).
vcoubard 1131:692ddf04fc42 1467 */
vcoubard 1131:692ddf04fc42 1468 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
vcoubard 1131:692ddf04fc42 1469 securityManager().onLinkSecured(callback);
vcoubard 1131:692ddf04fc42 1470 }
vcoubard 1131:692ddf04fc42 1471
vcoubard 1131:692ddf04fc42 1472 /**
vcoubard 1131:692ddf04fc42 1473 * Set up a callback for successful bonding, meaning that link-specific security
vcoubard 1131:692ddf04fc42 1474 * context is stored persistently for a peer device.
vcoubard 1131:692ddf04fc42 1475 *
vcoubard 1176:8b308f971420 1476 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1477 * SecurityManager::onSecurityContextStored(). A former
vcoubard 1156:e1ea38b576c6 1478 * call to ble.onSecurityContextStored(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1479 * ble.securityManager().onSecurityContextStored(callback).
vcoubard 1131:692ddf04fc42 1480 */
vcoubard 1131:692ddf04fc42 1481 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
vcoubard 1131:692ddf04fc42 1482 securityManager().onSecurityContextStored(callback);
vcoubard 1131:692ddf04fc42 1483 }
vcoubard 1131:692ddf04fc42 1484
vcoubard 1131:692ddf04fc42 1485 /**
vcoubard 1131:692ddf04fc42 1486 * Set up a callback for when the passkey needs to be displayed on a
vcoubard 1131:692ddf04fc42 1487 * peripheral with DISPLAY capability. This happens when security is
vcoubard 1135:22aada733dbd 1488 * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
vcoubard 1131:692ddf04fc42 1489 * a passkey (or PIN) to authenticate the connection
vcoubard 1131:692ddf04fc42 1490 * attempt.
vcoubard 1131:692ddf04fc42 1491 *
vcoubard 1176:8b308f971420 1492 * @deprecated You should use the parallel API from SecurityManager directly, refer to
vcoubard 1176:8b308f971420 1493 * SecurityManager::onPasskeyDisplay(). A former
vcoubard 1156:e1ea38b576c6 1494 * call to ble.onPasskeyDisplay(callback) should be replaced with
vcoubard 1156:e1ea38b576c6 1495 * ble.securityManager().onPasskeyDisplay(callback).
vcoubard 1131:692ddf04fc42 1496 */
vcoubard 1131:692ddf04fc42 1497 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
vcoubard 1131:692ddf04fc42 1498 return securityManager().onPasskeyDisplay(callback);
vcoubard 1131:692ddf04fc42 1499 }
vcoubard 1131:692ddf04fc42 1500
vcoubard 1131:692ddf04fc42 1501 private:
vcoubard 1131:692ddf04fc42 1502 /**
vcoubard 1131:692ddf04fc42 1503 * Implementation of init() [internal to BLE_API].
vcoubard 1131:692ddf04fc42 1504 *
vcoubard 1131:692ddf04fc42 1505 * The implementation is separated into a private method because it isn't
vcoubard 1131:692ddf04fc42 1506 * suitable to be included in the header.
vcoubard 1131:692ddf04fc42 1507 */
vcoubard 1131:692ddf04fc42 1508 ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
vcoubard 1131:692ddf04fc42 1509
vcoubard 1131:692ddf04fc42 1510 private:
vcoubard 1131:692ddf04fc42 1511 BLE(const BLE&);
vcoubard 1131:692ddf04fc42 1512 BLE &operator=(const BLE &);
vcoubard 1131:692ddf04fc42 1513
vcoubard 1131:692ddf04fc42 1514 private:
vcoubard 1131:692ddf04fc42 1515 InstanceID_t instanceID;
vcoubard 1131:692ddf04fc42 1516 BLEInstanceBase *transport; /* The device-specific backend */
vcoubard 1131:692ddf04fc42 1517 };
vcoubard 1131:692ddf04fc42 1518
vcoubard 1156:e1ea38b576c6 1519 typedef BLE BLEDevice; /**< @deprecated This type alias is retained for the
vcoubard 1156:e1ea38b576c6 1520 * sake of compatibility with older
vcoubard 1131:692ddf04fc42 1521 * code. Will be dropped at some point soon.*/
vcoubard 1131:692ddf04fc42 1522
vcoubard 1176:8b308f971420 1523 #endif /* ifndef __BLE_H__ */